Western Coalfields Limited-WCL has published Maintenance Of Check Post Near Boom Barrier And Room For Mohan Oc Phase-Iv Office At Mohan Oc Of Mohan Colliery Under Ambara Sub Area . . Submission Date for this Tender is 15-06-2021. Gate Barrier Systems Tenders in Mohan Colliery Madhya Pradesh. Bidders can get complete Tender details and download the document.
Name of the Work / Contract No: | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Brick work with clay flyash F.P.S. (non modular) brick 1 of class designation 3.5 in foundation and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand). | 9 | Cum | |
2 | 2 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand). | 75 | Sqm | |
3 | 3 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate. | 17 | Sqm | |
4 | 4 | Providing and laying in position cement concrete of\nspecified grade excluding the cost of centering and\nshuttering - All work up to plinth level: 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). | 1.3 | Cum | |
5 | 5 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 10 | Sqm | |
6 | 6 | Total impact of GST for the purpose of CTC | BI01010001010000000000000515BI0100001129 | 1 | Nos |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail