Addition/Alteration And Special Repairs To Building No P-164 ( Squash Court ) , Armoury Building ( P-173 ) And Certain Garages At Ins Hamla Under Ge ( Nw ) Bhandup

Tender Notice

28033679
Corrigendum : Addition/Alteration And Special Repairs To Building No P-164 ( Squash Court ) , Armoury Building ( P-173 ) And Certain Garages At Ins Hamla Under Ge ( Nw ) Bhandup
Indian
Maharashtra
21-06-2021
28-06-2021
29-06-2021

Tender Details

Addition/Alteration And Special Repairs To Building No P-164 ( Squash Court ) , Armoury Building ( P-173 ) And Certain Garages At Ins Hamla Under Ge ( Nw ) Bhandup

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 21-Jun-2021 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 28-06-2021

Key Value

Document Fees
INR 500 /-
EMD
INR 88000.00 /-
Tender Value
INR 44 Lakhs /-

BOQ Items

NAME OF WORK: ADDITION/ALTERATION AND SPECIAL REPAIRS TO BUILDING NO P-164 (SQUASH COURT),ARMOURY BUILDING (P-173 ) AND CERTAIN GARAGES AT INS HAMLA UNDER GE(NW) BHANDUP
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified and directed. 380 Sqm
2 2 Demolition of cement concrete in ground floor / paving not exceeding 15Cm thick below or above GL unreinforced complete all as specified and directed. 18.5 Cum
3 3 M&L PCC 30mm thick type B0, 1 : 2 : 4 (12.5 mm graded aggregate) in sub flooring complete all as specified and directed. 215 Sqm
4 4 M&L PCC 100 mm thick type C2, 1 : 3 : 6 (20 mm graded aggregate) in flooring complete all as specified and directed. 105 Sqm
5 5 M&L vitrified ceramic tiles 10mm thick dark shade (Square / rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors over and including provision of cement screed bedding layer 20 mm thick in CM 1 : 4 etc set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed. 110 Sqm
6 6 All as above dark shade but over and including provision of screed bedding 10mm thick in CM 1 : 3 in vertical surface complete all as specified and directed. 9 Sqm
7 7 M&L glazed ceramic jointless coloured tiles in vertical surface 350 x 250 x 7mm / 450 x 350 x 7mm set and jointed in neat cement slurry over and including provision of backing layer 10mm thick in CM 1 : 3 complete all as specified and directed. 35 Sqm
8 8 Material and Labour non skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not excceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and directed. 15 Sqm
9 9 M & L for Machine cut Kota stone slab flooring 20-25mm thick over and including provision of screed bed 20 mm thick in CM1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & mirror polishing complete all as specified and directed. 300 Sqm
10 10 All as above but in vertical surfaces in skirting over and including of backing layer 10mm thick 1:3 complete all as specified and directed. 12 Sqm
11 11 M & L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade joint free complete all as speciied and directed. 50 Sqm
12 12 M& L for 15 to 20mm machine cut kota stone slab as in riser of steps, skirting, dado and pillar, cills and jambs laid over cement mortar backing coat jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with beewax polishand including over 15mm thick screed bed or bedding layer in CM1:4 complete all as specified and as directed by EIC 62 Sqm
13 13 Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. 957 Sqm
14 14 M& L for rendering 15mm thick in (1:6) CM on fair faces of brick work or concrete surfaces of walls and finishing even and smooth without using extra cement complete all as specified and directed. 250 Sqm
15 15 M& L for rendering 5mm thick in (1:3) cm on fair faces of ceiling and other RCC surface of any location and finishing even and smooth without using extra cement complete all as specified and directed. 200 Sqm
16 16 M& L for rendering 20mm thick in (1:4) cm (in two coats (15+5mm) with both coats mixed with liquid water proofing compound, surface finished even and fair without using extra cement (WPC will be measured separately). 300 Sqm
17 17 Supply only liquid water proofing compound. 10 ltr
18 18 Labour only for complete removal of existing treatment on walls including washing / rubbing down with water including necessary scaffoldings etc complete all as specified . 1550 Sqm
19 19 M&L for applying 2 coats of white cement based wall care putty on wall , new or old surfaces of any description finished even and smooth complete all as specified and directed. 1200 Sqm
20 20 M&L for applying 2 coats of white cement based wall care putty on Ceiling, new or old surfaces of any description finished even and smooth complete all as specified and directed. 500 Sqm
21 21 M&L for two coats of oil bound distemper on newly putty wall surfaces including necessary scaffoldings etc complete all as specified and directed. 1200 Sqm
22 22 M & L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper with roller over one coat of alkali resistant primer including chalk whiting complete all as specified and directed. 100 Sqm
23 23 M&L for two coats of oil bound distemper on newly putty ceiling surfaces including necessary scaffoldings etc complete all as specified 500 Sqm
24 24 M&L for preparation of old decorated surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and thereafter applying with roller one coat of oil bound distemper complete all as specified and directed. 350 Sqm
25 25 M & L for Preparation of new surfaces of ceiling and application of three coats of white washing complete all as specified and directed. 160 Sqm
26 26 M & L for application of one coat of white washing on old surface of ceiling. complete all as specified and directed. 10 Sqm
27 27 M&L preparation of New surfaces of wall and applying three coats of white wash complete all as specified and directed. 100 Sqm
28 28 M&L preparation of old surface of wall and applying one coat of white wash complete all as specified and directed. 295 Sqm
29 29 M&L for for preparation of new plastered surfaces of walls, chajjas, slab projections and applying two coats of 100% Anti fungal acrylic emulsion paint in approved shade over a coat of primer over new plastered surface including necessary scaffolding complete all as specified and directed. 100 Sqm
30 30 M&L for for preparation of old plastered surfaces of walls, chajjas, slab projections and applying two coats of 100% Anti fungal acrylic emulsion paint in approved shade over a coat of primer over old plastered surface including complete removal of old existing treatment and necessary scaffolding complete all as specified and directed. 1420 Sqm
31 31 Taking down chowkhats or frame with shutters (without taking off shutter from the frames) including grills etc where existing, exceeding 1.5 sqm but n exc 4 sqm complete all as specified and directed. 4 Each
32 32 Taking down Chowkats or frames with shutters (without taking off shutter from the frames not exceeding 1.5 Sqm each complete all as specified and directed. 38 Each
33 33 Taking down shutter of any description exc 1.00 but n exct 2.00 sqm each Sqm each complete all as specified and directed. 3 Each leaf
34 34 Taking down door / window shutter with grills of any description exc 1.00 but n exc 2.00 sqm each and refixing in the same opening after easing, adjusting & renewal of unserviceable screws etc complete all as specified and directed. 3 Each leaf
35 35 S&F extruded Powder coated aluminium section as in window, ventilation,door,particians (powder coated 50 micron in blackcolour) with movable, openable or fixed type shutter or any pattern as directed, aluminumsection medium weight of series B or size as directed by the Engr in charge cut to size , jointed toghter including rubber beading and all necessary fitting complete all as specfied and directed (Make: Jindal/Hindalco) Note :- (i) Only aluminum sections measured and paid in this item. (ii) Rate quoted by the contractor shall deemed to be inclusive of all neecssary fittings and fixture such as roller,handle,locks etc (iii) Glass pane and XPM jali measured and paid under supply only rate. 350 Kg
36 36 S & F aluminium grill conforming to DG- 102 of Deco Grill or equivalent , (10mm X 5.2mm) thick of approved design or equivalent as approved by Accepting Officer and fixing with and including 'F/U' channel not less than 1.5mm thick complete all as specified and directed. 37 Sqm
37 37 S&F aluminum anodised grill DG- 102 ( 10 mm x 7.5mm ) of Deco grill or equivalent fixed with 'F' section size not less than 20.60 x 15.20 x 1.5mm thick of approved make all as specified and directed. Note : (i) Make shall be of M/s Decogrille of M/s Associated Groups or equivalent as approved by the GE. (ii) Minimum thickness of anodizing shall be 15 microns. 4.5 Sqm
38 38 Supply only sheet glass 4.8 mm thick in glazing with rubber and aluminium beading/packing with rubber gasket complete all as specified and directed. 38 Sqm
39 39 S&F 4mm thick figured glass/pin headed type ordinary quality fixed in aluminium ventilator complete all as specified and directed. 1.25 Sqm
40 40 Supply only Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed. 32 Sqm
41 41 S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. 25.4 RM
42 42 S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and directed. 7.8 Sqm
43 43 S&F II nd class Hard Wood plain, solid straight chawkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed. 0.22 Cum
44 44 S&F MS flot iron as in hold fast size 25x6 mm as specified Gde Fe 410-0 or Fe 310-0. complete all as specified and directed. 2 Kg
45 45 M&L PCC Block for hold fast and similar work etc 1 : 2 : 4 type B-1(using 20mm graded stone aggregate) complete all as specified and directed. 0.1 cum
46 46 S&F plain framed pannelled shutters of 2nd class HW 35mm thick with panel of 12mm thick ply wood(BWR Quality) and styles as per IS 1003(part-I) complete all as specified and directed. 7.2 Sqm
47 47 S&F stainless steel butt hinges 100mm size. complete all as specified and directed. 36 Each
48 48 S& F 150mm length extruded aluminium alloy handles,fabricated type, anodised. complete all as specified and directed. 22 Each
49 49 S&F200 mm length aluminium anodised barrel tower bolt of extruded section. complete all as specified and directed. 16 Each
50 50 S&F150 mm length aluminium anodised barrel tower bolt of extruded section. complete all as specified and directed. 12 Each
51 51 M&L 300mm long Aluminium alloy, anodised, sliding door bolt with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section or cast aluminium alloy and fixed complete all as specified and directed.. 7 Each
52 52 S&F Push spring type stainless steel floor door stopper complete all as specified and directed. 8 Each
53 53 M&L painting with synthetic enamel paint of two coats over a coat of primer on new wooden surfaces of any description exc. 10 Cm width or girth including prepation of surfacescomplete all as specified and directed. 35 Sqm
54 54 M&L applying one coats of synthetic enamel paint on old wooden surfacesof any desccription exc. 10cm width or girth incl. preparation of surfaces.complete all as specified and directed. 124 Sqm
55 55 S&F Push Tap Urinal Valve Auto Closing System with built in control cock and wall flange fitted to 15mm bore pipe, complete all as specified and directed, 2 Each
56 56 S&F 32mm bore Low Density Polyethylene pipes (LDPE) of pressure rating 6Kg of /cm2 along walls, ceiling or floors etc, complete all as specified and as directed. 4 RM
57 57 S&F in repairs15mm bore pillar taps, cast copper alloy, with capstain heads, chromium plated fancy type screwed down, high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed 5 Each
58 58 S&F in repairs 15mm bore stop valves/angle cock fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for unions complete all as specified and directed 2 Each
59 59 S&F in repairs bib tap 15mm bore fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for unions complete all as specified and directed. 2 Each
60 60 Demoltion of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facing, precast concrete articles. 1 Cum
61 61 M&L for brick work with Sub class 'B' bricks straight or curved on plan exc 6m mean radius, built in cement mortar 1:6.complete all as specified and directed. 1 Cum
62 62 S& F for Vitreous China Urinal Half stall type white with all other accessories / fitting complete and fiex in repairs complete all as specified and directed. 2 Each
63 63 S & F WC connector 110 mm PVC SWR for WC complete all as specified and directed. 3 Each
64 64 Supply only PVC connector 15mm size with PTMT nuts of length 450mm 8 Each
65 65 S & f PVC valveless, syphonic action type, 10 ltrs cap flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe 32mm dia and fixed in repairs complete all as specified and directed. 5 Each
66 66 S & F Stainless steel floor trap, plain with grating removeable & refixable type including jointing with solvent cement 75mm dia of outlet complete all as specified and directed. 3 Each
67 67 S&F toilet paper holder brass chromium plated complete all as specified and directed (Make : Sona Cat No 1551 (Addson) or equivalent of make ESSCO) complete all as specified and directed. 2 Each
68 68 S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white with Plastic water closet seat, black, closed pattern withflat bottom, and cover and mild steel chromium plated or aluminised hinging device all as specified and directed. 4 Each
69 69 S & F Mirror 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood or PVC boardand fixed to wooden plughs with chromium plated brass screws and cup washers in repairs complete all as specified and directed. 4 Each
70 70 S&F in repair CP Tubular towel rail with hook 20 mm dia 600mm long between flanges of fixed with and including chromium plated brass screws and wooden/plastic screws. complete all as specified and directed. 4 Each
71 71 S&F stainless steel soap dishes approximate size 160mm x 160mm x90mm as complete as specified as directed 2 Each
72 72 S&F Glass Assembly sheet glass consisting of 5.5mm thick sheet glass 12cm wide with chromium plated bracked guard and railing 60cm long in repairs complete all as specified and directed.. 2 Each
73 73 S & FHat and coat hooks, solid body of aluminium, 175mm to 250mm long and fixed in repairs complete all as specified and directed. 2 Each
74 74 S & F Hangers 6 mm dia G I (upto 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fasterners 12.5 mm dia 40 mm long complete all as specified and directed. 180 SQm
75 75 S & F anodised aluminium snap grid frame work for false ceiling of grid size 605 x 605mm complete all as specified and directed. 180 SQm
76 76 Taking up or down steel tubing 15mm bore of pipe and connections including cleaning for refixing etc as required complete all as specified and directed.. 30 RM
77 77 All as per item above but 20mm bore of pipe complete all as specified and directed.. 5 RM
78 78 S & F tubes medium grade galvanised, with all fittings and fixed complete to walls or ceiling or laid in floors 15mm bore dia complete all as specified and directed. 30 RM
79 79 All as per item above but 20mm bore dia complete all as specified and directed. 5 RM
80 80 Cutting chases, pinning in brick wall, making good to facins where required and pointing in cement mortar 1 : 3 to ends of edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc, making good, cutting not exc 10cm girth complete all as specified and directed. 30 RM
81 81 S&F in repairs 15mm bore dia angle cock Chromium plated 15mm bore dia complete all as specified and directed. 6 Each
82 82 S & F Aluminium (extruded section) body door closer in repairs hydraulically regulated, designation No 3, universal type,suitable for door shuutters of 701 to 850 mm in width and of weight between 36 to 60 kg complete all as specified and directed. 2 Each
83 83 S & F in repair wash hand basin, vitreous china white of size 450x 300mm excluding taps, waste chain and plug and porcelain stopper but including brackets.complete all as specified and directed. 4 Each
84 84 Demolition of cement concrete unreinforced of any type any level and at any position and removal of the demolished material outside MD land complete all as specified and directed. 4.5 CUM
85 85 M&L 10mm thick plastering in CM 1:3, on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement complete all as specified and directed. 107 SQM
86 86 M&L 15mm thick plastering in CM 1:6, on fair faces of brick work or concrete surfaces and provn of 3mm thick wall care putty on plastered surfaces of wall; surfaces finished even and smooth with out using extra cement complete all as specified and directed. 100 Sqm
87 87 M & L for 20mm (15+5) thick rendering in Cm 1:4 using WPC @ 2% by weight of cement on brick work or concrete surfaces; surfaces finished even and smooth with out using extra cement complete all as specified Note : Water proofing compound shall be measured & paid seperately. 150 Sqm
88 88 Supply only integral water proofing compound. 26 Kg
89 89 S&F MAPLE WOOD-Maple wood is the hardest of hard woods and is the recommended wood for squash, basketball and badmintion courts. All major tournaments of these sports are played on a maple wood floor. Thickness for the overall system will be 72-75mm.\nMaple wood\n1. Pine wood sleepers -63mm wide x 32mm thick planks, chemically treated for termites at 18 inch centre to centre.\n2. Cushion Pads- 8mm thick cushion pads placed under the wooden sleepers for extra resilience.\n3. Plywood 12 mm thick.\n4. Flooring- Maple 20x57/67/82 mm. Tounge & Groove, klin dried and treated for termitites.\n5. The maple flooring will be finished with anti skid polyurethane finish. 67 Sqm
90 90 M&L for Epoxy paint over any type of surfaces with marking lines all as specified and directed. 107 Sqm
91 91 Removing & Re-Installing of toughened gall back wall system or squash court standard sized complete with all necessary fittings as specified and directed. 1 Each
92 92 M &L PCC 1:3:6 type C2 75mm thick as in plinth protection finished even and smooth using extra cement compete all as specified. 97 Sqm
93 93 S&F plain framed pannelled shutters of 2nd class HW 35mm thick with panel of 12mm thick ply wood(BWR Quality) and styles as per IS 1003(part-I) all as specified. ISI marked. 3.6 SQM
94 94 M&L Non asbestos fibre cement building boards 4mm thick fixed / inserted to GI frame work complete all as specified and directed. 180 Sqm
95 95 M&L for post construction anti- termite traetment along the external wall below concreate or masonary apron using chemical emulsion @2.25 liters per linear meter including drilling and plugging holes with cement morter 1:2 to match the existng floor etc complete all as specified and directed. 150 RM
96 96 M&L for post construction anti- termite of soil / concreate under existing floor along the floor and wall junction using chemical emulsion @ 1 liters per hole 300 mm apart including drilling and plugging 12 mm dia holes with cement morter 1:2 to match the existing floor etc complete all as specified and directed. 210 Sqm
97 97 M & L for post construction anti - termit treatment at points of contract of wood work using chemical emulision (in oil or kerosin based solution ) @ 0.5 liters per holy by drilling 6 mm dia holes at a down ward angles of 45 degree at 150 mm centere to center and sealing the same with white cement and making good to the existing surfaces etc complete all as specified and directed. 50 RM
98 98 S &F galvalume aluminium zinc coating corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed. 225 Sqm
99 99 M&L for rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates etc conforming to Fe 410-W (Gde-E-250) complete all as specified and directed 60 Kg
100 100 M & L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed. 23.5 Sqm
101 101 Excavation in trenches n.exc 1.5 m wide and n. exc 1.5 m in depth and getting out in soft/loose soil for removing/laying of cables complete all as specified and as directed by Engineer-in-charge. 54 Cum
102 102 Returning, filling including spreading , leveling , watering and well ramming in layers n.exc 25 cm complete all as specified and as directed by the Engineer-in- Charge. 48.5 Cum
103 103 Removing excavated material to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and as directed by Engineer-in-Charge. 5.5 Cum
104 104 Supply and laying HDPE pipes of pressure rating 6 Kg/Cm sq of size 32 mm laid in trenches complete all as specified and directed. 290 RM
105 105 Demolition of brick work built in CM incl. taking out roots vegetation if any at any position and removal to out side MD land 15 cum
106 106 M&L for brick work with sub class 'B' bricks straight or curved on plan exc. 6m mean radius built in CM(1:4) complete all as specified 15 cum
107 107 INTERNAL ELECTRIFICATION \nTaking down carefully copper/alumunium point wiring for light, fan, bell, socket or power complete including fittings such as switches, ceiling roses pendents regulators, sockets and tube light fittings etc, removing materials from site or for reuse refixing and making good distrubed surface of wall, floors etc all as specified and directed. 140 Point
108 108 Taking down main switches DBs with sheet metal enclosure 2/4/6/8 way SPN/TPN/DBs etc all as specified and directed. 4 Each
109 109 Taking down of existing ceiling fans, opening / dismantling of fan& fan blades, cleaning, servicing,oiling, greasing, carrying out repairs such as replacement of capacitors, bearings, bushes, canpoy, condensor, clamp, safety pin, rubber bush and reassembling the fan & fan blades,, connecting up, testing and re-fixing of the same ceiling fan of any sweep including provision of new cable from ceiling rose/ connector to fan and spray painting of ceiling fan with two coats of synthetic enamel paint after prepartion of surfaces,complete all as specified and directed 16 Each Job
110 110 Taking down of existing Exhaust fans, opening / dismantling of fan& fan blades, cleaning, servicing,oiling, greasing, carrying out repairs such as replacement of bearings, bushes and reassembling the fan & fan blades,and re-fixing of the same exhuast fan of any sweep including provision of new cable from ceiling rose/ connector to fan and spray painting of ceiling fan with two coats of synthetic enamel paint after prepartion of surfaces,complete all as specified and directed 5 Each Job
111 111 M & L for point wiring complete with proper colour coding using 1100 volts grade, 1.5 Sqmm, PVC insulated, FRLS,unsheathed wire with multi stranded copper conductor confirming to IS-694, Part II, ISI marked, drawn partly in and including PVC conduit concealed in walls etc including cutting chases and making good the same in CM 1:3 to match with existing surfaces and partly drawn in and including PVC casing caping fixed on the surfaces of RCC slab/ ceiling/columns/beams etc with all accessories, fittings, PVC junction boxes etc, including provision of modular metal flush boxed with modular cover plate and frame suitable for mounting modular switches , sockets, fan regulators etc, also inclduifng 1.5 Sqmm, PVC insulated, FRLS, unsheathed, 1100 Volts mutli-stranded copper conductor green colour as continous earth wire connected to common earth dolly all as specified and diretced for one light point/fan/bell point controlled by one one way switch, complete all as specified and directed 105 Point
112 112 all as per item No 111 above but for one 5 pin socket 5 Amps on same board complete all as specified and directed 17 Point
113 113 all as per item No111 above but for one 5 pin socket outlet 05 Amp independent board complete all as specified and directed 30 Point
114 114 all as per item No111 above but for 3 pin switch socket outlet 15 Amp independent with cable 2.5 sqmm unsheathed stranded 1100 Volts grade complete with 1.5 sqmm PVC insulated earth wire and connecting to earth dolly complete all as specified and directed. 2 Point
115 115 all as per item No 111 above but for one 3 pin switch socket 5 Amp single pole one way on same board with other switches including continuous 1.5sqmm PVC insulated copper conductor earth wire to common wire earth and connecting to earth dolly complete all as specified and directed. 4 Point
116 116 Material and labour for point wiring complete with 4 sqmm PVC insulated unsheathed 1100 volts grade FRLS cable stranded copper conductor single core in PVC casing caping of 20/25 mm complete with sunk iron pressed steel terminal box for fitting mounting switch/ sockets regulators etc with laminated sheet 3 mm thick cover and with 4 sqmm PVC insulated copper conductor earth wire and connected to earth dolly for one light point controlled by one switch all as specified and directed. 2 Point
117 117 M & L for point wiring complete with proper colour coding using 1100 volts grade, 1.5 Sqmm, PVC insulated, FRLS,unsheathed wire with multi stranded copper conductor confirming to IS-694, Part II, ISI marked, drawn partly in and including stobe enamelled steel conduit concealed in walls etc including cutting chases and making good the same in CM 1:3 to match with existing surfaces and partly drawn in and including stobe enamelled steel conduit fixed on the surfaces of RCC slab/ ceiling/columns/beams etc with all accessories, fittings, PVC junction boxes etc, including provision of modular metal flush boxed with modular cover plate and frame suitable for mounting modular switches , sockets, fan regulators etc, also inclduifng 1.5 Sqmm, PVC insulated, FRLS, unsheathed, 1100 Volts mutli-stranded copper conductor green colour as continous earth wire connected to common earth dolly all as specified and diretced for one light point/fan/bell point controlled by one one way switch, complete all as specified and directed 26 point
118 118 M & L for telephone wiring complete with 0.40 Sqmm nominal area PVC flexible telephone core solid copper conductor cable unsheated in and incld concealed non metalic rigid PVC conduit 20mm dia ISI marked incld fittings acceories and incld sunken MS terminal box suitable for mounting telephone shocket with 3mm thick Ms plastic sheet cover all as specified and directed. 10 Each
119 119 M & L for Telephone shocket 2 pin complete all as specified and directed. 10 Each
120 120 Supply & fixing ceiling rose , surface bakelite 3 terminal complete all as specified and directed. 65 Each
121 121 Supply & fixing modular fan regulator,120W- 2 module complete all as specified and directed. 16 Each
122 122 Supply & fixing switch modular type 6 Amp single pole one way 230V complete all as specified and directed. 99 Each
123 123 Supply & fixing switch modular type 16 Amp single pole one way 230V complete all as specified and directed. 4 Each
124 124 Supply & fixing socket modular type 6 Amp 2/3 pin single pole one way 230 Vcomplete all as specified and directed. 61 Each
125 125 Supply & fixing socket modular type 16 Amp 2/3 pin single pole one way 230 V complete all as specified and directed. 4 Each
126 126 Supply and fix in replacement of socket outlet multi purpose 5 pin 6 Amp modular type complete all as specified and directed. 4 Each
127 127 Supply & fixing Modular white cover plate with frame 18Module complete all as specified and directed. 2 Each
128 128 Supply & fixing Modular white cover plate with frame 12 Module complete all as specified and directed. 5 Each
129 129 Supply & fixing Modular white cover plate with frame 8 Modulecomplete all as specified and directed. 6 Each
130 130 Supply & fixing Modular white cover plate with frame 6 Modulecomplete all as specified and directed. 3 Each
131 131 Supply & fixing Modular white cover plate with frame 4 Modulecomplete all as specified and directed. 7 Each
132 132 Supply & fixing Modular white cover plate with frame 3 Modulecomplete all as specified and directed. 40 Each
133 133 Supply & fixing Modular white cover plate with frame 2 Module complete all as specified and directed. 3 Each
134 134 Supply & fixing modular Metal stainless steel made Flush box 12 Module complete all as specified and directed. 5 Each
135 135 Supply & fixing modular Metal s Flush box 18 Module complete all as specified and directed. 2 Each
136 136 Supply & fixing modular Metal Flush box 8 Module complete all as specified and directed. 6 Each
137 137 Supply & fixing modular Metal Flush box 6Module complete all as specified and directed. 3 Each
138 138 Supply & fixing modular Metal Flush box 4 Modulecomplete all as specified and directed. 7 Each
139 139 Supply & fixing modular Metal Flush box 3 Module complete all as specified and directed. 50 Each
140 140 Supply & fixing modular Metal Flush box 1/2 Module complete all as specified and directed. 3 Each
141 141 Supply & fixing motor starter for AC on off with modular white cover & Metal Flush box 3 Module complete all as specified and directed. 4 Each
142 142 Supply and fixing integrated sleek extruded LED channel with acrylic cover 20 watt with white light including with driver and prewired complete including 0.5 sqmm 3 core flexible wire connecting from ceiling rose complete all as specified and difected. 35 Each
143 143 S&F LED tube light fitting integral type 1x20W, 230V, connector block etc complete with all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and directed. 20 Each
144 144 Supply and fixing integrated sleek extruded LED channel with acrylic cover 9 watt with white light including with driver and prewired complete including 0.5 sqmm 3 core flexible wire connecting from ceiling rose complete all as specified and difected. 8 Each
145 145 Supply Fix high calss range of flame proof led twin tube light (2x20w)fitting of T8 with LM6 aluminium body having IP 65 protection with cool white glare suitable for fitted on ceiling complete all as specified and directed. 6 Each
146 146 Supply Fix high calss range of flame proof switches with HRC fuses unit SF/A/1011 having 16A double pole control ON/OFF switch made of Aluminium body having IP 65 protection suitable for control flame proof LED 2x20w Twin tube light fitting complete all as specified and directed. 6 Each
147 147 Supply and fixing surface mounting slim LED flat panel 2' x 2' with high efficient LEDs 45 watts and glare free opal difuser with aluminium body complete dismantling existing unserviceable square modular fittings all as specified and directed. 30 EACH
148 148 Supply & fix Heavy duty exhaust fan of 450 mm sweep, 230V complete with louvers, steel body, bolts, nuts, washers, suitably embedded in wall with provisioning of 23/0.0076 flexible three core wire for electrical connections from ceiling rose to fan all as specified and directed. 4 Each
149 149 Supply & fix wall mounted fan of 400 mm sweep,1400 RPM, 230V complete with suitably mounted on the wall with provisioning of 23/0.0076 flexible three core wire with 3 pin plug for electrical connections from 5A socket to fan all as specified and directed. 4 EACH
150 150 Taking down old unserviceable submain cable of any size and capacity and finishing wall surfaces. complete all as specified and directed. 50 RM
151 151 M&L in repairs for sub main wiring two run of size 4 sqmm PVC insulated electric power FRLS cable (heavy duty) 1100 volts grade with stranded copper conductor with 4.0 sqmm PVC insulated copper conductor earth wire in casing caping of suitable size (three run of 4 sqmm cable and one run of PVC conduit / casing caping will be measured as one unit) including dismantling of existing unserviceable submain wiring complete all as specified and directed. 50 RM
152 152 Supply and fix in repairs sheet metal enclosure powder painted MCCB DB TPN 415 Volts 4 way double door vertical type with 200 Amps rated bus bar din rail neutral link with suitable for MCCB as incomer and concealed in wall all as specified and directed, 2 Each
153 153 Supply & fix sheet metal enclosure powder coated for MCB DB SPN 8 way double door with din rail and bus bar including making good to the disurbed surface matching with the existing complete alla s specified and directed. 3 Each
154 154 Supply and fix MCCB 415 volts 36 KA three pole 100 Amps fixed type complete all as specified and directed. 1 Each
155 155 Supply and fix MCCB 415 volts 16 KA three pole 100 Amps fixed type complete all as specified and directed. 1 Each
156 156 Supply and fix MCB TP 63 Amps, 415 volts complete all as specified and directed. 3 Each
157 157 Supply and fix MCB TP 40 Amps, 415 volts complete all as specified and directed. 1 Each
158 158 Supply and fix MCB SPN 240 volts 63 Amps breaking capacity 10 KA 'C' Series rating complete all as specified and directed. 4 Each
159 159 Supply and fix MCB SPN 240 volts 40 Amps breaking capacity 10 KA 'C' Series rating complete all as specified and directed. 2 Each
160 160 Supply and fix MCB SPN 240 volts 6 to 32 Amps breaking capacity 10 KA 'C' Series rating complete all as specified and directed. 9 Each
161 161 Supply and fix MCB SP 240 volts 6 to 32 Amps breaking capacity 10 KA 'C' Series rating complete all as specified and directed. 30 Each
162 162 Material and labour for earthing complete with GI earth plate electrode 600x600x6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground lavel) with top edge of the plate not less than 1.5mtr below normal ground lavel connected to GI earth strip 32X6 mm by mean of bolts, nuts, check nuts and washer of brash all as shown in electrical plate No 3 connected to earthing test point all as specified or indicated including PCC pit and CI cover fullel with watering pipe, wire mess and copper lugs etc GI protection pipe 40 mm dia medium grade including testing on completion all as specified and directed. 2 Each
163 163 Supply, Lay, Test & Commissioning cable LT XLPE insulated and screened PVC bedded, galvanised steel strip or wire armoured electric power cable (heavy duty) with stranded aluminium conductor, 1100 Volts grade of Size 10 Sqmm, 2 core complete all as specified. 200 RM
164 164 Deduct Credit for Demolished/ Dismantled material Rs. (-) 45744.00.00 (Minus) as listed in Schedule of Credit Note: Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum'
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Copyright © 2021 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail