| 1 | 1 | Dismantling Asbestos cement (corrugated, semi corrugated, etc.,) sheets in roof covering complete all as specified and as directed. | | 685 | SQM |
|---|
| 2 | 2 | Dismantling framed timber scantlings 40sqcm and over in section, in any position complete all as specified and as directed. | | 1.5 | CUM |
|---|
| 3 | 3 | S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates including post etc. complete all as specified and as directed. | | 2900 | KG |
|---|
| 4 | 4 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.50 mm thick of any colour having tensile strength 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. | | 685 | SQM |
|---|
| 5 | 5 | S&F Pre-painted galvalume aluminium zinc coating GI based plain sheet 0.45mm to 0.50 mm thick of any colour having tensile strength 550 mpa as in ridges, fixed with self tapping screws complete all as specified and as directed. | | 19.5 | SQM |
|---|
| 6 | 6 | Demolition of wall and ceiling boards (fibre pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed. | | 165 | SQM |
|---|
| 7 | 7 | M&L False ceiling using GI snap grid system with roll-formed out of hot-dip galvanised steel capping (powder coated), main runner 38x24mm, cross Tee 29x24mm and wall angle 24x24mm and thickness not less than 1 mm, members suspended with Hangers 4 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, with 4mm thick designer ceiling board of any texture as approved by GE, complete all as specified and as directed. \nMake: Ecerest ceiling grid system \"REgular T-2430\" or techno commercially equivalent | | 165 | SQM |
|---|
| 8 | 8 | Demolition of brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. | | 4.5 | CUM |
|---|
| 9 | 9 | M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in CM 1:6 complete all as specified and directed. | | 52 | CUM |
|---|
| 10 | 10 | M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed. | | 4.83 | SQM |
|---|
| 11 | 11 | M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed. | | 10 | SQM |
|---|
| 12 | 12 | M&L 15mm thick rendering in CM 1:6 finished even and smooth without using extra cement on brick wall/ concrete surfaces complete all as specified and directed. | | 260 | SQM |
|---|
| 13 | 13 | M&L 15mm thick rendering in CM 1:4 finished even and smooth without using extra cement on brick wall/ concrete surfaces complete all as specified and directed. | | 270 | SQM |
|---|
| 14 | 14 | Taking down chowkats or frames not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed. | | 12 | EACH |
|---|
| 15 | 15 | Taking down chowkats or frames exceeding 1.5 Sqm and not exceeding 4sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed. | | 4 | EACH |
|---|
| 16 | 16 | Taking down shutters exceeding 1 Sqm and not exceeding 2 Sqm each and refixing on same opening after making necessary repair like planning etc. complete all as specified and as directed. | | 21 | PER LEAF |
|---|
| 17 | 17 | S&F Pressed steel frames of size 165x60 mm for doors with one or more rebates including necessary fixing lugs, lock strike plate etc., complete all as specified and directed. | | 15.5 | RM |
|---|
| 18 | 18 | S&F Pressed steel frames of size 125x60 mm for doors with one or more rebates including necessary fixing lugs ,lock strike plate etc , complete all as specified and as directed. | | 11.3 | RM |
|---|
| 19 | 19 | S&F 35 mm thick second class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and as directed. | | 11.03 | SQM |
|---|
| 20 | 20 | S&F 30 mm thick 2nd class Hard wood Glazed and skeleton shutters, open rebated prepared to receive glass/gauze etc. edges of framing, divided in to squres with plain chamfered or rounded, fitted with cut mitered beads for securing glass/gauze all as specified and directed including chiselling and planing of wooden existing frame to receive the shutter complete all as specified and as directed.\nNote: Glazing and gauze will be measured separately | | 5.57 | SQM |
|---|
| 21 | 21 | M&L for providing plain cement concrete 1:3:6, Type C0, using 12.50 mm graded stone aggregate as in filling hollow of pressed steel frame complete all as specified and directed. | | 0.2 | CUM |
|---|
| 22 | 22 | S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain color PVC sheet reinforced with MS Square tube, fixed in opening as per specification and drawing complete all as specified and directed. | | 43.05 | RM |
|---|
| 23 | 23 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame out of MS tube for top and bottom rails. MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width struck in side with solvent cement complete all as specified and directed. | | 10.28 | SQM |
|---|
| 24 | 24 | S&F 150mm size MS Butt hinges, medium weight, cold rolled, complete all as specified and directed. | | 27 | EACH |
|---|
| 25 | 25 | S&F 100mm size, MS Butt hinges, medium weight, cold rolled complete all as specified and directed. | | 27 | EACH |
|---|
| 26 | 26 | S&F 150 mm size aluminium anodized barrel tower bolt of extruded section .complete all as specified and directed. | | 30 | EACH |
|---|
| 27 | 27 | S&F 125 mm size aluminium anodized barrel tower bolt of extruded section complete all as specified and directed. | | 6 | EACH |
|---|
| 28 | 28 | S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and directed. | | 30 | EACH |
|---|
| 29 | 29 | S&F 100 mm size extruded aluminium alloy handles fabricated type, anodized complete all as specified and directed. | | 6 | EACH |
|---|
| 30 | 30 | S&F 300 mm long aluminium alloy, anodized sliding door bolt, with hasp and staple (bolt type) cast or extruded section and fixing bolts of extruded section complete all as specified and directed. | | 5 | EACH |
|---|
| 31 | 31 | S&F floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel pin fixed to door, over all length 140 mm complete all as specified and directed. | | 6 | EACH |
|---|
| 32 | 32 | S&F 300mm, Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. | | 1 | EACH |
|---|
| 33 | 33 | S&F in repairs 300mm, Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. | | 5 | EACH |
|---|
| 34 | 34 | S&F 3mm thick, Sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed. | | 11.75 | SQM |
|---|
| 35 | 35 | S&F in repairs 3 mm thick, ground or obscured or frosted on one side sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed. | | 27.7 | SQM |
|---|
| 36 | 36 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to steel / Wooden Joinery complete all as specified and directed. | | 11.75 | SQM |
|---|
| 37 | 37 | S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to steel / Wooden Joinery complete all as specified and as directed. | | 32 | SQM |
|---|
| 38 | 38 | S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. | | 12 | SQM |
|---|
| 39 | 39 | S&F Side hung shutters including projecting type hinges with steel handle complete with out glazing bars dovetailed or welded as fly proof shutters for steel windows of item No 26 as above all as specified and directed. | | 7.2 | SQM |
|---|
| 40 | 40 | S&F Steel ventilator with Box type frame and top hung shutter including hinges, steel peg, stay fixed including welding complete all as specified and directed. | | 2.25 | SQM |
|---|
| 41 | 41 | S&F in repairs Fancy type Steel PVC Coated, drapery rod of size 20-25mm dia, including fixing of Steel powder coated fancy brackets & end stops 2 Nos in Each opening etc complete all as specified and as directed. | | 51 | RM |
|---|
| 42 | 42 | S&F Anodised aluminium frame for partition with one or more rebates including 25mmx25mm beading, joining cleat for fixing etc. complete all as specified | | 170 | KG |
|---|
| 43 | 43 | M&L 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws complete all as specified and as directed. | | 50 | SQM |
|---|
| 44 | 44 | S&F 4mm thick plain sheet glass, ordinary quality n square exceeding 0.5 sqm in each pane and glazing with oil putty/fixed to aluminum frames icomplete all as specified and as directed. | | 8 | SQM |
|---|
| 45 | 45 | M&L 18 mm thick MDF board, Prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed. | | 25 | SQM |
|---|
| 46 | 46 | M&L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. | | 56 | KG |
|---|
| 47 | 47 | All as per item no 29 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed. | | 80.77 | KG |
|---|
| 48 | 48 | M&L Providing precast cement concrete in lintels in PCC 1:2:4, Type B1 using 20mm graded stone aggregate, set in CM 1:4 complete all as specified and as directed. | | 0.77 | CUM |
|---|
| 49 | 49 | Demolition of cement concrete in ground floors (including tiles /floor finishes) and pavings not exceeding 15 cm thickness (Below or above GL) complete all as specified and as directed. | | 3.1 | CUM |
|---|
| 50 | 50 | Dismantling of floor, hearth or wall tiling including cement mortar bedding complete all as specified and as directed. | | 100 | SQM |
|---|
| 51 | 51 | M&L Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. and brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed complete all as specified and directed. | | 55 | SQM |
|---|
| 52 | 52 | M&L 10 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified and directed. | | 55 | SQM |
|---|
| 53 | 53 | M&L Non skid white ceramic tiles 600x600x10mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floors etc. complete all as specified and as directed. | | 55 | SQM |
|---|
| 54 | 54 | M&L 75mm thick, PCC 1:3:6, type D2 using 40mm graded stone aggregate as in subbase complete all as specified and directed. | | 20 | SQM |
|---|
| 55 | 55 | M&L 50 mm thick PCC 1:3:6 type C2 (using 40 mm graded agg) as in plinth protection laid and finished in bays not exc 3 m c/c and filling the joints with mastic bitumen complete all as specified and as directed. | | 95 | SQM |
|---|
| 56 | 56 | M&L 75mm thick, PCC 1:4:8, type D2 using 40mm graded stone aggregate as in subbase complete all as specified and directed. | | 1.2 | SQM |
|---|
| 57 | 57 | M&L 25mm thick cement concrete 1:2:4, type B1 using 20mm graded stone aggregate as in sub floor, sub bases, floors and pavings etc complete all as specified. | | 77.2 | SQM |
|---|
| 58 | 58 | M&L 15 mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed. | | 39.2 | SQM |
|---|
| 59 | 59 | M&L for Non-skid white ceramic tiles 7 to 8mm thick, area of each tile exc 0.06 Sqm and n exc 0.11 Sqm in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and as directed. | | 39.2 | SQM |
|---|
| 60 | 60 | Taking down cement or cement lime plaster on brick/stone walls including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed. | | 47 | SQM |
|---|
| 61 | 61 | M&L 10mm thick backing coat/screed in CM 1:4 on fair faces of brick/ stone wall surfaces complete all as specified and directed. | | 158 | SQM |
|---|
| 62 | 62 | M&L vitrified ceramic tiles, 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match in skirting etc. complete all as specified and directed. | | 3 | SQM |
|---|
| 63 | 63 | M&L white glazed ceramic tiles, 300x200x6-7mm thick, set and jointed in neat cement slurry and pointed in coloured cement to match colour of the tile as in skirting/ dado complete all as specified and directed. | | 5.55 | SQM |
|---|
| 64 | 64 | M&L for white glazed ceramic tiles (300x250)x 8-10mm thick, as in skirting/ dado set and jointed in neat cement slurry and pointed in coloured cement to match colour of the tile complete all as specified and as directed. | | 100 | SQM |
|---|
| 65 | 65 | M&L Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. | | 30 | SQM |
|---|
| 66 | 66 | M&L 50mm thick Sand filling under floors including watering and consolidation complete all as specified and as directed. | | 10 | SQM |
|---|
| 67 | 67 | M&L 60mm thick rubber moulded machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming to IS 15658 - 2006 of M-40 Grade complete all as specified and as directed. | | 20 | SQM |
|---|
| 68 | 68 | S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including fixing of flushing cistern complete all as specified and directed. | | 1 | EACH |
|---|
| 69 | 69 | S&F Vitreous China squatting pan, ‘Orissa’pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) , P trap/S trap etc complete all as specified and as directed. | | 5 | EACH |
|---|
| 70 | 70 | Supply only PVC low level flushing cistern of 10 litre capacity, syphonic action type, white, with inlet, ball valve, float and handle including fixing brackets complete all as specified and directed. | | 3 | EACH |
|---|
| 71 | 71 | S&F in repairs PVC low level flushing cistern of 10 litre capacity, syphonic action type, white, with inlet, ball valve, float and handle including fixing brackets complete all as specified and directed. | | 3 | EACH |
|---|
| 72 | 72 | S&F Vitreous China bowl urinal flat back, white, size 465 x 355 x 265 mm (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed. | | 2 | EACH |
|---|
| 73 | 73 | S&F Vitreous china wash basin, white, flat back, size 550 x 400mm including fixing brackets complete all as specified and directed. | | 5 | EACH |
|---|
| 74 | 74 | S&F Pillar taps, fancy type, (half turn type), cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of 15mm bore complete all as specified and directed. | | 2 | EACH |
|---|
| 75 | 75 | S&F in repairs Pillar taps, fancy type, (half turn type), cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of 15mm bore complete all as specified and directed. | | 3 | EACH |
|---|
| 76 | 76 | S&F two in one combination of bib tap, cast copper alloy, chromium plated, fancy type, screwed down, screwed for iron pipe or for brass ferrule of 15mm bore, complete all as specified and directed. | | 1 | EACH |
|---|
| 77 | 77 | S&F health faucet, jet spray, CP, 15mm dia with flexible pipe and fixing nut etc., complete all as specified and directed. | | 1 | EACH |
|---|
| 78 | 78 | S&F PVC connections, 450mm long, PTMT nuts fixed to 15mm bore pipe complete all as specified and directed. | | 5 | EACH |
|---|
| 79 | 79 | S&F in repairs PVC connections, 450mm long, PTMT nuts fixed to 15mm bore pipe complete all as specified and directed. | | 6 | EACH |
|---|
| 80 | 80 | S&F Angle stop valve 15mm bore, high pressure, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, complete complete all as specified and directed. | | 5 | EACH |
|---|
| 81 | 81 | S&F in repairs Angle stop valve 15mm bore, high pressure, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, complete complete all as specified and directed. | | 6 | EACH |
|---|
| 82 | 82 | S&F bib tap, fancy type, chromium plated, screwed down, screwed for iron pipe or ferrule of 15mm bore, complete complete all as specified and directed. | | 2 | EACH |
|---|
| 83 | 83 | S&F in repairs bib tap, cast copper alloy, fancy type chromium plated, screwed down, screwed for iron pipe or ferrule of 15mm bore complete all as specified and as directed. | | 12 | EACH |
|---|
| 84 | 84 | S&Fin repairs brass chromium plated shower rose 100 to 125 mm size, swial type with arm, fixing with 15mm bore pipe complete all as specified and as directed. | | 3 | EACH |
|---|
| 85 | 85 | S&F in repairs 20mm bore Gunmetal, globe or gate valves (half turn type or wheel type), screwed both ends for iron pipe complete all as specified and as directed. | | 6 | EACH |
|---|
| 86 | 86 | S&F 600 x 450mm bevelled edge mirror of selected quality glass 5.0/ 5.5mm thick mounted on standard PVC/Aluminum frame complete all as specified and directed. | | 5 | EACH |
|---|
| 87 | 87 | S&F in repairs 600 x 450mm bevelled edge mirror of selected quality glass 5.0/ 5.5mm thick mounted on standard PVC/Aluminum frame complete all as specified and directed. | | 2 | EACH |
|---|
| 88 | 88 | S&F Tubular towel rail 20mm dia, brass chromium plated fancy type complete all as specified and directed. | | 3 | EACH |
|---|
| 89 | 89 | Taking down existing drain/soil/waste/vent pipes of any description and in any position of any size complete all as specified and as directed. | | 36 | RM |
|---|
| 90 | 90 | S&F 110mm dia, PVC (SWR) pipes single socketed, in any length, laid in trenches, in floors or fixed to walls complete all as specified and as directed. | | 20 | RM |
|---|
| 91 | 91 | S&F 110mm dia, PVC (SWR) bends any radius, fitted with oval access door complete all as specified and as directed. | | 4 | EACH |
|---|
| 92 | 92 | S&F 110mm dia, PVC (SWR) bends any radius, complete all as specified and as directed. | | 4 | EACH |
|---|
| 93 | 93 | S&F 110mm dia, PVC (SWR) junction, single (single T) equal or unequal with door access complete all as specified and as directed. | | 3 | EACH |
|---|
| 94 | 94 | S&F 75mm dia, PVC (SWR) pipes single socketed, in any length, fixed to walls/ laid in floors complete all as specified and as directed. | | 10 | RM |
|---|
| 95 | 95 | S&F 75mm dia, PVC (SWR) bends any radius with oval access door all as specified and directed. | | 4 | EACH |
|---|
| 96 | 96 | S&F 40mm bore PVC (SWR) pipes single socketed, in any length, fixed to walls/ laid in floors complete all as specified and as directed. | | 16 | RM |
|---|
| 97 | 97 | S&F PVC floor trap 75mm outer dia with grating including jointing with solvent cement complete all as specified and as directed. | | 9 | EACH |
|---|
| 98 | 98 | M&L PVC (SWR) gully traps 125 x 110 mm, setting and jointing with solvent cement complete all as specified and as directed. | | 3 | EACH |
|---|
| 99 | 99 | S&F Cast iron nahani trap, 50mm dia with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as specified and directed. | | 6 | EACH |
|---|
| 100 | 100 | Taking down Steel/ PVC tubing and connection including cleaning etc dia up to 15 mm complete all as specified and as directed. | | 100 | RM |
|---|
| 101 | 101 | Refixing of 15 mm bore old steel tubing and connections in new or old position with all fittings to roof, wall or ceiling complete all as specified and as directed.\n\n | | 20 | RM |
|---|
| 102 | 102 | S&F 15mm Unplasticised PVC pipes of pressure rating 10 kgf/cm2 laid and fixed to walls and ceilings or laid in floors complete all as specified and directed. | | 90 | RM |
|---|
| 103 | 103 | Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and getting out in hard/dense soil. complete all as specified and as directed. | | 10 | CUM |
|---|
| 104 | 104 | M&L PCC 1:4:8, type D2, using 40mm graded stone aggregate as in foundations filling and mass concrete complete all as specified and as directed. | | 2.25 | CUM |
|---|
| 105 | 105 | Returning, filling in , including spreading, watering and well ramming in layers not exceeding 25 cm thick using soils complete all as specified and as directed. | | 3.5 | CUM |
|---|
| 106 | 106 | Removing excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point as in soils complete all as specified and as directed. | | 6.5 | CUM |
|---|
| 107 | 107 | M&L Preparation of surafces and applying two coats of colour wash over a coat of whitewash on newly plastered surfaces complete all as specified and as directed. | | 490 | SQM |
|---|
| 108 | 108 | M&L Preparation of surafces and applying three coats of whitewash on newly plastered wall surfaces complete all as specified and as directed. | | 260 | SQM |
|---|
| 109 | 109 | M&L for preparation of old wall surfaces and applying one coat of oil bound distemper complete all as specified and as directed. | | 380 | SQM |
|---|
| 110 | 110 | M&L for preparing surfaces of wall and applying two coats of oil bound distemper over a coat wall care putty and a coat of primer on newly plastered wall surface complete all as specified and as directed. | | 50 | SQM |
|---|
| 111 | 111 | M&L Preparation of new wood surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. complete all as specified and as directed. | | 20 | SQM |
|---|
| 112 | 112 | M&L Preparation of old wood surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint including filling of groves of size not exc 1 Sq cm and any numbers of line with putty and rubbing to make a smooth surface complete all as specified and as directed. | | 95 | SQM |
|---|
| 113 | 113 | M&L Preparation of new steel surfaces over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. | | 178.75 | SQM |
|---|
| 114 | 114 | M&L Preparation of old steel surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. | | 120 | SQM |
|---|
| 115 | 115 | S&F in repairs Sinks with drainage board made of stainless steel l.0 mm thick sheet, overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm (kitchen or laboratory) with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe complete all as specified and as directed. | | 3 | EACH |
|---|
| 116 | 116 | S&F Stainless steel plate rack of 1mm thick approved quality of size not less than 36 x 36 inches and weight not less than 7.00 kgs each including plugs, washers and fixed to walls complete all as specified and as directed. | | 3 | EACH |
|---|
| 117 | 117 | Dismantling water tanks of capacity exceeding 250ltrs but not exceeding 500ltrs and removing to store complete all as specified and as directed. | | 3 | EACH |
|---|
| 118 | 118 | S&F Rotational moulded polyethylene water storage tanks 500 Lit capacity (cylindrical vertical with closed top) including brass type flot valve hoisted and fixed in position all as specified in SSR Part I. complete all as specified and as directed. | | 3 | EACH |
|---|
| 119 | 119 | Taking down carefully point wiring (light, fan, socket or power) complete including fittings and fixtures such as switches, ceiling rose, pendents, regulators sockets, lamp holder, light fittings etc and making good the disturbed surface complete all as specified and as directed. | | 90 | Point |
|---|
| 120 | 120 | M&L Point wiring using with multistranded copper conductor 1.5 sqmm nominal cross-sectional area single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No. in and including PVC conduit pipe and accessories fixed on wall/roof/floor etc, with mild steel/pressed steel sunken box (with earth dolly) duly painted with two coats of anti corrosive paint/aiuminium paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, socket and fan regulators etc, including PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth duly comple all as specified and directed by Engr-in-charge for the following :- | | | |
|---|
| 121 | 120.1 | One light point controlled by one switch 5 amps complete all as specified and as directed. | | 30 | Point |
|---|
| 122 | 120.2 | One fan point controlled by one switch 5 amps and regulator complete all as specified and as directed. | | 10 | Point |
|---|
| 123 | 120.3 | One socket outlet 3 pin 5 amps on independent board complete all as specified and as directed. | | 26 | Point |
|---|
| 124 | 121 | All as per item No 128 hereinbefore but 4 Sqmm, PVC insulated and unsheathed copper multi stranded conductor cable and 4 Sqmm multi stranded copper conductor for earth wire for 3 pin, 15 Amps power points complete all as specified and as directed. | | 24 | Point |
|---|
| 125 | 122 | S&F switch piano, flush button, single pole, one way,. 5 amps, 240 volts as per existing type and model including electrically connecting up complete all as specified and directed. | | 40 | EACH |
|---|
| 126 | 123 | S&F Socket outlet 2 in 1, 3 pin 5 Amps, 240 volts as per existing type and model including electrically connecting up complete all as specified and directed. | | 26 | EACH |
|---|
| 127 | 124 | S&F socket outlet 2 in 1, 3 pin, 5 Amps and 15 Amps flush type, 240 volts existing type and model including electrically connecting up complete all as specified and directed. | | 24 | EACH |
|---|
| 128 | 125 | S&F Decorative ultra slim round profile LED lighting fixture 20 W LED 6500 K with extruded polycarbonate, environmental friendly, energy efficient ready to use pack. and PVC two core copper conductor cable from ceiling rose to fittings complete all as specified and directed.\nMake: Cat part No. LHEXAQP7PN1W020 of make Havells or techno commercially equivalent. | | 27 | EACH |
|---|
| 129 | 126 | S&F Decorative ultra slim square profile LED lighting fixture, 10 W, LED 6500 K with extruded polycarbonate, environmental friendly, energy efficient ready to use pack and PVC two core copper conductor cable from ceiling rose to fittings complete all as specified and directed.\nMake:- Cat part No. LHEXACP7IN1W010 of make Havells or techno commercially equivalent. | | 3 | EACH |
|---|
| 130 | 127 | S&F Step type electronic fan regular flush type including electrically connecting up complete all as specified and directed. | | 10 | EACH |
|---|
| 131 | 128 | S&F Exhaust fan, PVC body with automatic back shutter louvers 300 mm sweep, 1400 RPM or more, single phase, 240 Volts, AC, 50 Hz and connecting up complete including louvers and provision of cable 3/2 core of suitable size from ceiling rose to fan in flexible hose and PVC connector block complete all as specified and as directed. | | 4 | EACH |
|---|
| 132 | 129 | S&F Replacement MCB DB, SPN, 4 way suitable for single phase, 240 volts with 200 Amps rated bus bar, double door type suitable for mounting incoming and outgoing MCB's single/double pole, including electrically connecting up, dismantling of old existing DB and making good disturbed surface etc complete all as specified and directed. | | 4 | EACH |
|---|
| 133 | 130 | S & F MCB SPN 32 amps including electrically connecting up using wiring lugs complete all as specified and as directed.\nMake cat no. DHMGCSNF006-032 of Havells or techno commercially equivalent | | 4 | EACH |
|---|
| 134 | 131 | S&F MCB, SP, 6 to 32 amps,including electrically connecting up using wiring lugs complete all as specified and as directed.\nMake cat no. DHMGBSPF006-032 of Havells or techno commercially equivalent | | 9 | EACH |
|---|
| 135 | 132 | Taking down sub main wiring of any size in any type complete all as specified and as directed. | | 60 | RM |
|---|
| 136 | 133 | M&L Sub main wiring complete with two runs of 4.0 sqmm single core unsheathed PVC insulated copper conductor cable, 1100v grade along with 2.5 Sqmm single core cable for earth continuity through PVC conduit pipe including taking down old unserviceable sub main wiring of any size and length all as specified and directed by Engr-in-Charge. \nNote: Two runs of 4.0 Sqmm cable, one run of 2.5 sqmm earth cable and one run of PVC conduit shall be measured as one unit length. | | 60 | RM |
|---|
| 137 | 134 | M&L Earthling complete with GI earth plate electrode 60x60cmx6mm thick buried directly in ground earth pit not less than 2.25m deep below ground level with top edge of the plate not less than 1.5m below normal ground level connected to GI earth wire 4mm dia by means of bolts and nuts washers made out of GI and earth wire protected by Galvanized pipe light grade 15mm bore, 20 mm bore medium grade and connected to main control board all as shown in Electrical plate No 5 of SSR part I including necessary earth work and excavations in any type of soil, PCC 1:2:4 type B1 chamber with 40mm thick, RCC 1:2:4 cover slab with 6mm dia MS bars etc. complete all as specified and as directed. Note :- Rate quoted shall deem to include for GI earth wire and GI protection pipe lead upto 7.5m length. | | 4 | EACH |
|---|
