Construction Of Auditorium And Stadium At Cts , Musabani In The District Of East Singhbhum . , Cts, Musabani-Jharkhand

TDR : 28006830

Tender Notice
BOQ

Expired

Cts, Musabani , Jharkhand

Tender Brief : Construction Of Auditorium And Stadium At Cts , Musabani In The District Of East Singhbhum .

Document Fees
₹ 10000 /-

EMD
₹ 956000.0 /-

Tender Value
₹ 9.55 Crore /-

Submission Date
14-06-2021

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Name of Work: Construction of Auditorium and Stadium at CTS, Musabani in the district of East Singhbhum
1	1	Building work	1
2	2	\nEARTH WORK IN EXCAVATION IN FOUNDATION Trenches in ordinary soil (vide classification of soil item -A) and disposal of excavated earth as obtained to a distance upto 50 M including all lift, leveling ramming the foundation trenches, removing roots of tree shrubs all complete as per approved design, building specification and direction of E/I.	2	2509.24	Cum.
3	3	\nEARTH FILLING IN FOUNDATION TRENCHES AND PLINTH in layers not exceeding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation foundation trenches within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I. (mode of measurement compacted volume)	3	2509.24	Cum.
4	4	\nFILLING IN FOUNDATION TRENCHES AND PLINTH in layers not exceeding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained after cutting within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I. (mode of measurement compacted volume)	4	154.81	Cum.
5	5	\nProviding coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume)	5	834.36	cum
6	6	\nProviding designation 75 A one brick flat soling joints files with local sand including cost of watering taxes royalty all complete as per building specefication and direction of E/I	6	5338.46	Sqm
7	7	\nProviding P.C.C. M-10 with nominal mix of (1:3:6) in Foundation with approved quality of stone metal grade III (53 to 22.4 mm size) and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixture, placing in position, vibration, striking, curing, taxes and royalty all complete as per building specification & direction of E/I.	7	515.67	cum
8	8	\nProviding R.C.C. M-20 with nominal mix of (1:1.5:3) in FOUNDATION and plinth with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer, placing in position vibrating striking curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/I.	8	241.02	Cum.
9	9	\nProviding R.C.C. M-20 with nominal mix of 1:1.5:3 in COLUMN with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening shuttering, mixing cement concrete in mixer, placing in position vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of Engineer Incharge.	9	187.77	Cum.
10	10	\nProviding R.C.C. M-20 with nominal mix of 1:1.5:3 in BEAM with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening shuttering, mixing cement concrete in mixer, placing in position vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of Engineer Incharge.	10	219.94	Cum.
11	11	\nProviding R.C.C. M-20 with nominal mix of 1:1.5:3 in BEAM with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening shuttering, mixing cement concrete in mixer, placing in position vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of Engineer Incharge.	11	73.82	Cum.
12	12	\nProviding R.C.C. M-20 with normal mix of 1:1.5:3 in ROOF SLAB with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening shuttering, mixing cement concrete in mixer, placing in position vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/I.	12	177.26	Cum.
13	13	\nProviding R.C.C.M 200 (1: 1.5: 3) in Band at Lintel level with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I	13	6.11	Cum.
14	14	\nProviding R.C.C. M-20 with nominal mix of 1:1.5:3 in LINTEL with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening shuttering, mixing cement concrete in mixer, placing in position vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all comple as per building specificationand direction of E/I.	14	7.94	Cum.
15	15	\nProviding R.C.C M-200 with nominal mix(1:1.5:3) in stair case with approved quality of stone chips 20 mm to 6 mm size graded and clean course sand of FM 2.5 to 3 including screening, shuttering, mixing cement concrete in concrete mixer and placing in position , vibrating, striking, curing (but excluding the cost of reinforcement)royalty and taxes all complete job as per building specification and direction of E/I.	15	20.46	Cum.
16	16	\nProviding 63 mm thick R.C.C. M-20 with nominal mix of 1:1.5:3 in CHAJJA with approved quality of stone chips 20 mm to 6 mm size graded 20 mm to 10 mm, 10 mm to 6 mm stone chips by volume(2:1) and clean coarse sand of F.M. 2.5 to 3 including making drip course mix in concrete in mixer, placing in position screening, vibrating, striking, and providing 6 mm cement plaster (1:4) in ceiling and sides of Chajja with making drip course curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of Engineer Incharge.	16	2.746	Cum.
17	17	\nProviding 35 mm thick precast R.C.C. M- 20 with nominal mix of (1:1.5:3) shelves with approved quality of stone chips 12mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 with 1.5 mm cement punning at top and side and 6mm cement plaster (1:4) at bottom including screening , curing and placing the slab in position(but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/I.	17	1.156	Cum.
18	18	\nProviding designation 75A brick work in CM (1:6) in Foundation and plinth with approved quality of clean coarse & of F.M. 2.5 including providing 10mm thick mortar joints cost of screening, racking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I.	18	925.75	cum
19	19	\nProviding and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size)	19	153.64	sqm
20	20	\nProviding designation 75 A BRICK WORK in CM. (1:6) in SUPERSTRUCTURE with approved quality of clean coarse & of F.M. 2.5 including providing 10mm thick mortar joints cost of screening,racking out joints to 15 mm depth,curing, taxes and royalty all complete as per building specification and direction of Engineer Incharge	20	447.928	cum
21	21	\nProviding Designation 100A B/W with Fly Ash Lime Brick (FALB) conforming to IS 12894-1990 (9\"x4.5\"x3\") in cement mortar (1:3) in Superstructure with clean coarse sand of F.M. 2 to 2.5 including 10mm thick mortar joints,cost of screening, raking out joints to 15 mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.	21	35.322	cum
22	22	\nProviding 125 mm thick REINFORCED DESIGNATION 75 A BRICK WORK in C.M. (1:4) in SUPERSTRUCTURE with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening, cost of materials, racking out joints to 15 mm depth, carriage, taxes and royalty (but excluding the cost of reinforcement) all complete as per building specification and direction of Engineer Incharge .	22	423.06	sqm
23	23	\nExtra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.	23	423.06	sqm
24	24	\nProviding 12 mm Thk. cement plaster(1:6) on inside walls with clean course sand of FM-1.5 including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all complete as per building specification and direction of E/I	24	2728.12	sqm
25	25	\nProviding 6mm cement plaster(1:4) in ceiling with clean course sand of FM-1.5 including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all complete as per building specification and direction of E/I	25	1341.65	Sqm
26	26	\nProviding 12 mm thick water proof CEMENT PLASTER (1:6)on outside wall with clean coarse sand of F.M.1.5 and 5% cico including cost of screening, curing making grooves with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I. (Cost of cico will be paid separately)	26	5310.69	Sqm
27	27	\nExtra for providing and mixing waterproofing material in cement plaster work in proportion recommended by the manufacturers.	27	199.88	Per Bag of Cement used in the Mix
28	28	\nProviding & laying 15 mm to 23 mm thick KOTAH STONE SLAB FLOORING and skirting of approved size, texture and colour over 19 mm thick base of line mortar (1:1:1) Lime putty: Surkhi: Coarse sand) laid over and jointed with grey cement slurry mixed with pigment ot match the shade of slab including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/I.	28	1461.41	SQM
29	29	\nProviding & laying 15 mm to 23 mm thick KOTAH STONE tiles in risers of steps , skirting and pillars of approved size, texture and colour over 19 mm thick base of line mortar (1:1:1) Lime putty: Surkhi: Coarse sand) laid over and jointed with grey cement slurry mixed with pigment ot match the shade of slab including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/I.	29	431.11	SQ.M
30	30	\nExtra for pre finished nosing to treads of steps of Kota stone/ sand stone slab	30	1528.57	M
31	31	\nChequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).\n11.20.3 Dark shade pigment using ordinary cement	31	1314.11	SQ.M
32	32	\nProviding 12mm cement plaster(1:3) with clean course sand of F.M 1.5 with floating coat of neat cement in skirting including rounding of junctions with floor, curing taxes and royalty all complete as per building specification and direction of E/I.	32	20.59	Cum.
33	33	\nSupplying, fitting & fixing local made COLLAPSIBLE GATE of approved size and make properly fabricated with vertical double channel 20 x 10 x 2 mm at 100 mm center and braced with M.S. flat diagonals 20 x 3 mm with top and bottom rail of T. iron 40 x 40 x 6 mm with 38 dia steel pulleys complete with bolt, buts locking arrangement, steppers, handles including applying a primer coat of red lead paint carriage, hoisting and taxes etc. all complete as per building specification and direction of Engineer Incharge.	33	7.43	SQ. M
34	34	\nProviding and fixing wooden moulded beading to door frames with iron screws, plugs and priming coat on unexposed surface etc. complete. \n50X20 MM	34	73.98	R. M.
35	35	\nProviding and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :\n9.100.1 125 mm	35	2	EACH
36	36	\nProviding and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.	36	2.47	SQ.M.
37	37	\nSupplying, fitting & fixing 35 mm th. Solid core type non-decorative single leaf FLUSH DOOR SHUTTERS in doors with block board core blended with high quality phenol formal dehydes synthetic resinboth side commercial veneered of standard make with oxidised iron fittings such as hinges, tower bolts , handle,cleats aldrop, door stopper & sand blocks & taxes all complete as per detail drawing building specification & direction of the E/I.	37	30.79	SQ. M
38	38	\nProviding tor steel reinforcement TMT FE 500 of following dia. rods as per approved design and drawing including carriage of bars to work site, cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction and direction of E/I. \n(ONLY VALID FOR SAIL & TATA STEEL, JSPL, ELECTRO STEEL LTD. AND VIZAG STEEL)	38
39	39	(a) 8 mm to 25 mm(TMT coil Fe 500) (Onaly valid for SAIL, TATA Stee, JSPL, Electro Steel Ltd and Vizal Steel)	39	109.51	MT
40	40	\nProviding & fixing FAN HOOK of 16 mm dia M.S. bar, 1 M long bent to required size and shape, placed in position and fluid in the R.C.C. slab-beam at the time of casting all complete as per building specification and direction of E/I. (where material is no	40	24	Each
41	41	\nSupplying, fitting & fixing 250 x 20 x 6 mm L-type M.S. clamp properly fishtailed including making holes and setting the same in 375 x 125 x 75 mm cement concrete block (1:2:4) with cost of all layout and materials and taxes as per building specification and direction of E/I.	41	258	Each
42	42	\nMaking 20x6 mm grooves in plaster surface over walls trully horizontal or vertical as specified at regular intervals at all heights including cleaning finishing , scaffolding and curing with all leads and lifts of water all complete as per buildinng specification and direction of E/I.	42	450.19	Mtr
43	43	\nProviding and laying DOUBLE CHARGE VITRIFIED FLOOR TILES in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08% and confirming to IS : 15622/ ISO 13006, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.30 kg per sqm including grouting the joints with white cement and matching pigments etc. complete.	43	1292.68	Sqm
44	44	\nProviding and fixinging 20 mm thick mirror polished, machine cut for kitchen platform and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base of cement mortar 1:4 (1cement :4 coarse sand) laid and jointed with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels.	44	464.37	Sqm
45	45	\nExtra for providing edge moulding to Granite stone counters, vanities etc. over above including machine polishing to edge to give high gloss finish etc. complete as per design approved by Architects / E/I.	45	416.81	Rmt
46	46	\nMarble stone flooring with 18 mm th marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm thick base of cement mortar 1:4 (1cement :4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with:	46
47	47	Udaipur Green Marble\n	47	73.33	Sqm
48	48	\nExtra for pre finished nosing to treads of steps of marble stone	48	404.04	Mtr
49	49	\nExtra for marble stone flooring in treads of steps and risers using single length upto 2.00 m	49	73.33	Sqm
50	50	\nProviding and laying 6 mm precast SEMI GLAZED CERAMIC TILES of approved quality in DADO over 12mm cement mortar (1:3) and jointed with white cement slurry flush pointed with white cement including rubbing, polishing and cost of curing taxes, and royalty all complete as per building specification and direction of E/I with grade A coloured 15cmx15cm tiles.	50	475.53	Sqm
51	51	\nProviding 25mm thick first class patent flooring ( 1:2:4 ) with stone chips in two layers bottom layer 19 mm thick (1:2:4) with 12 mm to 6mm size graded stone chips and top layer 6mm thick (1:2) with 6mm down stone chips, in panels, including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royalty all complete as per building specification and direction of E/I.	51	215.29	Sqm
52	52	\nProviding 12mm cement plaster(1:3) with clean course sand of F.M 1.5 with floating coat of neat cement in skirting including rounding of junctions with floor, curing taxes and royalty all complete as per building specification and direction of E/I.	52	12.03	Sqm
53	53	\nProviding and fixing stone slab table rubbed, edges rounded and polished of size 75x50 cm deep and1.8 cm thick fixed in Urinal Partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1cement :2 coarse sand : 4 stone chips)as per direction of E/I and finished smooth.	53	3.64	Sqm
54	54	\nProviding and laying VITRIFIED PARKING/ INDUSTRIAL TILES in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08% and confirming to IS : 4457:2007 of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.30 kg per sqm including grouting the joints with white cement and matching pigments etc. complete.	54	178.04	Sqm
55	55	\nStone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : Red sand stone-exposed face fine dressed with rough backing.40 mm thick	55	430.87	Sqm
56	56	\nsuppling , fitting and fixing good quality well dressed and well seasoned sal wood work in chaukhat in doors window ,sky light, fanlight and celevitial window opening including wedge over clmps all including application of two coats of wood preservative of approved quality on the surface , building walls and lintel all complete as per building specification and direction of El.	56	2.11	cum
57	57	\nProviding and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: (Approved Brand - Green club/ Green Optima/ Century/ Duro).35 mm thick including ISI marked Stainless steel hinges with necessary screws.	57	68.68	Sqm
58	58	\nProviding and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-incharge (Frame work shall be paid for separately). 12mm thick commercial ply conforming to IS : 1328 BWR type	58	75.63	Sqm
59	59	\nProviding & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick	59	212.98	Sqm
60	60	\nProviding and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i. e. at top, bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :	60
61	61	\nFor shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)	61
62	62	\nPowder coated aluminium (minimum thickness of powder coating 50 micron) WT. OF AL. SECTION FOR 3 TRACK WINDOW - @ 0.75 KG PER S.FT.	62	1155.5	kg
63	63	\nProviding and fixing glazing in aluminium window, ventilator shutters etc. with EPDM / Neoprene gasket etc complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item):	63	26.17	sqm
64	64	\nProviding and fixing glazing in aluminium door, shutters etc. with PVC/neoprene gasket etc complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.0 mm thickness	64	11.13	sqm
65	65	\nProviding and fixing Double action hydraulic floor spring of approved brand and manufacture I.S.:6315 marked, Hardwyn Make (Model 3000) or equivalent for doors including cost of cutting floors as required, embedding in floors & cover plates with brass pivot and single piece M.S. sheet outer box with side plate etc.complete as per the direction of E/I. WITH STAINLESS STEEL COVER PLATE:- DOOR WINDOW	65	4	each
66	66	\nProviding and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.	66	16	each
67	67	\nProviding and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. co	67	20	each
68	68	\nProviding and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles of approved quality with necessary screws etc. complete. (Approved brand - Godrej/ Dorset)	68	9	each
69	69	\nProviding and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer- in-charge. (Approved brand - Godrej/ Dorset)	69	1	each
70	70	\nProviding and fixing aluminium round shape handle of outer dia.100 mm with SS screws etc. coplete as per direction of E/I. Powder coated minimum thickness 50 micron aluminium.	70	2	each
71	71	\nProviding and fixing aluminium hanging floor door stoppers ISI marked anodized (anodic coating not less than grade Ac 10 as per I.S. 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Twin rubber stopper	71	26	each
72	72	\nProviding and fixing aluminium TOWER BOLTS ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required color or shade with necessary screws etc. complete.	72
73	73	a 300X 10MM ALUMINIUM DOOR -	73	4	each
74	74	\n150X 10MM	74	4	each
75	75	\nExtra for providing lipping with 2nd class teak wood battens 25mm minimum depth on all edges of shutters (over all area of door shutter to be measured).	75	99.48	sqm
76	76	Supplying, fitting & fixing M.S. GRILL made of 20 x 6 mm flat as per approved design and drawing properly fabricated with joints continuous fitted, welded and finished smooth, hoisting as per building specification and direction of E/I.	76
77	77	\nSupplying, fitting & fixing M.S. GRILL made of 20 x 6 mm flat as per approved design and drawing properly fabricated with joints continuous fitted, welded and finished smooth, hoisting as per building specification and direction of E/I.	77	1971	kg
78	78	\nProviding and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roof terraces etc. consisting of following operations.	78
79	79	(a) Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with proprietary water proofing compound conforming to IS : 2645 over the RCC slab including cleaning the surface before treatment.	79
80	80	(b) Laying cement concrete using broken bricks/brick bats 25 mm to 100 mm size with 50% of cement mortar of mix 1:5 ( 1 cement : 5 coarse sand ) admixed with proprietary water proofing compund conforming to IS :2645 over 20 mm thick layer of cement mortar 1:5 (1 cement : 5 coarse sand ) admixed with proprietary water proofing compund conforming to IS :2645 to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs	80
81	81	(c ) After two days of proper curing applying a second coat of cement slurry admixed with proprietary water proofing compound conforming to IS: 2645.	81
82	82	(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 ( 1 cement : 4 coarse sand ) admixed with proprietary water proofing compund conforming to IS : 2645 and finally finishing the surface with trowel with neat cement slurry and making of 300X300 mm square.	82
83	83	(e) The whole terrace so finished shall be flooded with water for minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the E/I.	83
84	84	With average thickness of 120 mm and minimum thickness at khurra as 65 mm. (WORKS TO BE DONE BY REGISTERED APPLICATOR OF PIDILITE/ SIKA/ ROFF WITH 10 YRS. GUARANTEE.)	84	731.86	Sqm
85	85	\nProviding applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth copmlete .	85	4070.49	Sqm
86	86	\nProviding two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I.	86	4205.88	Sqm
87	87	\nFinishing walls with Premium Acrylic Smooth exterior paint with silicone additives \"Snowcryl - XT\" of M/S Snowcem India Ltd, or equivalent of required shade. New work (Two or more coats applied @1.43 ltr / 10sqm. Over and including base coat of water proofing cement paint Snowcem Plus or equivalent applied @ 2.20 kg./10 sq.m. )	87	5310.69	Sqm
88	88	\nProviding and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall suface to prepare the surface even amd smooth complete.	88	1459.74	Sqm
89	89	\nFinishing walls with textured exterior paint of required shade :13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/ 10 sqm	89	3850.95	Sqm
90	90	\nProviding two coats of SYNTHETIC ENAMEL PAINT of approved shade and make over new WOODEN surface including cleaning the surface after removing dirt, scales, grease and sand papering, including cost of scaffolding etc. all complete as per building specification dirction of E/I.	90	185.31	Sqm
91	91	\nProviding Primer one coat of read lead paint of approved make over new STEEL SURFACE preparing the surface after cleaning, removing rust, dirt, scales, smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I.	91	122.07	Sqm
92	92	\nProviding 2 coats of SYNTHETIC ENAMEL PAINT of approved shade and make over STEEL SURFACE grills & railings including cleaning the surface thoroughly scaffolding and taxes all complete as per building specification and direction of E/I.	92	161.24	Sqm
93	93	\nProviding and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side the side of waist slab with suitable arrangement as per approval of Engineer-in-charge,(for payment purpose only only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners, etc.)	93	271.33	kg
94	94	\nProviding & fixing on wall face unplasticised - Rigid P.V.C. rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion . Single socketed pipes. 110 mm dia	94	110.78	Mtr
95	95	\nProviding & fixing on wall face unplasticised -P.V.C. moulde fittings / accessories for unplasticised - Rigid P.V.C. rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion .	95
96	96	\nCoupler - 110 mm	96	24	Each
97	97	\nSHOE - 110MM	97	24	Each
98	98	\nBEND 110 MM	98	48	Each
99	99	\nProviding and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.	99
100	100	\n110 MM	100	92	Each
101	101	\nStructural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. AREA OF AUDITORIUM - 8,953.00 SQ. FT. WT. OF TRUSS = @ 3.25 K.G. / S.FT.	101	40487.2	kg
102	102	\nProviding and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (Approved Brand - Tata Bluescope/ Equivalent)	102	1452.94	Sqm
103	103	\nProviding and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :	103
104	104	\nRidges plain (500 - 600mm)	104	40.74	Mtr
105	105	\nFlashings/ Aprons.( Upto 600 mm)	105	76.657	Mtr
106	106	\nGutter (600 mm over all girth)	106	81.097	Mtr
107	107	\nSteel work welded in built up sections as per drawing including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using steel in Spiral stairs. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete	107	1508.57	kg
108	108	\nProviding & ejecting Chemical emulsion for pre-constructional ANTI TERMITE TREATMENT and creating a chemical barrier under a alround the column pits, wall trenches, basement excavation, top surface of plinth filling junction of wall and floor along the external perimeter of building expansion joints, surrounding of pipes and conducts tic. complete (plinth area of the building at ground floor only shall be measured) with Chlorpyrifos 20% EC as per building specification and direction of E/I. (4 stages treatment)	108	1544.46	Sqm
109	109	Carriage of materials by truck or by any mechenical means loading,unloading & stacking etc. all complete job as per direction of E/I.	109
110	110	Bricks	110	764.38	No.
111	111	Local Sand	111	834.36	Cum
112	112	Coarse Sand	112	1389	Cum
113	113	Stone Chips	113	752	Cum
114	114	Stone Metal	114	486	Cum
115	115	Cement	115	664	MT
116	116	Steel	116	111.5	MT
117	117	Earth	117	154.81	MT
118	118	Interior Work	118
119	119	\nProviding and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7) in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm ) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised @80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’.	119
120	120	The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge. (Approved Brand - Armstrong/ Saint Gobain).	120
121	121	\nWith 20 mm thick beveled tegular mineral fibre false\nceiling tile (NRC 0.7), (Approved Brand - Armstrong/ Saint Gobain)	121	791.82	Sqm
122	122	\nProviding and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recomme-nded jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :	122
123	123	\n12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks) (Approved Brand - USG Boral/ Saint Gobain)	123	139.73	Sqm
124	124	\nExtra for sunk or raised mouldings in the plaster of paris (Gypsum anhydrous) ceiling.	124	33.848	Sqm
125	125	\nProviding fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Fibre glass wool conforming to IS : 8183, density 48kg / m3, 50mm thick, wrapped in 200 G Virgin Polythene bags, fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5 mm x 24 gauge wire mesh, for top most ceiling of building.	125	859.63	Sqm
126	126	\n38 mm thick wood block flooring of first class teak wood laid over 25 mm thick leveling layer of cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 10 mm nominal size) to be paid separately, coated with a thin layer of hot bitumen penetration 80/25 (blown type) @ 2.45 kg per sqm, including fixing blocks in position after dipping in hot bitumen (blown type) up to half depth, planed, levelled smooth and finished complete.	126	211.347	Sqm
127	127	\nProviding and Fixing Channeled Woodworks perforated panels of width 128mm, thickness of 16mm and length 2440 mm or as required by the Architect/ approving engineer, made of a high density particle board substrate with a laminated facing as per the approved shade/ species & finish and a melamine balancing layer on the reverse side. The boards shall have a special perforation pattern where the visible surface has a (“Helmholtz” fluted perforation of 2mm width and 14mm of visible panel / 4mm width and 28mm visible panel) each. The panels shall provide a minimum sag resistance of RH90 and a fire rating class of 1 as per Part 7 of BS 476. The edges of the panels shall be “tongue-and-grooved” to receive special clips for installation. The back of the perforated panel shall have sound absorbing non-woven acoustical fleece. The panels shall be mounted on special aluminium splines using clips provided by Armstrong and approved by the Architect/ Engineer-in-Charge.\n	127
128	128	INSTALLATION: Install wooden battens (provided by others) of section 50mmx50mm or as approved by the Architect on the solid wall horizontally using screws and plugs at spacing of 600mm centre-to-centre. Screw the aluminium extruded keel for channelled woodworks (GTPT001) provided by Armstrong over the lowest and second wooden batten at an on-center distance of 600mm. Install the first set of wooden panels by inserting the clips for border channelled woodworks (GTPT002) and insert the groove of the panel into the projecting flange of the aluminium clip. Continue installing rows of panels by inserting the tongue into the groove of the earlier inserted panel and progressively installing clips for inside channelled woodworks (GTPT003) into the next keel till the actual height is achieved. Use clips for border channelled woodworks (GTPT002) to finish off the installation. Finish off the edges using wooden moulding of matching colour (provided by others). Approved Brand - Armstrong/ Anutone)LENGTH OF WALL = 356	128	231.507	Sqm
129	129	\nProviding supplying and installing Armstrong \"Optra Acoustical Wall Panelling\" with square edge made of fibre glass subtrate 25mm thick and wrapped on the front side with an acoustically transparent and fire resistant fabric with an option of colours as per the choice of the Architect of size 2100x600 or 600x600mm providing a minimum sound absorption level of 0.90 NRC to be affixed to wall using wall panel impalers including fixing of panel to the wall surface by self taping screws. Silica based construction adhessive shall be dabbed on to the prjecting elements (spikes) of the impalers and panels shall be pierced through the spikes with maintaining the line and level of panel Approved Brand - Armstrong/ Anutone)	129	330.724	Sqm
130	130	\nProviding and fixing Roller Blind (VISTA LEVELLOR) including all fittings and labour, complete job.	130	99.77	Sqm
131	131	Water Supply & Sanitary work	131
132	132	\nProviding and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast iron P or S trap, 10 litre low level white P.V.C. Flushing cistern with munally controlled device (handle lever) conforming to IS:7231 Parryware/ Hindware with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.	132
133	133	\nWhite Vitreous China Orissa pattern W C pan of size 580 X 440 mm with integral type foot rest.	133	7	Each
134	134	\nProviding and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled devicde (handle lever), conforming to IS:7231, parryware/Hindware/with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. \nW.C. pan with ISI marked white solid plastic seat and lid.	134	9	Each
135	135	\nProviding and fixing C.P. brass bib cock of approved conforming to IS 8931 \n15mm nominal bore approved brand C.P. fittings	135	16	Each
136	136	\nProviding and fixing C.P.brass long body bib cock of approved quality conforming to standard and weight not less thain 810gms.	136
137	137	\n15mm nominal bore approved brand C.P. fittings	137	8	Each
138	138	\nProviding and fixing C.P Soap Dish of aaproved size, shape and approved brand with concealed fittings, complete job.	138	16	Each
139	139	\nProviding and fixing Wash basin with accessories, 15mm C.P. pillar cock 32mm C.P brass waste of cutting and making good the wtherever require all complete.	139
140	140	BASIN - CAT. NO. - JAQUAR, CNS-WHT-705 (WITH RIM TOP)	140	2	Each
141	141	PILLAR COCK - FUS - 29001	141	2	Each
142	142	BOTTLE TRAP - CAT. NO. - JAQUAR, ALD - 769L - 300X190	142	2	Each
143	143	WASTE COUPLING - CAT. NO. - JAQUAR, ALD - 709	143	2	Each
144	144	\nProviding and fixing C.P. brass angle valve for basin mixer, gyser & others points of approved quality conforming to IS 8931 15mm nominal bore, approved brand C.P. fittings.	144	65	Each
145	145	\nProviding and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:	145
146	146	\nWhite Vitreous China Wash basin size 630x450 mm with\na single 15 mm C.P. brass pillar tap	146	20	Each
147	147	\nProviding and fixing white vitreous china flat back half stall urinal of 580X380X350mm with white PVC automatic flushing cistern, parryware/Hindware with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass with waste fitting as per IS : 2566 P.V.C. trap with outlet grating and other couplings in C.P. brass including parenting of fitting and cutting and making good the walls and floors wherever required..	147
148	148	\nSingle half stall urinals with 5 litre P.V.C. auotmatic flushing cistern	148	13	Each
149	149	Less for cistern from urinal\nDeduct the 5 litre P.V.C. auotmatic flushing cistern fron urinal	149	13	Each
150	150	\nProviding and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end )	150
151	151	\n32MM nominal bore.	151	6	Each
152	152	\nProviding and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete.	152
153	153	\n25mm nominal bore	153	7	Each
154	154	\nProviding and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.	154	16	Each
155	155	\nProviding and fixing 100mm dia. Steel Jali of approved quality.	155	55	Each
156	156	\nProviding and fixing stainless steel A ISI 304(18/8) kitchen sink as per I.S.13983 with C.I. Brackets stainless steel plug 40mm including painting of fittings and brackets cutting and making goods the walls wherever required:	156
157	157	kitchen sink without drain board	157
158	158	610x510mm bowel depth 200mm	158	5	Each
159	159	\nProviding and fixing C.P Sink cock with swinging casted spout with concealed fitting arrangements.	159	5	Each
160	160	\nProviding and fixing unplasticised P.V.C. connection pipe with c.p. nuts collar and bush of approved quality. 15 mm nominal bore with 45 cm length.	160	34	Each
161	161	\nProviding And fixing 32 mm waste pipe for sink or wash basin including P.V.C. waste fittings complete.	161
162	162	\nFlexible Pipe	162	27	Each
163	163	\nProviding and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. (ITEM FOR RAIN WATER, SOIL, WASTE & VENT PIPES)	163
164	164	\n75 mm dia	164	75	Mtr
165	165	\n110 mm dia	165	150	Mtr
166	166	\nProviding & fixing on wall face unplasticised -P.V.C. moulde fittings / accessories for unplasticised - Rigid P.V.C. rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion .	166
167	167	\nCoupler -110mm	167	24	Mtr
168	168	\nSingle pushfit Coupler 110mm	168	11	Mtr
169	169	\nSingle tee with door 110X110X110 MM	169	11	Mtr
170	170	\nSingle tee without door 110X110X110 MM	170	20	Mtr
171	171	\nBend 87.5° 110 MM	171	25	Mtr
172	172	\nSHOE 110mm	172	12	Mtr
173	173	\nNahani Trap 110X75 MM	173	55	Mtr
174	174	\nMultitrap 110X100 MM	174	35	Mtr
175	175	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joining of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I.(Approved Brand - ASTRAL/ SUPREME)	175
176	176	\nConcealed work including cutting chases and making good the wall etc..	176
177	177	\n15mm dia	177	90	Mtr
178	178	\n20mm dia	178	125	Mtr
179	179	\nProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joining of pipes & fittings with one step CPVC solvent cement & testing of joints complete as per direction of E/I. (Approved Brand - ASTRAL) Exposed on Wall	179
180	180	\n25mm dia	180	70	Mtr
181	181	\n32 mm dia.	181	150	Mtr
182	182	\nProviding and laying non- pressure NP2 class ( light duty ) R.C.C. pipes with collars jointed with still mixture of cenent mortar in the proportion of 1:2 ( lcement : 2 fine sand ) including testing of joints etc. complete.	182
183	183	\n150 MM dia R.C.C. pipe	183	250	Mtr
184	184	\n250 MM dia R.C.C. pipe	184	70	Mtr
185	185	\nConstructing brick masonary chamber for Underground C. I. Inspection Chamber and bend with 75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. Cover with frame (light duty) 455X610 mm internal dimensions, total weight of cover with frame to be not less than 38 KG. (weight of cover 23 kg. and weight of frame 15 kg) RCC top slab with 1:1.5:3 mix (1 cement:1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 mix (1 cement:5 coarse sand :10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm th. with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:	185
186	186	\nInside dimensions 455X610X mm and 45 mm deep for single pipe	186
187	187	\nWith common burnt clay F.P.S. (non modular)\nbricks of class designation 7.5	187	47	Mtr
188	188	\nProviding and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.	188	5000	Ltr
189	189	\nProviding and fixing C.P. brass Health Faucet with 8mm dia. 1.20m long flexible tube & wall hook.	189
190	190	\nHand Shower - CAT. NO. - JAQUAR, ALD - 573	190	9	each
191	191	\nProviding and fixing C.P. Towel Ring	191
192	192	Towel Ring - CAT. NO. - JAQUAR, AQN - 7721	192	16	each
193	193	Septic Tank	193
194	194	\nEarth work in excavation in foundation trenches in ordinary soil (vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I.	194	54.61	Cum.
195	195	\nExtra for earthwork in hard soil as per specification and direction of E/I. ( Vide classification of soil iten _B)	195	54.61	Cum.
196	196	\nProviding coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume)	196	1.79	Cum.
197	197	\nProviding designation 75 A one brick flat soling joints files with local sand including cost of watering taxes royalty all complete as per building specefication and direction of E/I	197	22.72	Sqm
198	198	\nProviding P.C.C.M 150 in normal mix of (1:2:4) in foundation with approved quality of stone chips 20 mm 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I	198	3.19	Cum.
199	199	\nProviding R.C.C.M 200 nominal mix of (1:1.5: 3) in beam of all types with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, ( but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/I	199	0.07	Cum.
200	200	\nProviding designation 125 mm thick reinforced designation 75A brick work in CM (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 25 including the cost of screening, carriage of materials, scaffolding , raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforcement) all complete as per building specification and direction of E/I.	200	6	Sqm
201	201	\nProviding Precast R.C.C.M - 200 with nominal mix of (1:2:4) slab of desired size with approved quality of stone chips and clean coarse sand of F.M. 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement ) taxes and royalty , all complete as per building specification and direction of E/I.	201	1.51	Cum
202	202	\nProviding designation 75A brick work in C.M (1:4) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I.	202	17.55	Cum
203	203	\nProviding 12mm thick cement plaster (1:3) with clean coarse sand of F.M. 1.5 approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.	203	110.6	Sqm
204	204	\nProviding 1.5 mm thick cement punning including curing, carriage of water with all leads and lifts of water as per building specification and direction of E/I.	204	110.6	Sqm
205	205	\nSupplying, fitting and fixing C.I. cover with frame for mane hole and inspection chamber with all leads and lifts including cost of all materials, labours, royalty and taxes all complete as per building specification and direction of E/I. \n (a) Size 600 x 450 mm (Wt. 25 Kg).	205	2	Each
206	206	\nProviding Tor steel reinforcement of 8 mm dia rods as per approved design and drawing excluding carriage of bars to work site cutting bending and binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per builing specification and direction of E/I. (Onaly valid for SAIL, TATA Stee, JSPL, Electro Steel Ltd and Vizal Steel)	206	0.168	M.T.
207	207	\nProviding Tor Steel reinforcement of 10mm , 12 mm & 16 mm dia bars as per approved design and drawing excluding carriage of bars to work site, cutting bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I	207
208	208	10 mm (TMT coil Fe 500) ((Onaly valid for SAIL, TATA Stee, JSPL, Electro Steel Ltd and Vizal Steel)	208	0.102	M.T.
209	209	Carriage of materials by truck or by any mechenical means loading,unloading & stacking etc. all complete job as per direction of E/I.	209
210	210	Bricks	210	8.266	No.
211	211	Local Sand	211	2.39	Cum
212	212	Coarse Sand	212	10.55	Cum
213	213	Stone Chips	213	3.61	Cum
214	214	Cement	214	3.15	MT
215	215	Steel	215	0.27	MT
216	216	\nMaking Soak Pit 2.5 m diameter 3.0 meter deep with 45x45cm dry briick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8m long complete as per standerd design .	216	2	each
217	217	Rain water Harvesting	217
218	218	\nEarth work in excavation in foundation trenches in ordinary soil (vide classification of soil item - A) and disposal of excavated earth as obtained to a distance upto 50 M. including all lifts, levelling, ramming the foundation trenches, removing roots of trees, shurbs all complete as per approved design building specification and direction of E/I.	218	59.04	cum
219	219	\nEarth filling in foundation trenches and plinth in layers not exceeding 150 mm thick well watered rammed, fully compacted & fine dressed with obtained from excavation of foundation trenches within a lead of 50 M & lift of 1.5 M all complete as per building specification and direction of E/I. ( Mode of measurement compacted volume)	219	59.04	cum
220	220	\nProviding coarse clean local SAND IN FILLING in foundation trenches or in plinth including ramming and watering in layer not exceeding 150 mm thick with all leads and 1.5 M lifts including cost of all materials, labours, royalty and taxes all complete as per building specification and direction of Engineer Incharge (Mode of measurement compacted volume)	220	8.612	cum
221	221	\nProviding designation 75-a, BRICK FLAT SOLING joints filled with local sand including cost of watering,taxes and royalty all complete as per building specification and direction of Engineer Incharge	221	14.4	sqm
222	222	\nProviding P.C.C. M-15 with nominal mix of (1:2:4) in FOUNDATION and plinth with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer, placing in position vibrating striking curing taxes and royalty all complete as per building specification and direction of E/I.	222	1.46	cum
223	223	\nProviding designation 751 brick work in C.M. (1:6) in foundation & plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm. thick mortar joints,cost of screening materials raking out joints to 15mm depth , curing, taxes & royalty all complete as per building specification & direction of E/I.	223	17.22	cum
224	224	\nProviding tuck pointing [1:3] in cement on brick work clean coarse sand of F.M 1.5 FM-1.5 including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all complete as per building specification and direction of E/I	224	47.44	sqm
225	225	\nProviding 12mm cement plaster(1:3) with clean course sand of F.M 1.5 with floating coat of neat cement in skirting including rounding of junctions with floor, curing taxes and royalty all complete as per building specification and direction of E/I.	225	12.82	sqm
226	226	\nDT: Basic rates for 125/115 mm dia Drilled Tube-well for drilling in all kinds of soil and rock for installation of hand pump with DTH ring Machine all complete including supplying all meterial, labours, tools, drilling, rigs, air compressor and equipments as well as fuel lubricant, for making 125/115 mm dia boring etc. and cost of transporting rig machine and other vehicle up to site of work as per specification and direction of engineer-in-charge. (Basic rates)	226
227	227	(i) Drilling up to 30 mtr. Depth below G.L. in Rural Area	227	60	P/M
228	228	\nSupplying, assembling, lowering and fixing in vertical position in borewell unplasticized PVC medium well screen (RMS) pipes with ribs, confirming to IS: 12818, including hire and labour charges, fittings and accessories etc. all complete, for all depths, as per direction of engineer-in-charge.	228
229	229	\n100 mm nominal size dia. -	229	60	Mtr
230	230	\nSupplying,filling, spreading and levelling stone boulders of of size range 5cm to 20 cm, in recharge pit, in the required thickness, for all leads and lifts, all complete as per direction of Engineer-in-charge.	230	5.64	cum
231	231	\nSupplying,filling, spreading and levelling gravels of size range, 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in the required thickness, for all leads and lifts, all complete as per direction of E/I.	231	5.64	cum
232	232	\nProviding R.C.C. M-20 with normal mix of 1:1.5:3 in SLAB with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening shuttering, mixing cement concrete in mixer, placing in position vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/I.	232	1.3	cum
233	233	\nProviding T.M.T. Reinforcement of following dia Rods as per approved design and drawing including carriage of M.S. Rods of (Straight or in coils) to work site, cutting, bending and binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction and direction of E/I. (Only valid for TATA TISCON/SAIL/JINDAL/ELECTROSTEEL/RINL).	233
234	234	TOR 8MMDIA. -	234	0.2	MT
235	235	\nConstructing brick masonary chamber for Underground C. I. Inspection Chamber and bend with 75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. Cover with frame (light duty) 455X610 mm internal dimensions, total weight of cover with frame to be not less than 38 KG. (weight of cover 23 kg. and weight of frame 15 kg) RCC top slab with 1:1.5:3 mix (1 cement:1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 mix (1 cement:5 coarse sand :10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm th. with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:	235
236	236	Inside dimensions 455X610X mm and 45 mm deep for single pipe line with common burnt clay F.P.S. (non modular) bricks of class designation 7.5	236	20	Each
237	237	\nProviding and laying non- pressure NP2 class ( light duty ) R.C.C. pipes with collars jointed with still mixture of cenent mortar in the proportion of 1:2 ( lcement : 2 fine sand ) including testing of joints etc. complete.	237
238	238	\n150 MM dia R.C.C. pipe	238	100	Mtr
239	239	\n250 MM dia R.C.C. pipe	239	100	Mtr
240	240	Supply rate of 7029/ d.s.r./ page 31 + 10% c.p.\nSupplying fitting and fixing Galvanised wire mesh of average width of aperture 1.4 mm and nominal\ndia of wire 0.63 mm (2'-0\"x2'-0\"*2) in position as per specification and direction of E/I.	240	1.48	sqm
241	241	Carriage of materials by truck or by any mechenical means loading,unloading & stacking etc. all complete job as per direction of E/I.	241
242	242	Bricks	242	9	No.
243	243	Local Sand	243	8.612	Cum
244	244	Coarse Sand	244	8	Cum
245	245	Stone Chips	245	1.2	Cum
246	246	Cement	246	3	MT
247	247	Steel	247	0.2	MT
248	248	Fire Fighting	248
249	249	Sub Head - I (Pumps & Equipments )	249
250	250	\nSupplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325. M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. Suitable cement concrete foundation duly plastered and with anti vibration pads.	250
251	251	\nTerrace Booster pump 900 LPM, 35 M head	251	2	each
252	252	\nSupply and fixing of PVC sheathed following conductor 1.1 KV grade armoured Cable of following sizes including making end termination with compression gland & bimetalic lugs, and support etc.complete as required	252
253	253	\n4 × 10 sq.mm.(aluminium)	253	30	Mtr
254	254	2 x 1.5 sq mm	254	30	Mtr
255	255	\nStarter Panal for Terrace Fire Fighting pump, with all necessary connections and wiring, complete as required.	255	1	each
256	256	\nSupplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required :	256
257	257	\n100 mm diameter	257	1	each
258	258	\nSupplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :	258
259	259	\n 80 mm diameter	259	6	Each
260	260	\n 100 mm diameter	260	12	Each
261	261	\nProviding, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :	261
262	262	\n 80 mm diameter	262	1	Each
263	263	\n100 mm diameter	263	3	Each
264	264	\nPressure Gauge Assemble with Gate/Ball Valve	264	3	Each
265	265	\nPressure Sensor / Switch	265	3	Each
266	266	\nAir release / Drain Valve	266	3	Each
267	267	\nMS Structure support for piping	267	200	Kg
268	268	Sub Head - II ( Fire hydrant System )	268
269	269	\nProviding, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :	269
270	270	\n100 mm diameter	270	210	mtrs
271	271	\n80 mm diameter	271	30	mtrs
272	272	\n25 mm diameter	272	12	mtrs
273	273	\nSupplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :	273
274	274	\nSingle headed Gunmetal	274	8	Set
275	275	\nSupplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.	275
276	276	\n40 m	276	6	Set
277	277	\nProviding and fixing 25 mm nominal gun metal gate valve class I with CI wheel of approved quality with union (Screwed end)	277	10	Each
278	278	\nSupplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :	278
279	279	\nGun Metal	279	8	Each
280	280	\nSupplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :	280
281	281	\nGun metal	281	8	Nos.
282	282	\nSupplying and fixing of hose cabinet of size 450mm x 450mm x 250mm made of 2mm thick M.S. sheet with 6mm thick glazed glass door including necessary locking arrangment suitable to accomodate external hydrant with butterfly valve, 1 nos. 15 mtr. long hose pipe, 1 no. branch pipe mounted on wall or raised brick platform and duly painted with post office red externally and white internally with synthetic enamel paint complete in all respect for external hydrant as required complet in all respects.	282	8	Each
283	283	\nSupplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :	283
284	284	\n4 way - 150 mm dia M.S. Pipe	284	1	Each
285	285	\nProviding , fixing Dry Chemical Powder (Stored Pressure Type) Mono Ammonium Phosphate 50% powder confirming to ‘IS 14609’ , Nitrogen Pressurized, Controllable Discharge Mechanism, Pressure Gauge, Discharge Hose & Nozzle Epoxy Polyester Powder Coated As per ‘IS 15683’ ISI mark Fire Extinguishers. Operating Temperature: - (-) 20oC to (+) 55oC Suitable for ‘A’ ‘B’ ‘C’ Class of FIRE complete in all respects (6 Kg Capacity)	285	16	Each
286	286	\nCarbon Di-oxide Type , Gas Confirming to IS ‘15222’ , Cylinder Confirming to ‘IS 7285’ & PESO approved ,Controllable Discharge Mechanism, Discharge Hose & Horn As per ‘IS 15683’ & ‘IS 2878’ ISI mark Fire Extinguishers (Wheel Type or Squeeze Grip Type). Operating Temperature :- (-)20oC to (+)55oC Suitable for ‘B’ ‘C’ Class of FIRE (4.5 Kg Capacity)	286	10	Each
287	287	Sub Head-III (Fire Alarm & PA system )	287
288	288	\nSupplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications.	288
289	289	\nTen Loop Panel.	289	1	Nos.
290	290	\nSupplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required.	290	90	Nos.
291	291	\nSupplying, installation, testing & commissioning of addressable horn cum strobe complete as required.	291	6	Nos.
292	292	\nSupplying, installation, testing & commissioning of addressable manual call point complete as required.	292	6	Nos.
293	293	\nSupplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with\nmain fire alarm panel for voice evacuation complete as required.	293	1	Nos.
294	294	\nSupplying, installation, testing & commissioning of ceiling/wall mounted loud speaker, 3/1.5 Watt in ABS enclosure complete as required.	294	90	Nos.
295	295	\nSupplying, installation, testing & commissioning of digital audio amplifier 75 Watt, 25V rms operating at 240 Volt AC Supply complete as required.	295	1	Nos.
296	296	\nSupplying, installation, testing & commissioning of Voice command keypad 6 zone, with microphone assembly complete as required.	296	1	Nos.
297	297	\nSupply and laying of 1. 5 sq. Mm double core copper wire in existing PVC Conduit. (MAKE: POLYCAB, MESCAB)	297	1800	Mtrs.
298	298	\nSupplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed\nconduit as required.	298
299	299	\n25 mm	299	1800	Mtrs.
300	300	200x150 mm DIA DEEP BORE WELL WITH PUMP SET	300
301	301	\nBasic rate item no. 119 M 1035 Suppling all materisls labour and tools and cost of drilling 200mm x 165mm bore well in all kinds of soil and rock in rural area for installation of pump set with hydrolic DTH rig machine, all complete including suplying all materials tools, drilling rig, Air compressor and equipments, as well as fuel, lubricants and cost of transprtation of Rig machine and other vehicles up to the site.	301
302	302	From 0.0M to 50.0 M belew G.L	302	100	P/M
303	303	From 51.0 M to200.00 M belew G.L	303	300	P/M
304	304	\nBasic rate item no. 120 M 1036\nsupplying all tools, tackles & lowering of 200 mm dia MS ERW casing pipe of 6mm wall thickness including welding charges, cost of pipe itc including all taxes, VAT, Excise duty, freight charges with inspection charges etc as applicable, etc all complete job.	304	60	P/M
305	305	\nBasic rate item no. 126 M 1042\nCleaning Flushing and devloping of drilled hole for testing the discharge of water development of bore well by continueous flow of water bu using heavy compresser upto satisfaction of E/I. To get uniterrupted flow of water free from sand and soil etc.	305	3	Hr
306	306	\nBasic rate item no. 120 M 1036\nSupplying and fitting M.S cap over 200mm dia casing pipe as per direction of E/I .	306	2	Each
307	307	\nBasic rate item no. 139 M 1055\nSupplying 100 mm dia submersible pump sets confirming to IS 8034 and motor confirming to IS 9283. Pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/ noryl impeller. Motor suitable for working on 415V + 10%, 3PH, 50 Hz, A.C. supply with cable guard, thrust carbon/ fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. The pump set shall be suitable for direct coupling. Pump shall have suitable outlet as per manufacturers design. Anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single/ double run shall be provided with each pump.	307
308	308	Submersible Pump 150 mm dia ( with Bronze impeller) up to 8 stages\n2.0 HP	308	2	Each
309	309	WD & SD \nBasic rate item no. 149 M 1065\nSupplying Fully Automatic Starter to operate induction motor working on 415v, 3 phase ,50 hz with no volt coil , Over load element , ON-OFF push buttons with necessary materials and connected to supply etc complete starter with original sheet steel encloser as per IS: 3914.\nF.A.S.D. Starter	309	2	Each
310	310	\nBasic rate item no.146 M1062\nSupplying 3 core flat flexible submersible cable with, copper conductor, PVC insulated and PVC sheathed as per IS : 7098\n3 Core 4mm thick	310	260	M
311	311	\n2no heavy duty clamp 40mm dia duitable for pipe with all complet job.	311	4	Each
312	312	\nBasic rate item no. 9(K) (v)\nSupplying & lowering 40mm da column G. I. pipe with all complete job.	312	150	P/M
313	313	INTERNAL & EXTERNAL ELCTRIFICATION WORK	313
314	314	Note:- OF MAKE\n (1)PVC insuleted copper conductor wire of make:-Havell's/Polycab/Finolex \n (2)PVC conduit of thiknss 1.5mm/2mm for wiring:-Polycab/ANCHOR/AKG\n (3) GI modular box of make -: Anchor/ Havells/Legrand/ABB \n (4)Switches/soket outlet for modular type:- Anchor (roma)/Havells(cabtree)/Legrand/Schneider/C&S\n (5)MCCB,MCB,SFU,CHANGEOVER,RCCB,MCB-DB:-Havell's/L&T/Legrand/Schneider\n (6)XLPE/PVC aramoured cable:-Havell's/Polycab/V-guard\n (7) LED ITTING FIXTURE -: Havells/Bajaj/ Crompton (Model/as per E/I )/C&S\n (8) CEALING / WALL / EXHAUST FAN -: Havells / Bajaj / Usha / Crompton (Model/as per E/I )/POLAR\n (9)OCTAGONAL POLE-: Bajaj/Philips/Surya\n (10) CHEMICAL EARTHING OF MAKE - TRUEPOWER EARTHING\n (11) CENTRALISED AIR CONDITIONING OF MAKE - VOLTAS/MITSHUBISHI/ \n TOSHIBA/HITACHI\n (12)ALL ELECTRICAL WIRING WORK SHOULD BE CONCEALED	314
315	315	\nPoint wiring in PVC conduit, with modular type switch:-Wiring for light point/fan point/exhaust fan point/call bell point with 1.5. sq.mm FR PVC Insuleted copper conductor single core cable in recessed PVC conduit, with modular type switch, pheonlic lamineted sheet,suitable size G.I.box etc.	315
316	316	\nGroup B	316	183	Point
317	317	\nPower plug wiring in PVC conduit (2x4 sq mm) :- Wiring for light/Power plug with 2x4 sq mm FR PVC insuleted copper conductor single core cable in recess PVC conduit along with 1 Nos. 4 sq mm FR PVC insuleted copper conductor single core cable for loop earthing as required.	317	600	Metre
318	318	\nCircuit/submain wiring in PVC conduit:-Wiring for circuit/submain wiring along with earth wire with the following size PVC insuleted copper conductor single core cable in recessed PVC conduit as required	318
319	319	\n2x1.5 sq mm+1x1.5 sq mm earth wire(for dimmer light and foot light wiring)	319	3200	Metre
320	320	\n2x2.5 sq mm+1x2.5 sq mm earth wire	320	498	Metre
321	321	\n4x2.5 sq mm+2x2.5 sq mm earth wire (for spn db 4 way submain)	321	85	Metre
322	322	\n4x6 sq mm+2x6 sq mm earth wire (subman wiring & vrf circuit)	322	140	Metre
323	323	\n4x10 sq mm+2x10 sq mm earth wire (subman wiring & vrf circuit)	323	220	Metre
324	324	\n4x16 sq mm+2x6 sq mm earth wire (submain wiring for vrf)	324	142	Metre
325	325	\n4x25 sq mm+2x16 sq mm earth wire\n(sub main wiring for stage light and sound system panel)	325
326	326	1.24\nS/F modular type switch /socket :- Supplying and fixing following modular type switch box/cover including connections but excluding modular plate etc as required	326
327	327	\n5/6 amps, one way switch	327	36	Each
328	328	\n5/6 amps, 3 pin socket outlet	328	36	Each
329	329	\nS/F Modular type electronic fan regulator:-Supplying and fixing stepped type fan regulator on the existing modular plate switch box including connectionons but excluding modular plate etc, as required.	329	19	Each
330	330	\nS/F Modular type blanking plate:-Supplying and fixing modular blanking plate on the existing modular plate switch box excluding modular plate etc, as required.	330	18	Each
331	331	\nS/F Modular boxes, base & covre plate:-following size/ modular G.I box along with modular base & cover plate for modular switches in recess etc, as required.	331
332	332	\n4/5 module(78mm x 140mm x 50mm)	332	30	Each
333	333	\n6 module(78mm x 205mm x 50mm)	333	8	Each
334	334	\nS/F power plug point with modular type accessories:- Supplying and fixing suitable size G.I.box with modular plate and cover in front on recess including providing and fixing 6 pin, 15/16 amps modular socket outlet and 15/16 amps modular switch conection painting etc, as required.	334	20	Each
335	335	\nS/F ceiling rose:-\nSupplying and fixing 2 pin 5 amp, ceiling rose on the existing junction box/wooden block including connection etc as required.	335	44	Each
336	336	\nErrection on incandescent light fitting:-\nErrection of wall bracket/ceiling fitting, complete with all accessories including connection etc as required.	336	98	Each
337	337	\nS/F Dingdong Call bell :-\nSupplying and fixing dingdong call bell suitable for DC/AC single phase,230 volt, complete as required.	337	1	Each
338	338	\nS/F twin twisted cable :-\nProviding and fixing plain 16/.20 mm (0.50 sq mm) twin twisted, flexible,FR PVC insuleted copper cable, in polythene sleeve of suitable size on the floor/wall ,or side of the table door etc as required(for dimmer light)	338	2900	Meter
339	339	\nITC fluorescent fitting directly on surface:-\nInstaliation, testing and commissioning of prewired, fluorescent fitting of all types, complete with all accessosries and tube etc. directly on ceiling /wall including connection with 1.5 sq mm.FR PVC insulated, copper conductor.	339	18	Each
340	340	\nITC ceiling/wall fan:-\nInstaliation, testing and commissioning of ceiling fan including wiring the down rod of standard length( uptwo 30 cm) with 1.5 sq mm.FR PVC insulated copper conductor, single core cable etc as required	340	34	Each
341	341	\nITC exhaust fan up to 450 mm, sweep:-\nInstallation of exhaust fan up to 450 mm. sweep in the exiting opening, including making the hole to suit the size of above fan, making good the damage, connection testing commissioning etc as required.	341	10	Each
342	342	\nS/F S.P. MCB DB:-\nSupplying and fixing following way single pole nutral,sheet,MCB distribution board,240 volt,in recess,complete with tinned copper busbar,earth bar, din bar, detachable gland plate, interconnections, phosphatized and power painted including earthing etc. as required.(But without MCB/RCCB/ISOLATOR)	342
343	343	\n4 Way,Double door( for foot light control)	343	1	Each
344	344	\nS/F T.P.MCB DB:-\nSupplying and fixing following way three pole and nutral,sheet,MCB distribution board,415 volt,in recess,complete with tinned copper busbar,earth bar, din bar, detachable gland plate, interconnections, phosphatized and power painted including earthing etc. as required.(But without MCB/RCCB/ISOLATOR)	344
345	345	\n4 way (4+12),Double door, Horizontal type	345	4	Each
346	346	\n6 way (4+18),Double door, Horizontal type	346	3	Each
347	347	\nS/F 'B' series. S.P.MCB:-\nSupplying and fixing 6 amps to 32 amps rating,240 volts, 'B' series miniature circuit breaker suitable for lighting and others loads of following poles in the exiting MCB DB complite with connections. Testing and commisioning etc as required.	347
348	348	\n6/32 amps,single pole, \"B\" SERIES	348	34	Each
349	349	\nS/F 'C' series. S.P.MCB:-\nSupplying and fixing 6 amps to 32 amps rating,240 volts, 'C' series miniature circuit breaker suitable for lighting and others loads of following poles in the exiting MCB DB complite with connections. Testing and commisioning etc as required.	349
350	350	\n6/32 amps,single pole, \"C\" SERIES	350	20	Each
351	351	\n6/32 amps,TPN(for foot light)	351	1	Each
352	352	\n40 amps,TPN(for vrf supply)	352	9	Each
353	353	\n50/63 amps, TPN	353	7	Each
354	354	\nS/L 8 SWG copper wire ground :-\nSupplying and laying 8 SWG copper wire 0.50 metre bellow ground level for conductor earth electrode, including soldring etc. as required.	354	120	Metre
355	355	\nP/F G.I. lightning conductor finial:-\nProviding and fixing of lighting cnductor finial, made of 25 mm dia 300mm long, copper tube having single prong at top, with 85mm dia 3mm thick G.I. base plate including holes etc. complete as required.	355	5	Each
356	356	\nReverting, sweating and soldering of copper/G.I. tape(with another coppr/G.I. tape, base of the finial or any other metallic object) as required.	356	15	Each
357	357	\nP/F G.I. lightning conductor tape in horizontal run:-\nProviding and fixing GI tape 20mm x 3mmthick on parapet or surface of wall for lightning conductor complete as required(For horizontal run)	357	150	Metre
358	358	\nP/F G.I lightning conductor tape in vertical run:-\nProviding and fixing GI tape 20mm x 3mmthick on parapet or surface of wall for lightning conductor complete as required(for vertical run)	358	50	Metre
359	359	\nP/F Testing joint for G.I. lighting conductor:-\nProviding and fixing testing joint, made of 20mm x 3mm thick G.I. strip, 125mm long, with 4 nos.of G.I. bolts, nuts, chek nuts and spring washers etc complete as required.	359	5	Each
360	360	\nMV cable laying upto 25 sq.mm. in ground:-\nLaying of one number PVC insuleted and PVC sheathed/ XLPE power cable of 11 KV grade of size not exceeding 25 sq.mm. direct in ground including excavetion, sand coushioning, protective covering and refilling the trench etc as required.	360	498	Metre
361	361	\nMV cable laying upto 400 sq.mm. in ground:-\nLaying of one number PVC insuleted and PVC sheathed/ XLPE power cable of 11 KV grade of size not exceeding 120 sq.mm. but not exceeding 400 sq.mm. direct in ground including excavetion, sand coushioning, protective covering and refilling the trench etc as required.	361	500	Metre
362	362	\nS/L PVC XLPE insuletd PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor for working voltage upto and including 1100 volts,(conforms to IS:1554, part-1)	362
363	363	\n10 sq.mm. 2 core (for bollard)	363	150	Metre
364	364	\n16 sq.mm. 4 core	364	600	Metre
365	365	\n70 sq.mm. 3.5 core	365	145	Metre
366	366	\n300 sq.mm. 3.5 core	366	900	Metre
367	367	\nSupplying and fixing of light class G.I. pipe of 100 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required	367	4	Each
368	368	\nConstructing pedestal for installing light fitting outside building made up of (1:6 ) C.M Brick work with 75A designation brick of size 450 x 450 x 900 mm 400 mm umbeded in ground over 50 mm thick PCC projected 50 mm on all side and top of pedestal to be covered with 75 mm PCC to supports bolts/ fittings of light completed with plaster and a coat of neat cement punning all complete including exavation etc whatever required as per direction of E.I.	368	14	Each
369	369	\nDrilling for road crossing by horizontal direction drilling (HDD) machine for cable laying	369	80	Meter
370	370	\nSupplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.	370
371	371	\n4 X 16 sq. mm (28mm)	371	29	Each
372	372	\n3½ X 300 sq. mm (70mm)	372	4	Each
373	373	\nSupplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required.	373	25	Each
374	374	FIXTURE AND CHEMICAL EARTHING	374
375	375	\nProviding of 12'' (300 mm)exhaust fan of make bajaj/havells/usha/crompton	375	10	Each
376	376	\nProviding of 48'' (1200 mm) ceiling fan of make bajaj/havells/usha/crompton	376	19	Each
377	377	\nProviding of 16'' (400 mm) Wall fan of make bajaj/havells/usha/crompton	377	6	Each
378	378	\nProviding of Recess/surfaces mounted LED round down light (18/20 watt) of make bajaj/havells/crompton	378	98	Each
379	379	\nS.I.T.C of following rating LED street lighting with pressure dia cast housing and toughened glass cover (IP 66 protection)in existing pole/pipe/platform/periferial wall for supply voltage 100-270v AC,50Hz Luminire shall be confirmto IS-10322 part-5/ section-3 and shall be complete with all neccssary accessories as required.of make bajaj/havells/crompton	379
380	380	\n90/100 W LED Street light	380	4	Each
381	381	\nS.I.T.C of following rating LED FLOOD lighting with pressure dia cast housing and toughened glass cover (IP 66 protection)in existing pole/pipe /platform/periferial wall for supply voltage 100-270v AC,50Hz Luminire shall be confirmto IS-10322 part-5/ section-3 and shall be complete with all neccssary accessories as required.of make bajaj/havells/crompton	381
382	382	\n200 W LED FLOOD LIGHT\n	382	14	Each
383	383	\nProviding of Bulkhead fitting with 9/10 watt LED/ CFL of make bajaj/havells/crompton	383	6	Each
384	384	\nSupply of LED batten (10/12 watt) of make bajaj/havells/crompton	384	6	Each
385	385	\nSupply of LED batten (20/22 watt) of make bajaj/havells/crompton	385	12	Each
386	386	\nSupplying and fixing of cable junction box of make sintex	386	14	Each
387	387	\nEarthing with copper earth plate 600mmX600mmX3mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. as required. with salt charcoal or coke.	387	11	Set
388	388	\nProviding of 600 mm dia wall mounted air circulator fan heavy duty.	388	16	Each
389	389	\nSupplying & fixing of dia cast aluminium housing opel white PC diffuser IP 54 FOOT LIGHT 5 Watt LED 3000K CCT (L: 84 mm, W:297mm, H:54mm) OF MAKE Jaquar LBRK02S105XW / Bajaj/ Phillips/Havells	389	40	Each
390	390	\nSITC of Downlighter Dimmeable luminar with following specification, Light source color - Tunable white, Light source replaceable - No , Number of gear units - 2 units, Driver/power unit/transformer - Power supply unit external, Driver included - Yes , Optic type- Facetted reflector with beam angle 60°, Optical cover/lens type -Reflector ,Control interface - DALI , Protection class IEC -Safety class I , Constant light output No , RoHS mark RoHS mark, Input Voltage 220 to 240 V , Inrush current 20.4 A , Dimmable Yes , Housing Material Aluminum die cast , Reflector material Polycarbonate aluminum coated, Color White and black , Ingress protection code IP20 [ Finger-protected] , Mech. impact protection code IK03 [ 0.3 J] , Initial luminous flux (system flux) 2500 lm, Luminous flux tolerance : +/-10% , Initial LED luminaire efficacy- 185 lm/W , Initial input power -13.5 W , Maximum dim level - 1%; Preffered Make-Signify_Dynalite/Regent lighting,XAL,SLOWS	390	104	Each
391	391	\nSITC of DALI Controller for 3 DALI outputs upto 192 DALI devices including 3 x 20 A feed through Switched circuits for DALI driver main supply, should have- CE mark , RoHS mark , Ambient temperature range- 0 to +40 °C, Supply Type - Single Phase, Supply Voltage -100-240 VAC, Supply Current- 0.5 A, DyNet DC Output Voltage -12 VDC, DyNet DC Output Current -200 mA, Switched Outputs- 3 x 20 A feed-through, Supported Protocols - DyNetDMX Rx , Indicators - 1 x diagnostic LED, Ambient temperature range 0 to +40 °C . It should work with the downlighter; Preffered Make-Signify_Dynalite/Regent lighting,XAL,SLOWS	391	1	Each
392	392	\nSITC of Touch Panel for Control of the illuminace of the downlighter PABPE , should have : CE mark, Supply Voltage 12-24 VDC SELV/Class 2, Supply Current -35 mA @ 12 VDC ,20 mA @ 24 VDC , Temperature Sensor Range - 5° to 40°C (41° to 104°F) , Temperature Sensor Accuracy- ± 0.5°C (± 0.9°F) , Field Effect Detection Range -approx. 15 cm (6 in), Serial Ports -1 x RS-485 ,Supported Protocols -DyNet, Indicators- 1 x service LED, Serial Port Conductor Size- 2.5 mm2 (#12 AWG) (max); Preffered Make-Signify_Dynalite/Regent lighting,XAL,SLOWS	392	1	Each
393	393	\nSITC of Programming DyNet module for Dynalite compatibility DACM-DyNet; Preffered Make-Signify_Dynalite/Regent lighting,XAL,SLOWS	393	1	Each
394	394	\nSITC of Network Gateway for Passive integration to a PC or RS232 system and should have CE mark, RoHS mark, Ambient temperature range 0 to +40 °C, Supply Voltage- 12 VDC, Supply Current- 20 Ma, Serial Ports 2 x RS-485 1 x RS-232, Indicators 1 x DyNet power LED, Preffered Make-Signify_Dynalite/Regent lighting,XAL,SLOWS	394	1	Each
395	395	\nProgramming Charges	395	1	Each
396	396	\nS/F of wall hanging dia cast aluminium body tempered glass diffuser IP 54 MATT GREY FINISH 90 V-260 V AC (WARM WHITE) 2X3 WATT led up and down lighter OF MAKE -JAQUAR (product code - LWWLD15203XW)/ BAJAJ/ HAELLS	396	16	Each
397	397	S/F single sided LED EXIT signage with built in battry backup for 2 hours. MODELE no.BESL03LED SSD WBB GREEN/RED OF BAJAJ OR equivelant	397	10	Each
398	398	\nS.I.T.C of following rating approved make LED with rectengular / cylinderical shape of height 600 to 850mm power input 8/9 watt with dia cast aliminium housing opel with PC diffuser ,IP.65/54 protection confirming toIS 10322 part 5 etc all complete as required(excluding plinth charge) Make-Havells-LHEVBDP7IN6K008- Bamboo Bolard/ Philips-BCP150/WWPSU220-240V-7043-9W/Wipro-CRLA11008HP57-08/Bajaj-FLUTE-BGBOL605	398	10	Each
399	399	\nConstructing platform of 300 mm dia 600 mm long with 300 mm depth bellow ground and rest 300 mm exposed over ground to support Bamboo Bollard with all finishing plaster putty & paint all complite as per direction of E/I	399	10	Each
400	400	\nITC LED 25/ 90W street light on wall with 25 mm dia .75meter long GI pipe bend, J /U Hook 4 nos., along with two coat painting of GI pipe bend etc as required	400
401	401	MAIN PANEL	401
402	402	Design manufacture, supply installation, testing and commissioning of 16 SWG sheet steel fabricated cubical type floor mounting front operated construction, enclosure class - IP 52, finishing with 7 tank process and powder coating of the entire panel including covers in required shade complete with top / bottom ( as called for ) removable gland plates, cable alleys, double compression doors to achieve dust and vermin proof complete with all inter connections small wiring by copper wires, ckt labels etc. The Copper Bus Bar shall be of suitable size for 500 volts, 3 phase 50 Hz TPN, electrolytic copper as per Is 8623 insulated by heat shrinkable sleaves with surround joints. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmeter, selector switches, CT's, PT's, etc. The panels shall be got fabricated only from panel builders having 7 tank process finishing system and CPRI approved certificate for similar LT Panel.	402
403	403	LT PANEL (NORMAL SUPPLY) :35 KA) -INCOMING (1- sets ) each with following:	403
404	404	INCOMING	404
405	405	\n630A 35 KA MCCB FP Adjustable thermal seting	405	2	Each
406	406	\n630A changover FP (ON-LOAD)	406	1	Each
407	407	\n600A TPN BUSBAR(COPPER)	407	2	Each
408	408	OUTGOING	408
409	409	\n315A MCCB FP Adjustable thermal seting	409	1	Each
410	410	\n125 amps, 16 KA fixed thermal seting	410	3	Each
411	411	\n32 amps.SPN MCB	411	2	Each
412	412	\n63 amps. TPN MCB	412	10	Each
413	413	OTHER ACCESSOSRIES	413
414	414	\nDIGITAL VOLT METER 500V(3phase class 0.5)	414	1	Each
415	415	\nDIGITAL A METER 500V(3phase class 0.5)	415	1	Each
416	416	\nCOPPER WIRE 1.5MM	416	70	RMT
417	417	\nCOPPER WIRE 6MM	417	60	RMT
418	418	\nCOPPER WIRE 10MM	418	110	RMT
419	419	\nCOPPER WIRE 25MM	419	20	RMT
420	420	\nLED LAMP INDICATOR	420	6	Each
421	421	\n3 WAY 4 POLE SELECTOR SWITCH	421	2	each
422	422	\nC.T COIL OF CT ratio 1000/5 IS2705 part -3	422	6	each
423	423	\nS/F wall floor mounted cubical panel board , fabricated with 16 gauge iron sheet suitable for panel mounted switch disconnector ,incliding busbar chamber,insulator and painting etc.as required .(but without busbar copper strip)	423	36	SQF
424	424	CCTV	424
425	425	\nSupplying and fixing following size /modules G.I. box along with modular base and cover plate for modular switches in recess etc. as required	425
426	426	\n1 or 2 modules (78mmx78mmx45mm)	426	8	Each
427	427	\nProviding, drawing, fitting, fixing, connecting and testing of indoor/ outdoor 1/3\" SONY Effo E, 650 TVL OLUX ,External Adujustable IR Camera,28-12mm built-in iris lens,with 36 pcsIR LED. IR 40m, IP-66 including connections along with all standard accessories, i,e complete in all respect. Make-BOSCH. EVER FOCUS / TOSHIBA / PERITO / HIK-VISION	427	8	Each
428	428	Featues	428
429	429	1. 1/3\" Color SONY Super Had II Day & Night CCD Sensor.	429
430	430	2. Razor Sharp High Resolution: 650 TV Lines (Color)	430
431	431	3. 35 IR LED's enable vieing in total darkness up to 75 FT.	431
432	432	4. 0 Lux at IR on.	432
433	433	5. 2.8-12 EXTERNBAL adjustable Vari-focal lens.	433
434	434	6. 2DDNR (2D Digital Noise Reduction)	434
435	435	7. Weatherproof.	435
436	436	8. Compact & Light Weight .	436
437	437	9. Vandal-resistant: Polycarbonate Cover & Metal Body.	437
438	438	10. DC 12V	438
439	439	\nProviding, fitting, fixing, connecting and testing of 16 Ch. Video and audio in put, 8 SATA interfaces, 4CIF/2CIF, 6 fps/Ch,alarm,I/O 16/4 along with all standard accessories complete in all respect with required size of wall mount rack. Make- BOSCH/EVER FOCUS/ Hik- VISION/ PERITO.	439	1	Each
440	440	Key features :-	440
441	441	DS-8104/8108/8116HDI-ST Standalone DVR.	441
442	442	H.264 video compression.	442
443	443	HDMI and VGA output at up to 1920 x 1080 P resolution.	443
444	444	Dual Stream	444
445	445	4/8/16 CH Sychronous playback.	445
446	446	HDD quota and group management	446
447	447	Rear panel of DS 8116 HDI-ST Video in Audio in Video spot out Video out Audio out Line in RS 232 serial interface VGA interface HDMI interface eSATA interface LAN interface Terminal switch RS-485 serial interface, keyboard interface, alarm in, alarm out GND 100-240 VAC power input Power switch	447
448	448	\nSupply, fitting, fixing, commissioning and testing 32\" LED colour Full HD TV totally flat full HD, resolution-1920 x 1080 with 2 x HDMI, 1 x USB, remote control & battery for remote control along with all accessories & 1 year warranty. for Live View and Replay of Recorded View HD TV Make:- Make:- Sony Model: KLV-32R482B / Samsung Model: 32J5300 / LG Model: 32LF560T.	448	1	Each
449	449	\nProviding, fitting, fixing, connecting and tesing of 4 Port video switcher, cable, along with all standard accessories complete in all respect. Make-Good Local Brand.	449	1	Each
450	450	\nProviding of NAS storage 2TB internal HDD along with all standard accessories complete in all respect. Make- DLINK/SEAGATE/WESTERN-DIGITAL.	450	1	Each
451	451	\nProviding, fitting, fixing, connecting and testing of 12 V DC 10 Amp. Charger along with all standard accessories complete in all respect. Make- Good Local Brand.	451	1	Each
452	452	\nS/F PVC conduit :- supplying and fixing of following sizes PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case recessed conduit as required .	452
453	453	\n25mm	453	280	Metre
454	454	\nWiring and commisioningof 3+1 video cable and Power copper cable for entire CCTV in existing 2mm thick 25mm PVC Pipe surface/ recess with all accessosories as required..	454	300	Metre
455	455	Stage Light & Stage Craft	455
456	456	Note :- Approved make-	456
457	457	Stage Lighting Fixtures - Desisti /Canara lighting / Spotlight / ETC / Daylight / Leksa Lighting / Altman / Arri/ Modern Stage Service/ Philips-German/ Lighting Solution/ P.R. Lights/ Shollite/ Trilex-German	457
458	458	Accessories for Lighting Fixtures like C-Clamp, Safety bond & Name plates etc - Desisti /Canara lighting / Spotlight / ETC / Daylight / Leksa Lighting / Altman / Arri/ Modern Stage Service/ Philips-German/ Lighting Solution/ P.R. Lights/ Shollite/ Trilex-German	458
459	459	C-track Grid System - Stage Technologies / Waagner Biro/ Canara lighting / Daylight / Leksa Lighting/ Stage Craft	459
460	460	Power Distribution Electric Pannel - Seimens / L&T/Havells	460
461	461	Motorized Light Bar, Fixed Pipe Grid and Side Ladders - Waagner Biro /Stage Technologies / Daylight / Canara Lighting/ Leksa Lighting/ Stage Craft	461
462	462	Motorised / Fixed Curtain track system and Valance fixing arrangements - Waagner Biro /Stage Technologies / Daylight / Canara Lighting/ Leksa Lighting/ Stage Craft	462
463	463	Main Curtain Fix Rear Curtain - Om Phile/Mayur/Reymonds/Comrade	463
464	464	Wing frame - Waagner Biro /Stage Technologies / Daylight / Canara Lighting/ Leksa Lighting	464
465	465	Lighting Junction boxes - Canara Lighting / Daylight / Havells / ABB	465
466	466	DMX Signal Junction boxes - Canara Lighting / ABB/SCHNEIDER / Daylight / Leksa Lighting	466
467	467	Auxilliary Marshalling Boxes / Power Marshalling boxes - Canara Lighting / ABB/SCHNEIDER / Daylight / Leksa Lighting	467
468	468	APDCP /MCBP/MCCP/RCP/EM Trip/Patch Pannel - Canara Lighting /ABB / SCHNEIDER/ L&T / Havells/Leksa Lighting	468
469	469	Cable trays & Internal earthing system and\ninstallation hardwares - Ricco / Daylight / Canara Lighting /Leksa Lighting	469
470	470	DMX Lighting Controller & DMX Splitter - Avolites /liteputer /Zero 88 /Canara Lighting /Daylight /Leksa Lighting	470
471	471	Consumable/Accessories - Customised\n/ Daylight /Canara Lighting / Leksa Lighting	471
472	472	Fire Retardant Velvet Cloth - Nexgen / Daylight / Canara / Leksa Lighting	472
473	473	Fire Retardant Glazed Cotton Cloth - Nexgen / Daylight /Canara / Leksa Lighting	473
474	474	Plastic perforated Cyclorama Screen - Canara /JC Joel /Daylight / Leksa Lighting	474
475	475	Light Point Wiring - Walna /Havells / Polycab / KEI	475
476	476	DMX Point Wiring - Falcon /Beldon /deepcab /Canara /Leksa Lighting	476
477	477	SITC of 100W High Quality LED Zoom Parcan Light complete with, COB Lamp source 3200K CCT Colour temperature CRI & TLCI Values above 95 DmX 512 dimming with 3 channel control Beam Angle of 11 to 35 Degree Total Power Consumption of 120W High quality output replacing 1000W Halogen Par Flicker Free 100% for Tv & Film Cameras 11.7KHz Refresh Rate, Linear Dimming 0 ~ 100% Fuse and Internal safety protections Strobe option Adjustable 1~25 times/Sec Variable Fixture provided with Yoke of Manual Adjustment 5 Pin XLR or 3 Pin XLR for DmX Black powder coated body.	477	10	Nos.
478	478	SITC of 200W LED Profile Spot 19 Degree Light complete with, 3200K CCT Colour Temperature CRI & TLCI above 95 Strobe option Adjustable 1 ~ 25 times / Sec 4 Kinds of imming curves, Black finish housing Manual Focus with 4 Beam shaping cutters Efficient and well-designed Lamp reflector Efficient Copper tube based Heat Sink for Heat Dissipation Sleek and Unique Designed Light weight body Fixture provided with Yoke of Manual Adjustment DmX 512 dimming with 1 or 3 Channel modes IP20 protection having Lux @ 3 Mtrs above 9080 suitable to illuminate the key presentor or talent on stage.	478	1	Nos.
479	479	SITC of 200W LED Blinder Light 30 Degree complete with Active Cooling with Low Noise Fan 5 Pin XLR or 3 Pin XLR for DmX High quality well designed inbuilt reflector Flicker Free 100% for Tv & Film Cameras Black finish housing, IP20 protection Having Strobe option and smooth dimming illuminate Stage with uniform light intensity levels. 3200K CCT 2x100W Chip On Board LED Lamp source DmX 512 dimming with 4 /8 Channel modes CRI & TLCI Value > 90 Strobe option Adjustable 1 ~ 25 times / Sec Variable Beam Angle 30 DegreeTotal Power Consumption of 220W 11.7KHz Refresh Rate In built preset’s for effects Fuse and Internal safety protections	479	10	Nos.
480	480	SITC of 54x3W LED 3200K Par Light Beam Angle 25° complete with 3200K 3W Lamp source x 54 Pcs Having CRI TLCI Values above 95 Flicker Free for high FPS Smooth fade in and Fade out High precision steady color No heat, DmX 512 dimming with 2 Channel 0 ~ 100%, Powder coated Black finish housing\nRigidly built pressure die-casted Aluminium body LED Easy view display, Data DmX through 3 / 5 Pin XLR’s 65dB ~ 130dB Sound sensing capacity Power In and Out Connections\nTotal Power Consumption of 180W Sound Active Mode Control, IP20 protection.	480	4	Nos.
481	481	SITC of 54 x 3W LED Par Light RGBW, Beam Angle 25° complete with RGBW 3W Lamp source x 54 Pcs DmX 512 dimming with 8 Channel High Bright Red, Green, Blue, White LED’s Source Unlimited Color Mixing through DmX 0 ~ 100% Linear dimming In built presets for different colors Strobe Mode 20 times/Sec Data DmX through 3 / 5 Pin XLR’s 65dB ~ 130dB Sound sensing capacity Power In and Out Connections High precision colors, IP20 protection Powder coated Black finish housing Having Sound Control & Master Slave Auto Run Mode Illuminate the Indoor stage with unlimited colour effects Rigidly built pressure die-casted Aluminium body.	481	12	Nos.
482	482	SITC of 200W High Quality LED PC Light complete with,\n11.7KHz Refresh Rate Linear Dimming 0 ~ 100% Fuse and Internal safety protections Strobe option Adjustable 1~25 times/Sec Variable Fixture provided with Yoke of Manual Adjustment 5 Pin XLR or 3 Pin XLR for DmX Black powder coated body. COB Lamp source 3200K CCT Colour temperature CRI & TLCI Values above 95 DmX 512 dimming with 5 channel control Motorised Zoom Beam angle variable from 14 Degree to 45 Degree Total Power Consumption of 210W High quality output replacing 1000W Halogen PC Light Flicker Free 100% for Tv & Film Cameras	482	2	Nos.
483	483	SITC of Light fixture mouting clamp Customized for suspending on fixed bars on stage Made up of Aluminium Die casted MS threaded T bolt with yellow passivation finish Complete with black powder coating matt black finish. Safe working load 150 KG Suitable to Batten of size 30 OD to 60 OD	483	39	Nos.
484	484	SITC of Light Fixture dual safety Chain made up of GI wire rope\nBundled and twisted together Having load bearing capacity above 200 Kgs Sleve on the rope. Carabiner Clip	484	39	Nos.
485	485	SITC of Suspender cum clamps designed made out of MS material 150mm x 150mm x 5mm MS Base plate Threaded rod, Black powder coated finish Suitable to hold various type grid & other rigging systems.	485	30	Nos.
486	486	SITC of C Profile MS Hot rolled strips 3mm thick with Extra U bend used either to create basic supports Customized 40 x 50mmm, Makes easier to suspend all the stage machinery Duly powder coated Matt black texture finish paint\n	486	60	Mtrs
487	487	SITC of On stage Fixed Lighting Bar 17 Mtrs Length Straight as per the design Made out of 48mm Outer Dai, 40 Nominal Bore Mild Steel Pipe Dual Barrel Arrangement Dual Construction Powder coated with Matt black Texture Fixing Through Suspenders as per site conditions End Caps on the Pipe end Upper pipe of dual construction is used to anchor the bar lower pipe is effectively used to hang the light fixtures	487	3	Nos.
488	488	SITC of Fixed FOH Lighting Bar 19.5 Mtrs Length Straight as per the design Made out of 48mm Outer Dai, 40 Nominal Bore Mild Steel Pipe Dual Barrel Arrangement Dual Construction Powder coated with Matt black Texture Fixing Through Suspenders as per site conditions End Caps on the Pipe end Upper pipe of dual construction is used to anchor the bar lower pipe is effectively used to hang the light fixtures\n	488	1	Nos.
489	489	SITC of Fixed On Stage side Lighting Bar 6 Mtrs Length\nStraight as per the design Made out of 48mm Outer Dai, 40 Nominal Bore Mild Steel Pipe Dual Barrel Arrangement Dual Construction Powder coated with Matt black Texture Fixing Through Suspenders as per site conditions End Caps on the Pipe end Upper pipe of dual construction is used to anchor the bar lower pipe is effectively used to hang the light fixtures\n	489	2	Nos.
490	490	SITC of Power Distribution Electrical panel having a Incomer of 125A, floor mount / rack mount / wall mount Nuetral separation made using incomer of L&T or Schneider make, Voltmeter, Ammeter display for reading visualization Individual MCB control for 43 outgoing circuits RYB Phase indicators internally wired using IS certified wires and cables Provided with ivery connectors for the internal terminations and external outgoing connecting points Custom built as per specification and project requirement.\n	490	1	Nos.
491	491	SITC of High quality power junction box 4 way made up of MS Sheet metal fabricated housing black powder coated, fibre glands of suitable size fitted with Powercon or IEC connector Box 10A.\n	491	43	Nos.
492	492	SITC of High quality Dimming In junction box 1 way made up of MS Sheet metal fabricated housing black powder coated, fibre glands of suitable size fitted with 5 Pin DmX XLR Female socket\n	492	1	Nos.
493	493	SITC of High quality Dimming Out junction box 1 way made up of MS Sheet metal fabricated housing black powder coated, fibre glands of suitable size fitted with 5 Pin DmX XLR Male socket.\n	493	10	Nos.
494	494	SITC of Internal Earthing System with copper bare\nconductors all along the cable trays, metal parts and\nInstallation Hardwares	494	1	Nos.
495	495	SITC of Black Powder coated cable trays made out of MS Sheet fabricated for a size of 150mm with perforation for heat dessipation provided with lid.	495	20	Mtrs
496	496	SITC of Black Powder coated cable trays made out of MS Sheet fabricated for a size of 75mm with perforation for heat dessipation provided with lid.	496	120	Mtrs
497	497	SITC of DmX Male Female Connectors 5 Pin having rubber sheeth protection for Cross connecting DmX wiring connections\n	497	20	Nos.
498	498	SITC of DmX Male Termination Connector 5 Pin soldered with required capacity of resistor for signal deframing\n	498	16	Nos.
499	499	SITC of DmX Controller consits of 24 Physical Faders to control atleast 96 channels 4 Individual page control switches Master control fader Black out mode Scene saving option upto 96 memories LCD display Smooth movement faders Easy access key pads DmX 512 protocol, 5 Pin XLR Output Optional chase & multifunction keys Sequence mode select\n	499	1	Nos.
500	500	SITC of Opto isolated RDM enabled DmX splitter unit provided with, 8 Isolated outputs Slow blow safety fuse\n5 Pin XLR for output interface Dual mode to select 2 universe operation DmX Input through 5 Pin XLR Connector Powder coated compartment finish Mounting brackets for grid mount.\n	500	2	Nos.

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Jharkhand Tenders

Construction Tenders

Building Construction Tenders

Auditorium Construction Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Construction Of Auditorium And Stadium At Cts , Musabani In The District Of East Singhbhum . , Cts, Musabani-Jharkhand

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Construction Of Auditorium And Stadium At Cts , Musabani In The District Of East Singhbhum . , Cts, Musabani-Jharkhand

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us