Supply Of Consumables/Non-Consumables For The Department Of Cssd 1 Consumable Items 1.001 Surgical Gloves Size: 6.0 1.002 Surgical Gloves Size : 6.5 1.003 Surgical Gloves Size : 7.0 1.004 Surgical Gloves Size : 7.5 1.005 Surgical Gloves Size : 8.0 1.006 Sterile Examination Gloves Size: Small (5-6) 1.007 Sterile Examination Gloves Size: Medium (7-8) 1.008 Sterile Examination Gloves Size: Large (8.5- 9.5) 1.009 Unsterile Examination Gloves Size: Small (5-6) 1.01 Unsterile Examination Gloves Size: Medium (7-8) 1.011 Unsterile Examination Gloves Size: Large (8.5- 9.5) 1.012 PVC (Plastic) Glove 1.013 Reusable Rubber Gloves (utility gloves) Size: 18 1.014 Reusable Rubber Gloves (utility gloves) Size: 22 1.015 Normal Syringes: - Sterile, disposable and without needle Capacity = 1 ml (Graduation for 40 units ) 1.016 Normal Syringes: - Sterile, disposable and without needle Capacity = 20 ml 1.017 Normal Syringes: - Sterile, disposable and without needle Capacity = 50 ml 1.018 Actively Disabling Syringes without needle Capacity =2 ml 1.019 Actively Disabling Syringes without needle Capacity =5 ml 1.02 Actively Disabling Syringes without needle Capacity =10 ml 1.021 Leur-lock Syringes: Sterile, disposable and without needle Capacity =20 ml 1.022 Leur-lock Syringes: Sterile, disposable and without needle Capacity =50 ml 1.023 Needles: 16G x 1.5 1.024 Needles: 18G x 1.5 1.025 Needles: 20G x 1.5 1.026 Needles: 21G x 1.5 1.027 Needles: 22G x 1.5 1.028 Needles: 23G x 1.0 1.029 Needles: 24G x 1.0 1.03 Needles: 26G x 0.5 1.031 Infusion (IV) Set 1.032 3 ply Surgical Mask 1.033 N95/FFP2 Mask 1.034 Doctors Cap (Bouffant typ) 1.035 ICU /Medical Gown 1.036 Surgeon Gown for HIV protection 1.037 Visitors Gown: 1.038 SMS Sterilization wrapping paper sheet or polypropylene fibre (blue/green) 1.039 Disposable patient leggings 1.04 Bootleg leggings 1.041 Surgical head sweat bands 1.042 Reusable Face Shield 1.043 Puncture Proof Boot 1.044 Plastic Apron 1.045 HIV Prevention Kit: 1.046 Surgical Drapes (OT Sheet): 1.047 Paper Tape: 1.048 Disposable umbilical cord clamp 1.049 Steam Sterilizer indicator tape. Brochure to be provided 1.05 Wrapper for ETO Sterilization : Size : 7.5cm x 200 mtr. 1.051 Wrapper for ETO Sterilization : Size : 15cm x 200 mtr. 1.052 Wrapper for ETO Sterilization : Size: 20cm x 200 mtr. 1.053 Wrapper for ETO Sterilization : Size : 30cm x 200 mtr. 1.054 Wrapper for Plasma Sterilization (Low temperature hydrogen peroxide Plasma Sterilizer): Size : 3 x 70 mtr. 1.055 Wrapper for Plasma Sterilization (Low temperature hydrogen peroxide Plasma Sterilizer): Size : 6 x 70 mtr. 1.056 Wrapper for Plasma Sterilization (Low temperature hydrogen peroxide Plasma Sterilizer): Size : 10 x 70 mtr. 1.057 Wrapper for Plasma Sterilization (Low temperature hydrogen peroxide Plasma Sterilizer): Size : 20 x 70 mtr. 1.058 ETO Cartridges: 1.059 Rust Removing soak solution 1.06 Multienzyme cleaner 1.061 Instrument cleaning Brushes 1.062 General Instrument cleaning Brushes 1.063 Instrument cleaning Brushes 1.064 Instrument cleaning Brushes 1.065 Bowie-Dick steam process indicator 1.066 Biological Indicator for Steam Sterilization 1.067 Biological indicator for ETO sterilization 1.068 Biological Indicator for Plasma Sterilizer 1.069 Steam Process Indicator Strip 1.07 ETO Process Indicator Strip 1.071 Plasma Process Indicator Strip 1.072 Episotomy Scissors, 6 size. S.S. make 1.073 Episotomy Scissors, 7 size, S.S. make 1.074 Episotomy Scissors, 60 degree. Size: 6 or 7, S.S. make 1.075 Sponge Holder 6, S.S. make 1.076 Sponge Holder 7, S.S. make 1.077 Sponge Holder 9.5, S.S. make 1.078 Mosquito Artery Forceps, straight, 5, S.S. 1.079 Mosquito Artery Forceps, curved, 5, S.S. 1.08 Mosquito Artery Forceps, curved, 6, S.S. 1.081 Mosquito Artery Forceps, curved, 7, S.S. 1.082 Dissecting Forceps, Non-toothed, 5, S.S. 1.083 Dissecting Forceps, Non-toothed, 6, S.S. 1.084 Dissecting Forceps, Non-toothed, 7, S.S. 1.085 Dissecting Forceps, Toothed, 5, S.S. 1.086 Dissecting Forceps, Toothed, 6, S.S. 1.087 Dissecting Forceps, Toothed, 7, S.S. 1.088 Tetra Towel Clips, S.S. make 1.089 Cheatle Forceps, 9, SS make 1.09 Cheatle Forceps, 12, SS make 1.091 Cheatle Forceps Jar, SS make 1.092 Needle Holder, 6, SS make 1.093 Needle Holder, 7, SS make 1.094 Mayo Scissor, straight, 6 SS make 1.095 Mayo Scissor, straight, 7 SS make 1.096 Heat Resistant Gloves: 1.097 Bar coding for tracking with swiping machine with software 1.098 Thermal Printer Roll 1.099 Heating Element 1.1 Heating Element Washer 1.101 Reinforced Moulded Plastic 1.102 Syringe-cum-Needle Destroyer 2 Non-Consumable Items 2.103 Gauze/Cotton Cutting Machine: 2.104 Store Loading/Unloading Trolley: 1.001 to 1.005 Surgical Gloves: Specification: Common for Size: 6.0, 6.5, 7.0, 7.5, 8 1. Type of Surgical Glove: disposable surgical rubber gloves conforming to IS 13422(19920 powder free. 2. Sterility: sterilized., Finish of outer surface: Rough., 3. Colour: Translucent., Colour agent: No., Use: single 4. Self-life in years: 5. 5. The product should have at least 2/3 rd of the total shelf life available at the time of supply: yes. 6. STANDARDS: Conformity to Indian Pharmaopoeia for Sterility (if sterilized): Yes 7. Dimensions: Size (Number): 6, 6.5, 7, 7.5 & 8, Thickness: 0.24 millimetre 8. Material: Natural rubber Lubricant/Material used for surface treatment: Corn starch powder Powdered: No 9. Packing: Packed to maintain sterility during shipping & storage and permit opening without contamination of the gloves: YES 10. No. of gloves in a pack: 2 Nos. (1 pair) 11. ISI marked: YES CM/L No.: 6105044 12. REPORTS: Submission of test reports on Form 39 or from Central Govt./NABL/IL AC accredited Lab to prove conformity to the specifications at the time of supply 1.006 to 1.008 Sterile Examination Gloves Specification: - Size: Small (5-6), Medium (7-8) Large (8.5-9.5) 1. Type of material: Synthetic Latex/ Compound natural. 2. Powder free: yes. 3. Packing for gloves: Individual packing for sterilized gloves. 4. Sterility: sterile. 5. Multi units in one packet (Number) 50 or 100. 6. Certification: ISO certified IS:15354. 7. ISI marked: Yes. 8. Submission of test report to the buyer from NABL/ILAC accredited or Central Govt. Lab to prove conformity of products to the specification on demand to the buyer: Yes 1.009 to 1.011 Unsterile Examination Gloves Specification: - Size: Small (5-6), Medium (7- 8) & Large (8.5- 9.5) 1. Type of material: Synthetic Latex/Compound Natural. 2. Powder free: No., Sterility: Unsterile., Multi units in one packet (Number): 100., Certification ISO certified IS: 15354. 3. ISI marked: Yes 1.012 PVC (Plastic) Glove Specifications: - 1. Disposable PVC (plastic) gloves of 45 G thickness. 2. Transparent, Universal fitting size, soft & flexible, latex free, powder free. 1.013 to 1.014 Reusable Rubber Gloves (utility gloves) Specifications: - Size: 18 & 22” 1. Length - 45 cm (long length) Colour - Red / Green / Orange. 2. Non-slip grip on palm Rolled Cuffs General Chemical Resistant. 1.015 to 1.017 Normal Syringes: - Sterile, disposable and without needle. 1. Capacity = 1 ml (Graduation for 40 units). 2. Capacity = 20 ml. 1.018 1.020 Actively Disabling Syringes without needle Specifications: - Capacity =2 ML, 5 ML & 10 ML 1. Sterile, disposable and without needle. 2. Actively disabling - RUP Syringe with Reuse prevention feature. 3. Actively disabling Reuse prevention feature, permanently disable by user after completion of intended use even after multiple plunger movements to prevent subsequent reuse of the syringe, equivalent to ISO 7864, type 2-B. 1.021 1.022 Leur-lock Syringes: Specification: Capacity =20 ML & 50 ML Sterile, disposable and without needle 1.023 1.030 Needles Specifications: - Size: 16G x 1.5, 18G x 1.5, 20G x 1.5, 21G x 1.5, 22G x 1.5, 23G x 1.0, 24G x 1.0 & 26G x 0.5 1. Sterile disposable hypodermic needles. 2. Should be of good quality material and pack without any risk of breach in sterility. ETO/Gamma Sterilized. 1.031 Infusion (IV) Set Specifications: - Sterile, disposable, with air vent and a regulator. (Non-toxic, pyrogen free; non-kinking quality; Pack without any risk of breach in sterility, ETO/ Gamma sterilized. ISO certified. 1.032 3 ply Surgical Mask Specifications: 1. ISO certified: yes 2. Fabric material: Non-woven fabric with middle polyfibre layer. 3. GSM of the fabric (G/m2): 60-70. 4. Pleated construction of Mask: to provide adjustable and leakproof fitting. 5. No. of layers of plies of fabric: 3 layers. 6. Bacterial filtration efficiency (BFE%): >=99. 7. Splash resistant: Yes. 8. Breathing resistance (mm of H2O/cm2): <=5 (splash resistant) 9. Securing loops: Tie., Adjustable flexible nose clip: with. 10. Colour: any., Length: 17 - 18cm., Width: 9 - 10cm 11. Submission of Test Report to the buyer on demand from NABL/ILAC accredited or Central Govt. Lab to prove conformity of products to the specification: Yes. 12. Certification: ISI 1.033 N95/FFP2 Mask Specifications: 1. A particulate respirator with filtration efficient of 94% or more against particulate aerosols > 0.3μm 2. It should be disposable and be able to fit for wide range of face sizes. It would be preferable to come in various sizes (not compulsory) 3. The nose clip should be adjustable to allow moulding to fit on the nose. It would be preferable to have a foam on the inner surface to allow good fit on the nose. 4. Ultrasonically/ thermal/ stapled welded head bands (adjustable preferred) and should be fitted robustly. 5. Should meet the NIOSH 42 CFR84 N95 standards or FFP2 (Europe N149-2001) standards certified by appropriate labs. 6. The mask should not have a valve and either be a flat fold or cup shaped. 1.034 Doctors Cap (Bouffant type) Specifications: - 1. Size: 18-21 inch 2. Type of material: Non-woven breathable. 3. Design: Bouffant type. 4. Composition of nonwoven material: spun-bond non-woven. 5. GSM of Cap material: 20gm/sq. mtrs. 6. Well fitted with double elastic or string: Yes. 7. Properly ultrasonically sealed for uniformity: Yes. 8. Colour: Any. 9. Bacterial filtration: Yes. 10. Air permeable: Yes. 11. Certification: ISO certified. 12. Submission of Test Report to the buyer from NABL/ILAC accredited or Central Govt. lab to prove conformity of products to the specification on demand to the buyer: Yes 1.035 ICU /Medical Gown Specifications: - Gown type: ICU gown., Colour: Medical blue. Disposable: Yes., Breathable: Yes. antistatic properties: yes., Impervious to fluids: Yes., Reinforced: No., Sterilized: Yes., Method of sterilization: ETO., Gown width: 73cm., Gown length: 125cm. No. of belts to tie: 2 pair., Length of each tying belts stitched: 100cm. Width of tying belt: 3cm., Gown type: Surgeon gown., Colour: Medical blue., Disposable: Yes., Breathable: Yes., Antistatic properties: yes., Impervious to fluids: yes., Reinforced: No., Sterilized: yes., Method of Sterilization: ETO., Material used for gown: Non-woven, spun bond. Composition of non-woven reinforced material: spun bond + poly coated. Reinforced critical zones (front and sleeve up to elbows) to provide 100% protection against any amount of fluid: NA., GSM of non-woven fabric: 40 g/m2., Alcohol repellent material: Yes. Closing at neck: NA., Pair of disposable absorbent hand wipes: No., Sleve type: Full sleeve. Cuff end: With knitted cuff of at least 10cm width., Wrap around type: Yes. Type of packing: Sterile pack, pouch must be peel off made of medical grade paper. AAMI protection level: Level III., Certification: ISO certified. Submission of test report clearly specifying the nomenclature of fabric, method of sterilization and AAMI protection level in addition to other parameter to the buyer on form 39 or from NABL/ILAC accredited or Central Govt. lab to prove conformity certificate to be furnished to buyer at the time of supply: Yes Surgeon Gown for HIV protection Specifications: - Gown type: surgeon gown for HIV protection., Colour: Medical blue / green / violet., Disposable: Yes., Breathable: Yes., Antistatic properties: yes., Impervious to fluids: Yes., Reinforced: yes., Sterilized: Yes., Method of sterilization: ETO., Gown width: 100cm - 125cm., Gown length: 195cm - 200cm., No. of belts to tie: 4 pairs., Length of each tying belt stitched: 150cm - 160cm., Width of tying belt: 5cm., Material used for gown: Non-woven SMS., Composition of non-woven reinforced material: SMS + Poly coated., Reincorced critical zones (front and sleeve up to elbows) to provide 100% protection against any amount of fluid: Yes., GSM of non-woven fabric: 68g/m2 and above., Closing at neck: Hook and loop / velcro fastener with piping of non-woven material stitched to raw edges of neck opening extending at both ends for tying., Pair of disposable absorbent hand wipes: Yes., Sleeve type: Raglan sleeve, full sleeve., Cuff end: With knitted cuff of at least 10cm width., Wrap around type: No., Type of packing: Sterile pack, must be double packed with outer pouch must be peel off made of medical grade paper., type wrapping: Set in sleeve., AAMI Protection level: Level IV. Certification: ISO 13485:2016., Submission of test report clearly specifying the nomenclature of fabric, method of sterilization an AAMI protection level in addition to other parameter to the buyer on form 39 or from NABL/ILAC accredited or Central Govt. Lab to prove conformity of products to the specification., Product conformity certificate to be furnished to buyer at the time of supply: Yes Visitors Gown: Disposable, free size, made from non-woven fabric, maintenance free, ISO-CE standards SMS Sterilization wrapping paper sheet or polypropylene fibre (blue/green) Specifications: Size: 100cm x 100cm, non-woven, bacterial barrier, single use, light weight, wet penetration resistant. Disposable patient leggings Specifications: knee length size, Polycoated, laminated, non-woven with tiable hem, impervious, stretchable Bootleg leggings Specifications: - Colour: any., Skid resistance: Yes., Dust proof: Yes., Well stitched in universal regular size: Yes., Should cover the ankles: Yes., Hard elasticized for better grip and easy wear: Yes., Disposable: Yes Sterile: No., Packing: Pair individually packed., Shoe size (UK) for which item is suitable: 9 or 10., Clear indication of size on disposable shoe cover: Yes., Material (Non-toxic, medical grade): Non-woven thick fabric., Composition of non-woven material: Spun bond + Non-woven., GSM of Non-Woven material: 40 g/sq./mtrs., Certification: ISO., Submission of Test Report to the buyer on demand from NABL/ILAC accredited or Central Govt. Lab to prove conformity of products to the specification on demand to the buyer: Yes Surgical Head Sweat Bands Specifications: - Washable, latex free, 2.5 x 8 inches wide with soft broad (1 inch) elastic / ties to prevent slippage Reusable Face Shield Specifications: - The transparent front part of the face shield should be optically clear and should not produce visual distortions at the centre or the sides. Thickness of transparent sheet should be a minimum of 2mm and above. The transparent from part should be made out of unbreakable material like polycarbonate that will not create splinters on impact. Transparent front part should have a hinge mechanism (preferable) to manually raise it over the head if required but should not vibrate or wobble even with quick head movements. All materials should be compatible with a wipe (or spray) disinfection with alcohol (Ethyl alcohol, 2 propanol, 1 propanol combinations) or a 1% hypochlorite solution. wiping with a soft cloth or timmue paper should not cause scratches. The transparent part should have a gap of at least five cm from the forehead and about 7 cm from the nose so that it remains free of contact with an N95 mask and any vapor generated while respiring does not fog the transparent shield. The pransparent part should give protection to splashed to the eyes and should extend about 5cm behind the outer edge of the eye but not cover the ears. It should also extend below the jaw for about 5cm but should not hinder neck movements when the head is flexed maximally. The frame that fits on the head should not have sponges that can absorb and retain sweat or cleaning agents. The frame that fits on the head and forehead should have padding that is soft on the scalp and forehead. The entire weight of the face shield should not exceed 250gm. The frame that fits on the head should have a mechanism for adjusting to the users head circumference (preferable) so that it does not slip down this mechanism should not be based on hook and loop (Velcro) patches that accumulate lint and are difficult to clean. Puncture Proof Boot Specification: Puncture Proof, good grip. Plastic Apron Specifications: - Width of apron : 57 - 65 cm., Length of apron: 90 - 100cm., Material of apron: Poly coated non-woven., GSM of apron material: 100gm per sq. mtrs., Thickness: 50 micron and above, Neck and arm hole cut: Yes., Edges stitched with piping of suitable material: yes., Loop of suitable material at neck for supporting apron: yes., Four straps (Two pairs) of suitable material to secure the apron: Yes., Colour: any., Certification: ISO, CE certified., Submission of test report to the buyer on Form 39 or NaBL/ILAC accredited or Central Govt. Lab to prove conformity of products to the specification on demand: Yes,. Disposable: Yes., Sterile: Yes., Packing: Individually packed separately. HIV Prevention Kit: Specifications: Sterile and disposable., N-95 Mask as specified in Sl.No.1.033., Astronaut type cap of non-woven material 49-53 gsm., Wide Goggle preferably fixed in the head protection hood. Surgeon Gown as specified in Sl. No.1.036. Shoe Cover - with long leg covers to reach on to the mid leg region - with elastic fittings., Waste carry bag of adequate size. 1.046 Surgical Drapes (OT Sheet): Sterile disposable surgical drapes (OT sheet), non-woven material - 100 x 100 cm with opening of 14 x 18 cm in the centre with adhesive borders. 1.047 Paper Tape: Adhesive latex free hypoallergenic paper tape - 2.5 cm x 9 m 1.048 Disposable Umbilical Cord Clamp Specifications: Single use packed Sterile, ETO sterilized. Polyoxymethylene copolymer/plastic material Interlocking teeth for security lock with a click reopening or slipping when clamped Smooth Edges 5-6 cm long, width 1-1.5 cm when closed 1.049 Steam Sterilizer indicator tape. Brochure to be provided 1.050 to 1.053 Wrapper for ETO Sterilization Specification: Size: 7.5cm x 200 mtrs, 15cm x 200 mtrs, 20cm x 200 mtrs, 30cm x 200 mtrs, Medical grade sheet flash spun and bonded high-density polyethylene (HDPE) covers for ETO Sterilization with inbuilt indicator with resistance to microbial penetration, tear strength, puncture resistance and clean peel. ISO certified. Brochure to be provided. 1.054 to 1.057 Wrapper for Plasma Sterilization (Low temperature hydrogen peroxide Plasma Sterilizer): Specification: Size: 3 x 70 mtrs, 6 x 70 mtrs, 10 x 70 mtrs, 20 x 70 mtrs. Medical grade sheet, should be made of high-density polyethylene (HDPE) and allows for an effective sterilant concentration to be achieved in low temperature hydrogen peroxide gas sterilization to sterilization of heat liable devices. Sterilization with inbuilt indicator with resistance to microbial penetration, tear strength, puncture resistance and clean peel. ISO certified. Brochure to be provided. 1.058 ETO Cartridges: Cartridge containing 200gm of 100% ethylene oxide gas, for use in Ethylene Oxide Sterilizer (Capacity: 452 litres). ISO Certified. Brochure to be provided. 1.059 Rust Removing soak solution - nontoxic, biodegradable, water soluble, non-corrosive, non-flammable. Capacity 1 litre 1.06 Multienzyme cleaner Specifications: - Rapid multienzyme cleaner solution for automatic washers containing protease, amylase, lipase, cellulose compatible with stainless steel steel surgical instruments, non-corrosive, neutral PH fastracting, stable, disposable by normal plumbing. Bacteriostatic, low foaming, effective in temperature range of 40-80 °C. 1 litre capacity 1.061 Instrument cleaning Brushes - Tooth brush style, plastic handle, 7-10 inches long, polypropylene bristles, single ended, three rows 1.062 General Instrument cleaning Brushes around 7-10 inches long, Stainless Steel Brushes 1.063 Instrument cleaning Brushes - Tooth brush style, plastic handle, stainless steel bristels, single ended , one row Instrument cleaning Brushes - Tooth brush style, double header, 7-10 inches, Bowie-Dick steam process indicator Specifications: - Disposable single use pack, lead and heavy metal free, ability to preserve indicator sheet for permanent record. Stable colour, colour change is not reversible, indicator ink will not fade in storage or under fluorescent light. Add each pack to have lot numbers and expiry date and a uniform contrast colour change. Brochure to be provided Biological Indicator for Steam Sterilization Specifications: - Geobacillus Stearothermophilus 10 log - ISO and european standard certified Biological test pack with auto readers for steam sterilizer, smart read, rapid read out, self-contained Stable colour, colour change is not reversible, indicator ink will not fade in storage or under fluourescent light. Brochure to be provided Biological indicator for ETO sterilization Specifications: - Bacillus atrophaeus 10 log in self-contained rapid read out disposable units, Stable colour, colour change is not reversible, indicator ink will not fade storage or under fluorescent light. Brochure to be provided Biological Indicator for Plasma Sterilizer Specifications: - Self-contained, rapid read out for plasma sterilizer, disposable G. Stearothermophilus 10 containing glass fibre disc borated in a plastic tube with biological fibre. The plastic tube should have chemical indicator. Brochure be provided Steam Process Indicator Strip Specification: ISO-11140-1: 2005 certified Class V Steam Sterilizer. Single use strips for steam sterilizer. 121°C at 20 minutes, stable colour, colour change is not reversible, indicator ink will not fade in storage or under fluorescent light. should have Reject and Accept regions. Brochure to be provided ETO Process Indicator Strip Specification: - ISO 11140-1 certified. Stable colour, colour change is not reversible, indicator ink will not fade in storage or under fluorescent light Plasma Process Indicator Strip Specifications: Multicritical proven variable Indicator - plasma indicator, single strip dosimeter. Stable colour, coulour change is not reversible, indicator will not face in storage or under fluorescent light 1.072 10.73 Episotomy Scissors, Specification: size: 6& 7”, S.S. make Episotomy Scissors, 60 degree. Size: 6 or 7, S.S. make 1.075 1.077 Sponge Holder Specification: Size: 6, 7”& 9.5”, S.S. make Mosquito Artery Forceps, straight, 5, S.S. Tetra Towel Clips, S.S. make 1.080 1.081 Cheatle Forceps, Specification: 9& 12”, SS make Cheatle Forceps Jar, SS make 1.083 1.084 Needle Holder, Specification: Size: 6&7”, SS make 1.085 to 1.086 Mayo Scissor, straight, 6 & 7 SS make 1.087 Heat Resistant Gloves: Long (till upper arm), resistant to high temperature made of insulated fabric /leather / heat resistant and preserved material, smooth finish with good hand grip and full fingered, large size (24 inches) 1.088 Bar coding for tracking with swiping machine with software 1.089 Thermal Printer Roll, compatible for use in Ethylene Oxide Sterilizer (capacity : 452 litres). Size : 2.3 x 10 mtr. Roll 1.09 Heating Element, 6Kw capacity, compatible for use in microprocessor controlled, high pressure, fully automatic, 36KW, double door Steam Sterilizer. 1.091 Heating Element Washer, compatible for use in microprocessor controlled, high pressure, fully automatic, 36KW, double door Steam Sterilizer, functioning in CSSD, JIPMER. 1.092 Reinforced Moulded Plastic Pallets of Size: 1200length x 800breadth x 145height mm. Capacity : 1000 kg unified load (Static) of weight 11 kgs. Colour : Blue. 3 years warranty 1.093 Syringe-cum-Needle Destroyer 2 Non-Consumable Items 2.01 Gauze/Cotton Cutting Machine: (Automatic straight knife gauze/cotton cutting machine) Specifications: 1) Blade size: 8and above. 2) Motor Speed: 2800 RPM and above 3) Power supply: 22/110V, 50/60Hz, 600w. 4) Machine supposed to cut 15cm gauze cotton material. 5) Demo at JIPMER premises must for selection. 6) 2 Years warranty 2.02 Store Loading/Unloading Trolley: Specifications: 1) Make: Stainless Steel 2) Size of plateform: 5ft (length) x 3 ft(breadth) 3) Loading Capacity: 300kg and above 4) No. of wheels required: 4 nos. 5) Type of Wheel : Heavy duty ball bearing castor wheels
