Indo Tibetan Border Police Force-ITBP has published Construction Of Jawan Barrack At T.C. Tato Of 20Th Bn. Submission Date for this Tender is 03-06-2021. Barrack Tenders in T.C. Tato of 20th Bn. I.T.B. Police (A.P) Arunachal Pradesh. Bidders can get complete Tender details and download the document.
| Name of Work: < C/O Jawan Barrack at T.C. Tato of 20th Bn. > | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Name of Work:- C/O Jawan Barrack at T.C. Tato of 20th Bn. | |||
| 2 | 1.01 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. | item1 | 83.32 | Cum |
| 3 | 1.02 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | item2 | 35.4 | Cum |
| 4 | 1.03 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | item3 | 13.25 | Cum |
| 5 | 1.04 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size) | item4 | 16.72 | Cum |
| 6 | 1.05 | Providing and fixing up to floor five level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete :1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) . | item5 | 21.11 | Cum |
| 7 | 1.06 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers | item6 | 70.11 | Sqm |
| 8 | 1.07 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | item7 | 47 | Cum |
| 9 | 1.08 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Mild steel and Medium Tensile steel bars | item8 | 19 | Qtl |
| 10 | 1.09 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Kiln seasoned and chemically treated hollock wood | item9 | 0.41 | Cum |
| 11 | 1.1 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately 40 mm thick shutters | item10 | 21.85 | Sqm |
| 12 | 1.11 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings /wooden frames with rawl plugs screws etc. | item11 | 37 | Kg |
| 13 | 1.12 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm | item12 | 8 | Nos |
| 14 | 1.13 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete----250x10 mm | item14 | 10 | Nos |
| 15 | 1.14 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete----100x10 mm | item15 | 16 | Nos |
| 16 | 1.15 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) | item16 | 251.47 | Sqm |
| 17 | 1.16 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat | item17 | 117.76 | Sqm |
| 18 | 1.17 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | item18 | 132.63 | Sqm |
| 19 | 1.18 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work | item19 | 21.72 | Sqm |
| 20 | 1.19 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate | item20 | 99.42 | Sqm |
| 21 | 1.2 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | item21 | 2 | Nos |
| 22 | 1.21 | Providing and fixing soil, waste and vent pipes :100 mm dia Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 | item22 | 8 | Mtr |
| 23 | 1.22 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 15 mm dia nominal bore | item23 | 9 | Mtr |
| 24 | 1.23 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore | item24 | 2 | Nos |
| 25 | 1.24 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore | item25 | 1 | Nos |
| 26 | 1.25 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | item26 | 500 | Ltr |
| 27 | 1.26 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.---(Group A) | item28 | 13 | Point |
| 28 | 1.27 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required-----(.Group B) | item29 | 8 | Point |
| 29 | 1.28 | Copper circuit/submain wiring in PVC condute (PVC condute shell be of suprime brand )wiring for submain wiring with 2x2.5mm² FRLS PVC insulated copper conductor, single core cable make L&T/Rallison/havells in recessed steel conduit as required with specifications like maximum 4 nos of wires in one conduit of 20 mm dia, green/yellow insulated copper earth wire to come to switch box, black insulated copper wire for nutral also to come to switch box and for one core cable red PVC inculated copper wire should be used where as two core cable red and blue PVC copper wire to be used, steel conduit should be fixed with respective size of Intello Tech support clamp of chilly fixed with screw of make Nettle fold/Amul/Magnum | item30 | 36 | Mtr |
| 30 | 1.29 | Supplying , Installation, Testing and commissioning of celling fan 48" including wiring the down rod of standered length (up to 30 cm ) with 1.5 sqmm FR PVC insulated copper conductor of brand national/ kalinga/ Hacells/Skytone | item31 | 4 | Nos |
| 31 | 1.3 | Supplying, Installation, Testing and commissioning of prewired flourescent fitting 1x40 watt 4' long brand philips, crompton, Bajaj of all types complete with all accessories and tube etc directly on celling/wall including connection with 1.5sqmm FR PVC inculated copper conductor of brand national/ Kalinga/ Hacells/ Skytone | item32 | 11 | Nos |
| 32 | 1.31 | Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. Of brand Havells, Indocopp, standered, L&T, 40 amps | item33 | 1 | Nos |
| 33 | 1.32 | Supplying and fixing 5 amps to 32 amps rating, 240 volts, “B” series miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Of brand Havells, Indocopp, standered, L&T | item34 | 4 | Nos |
| 34 | 1.33 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. Fan regulator make of Anchor/bajaj/Havells /Standard | item35 | 4 | Nos |
| 35 | 1.34 | Providing and laying of one no XLPE insulated and PVC sheathed armoured hard drawn aluminum conductor 1100 colt two core cable confirming to IS 7098 (Part-1) nominal cross sectional area 16 mm² | item36 | 18 | Mtr |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
