| 1 | 1 | Formation of sand bund on both side of shutters as per the direction of departmental officers at site | BI01010001010000000000000515BI0100001113 | | |
|---|
| 2 | 1.01 | Providing needle shutter support with ISMC 200 x 75, ISMC 100 x 50 and MS Flat 6 x 100 mm on either extremities of each shutter bay including 1/6 th cost of MS materials and conveying charges, and Putting up Bund as per approved shape 6m bottom width, 3m top width using empty gunny/polythene bag filled with earth placed in two rows 1.2m apart and filled in between with puddle clay to form bund for an average height of 3.5m including all charges for dismantling the bund after completion of work as directed by departmental officers at site. | BI01010001010000000000000515BI0100001114 | 720 | metre |
|---|
| 3 | 2 | BAILING OUT WATER USING PUMP ABOVE 10HP AND UP TO 20HP - Bailing out water with engine and pump set above 10HP and up to 20HP, including conveyance to site and erection,cost of fuel, lubrication oil and other stores, pay of staff etc complete | BI01010001010000000000000515BI0100001115 | | |
|---|
| 4 | 2.01 | BAILING OUT WATER USING PUMP ABOVE 10HP AND UP TO 20HP - Bailing out water with engine and pump set above 10HP and up to 20HP, including conveyance to site and erection,cost of fuel, lubrication oil and other stores, pay of staff etc complete | BI01010001010000000000000515BI0100001116 | 1440 | hour |
|---|
| 5 | 3 | Dismantling Hoisting units,taking out from the pier top and Loading in trailor,Taking out shutters from the groove and loading in trailer and stacking in safe place as directed by Deparmental officers at site | BI01010001010000000000000515BI0100001117 | | |
|---|
| 6 | 3.01 | Dismantling Hoisting units, taking out from the pier top and Loading in trailer, Then taking out shutter from the groove and loading in trailer and stacking safely in safe place up to 200 mtrs as directed by Departmental officers at site | BI01010001010000000000000515BI0100001118 | 40 | set |
|---|
| 7 | 4 | Supply of MS Materials for fabrication and fixing the Corner Angle | BI01010001010000000000000515BI0100001119 | | |
|---|
| 8 | 4.01 | Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges | BI01010001010000000000000515BI0100001120 | 37632 | kg |
|---|
| 9 | 4.02 | Providing and fixing special type Anchor bolts M12 X 100 mm L with 16mm OD X 80 mm L Sleeve including Drilling hole. | BI01010001010000000000000515BI0100001121 | 6560 | no |
|---|
| 10 | 4.03 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1/2:3 (cement : 11/2 coarse sand : 3 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001122 | 56.4 | cum |
|---|
| 11 | 5 | Fabrication, erection and commissioning of Corner Angle in IS2062 Grade and accessories as per existing specifications | BI01010001010000000000000515BI0100001123 | | |
|---|
| 12 | 5.01 | Fabrication, erection and commissioning of Corner Angle in IS2062 Grade and accessories as per existing specifications, and directions of deptl officer at site including cost of labour , machinery , incidental and handling charges etc complete but excluding cost of material already supplied | BI01010001010000000000000515BI0100001124 | 37632 | kg |
|---|
| 13 | 6 | Conveying Shutter and Hoisting units, to grooves and erecting the shutter in grooves properly and safely then erecting the Hoisting unit on the top of pier correctly and safely as directed by Departmental officers at site | BI01010001010000000000000515BI0100001125 | | |
|---|
| 14 | 6.01 | Conveying Shutter and Hoisting units, to grooves and erecting the shutter in grooves properly and safely then erecting the Hoisting unit on the top of pier correctly and safely as directed by Departmental officers at site | BI01010001010000000000000515BI0100001126 | 40 | set |
|---|
| 15 | 7 | Supplying and fixing in correct position with specified initial interface the rubber seal confirming to IS11855 to the Vertical sides of shutters | BI01010001010000000000000515BI0100001127 | | |
|---|
| 16 | 7.01 | Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings | BI01010001010000000000000515BI0100001128 | 232 | metre |
|---|
| 17 | 8 | Supply of Materials for replacing the damaged items for smooth operation of Shutters | BI01010001010000000000000515BI0100001129 | | |
|---|
| 18 | 8.01 | Cost of supplying and stacking including conveyance charge of 22 mm tested stainless steel wire rope 6/36 construction, fiber core, confirming to IS2266-1989 | BI01010001010000000000000515BI0100001130 | 160 | metre |
|---|
| 19 | 8.02 | Supply of 5T capacity Stainless Steel D Shackle | BI01010001010000000000000515BI0100001131 | 80 | no |
|---|
| 20 | 8.03 | Supply of Stainless steel wire rope clamp | BI01010001010000000000000515BI0100001132 | 240 | no |
|---|
| 21 | 8.04 | Supply of 22 mm Stainless Steel thimble. | BI01010001010000000000000515BI0100001133 | 80 | no |
|---|
| 22 | 9 | Labour charge for aligning the shutter in the grooves and Hoist unit and fixing wire rope contacting trial operation and applying grease etc complete as directed by the departmental officers at site | BI01010001010000000000000515BI0100001134 | | |
|---|
| 23 | 9.01 | Labour charge for aligning the shutter in the grooves and Hoist unit and fixing wire rope contacting trial operation and applying grease etc complete as directed by the departmental officers at site | BI01010001010000000000000515BI0100001135 | 40 | set |
|---|
