Public Works Department-PWD has published Construction Of Warehouse For The Storage Of Evms And Vvpats At Dhalpur Tehsil And District Kullu H . P . Sh Construction Of Building Portion , Water Supply And Sanitary Installation And Rain Water Harvesting System . . Submission Date for this Tender is 31-05-2021. Building Work Tenders in Kullu Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Name of Work: -Construction of Warehouse for the storage of EVMs and VVPATs at Dhalpur Tehsil and Distt Kullu (H.P.) (SH:- Construction of building portion, Water supply & Sanitary installation and rain water harvesting system). | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Excavation in foundation, trenches etc. in earth work in all kinds of soil such as pick work, Jumper work, blasting work in soft and hard rock, conglomerated rock or saturated soil and its intermediate classification of soil, chieseling/wedging out of rock (where blasting is prohibited) and pumping or bailing out watering/dewatering upto any lift, stacking the excavated soil clear from the edge of excavation and then returning the stacked soil in layer when required into plinth, sides of foundation consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed by Engineer-in-Charge within all any leads including carriage of materials with in all leads, lifts and other incidentals. | BI01010001010000000000000515BI0100001113 | 567.06 | Per Cubic metre |
| 2 | 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering . All work up to plinth level 1:5:10 (One cement : five sand : ten graded stone aggregate 40 mm (Forty millimeter) nominal size) within all leads and lift including carriage of material in all respect and as per direction of Engineer-in- charge. | BI01010001010000000000000515BI0100001114 | 35.69 | Per Cubic metre |
| 3 | 3 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (One cement : six coarse sand : twelve graded stone aggregate 20 mm(Twenty millimetre) nominal size) upto any level with Cement mortar 1:6 (One cement : Six coarse sand) within all leads and lift including carriage of material in all respect and as per direction of Engineer-in- charge. | BI01010001010000000000000515BI0100001115 | 117.54 | Per Cubic metre |
| 4 | 4 | Centering and shuttering including strutting, propping etc. and removal of form for within all leads and lift including carriage of material in all respect and as per direction of Engineer-in- charge. i) Foundations, footings, bases of columns, etc. for mass concrete | BI01010001010000000000000515BI0100001117 | 107.84 | Per Square metre |
| 5 | 5 | ii) Columns, Pillars, Piers, Abutments, Posts and Struts | BI01010001010000000000000515BI0100001118 | 410.4 | Per Square metre |
| 6 | 6 | iii)Suspended floors, roofs, landings, balconies and access platform | BI01010001010000000000000515BI0100001119 | 1639.21 | Per Square metre |
| 7 | 7 | iv) Lintels, beams, plinth beams, girders, bressumers and cantilevers | BI01010001010000000000000515BI0100001120 | 670.04 | Per Square metre |
| 8 | 8 | v) Stairs, (excluding landings) except spiral stair cases. | BI01010001010000000000000515BI0100001121 | 147 | Per Square metre |
| 9 | 9 | vi) Edges of slabs and breaks in floors & walls Under 20 cm. (twenty centimetre ) wide. | BI01010001010000000000000515BI0100001122 | 350 | Per Running metre |
| 10 | 10 | vii) Vertical surface such Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. | BI01010001010000000000000515BI0100001123 | 10.14 | Per Square metre |
| 11 | 11 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge All works upto plinth level within all leads and lift including carriage of material in all respect and as per direction of Engineer-in- charge. | BI01010001010000000000000515BI0100001124 | 100.2 | Per Cubic metre |
| 12 | 12 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge All works above plinth level to floor all level within all leads and lift including carriage of material in all respect and as per direction of Engineer-in- charge. | BI01010001010000000000000515BI0100001125 | 361.68 | Per Cubic metre |
| 13 | 13 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering in cement concrete 1:4:8 (One Cement : four coarse sand) : eight graded stone aggregate 40 mm (Forty millimetetre nominal size) within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001127 | 57.33 | Per Cubic metre |
| 14 | 14 | Cement concrete flooring 1:2:4 (One cement : two coarse sand : four graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete 40 mm(Forty millimetre) thick with 20 mm (Twenty millimetre ) nominal size stone aggregate within all leads and lift including carriage of material in all respect and as per direction of Engineer-in- charge. | BI01010001010000000000000515BI0100001128 | 206.4 | Per Square metre |
| 15 | 15 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor any level, excluding the cost of centering, shuttering and finishing 1:1½:3 (One cement : 1.5(One point five zero) coarse sand) : three graded stone aggregate 20 mm(Twenty millimetre) nominal size) within all leads and lift including carriage of material in all respect and as per direction of Engineer-in- charge. | BI01010001010000000000000515BI0100001129 | 1.18 | Per Cubic metre |
| 16 | 16 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all inclouding cost of binding wire complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001130 | 71097.8 | Per Kilogram |
| 17 | 17 | Providing and laying damp-proof course 50mm(Fifty millimeter) thick with cement concrete 1:2:4 (One cement : two coarse sand) : four graded stone aggregate 20mm(twenty millimetre) nominal size) within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001131 | 44.06 | Per Square metre |
| 18 | 18 | Brick work 23cm (thirty centimetre ) thick brick masonry in rat trap bond with common burnt clay F.P.S.(Non modular) bricks of class designation 7.5 in super structure above plinth level upto floor all level in all shapes and sizes in cement mortar 1:6(One cement : six coarse sand ) as per direction of Engineer-in-charge within all leads and lift including carriage of material in all respect and as per direction of Engineer-in- charge. | BI01010001010000000000000515BI0100001132 | 231.35 | Per Cubic metre |
| 19 | 19 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Seven point five ) in superstructure above plinth level up to floor all level Cement mortar 1:3 (One cement :three coarse sand) within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001133 | 136.18 | Per Square metre |
| 20 | 20 | Providing and fixing wooden laminated flooring made in superior water resistant high density hard wood fibre board 8mm (Eight millimetre ) thick make action tesa with all accessories complete within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001134 | 28.15 | Per Square metre |
| 21 | 21 | Providing and laying Full body vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm(Twenty millimetre ) thick cement mortar 1:4 (One cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three kilogram/square metre) (including grouting the joints with white cement and matching pigments etc., size of tile 600x 600mm (Six hundred x six hundred millimetre ) within all leads and lift including carriage of material in all respect and as per direction of Engineer-in- charge. | BI01010001010000000000000515BI0100001137 | 970.67 | Per Square metre |
| 22 | 22 | Providing and laying Full body Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S.15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm(Twelve millimetre ) thick bed of cement mortar 1:3 (One cement: three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm. (Three point three kilogram/square metre) including grouting the joint with white cement & matching pigments etc. complete size of tile 600x 600mm (Six hundred x six hundred millimetre ) within all leads and lift including carriage of material in all respect and as per direction of Engineer-in- charge. | BI01010001010000000000000515BI0100001138 | 89.1 | Per Square metre |
| 23 | 23 | Providing and laying full body vitrified floor tiles out of single piece tread 30x150cm (Thirty x one hundred fifty centimetre ) with anti skid pattern(with matt finish) of approved shade of jhonson/ Kajarai/AGL/RAK or equivalent, (thickness to be specified by the manufacture) with water absorption less than 0.08 % and conforming to IS 15622 of approved made , in all colours and shades, laid on 20mm (Twenty millimetre ) thick cement mortar 1:4(One cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg./ sqm.(Three point three kilogram/square metre) including grouting the joints with white cement and matching the pigment etc. complete with in all leads and lift including carriage of material in all respect and as per direction of Engineer-in- charge. | BI01010001010000000000000515BI0100001139 | 49.5 | Per Square metre |
| 24 | 24 | Providing and laying full body vitrified floor tiles out of single piece riser 20x150cm (Twenty x one hundred fifty centimetre ) with anti skid pattern matt finish in different size(thickness to be specified by manufacture), with water absorption less than 0.08 % and conforming to IS 15622 of approved made , in all colours and shades in skirting, riser of steps, over 12mm(Twelve millimetre) thick bed of cement mortar 1:3(One cement : three coarse sand ) jointing with grey cement slurry @ 3.3 kg./ sqm.(Three point three kilogram/square metre) including grouting the joints with white cement and matching the pigment etc. complete within all leads and lift including carriage of material in all respect and as per direction of Engineer-in- charge. | BI01010001010000000000000515BI0100001140 | 31.5 | Per Square metre |
| 25 | 25 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm (Three hundred x three hundred millimetre ) or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm (Twenty millimetre ) thick Cement Mortar 1:4 (One Cement : four Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three kilogram/square metre) including pointing the joints with white cement and matching pigments etc., complete within all leads and lift including carriage of material in all respect and as per direction of Engineer-in- charge. | BI01010001010000000000000515BI0100001141 | 54.09 | Per Square metre |
| 26 | 26 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm(Twenty millimetre ) thick bed of cement mortar 1:3 (One cement : three coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm.(Three point three kilogram/square metre) including pointing in white cement mixed with pigment of matching shade complete within all leads and lift including carriage of material in all respect and as per direction of Engineer-in- charge. | BI01010001010000000000000515BI0100001142 | 321.33 | Per Square metre |
| 27 | 27 | 15mm (Fifteen millimetre ) cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:4 (One cement : four fine sand) within all leads and lift including carriage of material in all respect and as per direction of Engineer-in- charge. | BI01010001010000000000000515BI0100001143 | 2446.89 | Per Cubic metre |
| 28 | 28 | 6 mm (Six millimetre ) cement plaster of mix 1:3 (One cement : three fine sand) within all leads and lift including carriage of material in all respect and as per direction of Engineer-in- charge. | BI01010001010000000000000515BI0100001144 | 1291.2 | Per Cubic metre |
| 29 | 29 | Providinig and fixing Ist quality GRC/ unistone wall cladding conforming to IS 15622 (thickness to be specified by the manufacture ) of approved made, in all colours shades except burgundy, bottle green, black of any size as approved by Engineer-in- charge , in skirting, risers of steps and dados, over 12mm(Twelve millimetre ) thick bed of cement mortar 1:3 (One cement : three coarse sand ) and jointing with grey cement slurry @ 3.3 kg. /sqm. (Three point three kilogram/ square metre ) including pointing in white cement mixed with pigment of matching shade complete within all leads and lift including carriage of material in all respect and as per direction of Engineer-in- charge. | BI01010001010000000000000515BI0100001145 | 392.92 | Per Square metre |
| 30 | 30 | Providing and fixing GRC panel 30mm (thirty millimetre) thick on external walls as per the architectural drawing . Fixing to be done on external wall including the necessary SS clamps, scaffoldings required etc. complete by specified vendor in strict supervision of manufacture & as per direction of Engineer-in-charge 30mm(thirty millimetre ) thick within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001146 | 82.42 | Per Square metre |
| 31 | 31 | Providing and fixing M.S. Channel door, windows, clerestory windows frame manufacture from M.S. section ISLC 40x75mm(Forty x seventy five millimetre ) and M.S. flat 40x12mm(Forty x twelve millimeter) in combination welded together to made one frame including hinges jamb, lock jamb, beed and if required angle thrashold of mild steel angle 50x25mm (Fifty x twenty five millimetre ) welded or rigidly fixed by mechanical means, lugs with split end tails to each jamb including bright finished or black enamelled mild steel butt hinges 100x 58x1.90mm (One hundred x fifty eight x One point ninety millimetre ) with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after pretreatment of the surface within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001147 | 1005.89 | Per Running metre |
| 32 | 32 | Structure steel work riveted, bolted or welded in builtup sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001148 | 54345.5 | Per Kilogram |
| 33 | 33 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete Fixed to steel windows by welding within all leads and lift including carriage of material in all respect and as per direction of Engineer-in- charge. | BI01010001010000000000000515BI0100001149 | 3338.2 | Per Kilogram |
| 34 | 34 | Providing 40x5 mm (Forty x five millimetre ) flat iron hold fast 40 cm (Forty centimetre ) long including fixing to frame with 10 mm (Ten millimetre ) diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm.(Thirty x ten x fifteen centimetre ) 1:3:6 mix (One cement : three coarse sand : six graded stone aggregate 20mm(Twenty millimetre ) nominal size) within all leads and lift including carriage of material in all respect and as per direction of Engineer-in- charge. | BI01010001010000000000000515BI0100001150 | 400 | Each |
| 35 | 35 | Providing and fixing 40mm (Forty millimetre ) thick panelled and glazed shutters for doors with deodar wood style, rails beading and infil pannel of 12mm(Twelve millimetre) thick phenol bonded pre-laminated(both side ) particle board panel ISI marked No.IS 12823 below middle rail or its eq. panel above middle rail shall be of 5mm (five millimetre) thick glass including ISI marked MS pressed butt hinges bright finished or required size with necessary screws all complete as per direction of Engineer-in- charge within all leads and lift including carriage of material in all respect and as per direction of Engineer-in- charge. | BI01010001010000000000000515BI0100001151 | 50.12 | Per Square metre |
| 36 | 36 | Providing and fixing 40mm (Forty millimetre ) thick panelled and glazed shutters for doors with deodar wood style, rails beading and infil pannel of 12mm(Twelve millimetre) thick phenol bonded pre-laminated(both side ) particle board panel ISI marked No.IS 12823 including ISI marked MS pressed butt hinges bright finished or required size with necessary screws all complete as per direction of Engineer-in- charge within all leads and lift including carriage of material in all respect and as per direction of Engineer-in- charge. | BI01010001010000000000000515BI0100001152 | 113.09 | Per Square metre |
| 37 | 37 | Providing and fixing 40mm(Forty millimeter) thick glazed shutters of deodar wood for doors, windows and clerestory windows using double glass 4mm(four millimeter ) thick float glass panes) panel with rubber gasket to fill the air gap, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws all complete as per direction of Engineer-in- charge within all leads and lift including carriage of material in all respect and as per direction of Engineer-in- charge. | BI01010001010000000000000515BI0100001153 | 139.09 | Per Square metre |
| 38 | 38 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm (One point four millimetre ) in both directions with wire of dia 0.63 mm(Zero point sixty three millimetre ), for doors, windows and clerestory windows with hinges & necessary screws 35 mm (Thirty five millimetre ) thick 2nd class teak wood shutters within all leads and lift including carriage of material in all respect and as per direction of Engineer-in- charge. | BI01010001010000000000000515BI0100001154 | 139.09 | Per Square metre |
| 39 | 39 | Providing and applying white cement based putty of average thickness 1 mm (One millimeter) , of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete within all leads and lift including carriage of material in all respect and as per direction of Engineer-in- charge. | BI01010001010000000000000515BI0100001155 | 3715.37 | Per Square metre |
| 40 | 40 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50(Fifty) gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification Two or more coats on new work within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001156 | 3312.09 | Per Square metre |
| 41 | 41 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001157 | 297.79 | Per Square metre |
| 42 | 42 | Providing and fixing 19mm(Nineteen millimetre ) thick water proof termite resistant commercial board box including shelves and shutters, the back side of clup board/ cabinet shall be 8mm(eight millimetre ) thick ply and all the cut portions of shelves shall be finished with 6mm(Six millimetre) thick hard wood edging. The cut portion of shutters from all sides shall also be finished with 12mm (Twelve millimetre ) thick hard wood edging. The shutter from out side shall be finished with 1mm(One millimetre ) thick lamination of approved shade including piano hinges and magnetic catcher with in all assessories etc. complete as per detailed drawinig within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001158 | 164.16 | Per Square metre |
| 43 | 43 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm (Zero point ninety litre/ ten square metre ) over an under coat of primer applied @0.75 ltr/10 sqm.(Zero point seventy five litres/ ten square metre of approved brand and manufacture within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001159 | 745.9 | Per Square metre |
| 44 | 44 | Providing 19mm(Nineteen millimetre ) thick 60x60cm (Sixty x sixty centimetre ) selected Mandana red stone finishing/ flooring over 20mm(Twenty millimeter) (average) thick base of cement mortar 1:5(One cement : Five coarse sand ), including pointing with cement mortar 1:2(One cement : two stone dust ) with an admixture of pigment to match the shade of stone. The stone shall be finished with rough polish so as not to make it slippery and within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001161 | 9.6 | Per Square metre |
| 45 | 45 | Providing and fixing bright finished brass hard drawn hooks and eyes 200 mm(Two hundred millimetre) within all leads and lift including carriage of material in all respect and as per direction of Engineer-in- charge. | BI01010001010000000000000515BI0100001162 | 370 | Each |
| 46 | 46 | Providing and fixing 18 mm(Eighteen millimetre) thick, 150 mm(One hundred fifty millimetre ) wide pelmet of flat pressed 3(Three) layer or graded wood particle board medium density grade I, IS : 3087 marked, including top cover of 6 mm(Six millimetre ) commercial ply wood conforming to IS: 303 BWR grade, nickel plated M.S. pipe 20 mm(Twenty millimetre ) dia (heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm(Twenty five millimetre x three millimetre ) M.S. flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm(One hundred millimetre x forty millimetre x forty millimetre) on both inner side of pelmet and rawl plugs 75 mm(Seventy five millimetre ) long etc. all complete within all leads and lift including carriage of material in all respect and as per direction of Engineer-in- charge. | BI01010001010000000000000515BI0100001164 | 83.34 | Per Running metre |
| 47 | 47 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge. i) 300 x16mm(Three hundred x sixteen millimetre ). | BI01010001010000000000000515BI0100001165 | 17 | Each |
| 48 | 48 | ii) 250 x16mm(Two hundred fifty x sixteen millimetre ) | BI01010001010000000000000515BI0100001166 | 32 | Each |
| 49 | 49 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge.i) 250 x10mm(Two hundred fifty x ten millimetre ). | BI01010001010000000000000515BI0100001167 | 100 | Each |
| 50 | 50 | ii) 150 x10mm(One hundred fifty x ten millimetre ) | BI01010001010000000000000515BI0100001168 | 200 | Each |
| 51 | 51 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge. i)125mm (One hundred twenty five millimetre). | BI01010001010000000000000515BI0100001169 | 50 | Each |
| 52 | 52 | ii) 100mm (One hundred millimetre) | BI01010001010000000000000515BI0100001170 | 150 | Each |
| 53 | 53 | iii) 75mm (Seventy five millimetre) | BI01010001010000000000000515BI0100001171 | 250 | Each |
| 54 | 54 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete Single rubber stopper within all leads and lift including carriage of material in all respect and as per direction of Engineer-in- charge. | BI01010001010000000000000515BI0100001172 | 20 | Each |
| 55 | 55 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg (Thirty five kilogram ) and door width upto 700 mm(Seven hundred millimetre ), and above with necessary accessories and screws etc. complete within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001173 | 32 | Each |
| 56 | 56 | Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge. i) 40mm (Forty millimetre) | BI01010001010000000000000515BI0100001174 | 50 | Each |
| 57 | 57 | ii) 50mm (Fifty millimetre) | BI01010001010000000000000515BI0100001175 | 10 | Each |
| 58 | 58 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete Double strip (horizontal type) within all leads and lift including carriage of material in all respect and as per direction of Engineer-in- charge. | BI01010001010000000000000515BI0100001176 | 100 | Each |
| 59 | 59 | Providing and fixing 0.62mm(Zero point sixty two millimetre ) thick troughed prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20(Twenty) microns over 5(Five) microns primer coating to back coat of polyster of 5(Five) microns over 5(Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge within all leads and lift including carriage of material in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001177 | 1246.94 | Per Square metre |
| 60 | 60 | Providing and fixing ridges or hips 60 cm (Sixty centimetre ) overall with 0.62mm (Zero point sixty two millimetre ) thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (Twenty) microns over 5(Five) microns primer coating + back coat of polyster of 5(Five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts & nuts 6mm(Six millimetre ) dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charges. | BI01010001010000000000000515BI0100001178 | 203.72 | Per Running metre |
| 61 | 61 | Providing and fixing valleys 90 cm.(Ninety centimetre) overall 0.62mm. (Zero point sixty two millimetre) thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 (Twenty ) micron over 5(Five) microns primer coating back coat of polyster of 5(Five ) micron over 5(Five ) micron primer coating including fixing with , prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetre) dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per direction of Engineer-in -charge within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001179 | 200 | Per Running metre |
| 62 | 62 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm(Zero point fifty millimetre ) (+0.05 %(Zero point zero five percent) total coated\nthickness, Zinc coating 120(One hundred twenty) grams per sqm as per IS: 277(Two hundred seventy seventy ) , in 240(Two hundred forty) mpa steel grade, 5-7(Five- Seven) microns epoxy primer on both side of the sheet and polyester top coat 15-18(Fifteen- eighteen ) microns using self drilling/ self tapping screws complete within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge.i) Flashings/ Aprons.( Upto 600 mm)(Six hundred millimetre) | BI01010001010000000000000515BI0100001180 | 250 | Per Running metre |
| 63 | 63 | ii) Barge board (Upto 300 mm) | BI01010001010000000000000515BI0100001181 | 200 | Per Running metre |
| 64 | 64 | iii) Gutter (600 mm (Sixty millimetre )over all girth) | BI01010001010000000000000515BI0100001182 | 75 | Per Running metre |
| 65 | 65 | Providing and fixing M.S. BP Sheet 1.66mm (One point sixty six millimetre) to 2mm(Two millimetre ) thick in eaves board /facia /soffits /ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separately) within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001183 | 96.56 | Per Square metre |
| 66 | 66 | Providing , supplying and inistallationo of Microcell Polycarbonate 20mm(Twenty millimetre ) thick (minimum). UV protected panel lsystem which shall be uniform in color with an integral microcell core. They should be manufactured with vertical standing seam with standing seam height of 10(Ten) to 20mm(Twenty millimetre) at both sides of the panel. Panels shall be fixed on MS/ trusses, purlins with continuous structural aluminium double wall I - profile spacer together with snap-on connector. These connectors to interlock the panel shall have to 2-4 (Two- four ) tooth grip- lock locking mechanism to ensure maximum uplift capability and shall pass a pull-out load of minimum 4000(Four thousand) N(4 kN ) when tested as per lSO 6892:1998 and IS 16-8:2005. Panel lshall be with additional End- cap/ aluminium U- profile( mill finish) for ends including glass wool 100mm (One hundred millimetre ) within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001184 | 45 | Per Square metre |
| 67 | 67 | Providing and fixing 75mm(Seventy five millimetre) x 60mm(Sixty millimeter rounded hand rails in stright length complete in Ist class Indian teak wood ) within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001185 | 40 | Per metre |
| 68 | 68 | Making plinth protection 50mm(Fifty millimetre ) thick of cement concrete 1:3:6 (One cement : three coarse sand (zone - III) : six graded stone aggregate 20 mm(Twenty millimetre) nominal size) over 75mm(Seventy five millimetre) thick bed of dry brick ballast 40 mm(Forty millimetre ) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001187 | 33.75 | Per Square metre |
| 69 | 69 | Providing and laying 60mm(Sixty millimetre ) thick cement concrete paver block of M-35 grade with approved colour, design & pattern factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001188 | 33.75 | Per Square metre |
| 70 | 70 | Providing and laying jointing 23cm (Twenty three centimetre ) dia half rouund glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in proporation of 1:1 (One cement : one fine sand) including testing of joints etc. complete within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001189 | 100 | Per running metre |
| 71 | 71 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (One cement : four coarse sand) C.I. cover with frame (light duty) 455x610 mm(Four hundred fifty five x six hundred ten millimetre ) internal dimensions, total weight of cover with frame to be not less than 38 kg(Thirty eight kilogram) (weight of cover 23 kg (Twenty three kiligram) and weight of frame 15 kg)(Fifteen kilogram ), R.C.C. top slab with 1:1.5:3 mix (One cement : one point five Fine sand : three graded stone aggregate 20 mm(Twenty millimetre ) nominal size), foundation concrete 1:5:10 (One cement : five fine sand : ten graded stone aggregate 40 mm (Forty millimetre) nominal size), inside plastering 12 mm (Twelve millimetre ) thick with cement mortar 1:3 (One cement : three coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Seven point five ) within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001190 | 5 | Each |
| 72 | 72 | Constructing brick masonry circular manhole 1.22 m(One point twenty two metre) internal dia at bottom and 0.56 m(Zero point fifty six metre ) dia at top in cement mortar 1:4 (One cement :four coarse sand) inside cement plaster 12 mm (Twelve millimetre ) thick with cement mortar 1:3 (One cement : three coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (One cement : three coarse sand : six graded stone aggregate 40 mm (Forty millimetre ) nominal size) and making necessary channel in cement concrete 1:2:4 (One cement : two coarse sand : four graded stone aggregate 20 mm(twenty millimetre ) nominal size) finished with a floating coat of neat cement, all complete as per standard design 1.68 m(One point sixty eight metre ) deep with SFRC Cover and frame (heavy duty HD- 20 grade designation) 560 mm (Five hundred sixty millimetre) internal diameter conform- ing to I.S. 12592, total weight of cover and frame to be not less than 182 kg.(One hundred eighty two kilogram ) fixed in cement concrete 1:2:4 (One cement : two coarse sand : four graded stone aggregate 20 mm(Twenty millimetre ) nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm(Twelve millimetre ) thick cement plaster at the external surface shall be paid for separately) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Seven point five) within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001192 | 2 | Each |
| 73 | 73 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm (Zero point ninety litres/ ten square metre over an under coat of primer applied @ 0.80 ltr/ 10 sqm (Zero point eighty litres/ ten square metre ) of approved brand and manufacture within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001194 | 1227.6 | Per Square metre |
| 74 | 74 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm(Fifty x fifty millimetre) including strengthening with 2 mm(Two millimetre ) dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge Made of G.I. wire of dia. 4 mm (Four millimetre ), PVC coated to achieve outer dia not less than 5 mm(Five millimetre ) in required colour and shade within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001195 | 238 | Per Square metre |
| 75 | 75 | Providing and laying heavy duty Cobble stone 100x100x100mm (One hundred x one hundred x one hundred millimeter) of approved shade stone laid over 25mm(Twenty five millimeter ) thick cement mortar bed of 1:4 (One cement : four sand ) includinhg pointing with cement mortar 1:3(one cement : three sand) complete within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001196 | 178.8 | Per Square metre |
| 76 | 76 | Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor any level Masonry work (second sort), in cement mortar 1:6 (One cement: six coarse sand) within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001197 | 190.43 | Per Square metre |
| 77 | 77 | Providing and fixing 18 mm(Eighteen millimetre ) thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm(Twenty millimetre ) thick base cement mortar 1:4 (One cement : four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Area of slab over 0.50 sqm. (Zero point fifty square metre ) within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001198 | 7.2 | Per Square metre |
| 78 | 78 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm(Ten millimetre ) gap for thermal expansion Single socketed pipes 110 mm (One hundred ten millimetre ) diameter within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001199 | 200 | Per Running metre |
| 79 | 79 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm(Ten millimetre ) gap for thermal expansion within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. i) Coupler 110mm (One hundred ten millimetre ). | BI01010001010000000000000515BI0100001200 | 15 | Each |
| 80 | 80 | ii) Single tee with door 110mm (One hundred ten millimetre ) | BI01010001010000000000000515BI0100001201 | 15 | Each |
| 81 | 81 | iii) Bends 87.5* (Eighty seven point five degree) ,110mm(One hundred ten millimeter) | BI01010001010000000000000515BI0100001202 | 15 | Each |
| 82 | 82 | iv) Shoe(Plain ) 110mm (One hundred ten millimetre ) | BI01010001010000000000000515BI0100001203 | 15 | Each |
| 83 | 83 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm (Fifty x fifty x fifty millimetre ) hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (One cement : four coarse sand) and making good the wall etc. complete 110 mm (One hundred ten millimetre ) diameter within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001204 | 50 | Each |
| 84 | 84 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm (Fifteen centimetre ) diameter and weighing not less than 440 (Four hundred forty ) grams within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001205 | 10 | Each |
| 85 | 85 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm (Five hundred ninety five x five hundred ninety five millimetre ) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm. (One hundred twenty grams/ square metre ) , both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm (Twenty four into paise thirty eight millimetre ) made from 0.30 mm (Zero point thirty millimetre ) thick (minimum) sheet, spaced at 1200 mm(One thousand two hundred millimetre ) center to center and cross "T" of size 24x25 mm(Twenty four x twenty five millimetre ) made of 0.30 mm (Zero point thirty millimetre ) thick (minimum) sheet, 1200 mm(One thousand two hundred millimetre ) long spaced between main "T" at 600 mm (Six hundred millimetre ) center to center to form a grid of 1200x600 mm (One thousand two hundred x six hundred millimetre) and secondary cross "T" of length 600 mm(Six hundred millimetre ) & size 24x25 mm(Twenty four x twenty five millimetre) made of 0.30 mm(Zero point thirty millimetre ) thick (minimum) sheet to be interlocked at middle of the 1200x600 mm(One thousand two hundred x six hundred millimetre ) panel to form grids of 600x600 mm(Six hundred x six hundred millimetre ) and wall angle of size 24x24x0.3 mm (Twenty four x twenty four x zero point three millimetre ) and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm(Twenty seven x thirty seven x twenty five x One point six millimetre ) fixed to ceiling with 12.5 mm (Twelve point five millimetre ) dia and 50 mm (Fifty millimetre) long dash fasteners, 4 mm(Four millimetre) GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm (Eighty five x thirty x zero point eight millimetre ) spaced at 1200mm (One thousand two hundred millimetre ) center to center along main T, bottom exposed width of 24 mm (Twenty four millimetre ) of all T-sections shall be prepainted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm (Five hundred ninety five x five hundred ninety five ) and 0.5 mm (Zero point five millimetre ) thick with 8 mm (Eight millimetre) drop; made of GI sheet having galvanizing of 100 gms/sqm.(One hundred grams/ per square metre ) (both sides inclusive) and 20% perforation area with 1.8 mm (One point eight millimetre ) dia holes and having NRC (Noise Reduction Coefficient ) of 0.5(Zero point five), electro statically polyester powder coated of thickness 60 (Sixty ) microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001206 | 54.27 | Per Square metre |
| 86 | 86 | Providing and fixing aluminium work for doors, windows,ventilators and partitions with extruded built upstandard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately)For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001207 | 50 | Per Kilogram |
| 87 | 87 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) With float glass panes of 5 mm (Five millimetre ) thickness (weight not less than 12.50 kg/ sqm.( Twelve point fifty Killogram per square metre ) within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001208 | 9.03 | Per Square metre |
| 88 | 88 | Providing and placing in horizontal layers with following materials filtering media duly grade screened washed and cleaned as specified by Engineer-in- charge within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. i) Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm (One point fivemillimetre to two millimetre ) in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in- charge. | BI01010001010000000000000515BI0100001209 | 0.23 | Per Cubic metre |
| 89 | 89 | ii) Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm (Five mllimetre to ten millimetre ) , in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-incharge. | BI01010001010000000000000515BI0100001210 | 0.23 | Per Cubic metre |
| 90 | 90 | iii) Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm (Five centimetre to twenty centimetre , in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001211 | 0.23 | Per Cubic metre |
| 91 | 91 | WS&SI Providing and fixing white vitreous china pedestal type water closet (European type) of CERA or equivalent with seat and lid, 10(Ten) litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm (Forty millimetre ) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001212 | 13 | Each |
| 92 | 92 | Providing and fixing vitreous china wash basin with a pair of C.I. brackets, 15 mm(Fifteen millimetre ) C.P. brass pillar taps, 32 mm (Thirty two millimetre ) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Wash basin size 550x400 mm ( Five hundred fifty x four hundred millimetre ) of CERA or equivalent within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001213 | 13 | Each |
| 93 | 93 | Providing and fixing white vitreous china pedestal for wash basin of CERA or equivalent completely recessed at the back for the reception of pipes and fittings within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001215 | 13 | Each |
| 94 | 94 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 of Cera or equivalent with C.I. brackets and stainless steel plug 40 mm(Forty millimetre) , including painting of fittings and brackets, cutting and making good the walls wherever required 610x510 mm (Six hundred ten x five hundred ten millimetre ) bowl depth 200mm (Two hundred millimetre ) within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001216 | 2 | Each |
| 95 | 95 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved\nby Engineer - in - charge within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001217 | 13 | Each |
| 96 | 96 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete 32mm (Thirty two millimetre ) dia within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001220 | 25 | Each |
| 97 | 97 | Providing and fixing 100 mm(One hundred millimetre ) sand cast Iron grating for gully trap within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001221 | 30 | Each |
| 98 | 98 | Providing an fixing 600x450mm (Six hundred x four hundred fifty millimetre)superior glass (of approved quality) complete with 6 mm (Six millimeter ) thick hard board ground fixed to wooden cleats with C.P.brass screws and washers complete within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001223 | 13 | Each |
| 99 | 99 | Providing and fixing toilet paper holder holder of CERA or equilvant within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001224 | 13 | Each |
| 100 | 100 | Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C (Eighty degree) , including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00(One point zero) metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. i) 1216 (One thousand two hundred sixteen) 16mm(Sixteen millimeter) OD | BI01010001010000000000000515BI0100001225 | 200 | Per Running metre |
| 101 | 101 | ii) 1620 (One thousand six hundred twenty) 20mm(twenty millimeter) OD | BI01010001010000000000000515BI0100001226 | 200 | Per Running metre |
| 102 | 102 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. i)15mm (Fifteen millimeter ) nominal bore . | BI01010001010000000000000515BI0100001228 | 100 | Per Running metre |
| 103 | 103 | ii)20mm (Twenty millimeter ) nominal bore . | BI01010001010000000000000515BI0100001229 | 100 | Per Running metre |
| 104 | 104 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete 20 (Twenty ) to 40mm (Forty millimetre ) nominal bore ) within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001230 | 5 | Each |
| 105 | 105 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. i) 110mm (One hundred ten millimetre ) | BI01010001010000000000000515BI0100001231 | 150 | Per Running metre |
| 106 | 106 | i)150mm (One hundred fifty millimetre ) | BI01010001010000000000000515BI0100001232 | 150 | Per Running metre |
| 107 | 107 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. i)15mm (Fifteen millimeter ) nominal bore . | BI01010001010000000000000515BI0100001233 | 10 | Each |
| 108 | 108 | ii)20mm (Twenty millimeter ) nominal bore . | BI01010001010000000000000515BI0100001234 | 10 | Each |
| 109 | 109 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001235 | 4000 | Per litre |
| 110 | 110 | Providing and fixing C.P. brass long nose bib cock of approved quality of CERA or equivalent conforming to IS standards and weighing not less than 810 gms (Eight hundred ten grams) within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001236 | 2 | Each |
| 111 | 111 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 CERA or equivalent 15mm (fifteen millimeter nominal bore within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001237 | 70 | Each |
| 112 | 112 | Providing and fixing uplasticised PVC connection pipe with brass unions within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. i)15mm (Fifteen millimeter ) nominal bore . | BI01010001010000000000000515BI0100001238 | 20 | Each |
| 113 | 113 | ii)20mm (Twenty millimeter ) nominal bore . | BI01010001010000000000000515BI0100001239 | 20 | Each |
| 114 | 114 | Providing and fixing enclosed type water meter (bulk type) conforming to IS : 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately) 80 mm(Eighty millimetre) dia nominal bore within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001240 | 2 | Each |
| 115 | 115 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball 20 mm (Twenty millimetre ) nominal bore, 120 mm (One hundred twenty millimetre ) long, weighing not less than 198 gms(One hundred ninety eight gram) within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001241 | 2 | Each |
| 116 | 116 | Providing and fixing PTMT soap Dish Holder having length of 138mm(One hundred thirty eight millimetre) , breadth 102mm(One hundred two millimetre) , height of 75mm (Seventy five millimetre ) with concealed fitting arrangements, weighing not less than 106 gms.(One hundred six grams) of CERA or equivalent within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001242 | 20 | Each |
| 117 | 117 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittinig arrangement of approved qualithy and colour 600 mm (Six hundred millimetre ) long towel rail with total length of 645 mm (Six hundred forty five millimetre ) , width 78 mm (Seventy eight millimetre ) and effective height of 88 mm(Eighty eight millimetre) , weighing not less than 190 gms. (One hundred ninety grams) within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge : CERA or equivalent . | BI01010001010000000000000515BI0100001243 | 4 | Each |
| 118 | 118 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm (Two hundred fifteen millimetre ) long, 200 mm(Two hundred millimetre) wide with minimum distances of 37 mm (Thirty seven millimetre ) from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.(Eighty eighty grams) of CERA or equivalent within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001244 | 15 | Each |
| 119 | 119 | Providing and fixing PTMT shelf 440 mm (Four hundred fourteen millimetre ) long, 124 mm (One hundred twenty four millimetre ) width and 36 mm (Thirty six millimetre ) height of approved quality and colour, weighing not less than 300 gms.(Three hundred grams ) within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001245 | 5 | Each |
| 120 | 120 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931of CERA or equivalent 15mm(fifteen millimetre) nominal bore within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001246 | 25 | Each |
| 121 | 121 | Providing and fixing white vitreous china flat back half stall urinal of CERA or equivalent of size 580x380x350 mm (Five hundred eighty x three hundred eighty x three hundred fifty millimetre ) with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required Single half stall urinal with 5 litre P.V.C. automatic flushing cistern within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001247 | 10 | Each |
| 122 | 122 | Providing and fixing PVC trap floor trap ISI marked of self cleaning design of CERA or equivalent including fixing with approved adhesive, cost of cuttinig and making good the wall and floors etc. complete 110mmx 75mm (One hundred ten millimetre x Seventy five millimetre ) within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001248 | 50 | Each |
| 123 | 123 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality Rectangular shape 600x450 mm(Six hundred x four hundred fifty millimetre ) internal dimensions within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001268 | 2 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
