|
| 1 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of50 m. beyond the building areaand stacking andspreadingasdirected,dewatering,preparingthebedfor thefoundationandnecessarybackfilling,ramming,watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) |
| 2 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of50 m. beyond the building areaand stacking andspreadingasdirected,dewatering,preparingthebedfor thefoundationandnecessarybackfilling,ramming,watering including shoring and strutting etc. complete. (Lift upto 1.5 m to 3.00 m.) |
| 3 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishingifrequiredandcuringcomplete,withfullyautomatic microprocessorbasedPLCwithSCADAenabledreversible DrumTypemixer/concreteBatchmixplant(Panmixer)etc. complete.With natural sand/V.S.I. quality Artificial Sand |
| 4 | Providing and laying in situ/Ready Mixcement concreteM-20 oftrap/granite/quartzite/gneiss metalforR.C.C.work in foundations like raft,strip foundations,grillage and footings of R.C.C.columns and steelstanchions etc. including bailing out water,formwork,laying/pumping coverblocks,compaction andcuringrougheningthesurfaceifspecialfinishistobe provided(Excludingreinforcementandstructuralsteel)etc. complete, with fully automatic micro processor based PLC with SCADAenabledreversibleDrumTypemixer/concreteBatch mixplant(Panmixer)etc.complete.Withnaturalsand/V.S.I. quality Artificial Sand |
| 5 | Providing and laying Cast in situ/Ready Mix cement concrete M 20 of trap / granite /quartzite/ gneiss metal forR.C.C. columns asperdetaileddesignsanddrawingorasdirectedincluding centering,formwork,coverblocks,laying/pumping, compactionfinishingtheformedsurfaceswithcementmortar 1:3 of sufficient minimum thickness to give a smooth and even surfaceorrougheningifspecialfinishistobeprovidedand curingetc.complete,(Excludingreinforcementandstructural steel).with fully automatic micro processor based PLC with SCADAenabledreversibleDrumTypemixer/concreteBatch mixplant(Panmixer)etc.complete.Withnaturalsand/V.S.I. quality Artificial Sand |
| 6 | Providing and laying Cast in situ/Ready Mix cement concrete M 20oftrap/granite/quartzite/gneissmetalforR.C.C.beams and lintels as per detailed designs and drawings or as directed includingcentering,formwork,coverblocks,laying/pumping, compactionand roughening the surface if special finish is to be providedandcuringetc.complete.(Excludingreinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 7 | Providingsolingusing80mmsizetrapmetalin15cm.layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. |
| 8 | Filling in plinthandfloorswithcontractors material /brought fromoutsideandapprovedbyEngineerincharge inlayersof 15cm to20cmincludingwateringandcompactionetc. complete. |
| 9 | Filling in plinth and floors withapprovedexcavated material in 15cm. to 20cm. layers including watering and compacting etc. complete. |
| 10 | Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADAenabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) |
| 11 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landingsas per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) |
| 12 | Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 sqm /kg with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete. |
| 13 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs,beamscolumns,canopies,staircase,newels,chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawingsandschedules.includingcutting,bending,hooking the bars,binding with wires or tack welding and supporting as required complete. |
| 14 | Providing secondclass Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of innerwalls/inplinthexternalwallsincluding bailingoutwater manually ,striking jointson unexposedfaces,raking out joints on exposed faces and watering etc. Complete. |
| 15 | Providing secondclass Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including strikingjoints,rakingoutjoints,wateringandscaffoldingetc. Complete |
| 16 | Providing and laying Cast in situ/Ready Mix cement concrete M 15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed includingsteelcentering,plywood/steelformwork compacting, roughening them if special finish is to be provided, finishingunevenandhoneycombedsurfaceandcuringetc. complete.TheCementMortar1:3plasterisconsideredfor rendering uneven and honeycombed surfaceonly.Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) |
| 17 | Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete |
| 18 | Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. |
| 19 | Providinginternalcementplaster20mmthickintwocoatsin cement mortar 1:5 without neeru finish,to concrete, brick surface,inallpositionsincludingscaffoldingandcuringetc. complete |
| 20 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receivethesandfacedtreatment6to8mmthickincement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. |
| 21 | Providing patti/ band 100mm wide on plastered surface 12 mm to 15 mm thick in C.M. 1:3 line and level including neat finishing scaffolding curing etc. complete. |
| 22 | Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. |
| 23 | Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With colour Anodising with box. |
| 24 | Providing and fixing single or double leaf panelled door shutter excluding frame with glazed openable fanlight shutter 35 mm thick as per detailed drawing consistingpanelled vertical styles 100 mm x 35 mm and lock and bottom rail 200 mm x 35 mm and panels 12 mm thick both side commercial ply faced particleboard including stainless steel fixtures and fastening and T.W. beading at junctions of panel inserts and as instructed by the Engineer in charge including 3 coats of oil painting etc. complete. |
| 25 | Providing and laying vitrified mirror / glossy finish tiles decorative typehaving size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearingetc. complete. a) Flooring |
| 26 | Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearingetc. complete.b) Skirting |
| 27 | Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete. |
| 28 | Providing and applying plastic emulsion paint of approved quality, colour and shade tonew surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete. |
| 29 | Providing and applying two coats ofexterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete. |
| 30 | Providing groove to required size at specified location as directed by Engineer, at junction of brick masonry wall and R.C.C beams or Column, at junction of composite masonry, including scaffolding, finishing, curing etc. complete. |
| 31 | Providing and laying chequered tiles of approved qualityof size 30 cm x 30 cm, confirming to corresponding I.S. for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. |
