|
| 1 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) by Mechanical Means. |
| 2 | Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering,preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift |
| 3 | Filling in plinth and floors with contractors soil.Sand or murum materials in 15 cm to 20 cm layers including watering & compaction complete. |
| 4 | Providing dry trap rubble stone soling 15cm to20cm thick including hand packing andcompacting complete. |
| 5 | Providing and laying Cast in situ/ Ready Mix cement concrete in M-10 of trap/ granite/quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural sand/ Crushed sand V.S.I. Grade finely washed etc.) |
| 6 | Providing and laying in situ/ Ready Mix cement concrete M-20 of trap/ granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft,strip foundations, grillage and footings of R.C.C.columns and steel stanchions etc. including bailing out water, formwork, laying/ pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided,(Excluding reinforcement and structural steel) etc.complete, with fully automatic micro processor |
| 7 | Providing and laying cast in situ/ Ready Mixcement concrete M-20 of trap/ granite/ quartzite/gneiss metal for R.C.C. columns as per detaileddesigns and drawing or as directed includingcentering, formwork, cover blocks, laying/pumping, compaction finishing the formedsurfaces with cement mortar 1:3 of sufficientminimum thickness to give a smooth and evensurface or roughening if special finish is to beprovided and curing etc. complete, (Excludingreinforcement and structural steel) with fullyautomatic micro processor based PLC withSCADA enabled Reversible Drum Type mixer/concrete Batch Mix plant (Pan mixer) etc.complete with fine aggregate (Natural Sand/Crushed Sand V.S.I. Grade finely washed etc.) |
| 8 | Providing and laying Cast in situ/ Ready Mixcement concrete M-20 of trap/ granite/quartzite/gneiss metal for R.C.C. Beams and Lintels as perdetailed designs and drawings or as directedincluding centering, formwork, cover blocks,laying/ pumping, compactionand roughening thesurface if special finish is to be provided andcuring etc. complete. (Excluding reinforcementand structural steel), with fully automatic microprocessor based PLC with SCADA enabledReversible Drum Type mixer/ concrete Batch Mixplant (Pan mixer) etc. complete with fineaggregate (Natural Sand/ Crushed Sand V.S.I.Grade finely washed etc.) |
| 9 | Providing and fixing in position TMT FE -500 barreinforcement of various diameters for R.C.C. pilecaps, footings, foundations, slabs, beams columns,canopies, staircase, newels, chajjas, lintels pardis,copings, fins, arches etc. as per detailed designs,drawings and schedules, including cutting,bending, hooking the bars, binding with wires or tack welding and supporting as required complete |
| 10 | Providing second class Burnt Brick masonry withconventional /I. S. type bricks in cement mortar1:6 in foundations and plinth of inner walls /inplinth external walls including bailing out watermanually, striking joints on unexposed faces,raking out joints on exposed faces and wateringcomplete. |
| 11 | Providing and laying in situ cement concrete M-20 with tremix treatment for 100 mm. thicknessfor flooring with groove cutting of 4 mm. wideand 20 mm. deep with necessary refilling withbitumen etc. complete. |
| 12 | Providing and fabricating structural steel work inrolled sections like joists, channels, angles, teesetc. as per detailed design and drawings or asdirected including cutting, fabricating, hoisting,erecting, fixing in position making riveted / bolted/welded connections without connecting plates,braces etc. and including one coat of anticorrosivepaint and over it two coats of oil painting ofapproved quality and shade etc. complete. |
| 13 | Providing structural steel work in trusses, othersimilar trussed purlins and members with allbracing, gusset plates etc. as per detailed designsand drawings or as directed including cutting,fabricating, hoisting, erecting fixing in position,Making riveted/bolted/welded connection and onecoat of anticorrosive paint and over it 2 coats ofoil painting approved quality and shade etc.complete. |
| 14 | Providing and fixing colour coated Zincalume ( R) AZ150 ( min 150 gms/sq.mt. total on each side )profiled sheets for roofing. The feed material ismanufactured out of nominal 0.45 mm Base MetalThickness ( BMT ) (0.5 mm TCT ), Hi-strengthsteel with min.550 MPa yield strength, metallichot dip coated with Aluminium-Zinc alloy (55%aluminium 43.4% zinc 1.6% silicon) withCOLORBOND ( R ) steel quality super durablepolyester paint coat ( with inorganic pigment).The paint shall have a total coating thickness ofnominal 35 um, comprising of nominal 25 umexterior coat on top surface and nominal 10 umreverse coat on back surface. Profile sheet shallhave nom. 950-1050 mm effective cover widthand nominal 25-30 mm deep ribs with subtlesquare fluting in the five pan at nominal 180-250mm center-to-center. The end rib shall bedesigned for anti-capillary groove. and return leg.The feed material should have coil manufacturersproduct details marked a regular interval.Including fasteners with min. fastened with min.25 um Zinc-Tin alloy coated, Hex head, selfdrillingscrew etc. complete. (weight of profile4.52 kg/sqm) |
| 15 | Providing and fixing of colour coatedZincaluminium( R ) AZ150 ( min 150 gms/sq.mt.total on each side ) profiled sheets for roofing.The feed material is manufactured out of nominal0.45 mm Base Metal Thickness ( BMT ) (0.5 mmTCT ), Hi-strength steel with min.550 MPa yieldstrength, metallic hot dip coated withAluminium-Zinc alloy (55% aluminiumm 43.4% zinc 1.6%silicon) with COLORBOND ( R ) steel qualitysuper durable polyster paint coat ( with inorganicpigment). The paint shall have a total coatingthickness of nominal 35 mm, comprising ofnominal 25mmexterior coat on top surface andnominal 10 um reverse coat on back surface.Profile sheet shall have nom. 950-1050 mmeffective cover width and nominal 25-30 mm deepribs with sublet square fluting in the five pan atnominal 180-250 mmcenter-to-center. The end ribshall be designed for anti-capacity groove. andreturn leg. The feed material should have coilmanufacturers product details marked a regularinterval. including fasteners with min. fastenedwith min. 25 um Zinc-Tin alloy coated, Hex head,self-drilling screw etc. complete. (weight ofprofile 4.52 kg/sqm) 600 mm girth (SurfaceWidth). |
