Rural Engineering Services-RES has published Up Gradation Work Of Musk Deer Research Center , Mehrauli Block Kapkot Bageshwar. Submission Date for this Tender is 28-05-2021. Building Work Tenders in Kapkot Bageshwar Uttarakhand. Bidders can get complete Tender details and download the document.
| Name of Work: ??????? ??? ???????? ??????? ?????? ?? ???????? ?? ????? (????????? ?????) | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in excavation by mechanical means (Hydraulic Excavat in foundation trenches or drains (not exceeding 1.5 m in width or 1 including dressing of sides and ramming of bottoms, lift upto 1.5 out the excavated soil and disposal of surplus excavated soil as dir of 50 m.All kinds of soil. | 165.86 | cum | |
| 2 | 2 | P.C.C 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) | 31.27 | cum | |
| 3 | 3 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | 39.8 | cum | |
| 4 | 4 | Random rubble masonry with hard stone in foundation and plinth i levellingup with cement concrete 1:6:12 (1 cement: 6 coarse sand aggregate 20mm nominal size) at plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand) | 149.29 | cum | |
| 5 | 5 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 10062.5 | kg | |
| 6 | 6 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction ofEngineer-in-charge.Made of G.I. wire of dia 4 mm | 4448.34 | Sqm | |
| 7 | 7 | Centring and shuttering including strutting,ropping etc. and removal of form for \n | |||
| 8 | 7.01 | Lintels, beams, plinth beams, girders, bressumers and cantilevers. | 131.98 | Sqm | |
| 9 | 8 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.Reinforcement for R.C.C. Work Using Mild Steel Treated Bars | 4090.03 | kg | |
| 10 | 9 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. upto floor five level excluding cost of centring,shuttering, finishing and reinforcementR.C.C 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) | 16.74 | cum | |
| 11 | 10 | Brick work with F.P.S. bricks of class designation 75 in sperstructure above plinth level upto floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) | 88.87 | cum | |
| 12 | 11 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters .30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. | 71.17 | Sqm | |
| 13 | 12 | Providing and fixing panelled or panelled and gl glazed shutters for doors, windows and clerestory windows i/c panelling which will be paid separately.35 mm th. shutter Kiln seasoned and chemically treated hollock wood | 13.5 | Sqm | |
| 14 | 13 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge Ply wood 5 ply, 9 mm thick | 6.48 | Sqm | |
| 15 | 14 | Providing and fixing panelling or panelling and gl glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured).25 mm to 40 mm th. hollock wood panelling.. | 19.98 | Sqm | |
| 16 | 15 | Providing and fixing aluminium handles ISI marked anodised (anod less than grade AC 10 as per IS : 1868) transparent or dyed to req. | |||
| 17 | 15.01 | 125mm | 84 | no | |
| 18 | 15.02 | 75mm | 36 | no | |
| 19 | 16 | Providing and fixing aluminium tower bolts ISI marked anodised (a not less than grade AC 10 as per IS:1868) transparent or dyed t or shade with necessary screws etc.complete. | |||
| 20 | 16.01 | 150X10mm | 54 | No | |
| 21 | 16.02 | 100X10mm | 36 | No | |
| 22 | 17 | Providing and fixing aluminium sliding door bolts ISI marked anodi coating not less than grade AC 10 as per IS : 1868) transparent or colour or shade with nuts and screws etc. complete | |||
| 23 | 17.01 | 250x16 mm | 39 | N0 | |
| 24 | 18 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all completWith 2nd class teak wood beading 62X19 mm | 19.44 | Sqm | |
| 25 | 19 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complet With 12mm mild steel U Beading | 16.16 | Sqm | |
| 26 | 20 | Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete..40mm thick with 20mm nominal size stone aggregate. | 208.99 | cum | |
| 27 | 21 | Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick | 390.49 | Rmt | |
| 28 | 22 | 12 mm cement plaster of mix1:6 (1 cement : 6 fine sand) | 1962.16 | Sqm | |
| 29 | 23 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including priming coat with cement primer | 674.58 | Sqm | |
| 30 | 24 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @0.75 ltr /10 sqm | 736.23 | Sqm | |
| 31 | 25 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of\napproved brand or manufacture | 527.35 | Sqm | |
| 32 | 26 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm | 90.78 | Sqm | |
| 33 | 27 | Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade Old work (one or more coats) | 294.2 | Sqm | |
| 34 | 28 | Finishing walls with textured exterior paint of required shade :Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10\nsqm. | 230.7 | Sqm | |
| 35 | 29 | Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge)0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required | 694.53 | sq.m | |
| 36 | 30 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete Ridges plain (500 - 600mm) | 132.86 | Rmt | |
| 37 | 31 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position :Kiln seasoned and chemically treated hollock wood | 2.03 | Cum | |
| 38 | 32 | Constructing soak pit 1.20x1.20x1.20 m filled with brickbats includin S.W. drain pipe 100 mm diameter and 1.20 m long complete as per | 18 | No | |
| 39 | 33 | Providing and laying in position cement concrete of specified grade cost of centring and shuttering - -All work upto plinth level 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) | 4.83 | cum | |
| 40 | 34 | Reinforced cement concrete work in excluding shuttering, finishing and reinforcement--- 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) Substructure | 1.79 | cum | |
| 41 | 35 | Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) | 2.44 | cum | |
| 42 | 36 | Structural steel work riveted, bolted or welded in built up se trusses and framed work, including cutting, hoisting, fixing in and applying a priming coat of approved steel primer all complete | 3327.89 | KG | |
| 43 | 37 | S/F of glass paneswith putty & nails whereever necessary Float glass panes of thickness 4mmFloat glass panes of thickness 4mm | 5.535 | sqm, | |
| 44 | 38 | Providing and fixing aluminium tower bolts ISI marked anodised (a not less than grade AC 10 as per IS : 1868 ) transparent or dyed t or shade with necessary screws etc. complete 200x10 mm | 48 | NOS | |
| 45 | 39 | Providing and fixing aluminium hanging floor door stopper ISI mar (anodic coating not less than grade AC 10 as per IS : 1868) transp required colour and shade with necessary screws etc. complete.Single rubber stopper | 7 | NOS | |
| 46 | 40 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern,including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid: | 3 | N0 | |
| 47 | 41 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15mm nominal bore. | 3 | N0 | |
| 48 | 42 | Providing and fixing brass stop cock of approved quality 15 mm nominal bore | 3 | N0 | |
| 49 | 43 | Providing and placing on terrace (at all floor litre levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank | 3500 | Lit | |
| 50 | 44 | Providing and fixing soil, waste and vent pipes100 mm dia Sand cast iron S&S pipe as per IS: 1729 | 12 | mtr | |
| 51 | 45 | Providing and fixing soil, waste and vent pipes:75 mm dia.Sand cast iron S&S pipe as per IS: 1729. | 3 | mtr | |
| 52 | 46 | Providing and fixing ball valve (brass) of approved quality complete High or low pressure with plastic floats 15 mm nominal bore | 2 | N0 | |
| 53 | 47 | Providing and fixing G.I. pipes complete with G.I. fittings including refilling etc. (external work)15 mm dia. nominal bore | 48 | Rmt | |
| 54 | 48 | Providing and fixing G.I. pipes complete with G.I. fittings and clam cutting and making good the walls etc. Iinternal work - Exposed on 15 mm dia. nominal bore | 42 | Rmt | |
| 55 | 49 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (i) Single socketed pipes | |||
| 56 | 49.01 | 110 mm diameter | 12 | mtr | |
| 57 | 50 | Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centring, shuttering and finishing. 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). | 0.41 | CUM | |
| 58 | 51 | Providing and fixing Ist quality ceramic glazed wall tiles of approved make, in all colours, shades over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry with pigment of matching shade complete. | 13.95 | sqm, | |
| 59 | 52 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm of approved make, in all colours, shades, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurryt and matching pigments etc., complete. | 28.2 | sqm, | |
| 60 | 53 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete 10 litre capacity - White | 3 | N0 | |
| 61 | 54 | Constructing masonry Chamber 30x30x50 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 ( 1 cement :5 fine sand:10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design :With F.P.S. bricks | 5 | N0 | |
| 62 | 55 | Providing and fixing wash basin with C.I. brackets, 15 mmPTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. | 3 | N0 | |
| 63 | 56 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. completeHot finished welded type tubes | 2605.16 | kg | |
| 64 | 57 | Providing and laying vitrified floor tiles ,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),jointing with grey cement slurry including grouting the joints with white cement and matching pigments etc., completes Size of Tile 600x600 mm | 45.56 | sqm | |
| 65 | 58 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps,over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete | 2.76 | sqm | |
| 66 | 59 | Providing and fixing Ist quality ceramic glazed wall tiles of approved make, in all colours, shades over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry with pigment of matching shade complete. | 5.58 | sqm | |
| 67 | 60 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P.brass pillar taps | 1 | nos | |
| 68 | 61 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. | 1 | NOS | |
| 69 | 62 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe | 1 | NOS | |
| 70 | 63 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | 11.77 | CUM | |
| 71 | 64 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | 22.68 | SQM | |
| 72 | 65 | Providing and fixing white vitreous china water closet squatting pan (Indian type) :Orissa pattern W.C. pan of size 580x440 mm | 1 | N0 | |
| 73 | 66 | Cement plaster skirting (up to 30 cm height) with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement. 18 mm thick | 36 | SQM | |
| 74 | 67 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45cm dry brick honey With F.P.S. bricks | 1 | N0 | |
| 75 | 68 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | 1 | N0 | |
| 76 | 69 | Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm,cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners,6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry | 20.16 | Sqm | |
| 77 | 70 | Excavation in soil in Hilly Area by mechanical means Without useinng Dozer including cutting and trimming of side slopes and disposing of excavated earth with a lift upto 1.5 m and a lead upto 20 m | 104.31 | cum | |
| 78 | 71 | Excavation in hilly area in ordinary rock not requiring blasting by mechanical means without using Dozer including cutting and trimming of slopes and disposal of cut material with a lift upto 1.5 m and lead upto 20 m | 30.24 | cum | |
| 79 | 72 | Excavation in foundation for retaining & breast walls in all types of soils and rocks including lead, lift and disposal of surplus material as per direction of engineer - in - charge | 22.88 | cum | |
| 80 | 73 | Random Rubble Stone Masonry laid in 1:6 cement and sand mortar, in breast walls, retaining walls, parapets, scuppers, etc. including supply of all material, labour, T&P and royaltiies etc.(As per PWD Uttarakhand specifications) | 52.11 | cum | |
| 81 | 74 | Brick on edge pavement with straight overburnt bricks laid on edge including preparation of subgrade to prescribed camber and including\nincluding supply of bricks, filling joints with local sand and spreading blinding coat 1cm (3/8") depth of local sand over the entire surface and including\nsupply of supply of all materials, labour and T&P etc. required for proper all complete material\n | 54.05 | Sqm | |
| 82 | 75 | Random Rubble Masonary laid dry in breast wall, retaining wall, parapets,scupper etc. Including supply of all materials, labour,t & p& royality etc, required for proper complition of work.(As per PWD Uttarakhand specifications) | 20.7 | cum | |
| 83 | 76 | H.P stone filling in back of wallls including cost of all materials ,royality.t&p etc. complete.. | 1.35 | cum |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
