| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 27-May-2021 | Corrigendum No 01 | Date | 14-06-2021 |
| 2 | 03-Jun-2021 | Corrigendum No 2 | Date | 19-06-2021 |
| 3 | 09-Jun-2021 | Corrigendum No 03 | BOQ | 22-06-2021 |
| 4 | 15-Jun-2021 | Corrigendum No 04 | Other | 22-06-2021 |
| 5 | 22-Jun-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 29-06-2021 |
| 6 | 28-Jun-2021 | Corrigendum No 05 | Date | 15-07-2021 |
| Name of Work: ADDITION/ALTERATION/UPGRADATION OF SELECTED JCOs/OR MARRIED ACCOMMODATION AT GANDHINAGAR (JOB NO AMWP/GNR/01/2020-2021) | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Removing existing water profing membrane treatment /tarfelt roof treatment except concrete padding roughening of concrete surface cleaning and washing down the surfaces with water and removing debrish/rubbish material to a distance exc. 1.5 Km but not exc. 5.0 KM out side MD land complete all as specified and directed. Note : This item shall be carried out at places where demolition of PCC padding is not involved . Wherever demolition of PCC padding under the existing water proofing membrane /tarfelt roof treatment is involved the taking down of the roof treatment membrane etc shall be measured and deemed included with demolition of PCC. | 1000 | SQM | |
| 2 | 2 | Demolition of cement concrete of any desription and in any position not otherwise specifically provided for. | 90 | CUM | |
| 3 | 3 | M&L for cement concrete (1:2:4), type B0, using 12.5mm graded stone aggregate in roof paddings to fill the existing depressions etc and to obtain desired slopes etc and as in roof kerbs coving coved fillets of 75mm radius at junction roof slab and parapet wall, vertical surfaces and like etc complete all as specified and directed, | 8.76 | CUM | |
| 4 | 4 | Supply only, liquid water proofing compound mixed as per manufacturer instructon mixed in cement concrete or cement mortar complete all as specified and directed. | 355.413 | LTR | |
| 5 | 5 | Supply, hoisting and fixing in position in repairs, 500 litres capacity rotational moulded polyethylene water storage tank triple layered (cylindrical, vertical with closed top) including dismantling of old PVC/AC water storage tank of 500 liter capacity complete all as specified and directed. | 30 | EACH | |
| 6 | 6 | Disconnecting, setting aside (or lowering if required) and Cleaning & removing all scale and dirt etc from HDPE water tanks of 500 litres capacity (Tanks placed on top of roof) and from mouths of circulating pipes etc including washing the tank with bleaching powder and hoisting, reconnecting and re-fixing in position including writing the date of cleaning of tank with synthetic enamel (black/white) paint of size not less than 10cm of each letter complete, all as specified and directed. | 46 | EACH | |
| 7 | 7 | S&F, 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.(Minimum weight -210 Gms) complete, all as specified and directed. | 76 | EACH | |
| 8 | 8 | M&L, for carrying out water proofing treatment to non accessible roof slabs in the following stages :-\n(i) M&L for 10-12 mm thick rendering layer of CM 1:3 cement mixed with integral water proofing Liquid as per manufacturers instructions over the existing roof surfaces or PCC padding and finishing the surfaces even and smooth \n(ii) Applying one coat of cold bituminous primer @ 0.30 litre/sqm conforming to IS-3384, over the cement rendering surfaces and laying APP based polyster modified membrane reinforced non wooven polyster of 3.50 Kg/Sqm (minimum), 3mm thick with plain polythene finished and sealing all the overlap 75mm in length side and 100mm in width side of membrane by torch application. \n(iii) Finally applying one coat of aluminium paint over membrane all as specified and directed . | 2800 | SQM | |
| 9 | 9 | Removing rubbish to a distance exc. 1.5 Km but not exc. 5.0 Km out side MD land complete all as specified and directed. | 464.556 | CUM | |
| 10 | 10 | Opening the separated portion at the junction of RCC and masonary where ever directed and indicated into 'V' grooves 2" to 3" from the either side of cracks by carefully , marking the areas to be opened up using cutting machine and skillfully / carefully chiselling with a well sharpened chisel and hammer as directed including wire brushing and washing of concrete substrats and masonary walls with water jet to the surfaces thus prepared to the entire satisfaction of the Engineer in charge and as directed. | 500 | RM | |
| 11 | 11 | Moistening the cracks, providing and applying priming / bonding coat of slurry made out of "Polyalk EP" and cement (or equivalent as specified in the List of Brand name) in propportion 1:1 to surface prepare d as instructed and directed.Filling the cracks / grooves by providing and applying "Polyalk EP" polymer modfied cement mortar (or equivalent as specified in the List of brand Name) in proportion 1:5:15 (Polyalk EP : Cement : Graded sand / quartz sand ) on the prepared surfaces and finishing it in level with the existing plaster including hand packing , curing and making the surface similar to the external plastering using wooden floats /punch etc complete all as specified and directed. | 500 | RM | |
| 12 | 12 | Drilling holes of required size upto 50 mm depth in concrete and cleaning the same as directed. | 500 | EACH | |
| 13 | 13 | Providing and fixing,12 mm diameter aluminium /PVC injection nipplees and securing the same as directed & providing and injecting cementeous grout using CEBX-112 addiitve of 'Fosroc' @ of 225 grames per bag of cement and using suitable mechanical gum/pump including mixing etc complete. | 500 | EACH | |
| 14 | 14 | Providing and fixing epoxy dipped shear keys of 10 mm dia and 4' to 6' length in column/downward facia/RCC parpet wall before jacketing, micro concreting as per manufacturer's instructions and direction. | 200 | EACH | |
| 15 | 15 | S&F mild steel TMT bar 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips. | 1500 | KG | |
| 16 | 16 | Providing and laying super fluid micro concrete - roffe cree repairs ( or equivalent as specified in the list of brand name ) in beams bottom, columns, slabs etc including mixing with 5 mm to 10 mm size aggregates with and including required for support waterproof ply wood / steel plate shuttering, pouring, tempering and applied as per maufacturer instruction. Note : this item shall be paid on actual consumption of micro concrete. | 5000 | KG | |
| 17 | 17 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. | 6.9 | CUM | |
| 18 | 18 | M&L for Brick work with sub class 'B' bricks, straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed. | 2 | CUM | |
| 19 | 19 | M&L for Brick work with old size, sub class 'B' bricks, straight or curved on plan any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed. | 43 | SQM | |
| 20 | 20 | Taking up or down steel tubing and connections, including cleaing for refixing or removal to sorore, complete all as specified and directed for the following bores of pipe:- | |||
| 21 | 20.01 | (a) 15mm | 1036 | RM | |
| 22 | 20.02 | (b) 20mm | 740 | RM | |
| 23 | 20.03 | (c) 25mm | 740 | RM | |
| 24 | 21 | S&F steel water tubes, medium grade, galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed for the following bores of pipe:- | |||
| 25 | 21.01 | (a) 15mm | 740 | RM | |
| 26 | 21.02 | (b) 20mm | 592 | RM | |
| 27 | 21.03 | (c) 25mm | 481 | RM | |
| 28 | 22 | Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) complete all as specified and directed for the following bores of pipe:- | |||
| 29 | 22.01 | (a) 15mm | 296 | RM | |
| 30 | 22.02 | (b) 20mm | 148 | RM | |
| 31 | 22.03 | (c) 25mm | 259 | RM | |
| 32 | 23 | S&F, Gun metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe for 25 mm bore of pipe complete all as specified and directed. | 76 | EACH | |
| 33 | 24 | S&F, Gun metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe for 20 mm bore of pipe complete all as specified and directed. | 76 | EACH | |
| 34 | 25 | M&L for Demolition of reinforced cement concrete of RCC roof tank/ shelves etc complete all as specified and directed. | 27.816 | CUM | |
| 35 | 26 | Taking down of old soil waste pipes PVC or Cast iron incl fittings fixed to walls or laid in floors etc complete and removal of rubbish outside def land for 100/110 mm bore . \nNote : Credit shall be recovered as per the rates given for Old PVC scrap and Old iron scrap as applicable in schedule of credit. | 263.55 | RM | |
| 36 | 27 | Taking down of old soil waste pipes PVC or Cast iron incl fittings fixed to walls or laid in floors etc complete and removal of rubbish outside def land for 50/75 mm bore \nNote : Credit shall be recovered as per the rates given for Old PVC scrap and Old iron scrap as applicable in schedule of credit. | 786.8 | RM | |
| 37 | 28 | S&F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack clamp complete all as specified and directed. | 469.8 | RM | |
| 38 | 29 | S&F, 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches or floors complete all as specified and directed. . | 317 | RM | |
| 39 | 30 | S&F, 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack clamp complete all as specified and directed. | 160.95 | RM | |
| 40 | 31 | S&F, 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches or floors complete all as specified and directed. | 102.6 | RM | |
| 41 | 32 | S&F, 75mm bore PVC (SWR) bend, any radius provided with access door complete all as specified and directed. | 222 | EACH | |
| 42 | 33 | S&F, 75 mm bore PVC (SWR)junction single , (Single T) equal or unequal provided with access door complete all as specified and directed. | 114 | EACH | |
| 43 | 34 | S&F, 110mm bore PVC (SWR) bend, any radius provided with access door complete all as specified and directed. | 38 | EACH | |
| 44 | 35 | S&F, 110 mm bore PVC (SWR)junction single , (Single T) equal or unequal provided with access door complete all as specified and directed. | 38 | EACH | |
| 45 | 36 | S&F, 75 mm outer dia PVC SWR floor trap as in repair with grating including jointing with solvent cement | 152 | EACH | |
| 46 | 37 | S&F, PVC (SWR) gully trap 125/110 mm settting and jointing with solvent cement as in repair. | 30 | EACH | |
| 47 | 38 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed. | 5984.48 | SQM | |
| 48 | 39 | Demolition of PCC as in floors and bedding layer under tiles any description and thickness etc | 100 | CUM | |
| 49 | 40 | M&L, for 20 mm thick plain cement concrete 1:2:4 type B0 using 12.5 mm graded crushed stone aggregate as in sub-floors, sub-bases, floors and pavings, etc. complete all as directed.\nNote : This item shall only be executed wherever required after the approval of Engineer in charge.\n\n | 3543.28 | SQM | |
| 50 | 41 | M&L, for glazed ceramic coloured tiles of size 300 x 450mm x 7mm on vertical surface such as walls, skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including rendering 10mm thick in cement mortar (1:3) , complete all as specified and directed. | 2130.74 | SQM | |
| 51 | 42 | M&L, for coloured non skid ceramic tiles, 7 to 8 mm thick, (square/rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm laid as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of 15 mm thick cement mortar (1:4) complete all as specified and directed. | 3543.28 | SQM | |
| 52 | 43 | M&L, for coloured non skid ceramic tiles, 7 to 8 mm thick, (square/rectangular), area of each tile exceeding 0.11 sq.m but not exceeding 0.18 sqm fixed as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and directed. | 310.462 | SQM | |
| 53 | 44 | M&L, for 75 mm thick plain cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub base of flooring/hard standing complete all as specified and directed. | 1000 | SQM | |
| 54 | 45 | M&L, of sand cushioning thickness as directed for laying interlocking paver block complete all as directed | 25 | CUM | |
| 55 | 46 | M&L, for Machine pressed precast conctete interlocking paver block rubber moulded Lacquer coated any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed | 1000 | SQM | |
| 56 | 47 | M&L, for 75 mm thick cement concrete 1:3:6 type C1, using 20mm graded stone aggregate as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement, Joints of plinth protection shall be filled with bitumen mastic (1:3) complete all as specified and as directed. | 1000 | SQM | |
| 57 | 48 | M&L, Forming construction joint 30 mm deep x 10 mm wide filled with sealing compound Grade'A' complete all as specified | 48.33 | Per 10 RM | |
| 58 | 49 | M&L for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. | 131.514 | SQM | |
| 59 | 50 | S&F, in repair, stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. | 50 | SQM | |
| 60 | 51 | M&L machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing,cutting and mirror polishing complete with and including 20 mm thick screed bed layer of CM (1:6) all as specified & directed | 255.55 | SQM | |
| 61 | 52 | M&L Kota stone slab 10-15mm thick fixed as in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing polishing mirror finish surface with and including rendering 10mm thick in cement mortar (1:4) , complete all as specified and directed. | 39.9 | SQM | |
| 62 | 53 | Taking down cement plaster on brick or stone wall etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed. | 5500 | SQM | |
| 63 | 54 | M&L, for rendering cement plaster 15mm thick in two layers , First Layer of 10 mm thick in CM 1:6 finished even and rough and second layer of 5 mm thick in CM 1:4 finished even and fair incl using integral water proofing liquid in top layer as per mfr instructions in cement mortar (1:4) with liquid water proofing compound on brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. \nNote: WPC shall be measured and paid separately. | 2000 | SQM | |
| 64 | 55 | M&L, for rendering cement plaster 10mm thick in cement mortar (1:6) on brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. | 2000 | SQM | |
| 65 | 56 | M&L, for rendering cement plaster 5mm thick in cement mortar 1:3 on fair faces of concrete as in ceilings, chajjas, fins facia etc. finished even and smooth without using extra cement complete all as specified and directed. | 1500 | SQM | |
| 66 | 57 | M&L, for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of white cement as primer complete all as specified and directed. | 2000 | SQM | |
| 67 | 58 | M&L, for preparing old plastered or un-plastered surfaces of wall and applying one coat of cement base paint complete all as specified and directed. | 4873.66 | SQM | |
| 68 | 59 | M&L, preparing new plastered surfaces of wall and applying two coats of oil bound distemper over a layer of white cement based wall care putty complete all as specified. | 2000 | SQM | |
| 69 | 60 | M&L, preparing old plastered or unplastered surfaces of wall and applying one coat of oil bound distemper complete all as specified. | 13923.7 | SQM | |
| 70 | 61 | M&L for preparing new plastered or un-plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed. | 1500 | SQM | |
| 71 | 62 | M&L, for preparing old plastered or un-plastered ceiling surfaces and applying one coat of white wash complete all as specified and directed. | 3381.31 | SQM | |
| 72 | 63 | M&L, for 35mm thick precast cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in louvers or jallies (measured solid), including all mouldings but excluding frame, set in cement mortar (1:4) complete all as specified and directed. | 57 | SQM | |
| 73 | 64 | M&L, for preparation of old wooden surface of any description, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. | 200 | SQM | |
| 74 | 65 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sqm each complete all as specified and directed. | 148 | EACH | |
| 75 | 66 | Taking down chowkhats or frame ( Without shutters) n.exc 1.5 sqm each only | 20 | EACH | |
| 76 | 67 | Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sq.m but not exc. 4 sq.m each complete all as specified and directed. | 314 | EACH | |
| 77 | 68 | Taking down chowkhats or frame ( Without shutters) exc 1.5 sqm but n exc 4 sqm each only | 40 | EACH | |
| 78 | 69 | Taking down shutters of any description n. exc 1 sqm each complete all as specified and directed | 304 | EACH LEAF | |
| 79 | 70 | Taking down shutters and refixing of shutters in same openig of any description n.exc 1 sqm each | 20 | EACH LEAF | |
| 80 | 71 | Taking down shutters of any description exc 1 sqm and n. exc 2 sqm each complete all as specified and directed | 342 | EACH LEAF | |
| 81 | 72 | Taking down shutters and refixing of shutters in same openig of any description exc 1 sqm & n. exc 2 sqm each | 40 | EACH LEAF | |
| 82 | 73 | S&F, 35 mm thick, 2nd class hard wood, factory made, glazed & skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. Sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and directed. | 656.76 | SQM | |
| 83 | 74 | S&F, 35 mm thick 2nd class hard wood plain framed panelled shutter (two panel) with lock rail and panel of 12 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (Part -I), Klin seasoned and chemically pressured treated and complete all as specified and directed. | 492.18 | SQM | |
| 84 | 75 | S&F, factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site complete all as specified and directed. | 36.582 | SQM | |
| 85 | 76 | S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube and fixing in opening as per specifications complete all as specified and directed. | 695.6 | RM | |
| 86 | 77 | S&F, for fabrication of press steel cup board shutter using 1.0 mm thick M S plain sheet and with frame 1.25 mm thick bent to shape with and including two coats of synthetic enamel paint on internal surface & two coats of synthetic enamel paint wooden grain pattern on external surfaces along with locking arragement (mortice lock handle with a set of two keys) complete all as per drg CEBZ/TD/12/2008 including taking out old prelaminted board shutter | 275 | SQM | |
| 87 | 78 | S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed complete all as specified and directed | 1100 | EACH | |
| 88 | 79 | S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed | 296 | EACH | |
| 89 | 80 | S&F, in repair, aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed complete all as specified and directed | 10 | EACH | |
| 90 | 81 | S&F, aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300 mm and fixed complete all as specified and directed. | 222 | EACH | |
| 91 | 82 | S&F, in repair, aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300mm and fixed complete all as specified and directed. | 45 | EACH | |
| 92 | 83 | S&F, butt hinges (ISI Mark), medium weight, cold rolled, mild steel of size 100 mm complete all as specified and directed. | 1638 | EACH | |
| 93 | 84 | S&F, in repairs, butt hinges (ISI MarK), 100mm size, medium weight, cold rolled including welding where required complete all as specifed and directed. | 50 | EACH | |
| 94 | 85 | S&F, stainless steel butt hinges (ISI MarK) of size 100mm complete all as specified and directed. | 444 | EACH | |
| 95 | 86 | S&F, single action spring hinges (ISI MarK), mild steel with steel wire spring, stove enameled black, size of spring hinge 150mm all as specified and directed. | 164 | EACH | |
| 96 | 87 | S&F, in repair, single action spring hinges (ISI MarK), mild steel with steel wire spring, stove enameled black, size of spring hinge 150mm all as specified and directed. | 40 | EACH | |
| 97 | 88 | S&F, for rolled mild steel angle iron (ISI Mark ) work with using 40 x 40x 5 mm size angle or as required as in door frames complete, drilled for fixing of hinges etc. also fastening and fixing conforming to Fe-290 (Gde-E-165) complete all as specified and directed. | 5971.2 | KG | |
| 98 | 89 | M&L for preparation of new wooden surface of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. | 2452.32 | SQM | |
| 99 | 90 | S&F extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed. | 1924 | EACH | |
| 100 | 91 | S&F, in repair, extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed. | 40 | EACH | |
| 101 | 92 | M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over existing shop coat of primer complete all as specified and directed. | 168.688 | SQM | |
| 102 | 93 | M&L two coats of black japan paint over a coat of red oxide primer with preparation of new steel surfacs of small articles such as holdfast etc complete al as specified and directed. | 11.88 | Per 100 Nos | |
| 103 | 94 | Taking down mild steel doors/window/ventilator inculding grill if any of any description n. exc 1.00 Sqm each complete all as specified and directed | 300 | EACH | |
| 104 | 95 | Taking down mild steel doors/window/ventilator inculding grill if any of any description exc 1.00 sqm each complete all as specified and directed | 306 | EACH | |
| 105 | 96 | S&F, Aluminium anodised doors/ windows/ ventilators with one or more rebates including joining cleat for fixing etc complete with frames, shutters and grills of size directed by Engineer-in-charge including handles, tower bolts, grills, etc complete all as specified and directed. \nNote:- Floor door spring, sheet glass, wire cloth, lock, etc shall be measured and paid seperately. | 6497.04 | KG | |
| 106 | 97 | S&F, 5mm thick, black tinted glass panes fixed to aluminium doors/windows/vents with necessary rubber gaskets complete all as specified and directed. | 524.24 | SQM | |
| 107 | 98 | S&F, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. | 526.84 | SQM | |
| 108 | 99 | M&L for 15 to 16 mm thick black granite stone slab (table rubbed and polished) laid as in cooking platform ,steps, jambs, pillars, window cills over and including 10 mm thick screed bed in CM (1:4) and set with neat cement slurry including pointing in white cement (1:2) using marble dust with admixture and pigment to match with the shade of granite. | 272.808 | SQM | |
| 109 | 100 | Rounding to edges of granite stone slabs one edge, such as steps, cooking platform, and at other similar situations complete all as specified and directed. | 719.6 | RM | |
| 110 | 101 | S&F, in repair kitchen sink with drainage board made of stainless steel 1mm thick including supply and fix 32mm CP waste coupling, plug, washer, 32 mm bore and 60cm long PVC waste pipe including cantilever brackets made of mild steel angle iron 30x30x4mm and flat iron 25x3mm both duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, cutting for and pinning in ends of brackets to errecting stand into wall and making good disturbed portion in cement mortar 1:2 or in PCC 1:2:4, type B-1 using 20mm graded stone aggregate and connecting union to pipe, over all size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed. | 76 | EACH | |
| 111 | 102 | S&F, in repairs, 18mm thick, PVC sheet one side prelaminated of approved texture ("Celuca Ply of Rajshree make or equivalent in "Sintex" as approved by GE) as in Kitchen cabinet (with shelves and partitions) including necessary fittings & fixtures as per manufacturer's instructions complete all as specified and directed. | 732.72 | SQM | |
| 112 | 103 | Cutting chases, pinning in, making good to facings for concealed water tubing etc. cutting exceeding 10cm but not exceeding 20cm girth complete all as specified and directed. | 740 | RM | |
| 113 | 104 | S&F,in repair Angle cock, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for unions of 15mm bore complete all as specified and directed. | 296 | EACH | |
| 114 | 105 | S&F, in repair, 32mm bore, low density polyethelene pipe (LDPE) of pressure rating 6kgf/sq.cm fixed to walls, ceilings or in floors etc. complete all as specified and directed. | 51.8 | RM | |
| 115 | 106 | S&F, in repair, corner glass shelf with CP brackets and with decorative railing fixed to wall complete all as specified and directed. \nMake : Jaquar, Cera & Prayag or equivalent make | 76 | EACH | |
| 116 | 107 | S&F, in repair, Grating, square, 150mm size of PTMT (minimum weight 100gms) complete all as specified and directed.\nMake : Prayag | 152 | EACH | |
| 117 | 108 | S&F, in repair, vitreous china squatting pan, 'Orissa’ pattern, white of size 580mm x 440mm with integral foot rest (excluding flushing cistern and flush pipe) but including cleaning the sunken portion of WC by demolition and removalof old concrete and provn of new lean cement concrete 1:5:10 type E 2 using 40 mm graded stone aggregate ,finished even and smooth complete all as specified and directed. | 76 | EACH | |
| 118 | 109 | Supply Only 10 litres capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets and connection to pipe or lever etc. complete all as specified and directed. ( Fixing included in the rates of Fixing of WC) | 76 | EACH | |
| 119 | 110 | M&L for water proofing of sunken portion consisting under mention items :-\n(i) 15 mm thick plastering in C:M 1:3 with liquid WPC at all around and base of sunken floor with proper slope.\n(ii) Applying a coat of bitminous primer @ 0.30 litre/sqm and conforming to IS-3384, laying APP based polyster modified membrane reinforced non wooven polyster of 3.50 Kg/Sqm (minimum), sealed by torching complete all as specified and directed. | 38 | EACH | |
| 120 | 111 | S&F in repair, 600mm x 450mm beveled edge mirror of selected quality glass not less than 5.5mm thick, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. | 74 | EACH | |
| 121 | 112 | S&F, in repair, vitreous china wash hand basin, white, flat back of size 550mm x 400mm including brackets grouted in cement mortar 1:2 in wall complete all as specified and directed. \nNote :- Supply only pillar taps, waste fittings, PVC connection, PVC waste pipe shall be measured and paid separately. | 74 | EACH | |
| 122 | 113 | Supply only, 32mm, waste fittings, brass chromium plated for glazed ware sink, basins, etc. with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. | 74 | EACH | |
| 123 | 114 | S&F, in repair, brass chromium plated shower rose with or without swivel joint, 125mm size complete all as specified and directed. | 74 | EACH | |
| 124 | 115 | S&F pillar taps cast copper alloy with capstan head, chromium plated, screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly nuts, screwed for iron pipes 15mm bore complete all as specified and directed. | 74 | EACH | |
| 125 | 116 | Supply and fixing PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed. | 304 | EACH | |
| 126 | 117 | S&F, CP brass bib cock ,capstan head, screwed down or up suitable for iron pipe or brass ferrule of 15mm bore complete all as specified and directed. | 380 | EACH | |
| 127 | 118 | Supply only PVC waste pipe 32mm bore of size 450mm to 600mm long complete all as specified and directed. | 74 | EACH | |
| 128 | 119 | Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc. 15cm thickness (below or above ground level) all as specified and directed. | 149.155 | CUM | |
| 129 | 120 | - Ditto -all as above item No 119 but above ground level | 145.24 | CUM | |
| 130 | 121 | S&F,25 mm dia,1mm thick stainless steel fancy type decorative curtain rod (As per Sample) fix with wooden gutties giving smooth finish to surface using white(putty or cement) complete all as specified and directed. | 1265.2 | RM | |
| 131 | 122 | S&F,Stainless steel decorative ball type side bracket including roller stopper for 25 mm dia curtain rod as per sample | 1004 | EACH PAIR | |
| 132 | 123 | S&F, in repairs Tower rail 450mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed. | 76 | EACH | |
| 133 | 124 | S&F, in repair, chromium plated, Soap dish holder of prayag or equivalent make, complete all as specified and directed. | 76 | EACH | |
| 134 | 125 | M&L, grouting 25mm thick under stanchion bases or grillages , etc.including any temporary shuttering to edges with cement mortar 1:2 complete all as specified and directed. | 40.15 | SQM | |
| 135 | 126 | S&F SS pipe of different dia & sections for railing grouting on RCC wall at stair case of grade 315 complete all as specified and directed. | 572.219 | KG | |
| 136 | 127 | S&F, Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1998 grade St.-240 | 2234 | KG | |
| 137 | 128 | S&F, in stainless steel plate rack rack of size 1200x900x100 mm with 0.63 mm thick stainless steel sheet, wall mounted type complete all as specified. | 76 | EACH | |
| 138 | 129 | S & F in repairs chromium plated, with long shank and cup (concealed type) 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as directed. | 76 | EACH | |
| 139 | 130 | S&F, Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified | 90 | SQM | |
| 140 | 131 | M&L, RCC 1:1.5:3 (using 20 mm graded crushed stone aggregate) for slabs suspended on walls, beams and columns, in floors, roofs, landings and in shelves and the like. | 1.7865 | CUM | |
| 141 | 132 | Rough finished flat form work to soffits of suspended slabs such as roof slabs, floor slabs and similar work not exce 200 mm thick. | 23.82 | SQM | |
| 142 | 133 | Rough finished flat Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 5 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide | 12 | RM | |
| 143 | 134 | M&L post construction anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors | 1771.64 | SQM | |
| 144 | 135 | M&L cement concrete 1:2:4 type B2 using 40 mm graded stone aggregate as in surface channels and drains etc. | 101.25 | CUM | |
| 145 | 136 | M&L extra for fair finish drain or channel 30 cm inner girth in cement conctrete using extra cement including forms,moulds,mitered/stoped ends etc. | 1000 | RM | |
| 146 | 137 | Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth for foundation of pole, laying of cables etc in soft/loose soil and getting out complete all as specified and directed. | 488 | CUM | |
| 147 | 138 | Returning, filling in, including spreading, leveling, watering and well ramming in layer not exc 25 cm with soil obtained from excavation complete all as specified and directed. | 279 | CUM | |
| 148 | 139 | M&L for providing dry river sand as in sand cushioning to UG cable including punning gently all as directed. Note: Depth after punning shall be measured and paid. | 132 | CUM | |
| 149 | 140 | Removing excavated material (Soil) not exc 50 mtr and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed. | 209 | CUM | |
| 150 | 141 | Supply and laying sub class 'B' burnt bricks, size of brick 230x115x75mm, laid as cable protection cover complete all as specified and directed. | 14.82 | 1000 Nos | |
| 151 | 142 | Takiing out old unserviceble under ground LT cables and connections including pipes, bricks or precast concrete cable cover etc any type from trenches/walls/poles of the following cross sectional area :- | |||
| 152 | 142.01 | 120 sqmm 3.5 core | 20 | RM | |
| 153 | 142.02 | 95 sqmm 3.5 core | 20 | RM | |
| 154 | 142.03 | 50 sqmm 3.5 core | 680 | RM | |
| 155 | 142.04 | 25 sqmm 4 core | 145 | RM | |
| 156 | 142.05 | 16 sqmm 4 core | 985 | RM | |
| 157 | 143 | Supplying & laying, XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire heavy duty underground cable with aluminium multi stranded conductor, 1100 volt grade,of size 120 Sqmm 3.5 core, laid in trenches/duct, passing through pipe/duct or fixed on pole and connecting and testing complete all as specified and directed. | 20 | RM | |
| 158 | 144 | Supplying & laying, XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire heavy duty underground cable with aluminium multi stranded conductor, 1100 volt grade,of size 95 Sqmm 3.5 core, laid in trenches/duct, passing through pipe/duct or fixed on pole and connecting and testing complete all as specified and directed. | 20 | RM | |
| 159 | 145 | Supplying & laying, XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire heavy duty underground cable with aluminium multi stranded conductor, 1100 volt grade,of size 50 Sqmm 3.5 core, laid in trenches/duct, passing through pipe/duct or fixed on pole and connecting and testing complete all as specified and directed. | 680 | RM | |
| 160 | 146 | Supplying & laying, XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire heavy duty underground cable with aluminium multi stranded conductor, 1100 volt grade,of size 25 Sqmm 4 core, laid in trenches/duct, passing through pipe/duct or fixed on pole and connecting and testing complete all as specified and directed. | 145 | RM | |
| 161 | 147 | Supplying & laying, XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire heavy duty underground cable with aluminium multi stranded conductor, 1100 volt grade,of size 16 Sqmm 4 core, laid in trenches/duct, passing through pipe/duct or fixed on pole and connecting and testing complete all as specified and directed. | 985 | RM | |
| 162 | 148 | Supply, installation, commissioning and testing, in repair, feeder pillar board, LT (415 Volts, 50 Hz , 3-phase, 4 wire supply),CPRI approved, plinth mounted, factory made, CPRI approved, outdoor type, weather and vermin proof (Protection Class IP-54) made out of 50mm x 50mm x 5mm angle iron frame and 3.15 mm thick MS Sheet CRCA sheet powder coated with front & back hinged opening, rubber lining, locking arrangement, painted externally and internally with two coats of synthetic enamel gray paint (First Quality) over a coat of red oxide primer, grouting panel through angle iron, 0.2mtr in ground and 0.5 mtr over the ground including excavation & earth work in any type of soil and PCC (1:3:6) type C-2 using 40mm graded stone aggregate complete comprising of the followings:- (a) Incoming supply:- (i) Aluminium bus bar chamber 160 amps rating of 04 strip - 01 No (ii) MCCB, thermal and magnetic setting, 4 pole, AC, 415volts, 100 Amp rating, 25 KA rupturing capacity - 01 No (iii) Multifunction meter showing PF, V, I, Hz, Etc (v) Indicating lamp Neon type for R-Y-B - 3 Nos (b) Outgoing supply:- (i) MCCB, thermal and magnetic setting, 3 pole, AC, 415volts, 63 Amp rating, 16 KA rupturing capacity - 03 Nos(ii) MCB SPN 10A-02 Nos. | 5 | EACH | |
| 163 | 149 | Supply, installation, commissoning and testing, in repair, LT Panel (415 Volts, 50 Hz , 3-phase, 4 wire supply), plinth mounted, factory made, CPRI approved, outdoor type, weather and vermin proof (Protection Class IP-54) made out of 50mm x 50mm x 5mm angle iron frame and 3.15 mm thick MS Sheet CRCA sheet powder coated with front & back hinged opening, rubber lining, locking arrangement, painted externally and internally with two coats of synthetic enamel gray paint (First Quality) over a coat of red oxide primer, grouting panel through angle iron, 0.2 mtr in ground and 0.5 mtr over the ground including excavation & earth work in any type of soil and PCC (1:3:6) type C-2 using 40mm graded stone aggregate complete comprising of the followings:- (a) Incoming supply:- (i) Aluminium bus bar chamber 160 amps rating of 04 strip - 01 No (ii) MCCB, thermal and magnetic setting, 4 pole, AC, 415volts, 100 Amp rating, 25 KA rupturing capacity - 01 No (iii) Multifunction meter showing PF, V, I, Hz, Etc (v) Indicating lamp Neon type for R-Y-B - 3 Nos (b) Outgoing supply:- (i) MCCB, thermal and magnetic setting, 3 pole, AC, 415volts, 63 Amp rating, 16 KA rupturing capacity - 05 Nos(ii) MCB SPN 10A-02 Nos. | 1 | EACH | |
| 164 | 150 | Supply, installation, commissioning and testing, in repair, LT Panel (415 Volts, 50 Hz , 3-phase, 4 wire supply), plinth mounted, factory made,CPRI Approved, outdoor type, weather and vermin proof (Protection Class IP-54) made out of 50mm x 50mm x 5mm angle iron frame and 3.15 mm thick MS Sheet CRCA sheet powder coated with front & back hinged opening, rubber lining, locking arrangement, painted externally and internally with two coats of synthetic enamel gray paint (First Quality) over a coat of red oxide primer, grouting panel through angle iron, 0.5 mtr in ground and 0.2 mtr over the ground including excavation & earth work in any type of soil and PCC (1:3:6) type C-2 using 40mm graded stone aggregate complete comprising of the followings:-(a) Incoming supply:- (i) Aluminium bus bar chamber 160 amps rating of 04 strip - 01 No (ii) MCCB, thermal and magnetic setting, 4 pole, AC, 415volts, 100 Amp rating, 25 KA rupturing capacity - 01 No (iii) Multifunction meter showing PF, V, I, Hz, Etc (v) Indicating lamp Neon type for R-Y-B - 3 Nos (b) Outgoing supply:- (i) MCCB, thermal and magnetic setting, 3 pole, AC, 415volts, 63 Amp rating, 16 KA rupturing capacity - 04 Nos(ii) MCB SPN 10A-02 Nos. | 1 | EACH | |
| 165 | 151 | M&L, for earthing complete with galvanized iron earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m deep below normal ground connected to GI earth strip of 32 mmx6mm thick up to 7.5 m lengh by means of bolts nuts check nuts and washer of galvanized steel all as shown the electrical plate No 5 of SSR part-I etc, necessary earth work,excavation PCC chamber cover with handle (PCC 1:2:4) incl 32mm dia GI pipe of medium grade for watering and 20mm dia GI pipe of light grade for protection of earthing lead ,wire mesh, funnel, charcoal dust,common salt,copper lugs etc including taking out old earthing all as specified and directed testing on completion all as specified and directed. | 4 | Each Set | |
| 166 | 152 | M&L, in repairs, earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6mm thick buried directly in ground [earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth wire of 4mm dia upto 7.5 m length by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SSR Part I all as specified and testing on completion including provision of earth lead protected by 15 mm dia light grade GI pipe & watering pipe shall be 20 mm bore medium grade GI pipe including all excavation and earth work in any type of soil, PCC pit with RCC cover, char coal, salt, funnel etcincluding taking out old earthing complete all as specified and directed . testing on completion all as specified and directed. | 19 | Each Set | |
| 167 | 153 | Taking up and down unserviceable steel tubing inculding connections 40/50 mm bore from tenches/wall/floor/ceiling/poles etc all as specified and directed | 60 | RM | |
| 168 | 154 | Supply and laying GI pipe 40mm dia light grade laid below road / fixed to along the poles / walls with necessary clamping, including encasing the cable into the pipe all as specified and directed. | 40 | RM | |
| 169 | 155 | Supply and laying GI pipe 50mm dia light grade laid below road / fixed to along the poles / walls with necessary clamping, including encasing the cable into the pipe all as specified and directed. | 20 | RM | |
| 170 | 156 | Taking down carefully copper/aluminum point wiring (light, fan,socket or power) complete,including fixture and fitting such as as switches, ceiling roses, pendants, regulators, sockets,etc excluing light fittings etc,removing materials to store for keeping in safe custudy or for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surface of walls, ceiling, floor etc to match with the existing surface. | 2208 | PER POINT | |
| 171 | 157 | M&L for wiring with and including multi stranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLHS cable, 1100 volts grade, ISI marked with valid CML number, drawing through in and including medium grade, rigid non metallic, PVC concealed conduit of 20mm bore and including cutting chases for conduits and sunken boxes, its accessories & including with multi stranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLHS cable, green colour, 1100 volts grade, ISI marked with valid CML number as continuity earth wire terminating with provision sunken concealed terminal boxes complete all as specified and directed for the following :- | |||
| 172 | 157.01 | (a) One light/fan point controlled by one ,one way switch | 1378 | PER POINT | |
| 173 | 157.02 | (b) One multi purpose 3 pin socket 5 Amps, Independent board. | 244 | PER POINT | |
| 174 | 157.03 | (c) One multi purpose 3 pin socket 5 Amps, on the same board. | 244 | PER POINT | |
| 175 | 157.04 | (d) One light point controlled by two way switches. | 38 | PER POINT | |
| 176 | 157.05 | (e) One bell buzzer point controlled by one push buttons independent | 76 | PER POINT | |
| 177 | 158 | M&L for wiring with and including multi stranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLHS cable, 1100 volts grade, ISI marked with valid CML number, drawing through in and including medium grade, rigid non metallic, PVC concealed conduit of 20mm bore and including cutting chases for conduits and sunken for boxes, its accessories & including with multi stranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLHS cable, green colour, 1100 volts grade, ISI marked with valid CML number as continuity earth wire terminating with provision of sunken concealed terminal boxes complete all as specified and directed for the following :- | 228 | PER POINT | |
| 178 | 159 | S&F switch piano, flush button single pole, one way 5 Amps complete all as specified and directed | 1866 | EACH | |
| 179 | 160 | S&F switch piano, flush button single pole, 2 way 5 Amps complete all as specified and directed | 76 | EACH | |
| 180 | 161 | S&F socket outlet 2 in1, 3 pin, 5 Amps, flush type complete all as specified and directed | 488 | EACH | |
| 181 | 162 | S&F socket outlet multipurpose, 3 pin, 5 &15 Amps flush type complete all as specified and directed | 228 | EACH | |
| 182 | 163 | S&F switch piano flush type single pole, one way 15 Amps complete all as specified and directed | 228 | EACH | |
| 183 | 164 | S&F Bell push , flush type single pole, 5 Amps complete all as specified and directed | 76 | EACH | |
| 184 | 165 | S&F Ceiling rose, PVC/poly carbonate,isolated body, 65x17 mm three terminals. | 982 | EACH | |
| 185 | 166 | M & L for ceiling fan regulators, Electronic stepped type type, AC, 230 Volts complete. | 244 | EACH | |
| 186 | 167 | S&F lamp holder, insulated body with back plate suitable for batten fittings complete. | 320 | EACH | |
| 187 | 168 | M & L bell electric, Dingdong type A.C. 230 Volts, single pole complete. | 76 | EACH | |
| 188 | 169 | Taking Down U/S DB of any size and capacity complete | 76 | EACH | |
| 189 | 170 | S &F fix in repair Distribution Board SPN 8 way, 240 volts, factory made powder coated, double door with neutral and earth link, suitable for fixing MCB,s complete including connecting. | 76 | EACH | |
| 190 | 171 | Taking out rusted/defective LT panel out door/indoor wall mounted type with all operating mechanism after disconnecting incoming/out going connections for meter complete all as specified and as directed | 19 | EACH JOB | |
| 191 | 172 | Supplying, installation, testing and commissioning, in repair, factory made, CPRI approved LT panel , wall mounted board made out of CRCA sheet of 2 mm thick indoor type totally enclosed weather, dust and vermin proof with front opening hinged door and locking arrangement mounted on MS flat iron (40x6mm and 6" long) 04 No clamp welded to 40 mm x 40 mm x 6 mm size angle iron frame alround panel body duly grouted on wall , 415 volts 3 phase, 4 wire AC 50 HZ having aluminium bus bar 25 mm x 10 mm for phase and the neutral insulated with PVC sleeves, space for fixing single phase KWH electric meter of suitable capacity 04 Nos, copper lugs, spacers, mounting channels, rubber gasket, locking knobs, hylam sheet pieces, PVC shrinkable sleeves, nuts and bolts, washers etc and suitable size single core copper wire connections, suitable compartments and epoxy powder spray paint with primer complete all as specified including the following accessories including taking down old u/s distribution board, taking down and refixing serviceable electric KWH meter in new panel (all as per sample):- INCOMING - \n(a) MCCB 415 Volts, 4 pole, 25 KA breaking capacity of 63 Amps-01 No \n(b) R-Y-B phase, LED indicating lamp - 03 Nos \n(c) 20A/4 amp HRC control fuse with fuse link - 03 Nos \n(d) 200 Amp TPN main aluminium bus bar \nOUTGOING - \n(a) MCB, SPN, 40 Amp, 10 KA = 04 Nos \n(b) Space for mounting single phase energy meter-04 Nos \n(c) copper cable 6 sqmm wire and open terminals for all feeders \nNote (1) Mounting arrangement of panel included in quoted rate.\n(2) Bldg No mentioned in each panel as directed and shall be included in quoted rate. | 19 | EACH | |
| 192 | 173 | Disconnecting and taking down exisiting unservicable MCBs of any capacity completes all as specified and as directed | 532 | EACH | |
| 193 | 174 | Disconnecting and taking down exisiting unservicable light fitting of any size capacity completes all as specified and as directed | 662 | EACH | |
| 194 | 175 | Disconnecting and taking down exisiting unservicable submain wiring of any capacity completes all as specified and as directed | 1007 | EACH | |
| 195 | 176 | S & F in repair MCB’s single pole and neutral, 6 to 32 Amps 240 volts with ‘B’ curve, fixed in sheet metal board complete including connecting. | 456 | EACH | |
| 196 | 177 | S & F in repair MCB’s SPN, 32 Amps 240 volts with ‘C’ curve, fixed in sheet metal board complete including connecting. | 76 | EACH | |
| 197 | 178 | S&F, in repairs, slim LED light fitting, batten type, with poly carbonate round shape diffuser grey end cape housed is in ideal replcement solution with eligently designed in caps, 20 watt complete set flexible three core copper conductor cable of suitable size and testing on completion all as specified and directed. | 358 | EACH | |
| 198 | 179 | S&F, in repairs, slim LED light fitting, batten type, with poly carbonate round shape diffuser grey end cape housed is in ideal replcement solution with eligently designed in caps, 10 watt complete set flexible three core copper conductor cable of suitable size and testing on completion all as specified and directed. | 228 | EACH | |
| 199 | 180 | S&F in replacement sub-main wiring with 2 single core 4 Sqmm PVC insulated, unsheathed, 1100Volts grade, copper multi stranded conductor drawn in and including PVC concealed conduit and conduit assessories including drawing a run of PVC insulated, unsheathed, 650/1100Volts grade, copper conductor multi stranded 4 Sqmm size as continuous earth wire drawn through and connected to main switch/ DB and testing on completion.\nNote: (i). 2 run of main conductor and one run of earth conductor shall be measured as one length. \n(ii) Rates quoted shall be inclusive of cutting wall for concealing conduit and making good the same in cement mortar 1:3. | 1007 | RM | |
| 200 | 181 | Supply and fix in repair LED industrial bulk head luminiare having IP-65 design aluminium die housing and vendal - resistant cover finished in epoxy powder coated housing of capacity 10 watt complete all as specified and directed. | 76 | EACH | |
| 201 | 182 | Taking down existing ceiling fan and depositing in MES store yard for keeping in safe custudy complete all as per specified and directed. | 244 | EACH | |
| 202 | 183 | Hanging only ceiling fan and connecting up including provision of cable from ceiling rose after complition of work complete all as per specified and directed. | 244 | EACH | |
| 203 | 184 | Taking down existing Electric meter and depositing in MES store yard for keeping in safe custudy and refixing the same after completion of work complete all as per specified and directed. | 76 | EACH | |
| 204 | 185 | Taking down existing Geyser and depositing in MES store yard for keeping in safe custudy and refixing the same after completion of work complete all as per specified and directed. | 76 | EACH | |
| 205 | 186 | S&F exhuast fan, steel body AC single phase .230/240 V of size 300mm sweep with, bladesand frame and louvers complete all as specified and directed. | 152 | EACH | |
| 206 | 187 | Cutting opening in cement concrete or other walls (any description) for door, window and other opening( with or wothout reveals) or enlarging exisiting opening , including trimming surface to receive rendering etc | 8 | PER CUBIC METRE |
Copyright © 2021 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
