Military Engineer Services-MES has published Repair And Maintenance Of Roof Sheet , Door/ Window , Sanitary Fittings , Periodical Services And Other B/R Wks At 24 Sikh To 852 Asc At Coy Under Ge Tawang. Submission Date for this Tender is 28-05-2021. Shed Construction Tenders in Tawang Arunachal Pradesh. Bidders can get complete Tender details and download the document.
| NAME OF WORK : REPAIR AND MAINTENANCE OF SANITRY FITTINGS, ROOF SHEET, DOOR/WINDOW, PERIODICAL SERVICES AND OTHER B/R WKS AT 24 SIKH TO 852 ASC AT COY UNDER GE TAWANG | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Dismantling plain or corrugated steel sheeting any thickness, any gauge, thickness, including nainital or similar roof covering. | 204 | SQM | |
| 2 | 2 | S&F for 0.63 mm Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with fixed with J or L bolt and washers, in roofs, walls etc. with grade of zinc coating | 72 | SQM | |
| 3 | 3 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws as specified. | 120 | SQM | |
| 4 | 4 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws as specified. | 12 | SQM | |
| 5 | 5 | Taking down chowkets or frame with shutter (without taking off shutters from the frame) n.exe 1.5 sqm each. | 12 | EACH | |
| 6 | 6 | Taking down chowkhats or frame with shutter (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 Sqm each. | 12 | EACH | |
| 7 | 7 | Taking down shutter of any description exc 1 sqm each and n exc 2 Sqm and removing from site. | 6 | EACH | |
| 8 | 8 | Dismantaling timber scantling 40 Sq cm as in unframed work and over in sec in any position | 0.25 | CUM | |
| 9 | 9 | M&L Second class Hard wood clean swan timber framed work as in scantling | 0.25 | CUM | |
| 10 | 10 | S&F Second class hard wood plain, solid, straight chowkhats and frame, wrought, framed rebated on the soild, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed | 1 | CUM | |
| 11 | 11 | S&F 35 mm thick, 2nd class hard wood plain framed panelled shutters (any number of panels) with lock rail and panels of timber float on both side (feather edged) or of veneered panticle board medium density wood particle board with commercial face veneers, supplied and fitted to chowkhats | 24 | SQM | |
| 12 | 12 | S&F 30mm th 2nd class hard wood glazed and skelton shutter open rebated and prepaid to receive glass gauze etc, divieded into squares (with sash bar), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for secuering glass etc size of members of shutter as specified in SSR part-I, sec 8 clause 8.24(a) all as specified and directed. | 12 | SQM | |
| 13 | 13 | S&F PVC door frame 50 mm x 47 mm made out of 5 mm thich plain colour PVC Sheet reinforced with MS Square Tube, supplying & fixing in opening as per specification & drawing | 12 | RM | |
| 14 | 14 | S&F factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail, lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS frame welded / sealed to stiles & rails with suitable PVC Sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. | 3.5 | SQM | |
| 15 | 15 | S&F 100 mm long butt hinges medium grade cold rollled mild steel and fixed | 72 | EACH | |
| 16 | 16 | S&F Aluminium anodised barrel tower bolts 125 mm of extruded section and fixed | 36 | EACH | |
| 17 | 17 | S&F 125 mm long aluminium handles cast type anodised | 72 | EACH | |
| 18 | 18 | S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed | 24 | EACH | |
| 19 | 19 | M&L 3 mm thick shet glass, ordinary quality and glazing with oil puty or wooden beads/PVC beads in square n exc 0.5 sqm in each pane | 30 | SQM | |
| 20 | 20 | M&L Galvanised MS wire cloth 0.456mm nominal dia and average width of aperture 1.40mm and fixed with tinned tack or galvanised wire staples. | 12 | SQM | |
| 21 | 21 | Dismantling of wall and celling boards (fibre, pulp, insulation, etc) or insulation board/slabs/blankets. in any thickness incl cover fillets. | 240 | SQM | |
| 22 | 22 | Dismantling boarding any description/ thickness fixed in any position with nails. | 12 | SQM | |
| 23 | 23 | M&L Second class hard wood clean sawan boarding, 50 mm thick, with butt joints ln any situation fixed with nails. | 12 | SQM | |
| 24 | 24 | M&L for 6mm thick plywood, grade BWR, type BB, fixed with nails to timber framework in wall only | 110 | SQM | |
| 25 | 25 | M&L for 4 mm thick plywood, grade BWR, type BB, fixed with nails to timber framework in ceiling, flat or sloping | 110 | SQM | |
| 26 | 26 | M&L Galvanized iron snap grid with powder coated section of size 24mmx38mmx0.7mm thick ‘T’ section and 25mmx25mmx0.35mm thick wall cleat of angle section and 4mm dia galvanized iron wire suspended with 4mm thick non AC board of Make : M/s EVEREST Industries Ltd of size 600mmx600mm and shall be fixed to galvanized iron snap grid of above section with mild steel screws as per manufacturer’s instructions including two coats of distemper oil emulsion over a coat of cement primer complete all as specified and as directed. | 36 | SQM | |
| 27 | 27 | M&L for second class hard wood plain fillets, square, rectangular or triangular in section, wrought secured with nails of sectional area exc 3 Sqcm and n.exc 6 Sqcm | 132 | RM | |
| 28 | 28 | M&L for applying two coat of synthetic enamel paint over a coat of pink primer on wood/plywood surfaces, over 10cm width or girth. | 300 | SQM | |
| 29 | 29 | Demolition of concrete in ground floor and pavings nexc 15cm thickness including floor finishes like tiles if any of any description. (below or above ground level) | 6 | CUM | |
| 30 | 30 | M&L for broken stone or boulder hardcore of gauge n exe 63mm deposited, spread and levelled in layers n exe 15cm thick, watered and rammed to a true surface. | 5 | CUM | |
| 31 | 31 | M&L for 75 mm 1:3:6 type C2 ( using 40 mm graded stone aggregate) as plinth protection./paving/footpath. | 60 | SQM | |
| 32 | 32 | Plain Cement Concrete (1:3:6) type C-1, using 20mm graded stone aggregate as in surface channel and drain complete all as specified and as directed. | 3.5 | CUM | |
| 33 | 33 | M&L 25 mm thick PCC (1:2:4) type B-1 (20mm graded aggregate) as in sub base finishing the surface even and rough to receive the topping layer. | 160 | SQM | |
| 34 | 34 | M&L screed bed or bedding layer of mortar (1:4) 15 mm thick for laying floor finishers | 160 | SQM | |
| 35 | 35 | M&L non-skid ceremic tiles 7 to 8 mm th (square / rectangular) area of each tile exc 0.11sqm but n.exc 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match. | 85 | SQM | |
| 36 | 36 | M&L vitrified tiles light shade10mm thick (square /retangular) area of each tiles exc 0.36 sqm in floors etc. Set and jointed in neat cement slurry and pointed in white or cloured cement to match | 85 | SQM | |
| 37 | 37 | M&L rendering 10 mm thick on fair faces of brick/concrete work CM 1:4 rough to received tiles rough finished. | 36 | SQM | |
| 38 | 38 | M&L for Cloured Glazed ceramic tiles in vertical surface 300 x 200 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match | 36 | SQM | |
| 39 | 39 | Demolition of Brickwork or concrete block/stone boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles | 6 | CUM | |
| 40 | 40 | M&L for Precast cement concrete (1:3:6) type C1 using 20 mm graded stone aggt block masonry with solid blocks, n.exc. 10 cm in width and setting in mortar(1:6) as in wall complete all as specified and directed. | 30 | SQM | |
| 41 | 41 | M&L PCC 1:3:6 type C-1 (20mm graded agg) as in precast block masonry with solid blocks, exc 10cm in width and setting in cement mortar 1:6,complete | 1.2 | CUM | |
| 42 | 42 | M&L for Walling of random rubble uncoursed,well bonded bedded and solidly hearted built in CM 1:6 including finishing the joints, flush as the work proceeds complete all as specified as directed. | 2.5 | CUM | |
| 43 | 43 | Taking down cement plaster of any description on brick walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.\n | 12 | SQM | |
| 44 | 44 | M&L for rendering 15mm thick cement plaster in cement mortar (1:6) on unfair faces of brickworks complete all as specified and directed. | 36 | SQM | |
| 45 | 45 | M&L preparation of new surface & applying two coats of cement based paints over a coat of cement primer on wall. | 18 | SQM | |
| 46 | 46 | Preparation of new wall surface and applying three coat of white wash complete all as specified and directed. | 18 | SQM | |
| 47 | 47 | M&L for Preparation of new steel surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. | 24 | SQM | |
| 48 | 48 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern) white with "P" or "S" Trap front or back inlet fixing bols, PVC seat cover and making all necessary connection c, complete all as specified and directed. (Note : Contractor should resolve the complain within 24 Hrs and should give feedback to the Engineer in charge).( Make : CERA/HINDWARE/PARRYWARE) | 2.5 | EACH | |
| 49 | 49 | S&F in repair Vitreous China squatting pan, `Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern & flush pipe) incl setting the trap and pan in lime mortar (1:2:5) all round and "P" or "S" Trap, complete all as specified and directed. ( Make : CERA/HINDWARE/PARRYWARE) | 2.5 | EACH | |
| 50 | 50 | S&F for 10Ltr PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed. ( Make : CERA/HINDWARE/PARRYWARE) | 5 | EACH | |
| 51 | 51 | S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm with coupling excluding taps, waste, chain and plug and porcelain stopper but including brackets , cutting for pinning in ends of brackets or erecting stand , excluding supply and fixing waste pipe, complete all as specified and directed. (Note : Contractor should resolve the complain within 24 Hrs and should give feedback to the Engineer in charge).( Make : CERA/HINDWARE/PARRYWARE) | 2 | EACH | |
| 52 | 52 | S&F in repair Vitreous China Urinal, Half stall type, white incl flush pipe, waste pipe, coupling, urinal spreader, complete all as specified and directed. (Note : Contractor should resolve the complain within 24 Hrs and should give feedback to the Engineer in charge).( Make : CERA/HINDWARE/PARRYWARE) | 1 | EACH | |
| 53 | 53 | S&F in repairs 15mm cromium plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed | 11 | EACH | |
| 54 | 54 | S&F in repair pillar taps 15mm bore dia,cast copper alloy with capstan heads,chromium plated,screwed down high pressure,with or without lettered 'Hot'or 'Coldwith long shanks and fly nuts,screwed for iron pipe and fixed | 4 | EACH | |
| 55 | 55 | S&F in repair stop cock fancy type 15mm dia CP high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union. | 2 | EACH | |
| 56 | 56 | S&F in repair 20 mm outer dia 3-layer PP-R poly propylene random copolymer pipes SDR 7-4(PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including PPR plain & brass threaded polypropylene random fitting fixed complete to walls,ceilings or laid in floor. | 50 | RM | |
| 57 | 57 | S&F PVC(SWR) pipe 110mm bore single socketed,in any length with rubber ring joints,laid in trenches or floor | 15 | RM | |
| 58 | 58 | S&F rotatiional moulded polyethylene water storage tanks 500 ltr capacity (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including dismantling existing water tank brass float valve & necessary fittings. | 5 | EACH | |
| 59 | 59 | S&F rotatiional moulded polyethylene water storage tanks 1000 ltr capacity (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including dismantling existing water tank brass float valve & necessary fittings. | 2 | EACH | |
| 60 | 60 | S&F rotatiional moulded polyethylene water storage tanks 300 ltr capacity (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including dismantling existing water tank brass float valve & necessary fittings. | 5 | EACH | |
| 61 | 61 | Preparing of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. | 860 | SQM | |
| 62 | 62 | Preparing of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. | 1120 | SQM |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
