Haryana Police Housing Corporation Limited has published Construction Of S . P Residence At Distt . Yamuna Nagar. Submission Date for this Tender is 17-05-2021. Building Work Tenders in Yamuna Nagar Haryana. Bidders can get complete Tender details and download the document.
| Name of Work: Construction of S.P residence at Distt. Yamuna Nagar | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | HSR (Civil) | BI01010001010000000000000515BI0100001112 | ||
| 2 | 2 | Earth work in excavation in foundations, trenches, etc.in all kinds of soils, not exceeding 2 metres depth including\ndressing of bottom and sides of trenches, stacking the excavated soil, clear from the edge of excavation and subsequent filling around masonry, in 15 cm layers with compaction, including disposal of all surplus soil, as directed within a lead of 30 metres as per HSR 6.6. CP 425% | BI01010001010000000000000515BI0100001113 | 301.11 | %Cum |
| 3 | 3 | Earth filling under floors with surplus soul, excavated from foundation and taken only from outside the building plinth, in 15 cm layers including ramming watering and consolidating lead upto 60 metres. HSR 6.13 CP 370% | BI01010001010000000000000515BI0100001114 | 125.21 | %Cum |
| 4 | 4 | Making holes by cutting cores of appropriate dia in RCC floors and roofs of thickness upto 6” (six inches) for passing drain pipe 4” (four inches) internal diameter and repairing the hole after insertion of drain pipe etc. including finishing complete so as to make it leak proof. HSR 8.39 (B) 0% | BI01010001010000000000000515BI0100001115 | 15 | Nos |
| 5 | 5 | Cement Concrete 1:6:12 with stone aggregate 40mm nominal size in foundation and plinth. HSR 10.32 CP 450% | BI01010001010000000000000515BI0100001116 | 66.92 | Cum |
| 6 | 6 | Cement concrete 1:4:8 with stone aggregate 40 mm Nominal size in foundation and plinth (HSR 10.39 (CP 450%) | BI01010001010000000000000515BI0100001117 | 63.8 | Cum |
| 7 | 7 | Pre-cast cement concrete 1:1.5:3 with stone aggregate 20 mm nominal size in Kerbs and the like items, finished smooth with 6 mm thick cement plaster 1:3 on exposed surface indluding from work, placing and fixing in position, complete at the ground level or in first storey. (HSR 10.77+10.95 (a)+CP 450% | BI01010001010000000000000515BI0100001118 | 8.45 | Cum |
| 8 | 8 | Cement conc. 1:1.5:3 stone aggregate 20 mm nominal size for reinforced concrete work, but excluding steel-reinforcement centring and shuttering in first storey upto 4 meters above plinth level.HSR 10.80+10.95(a) CP 450% 1st Storey | BI01010001010000000000000515BI0100001119 | 9.15 | Cum |
| 9 | 9 | 2nd Storey | BI01010001010000000000000515BI0100001120 | 2.12 | Cum |
| 10 | 10 | Cement conc. 1:1.5:3 with stone aggregate 20 mm nominal size for\nreinforced concrete work in shelves excluding steel-reinforcement but including centring and shuttering, laid in position complete in all respects.(HSR 10.81+10.95(a)) (CP 450%) 1st Storey | BI01010001010000000000000515BI0100001121 | 0.8 | Cum |
| 11 | 11 | Cement concrete 1:1.5:3 with stone aggregate 20 mm nominal size for reinforced concrete work . as per HSR No 10.82+10.95. CP 450% Ist Storey | BI01010001010000000000000515BI0100001122 | 46.4 | Cum |
| 12 | 12 | 2nd Storey | BI01010001010000000000000515BI0100001123 | 17.75 | Cum |
| 13 | 13 | Cement Concrete 1:1.5:3 with stone aggregate 20 mm nominal size for reinforced concrete work for walls exceeding 20cm thickness (straight and curved) beams, girders, stairs, columns, (square or rectangular) battens and lintels etc. excluding steel reinforcement but including centring and shuttering, laid in position, complete in all respects. as per HSR No 10.86+10.95. CP 450% Ist Storey | BI01010001010000000000000515BI0100001124 | 55.96 | Cum |
| 14 | 14 | 2nd Storey | BI01010001010000000000000515BI0100001125 | 16.99 | Cum |
| 15 | 15 | Cement concrete 1:2:4 with stone aggregate 20 mm nominal size for reinforced concrete work in fascias parapets and other thin vertical sections, not covered by Item Nos. 10.82, 10.86 to 10.88 not exceeding 10 cm thickness excluding steel reinforcmentincluding centring and shuttring, laid in position, complete in all respect as per HSR No 10.89+10.95 (a) CP 450% 2nd Storey | BI01010001010000000000000515BI0100001126 | 3.37 | Cum |
| 16 | 16 | 3rd Storey | BI01010001010000000000000515BI0100001127 | 2.68 | Cum |
| 17 | 17 | Cement concrete 1:1.5:3 aggregate 20 mm nominal size for reinforced concrete work in footings, strips, foundations, beams, rafts, pedestals and approach slabs of bridges etc, excluding steel reinforcement but including centring and shuttering, laid in position, complete in all respects.(For work upto 1.5 Mtr below ground level). HSR10.90+10.95(a) (C.P 450%) | BI01010001010000000000000515BI0100001128 | 39.37 | Cum |
| 18 | 18 | Damp proof course 25 mm thick of cement concrete 1:2:4 using stone aggregate 20 mm nominal size with 2 coats of bitumen 20/30 penetration, at 1.65 kg per sqm laid hot and sanded. (HSR 10.114+Note) CP 450% (Without bitumen) | BI01010001010000000000000515BI0100001129 | 132.44 | Sqm |
| 19 | 19 | Cement concrete 1:2:4 with stone aggregate 20 mm nominal size in payments, roads, taxi-tracks and runways, laid to required slope and camber, including consolidation, finishing and tamping complete.. HSR 10.32 CP 450% | BI01010001010000000000000515BI0100001130 | 66.92 | Cum |
| 20 | 20 | First class brick work laid in cement sand mortar 1:6 in foundation and plinth. (HSR 11.2). CP650% | BI01010001010000000000000515BI0100001131 | 60.7 | Cum |
| 21 | 21 | First class brick work laid in cement sand mortar 1:4 in foundation and plinth. (HSR 11.4) (CP 650%) | BI01010001010000000000000515BI0100001132 | 74.61 | Cum |
| 22 | 22 | First class brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinthlevel. (HSR 11.9). CP650% Ist Storey | BI01010001010000000000000515BI0100001133 | 59.68 | Cum |
| 23 | 23 | 2nd Storey | BI01010001010000000000000515BI0100001134 | 0.45 | Cum |
| 24 | 24 | 3rd Storey | BI01010001010000000000000515BI0100001135 | 1.08 | Cum |
| 25 | 25 | Dressed or moulded one brick cornice laid in cement sand mortar 1:4 including 12 mm thick cement plster 1:4 or pointing, as required.(HSR 11.78+CP 650%) 2nd Storey | BI01010001010000000000000515BI0100001136 | 29.07 | Rmt |
| 26 | 26 | 3rd Storey | BI01010001010000000000000515BI0100001137 | 34.44 | Rmt |
| 27 | 27 | Providing and laying autoclaved aerated (Cellular) Concrete light weight blocks ( As per IS :2185,Part 3 having density of 550 to 650 kg/sqm and compressive strength of 4.0 N/mm2 masonary in non load bearing walls using 100 mm thick AAC blocks complete in all respec (as per HSR item 11.104(ii )+11.41 CP 0%) with polymer modified adhesive of reputed make as approved by Engineer - in - Charge (HSR 11.104 +CP @0%) Ist Storey | BI01010001010000000000000515BI0100001138 | 104.05 | sqm |
| 28 | 28 | 2nd Storey | BI01010001010000000000000515BI0100001139 | 25.77 | sqm |
| 29 | 29 | Providing and laying autoclaved aerated (Cellular) Concrete light weight blocks ( As per IS :2185, Part 3 having density of 550 to 650 kg/sqm and compressive strength of 4.0 N/mm2 masonary in non load bearing walls using more than 100 mm thick AAC blocks complete in all respec (as per HSR item 11.105(ii )+11.41 CP 0%) with polymer modified adhesive of reputed make as approved by Engineer - in - Charge (HSR 11.105 +CP @0%) Ist Storey | BI01010001010000000000000515BI0100001140 | 83.4 | Cum |
| 30 | 30 | 2nd Storey | BI01010001010000000000000515BI0100001141 | 49.05 | Cum |
| 31 | 31 | 3rd Storey | BI01010001010000000000000515BI0100001142 | 9.59 | Cum |
| 32 | 32 | Terracing consisting of tiles 22.86 cm X 11.43cm X 3.81 cm laid over 87.50 mm mud filling on a layer of 25 mm mud plaster and on other layer of mud mortar for laying the tiles, including two coasts of bitumen laid hot at 1.65 Kg per sqm on top of R.C.C. slab including grouting with cement sand mortar 1:3 and top surface to be left clean etc. HSR 13.13 CP 600% 2nd Storey | BI01010001010000000000000515BI0100001143 | 315.06 | Sqm |
| 33 | 33 | Top khurra 0.6 m X 0.6 m for rain water pipe in 25 mm thick cement concrete 1:2:4 over 50 mm thick cement concrete 1:8:16 (HSR 13.50) (CP 240%) | BI01010001010000000000000515BI0100001144 | 12 | Each |
| 34 | 34 | Applying bitumen on roofs including heating and carriage to roof. HSR 13.59 CP 240% | BI01010001010000000000000515BI0100001145 | 3.4 | Qtl |
| 35 | 35 | Cement concrete 1:1.5:3 gola 10cm X 10cm quadrant along junction of roof with parapet wall finished smooth, where specially specified. (HSR 13.64) (CP 240%) | BI01010001010000000000000515BI0100001146 | 56.08 | Mtr |
| 36 | 36 | Providing & fixing PVC Rain water pipe 6Kg pressure of ISI mark in cement mortar during masonry workcement mortar during masonry work (HSR 13.89) (CP 20%) (a) 100 mm dia PVC pipe 6 Kg. pressure | BI01010001010000000000000515BI0100001147 | 52.58 | Rmt |
| 37 | 37 | Provding &Fixing PVC bend of ISI mark (HSR 13.90 ) (CP 20%) (a) 100 mm dia PVC bend | BI01010001010000000000000515BI0100001148 | 20 | Each |
| 38 | 38 | Providing and fixing Gl Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing 'C' wall angle of size 20x30x20 mm made of 0.5 mm thick\npre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 7x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier\nbracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of Gl steel 0.45 mm thick is then fixed to the main C carrier\nand in direction perpendicular to it at 600mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in tiles into spring T with :(HSR 13.100) CP 0% | BI01010001010000000000000515BI0100001149 | ||
| 39 | 39 | a) GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. | BI01010001010000000000000515BI0100001150 | 15.51 | Sqm |
| 40 | 40 | Base course of floors consisting of 100 mm thick cement concrete 1:8:16 and 100 mm sand or stone filling. (HSR 14.1) 400% | BI01010001010000000000000515BI0100001151 | 369.23 | Sqm |
| 41 | 41 | Screed of 50 mm thick cement concrete 1:8:16 to be laid below the topping. (HSR 14.4) CP 400% 2nd floor | BI01010001010000000000000515BI0100001152 | 272.94 | Sqm |
| 42 | 42 | Providing & fixing virtified tiles of size600x 600mm of approved make in flooring laid in any pattern as specified over20 mm thick cement coarse sand mort-ar 1:3 and jointed with white cement slu-rry mixed wih pigment to match the shade to tiles (HSR 14.89+Cp@-15) | BI01010001010000000000000515BI0100001153 | 321.75 | Sqm |
| 43 | 43 | Providing & fixing ceramic tiles/anti skidtiles of size 400mm x 400mm or abovesize of approved make in flooring, laid inany pattern as specified over base of 20mm thick cement coarse sand mortar 1:3and jointed with white cement slurry mi-xed with pigment to match the shade of tiles. HSR 14.91 (CP-15%)\nNote:- Tile should be of premium quality (first quality ) of approved make | BI01010001010000000000000515BI0100001154 | 8.43 | Sqm |
| 44 | 44 | Providing & fixing 1st quality ceramic glazed manufacturer of approved make in all colours, shadesof approved make in all colours, shades except burgandy, bottle green, black ofexcept burgandy, bottle green, black ofany size as approved by Engineer- In- Charge in skirting, risers of steps and dadosover 12 mm thick bed of cement slurry,including pointing in white cement mixed with pigment of matching shades complete. (HSR 14.92 b) (CP 0%) (b) size of ceramic Glazed tiles 300mm X 450mm | BI01010001010000000000000515BI0100001155 | 170.7 | Sqm |
| 45 | 45 | Providing edge moulding to 17-20mm thick granite stone counters, vanities etc. including machine polished to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge (Moulding) HSR 14.98 b CP 0%) 1st Storey | BI01010001010000000000000515BI0100001156 | 87.78 | Rmt |
| 46 | 46 | 12 mm thick cement plaster 1:4 (HSR 15.5) CP 600% | BI01010001010000000000000515BI0100001157 | 450.87 | Sqm |
| 47 | 47 | 12 mm thick plaster 1:6 (HSR 15.7) CP 600% | BI01010001010000000000000515BI0100001158 | ||
| 48 | 48 | 1st Storey | BI01010001010000000000000515BI0100001159 | 34.42 | Sqm |
| 49 | 49 | 2nd Storey | BI01010001010000000000000515BI0100001160 | 10.73 | Sqm |
| 50 | 50 | 15 mm thick cement plaster 1:4 on the rough side of single or half brick wall. (HSR 15.10) CP 600% | BI01010001010000000000000515BI0100001161 | ||
| 51 | 51 | 1st Storey | BI01010001010000000000000515BI0100001162 | 934 | Sqm |
| 52 | 52 | 2nd Storey | BI01010001010000000000000515BI0100001163 | 582.23 | Sqm |
| 53 | 53 | 3rd Storey | BI01010001010000000000000515BI0100001164 | 136.75 | Sqm |
| 54 | 54 | 15 mm th. Cement plaster 1:6 (HSR 15.12) CP 600% | BI01010001010000000000000515BI0100001165 | ||
| 55 | 55 | 1st Storey | BI01010001010000000000000515BI0100001166 | 34.42 | Sqm |
| 56 | 56 | 2nd Storey | BI01010001010000000000000515BI0100001167 | 10.73 | Sqm |
| 57 | 57 | 10 mm thick cement plaster 1:4 under side of ceiling(HSR 15.52) CP 600% | BI01010001010000000000000515BI0100001168 | ||
| 58 | 58 | 1st Storey | BI01010001010000000000000515BI0100001169 | 355.4 | Sqm |
| 59 | 59 | 2nd Storey | BI01010001010000000000000515BI0100001170 | 85.54 | Sqm |
| 60 | 60 | Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or matallic or plastered or concrete surfaces to give an even shade. HSR 16.3 CP 230% | BI01010001010000000000000515BI0100001171 | 121.7 | Sqm |
| 61 | 61 | Applying priming coat with metal primer on New steel or iron work including preparation of surface. (HSR 16.9) 230% | BI01010001010000000000000515BI0100001172 | 119.47 | Sqm |
| 62 | 62 | Distempering with washable oil bound distemper (of approved manufacture) two coats over one priming coat on new work. (HSR 16.58) CP 230% | BI01010001010000000000000515BI0100001173 | 1359.14 | sqm |
| 63 | 63 | Providing two coats of exterior acrylic emulsion paint. (HSR 16.79 b) CP 0% b) 1st quality | BI01010001010000000000000515BI0100001174 | 2103.85 | Sqm |
| 64 | 64 | Providing and applying two coats white cement based putty over plastered surface and grinding the surface smoothwith sand paper to get an even and smooth finish including cost and carriage of all metrial, labour charges, scaffolding, sundries etc. complete(J.K./Birla Cement). HSR 16.81 CP 230% | BI01010001010000000000000515BI0100001175 | 2589.95 | Sqm |
| 65 | 65 | Teak wood chowkats of doors and windows including iron hold fasts, corner straps, screws, bolts for hold fasts, corner straps, screws, bolts for hold fasts etc., complete fixed in position.- HSR 17.13 + CP 300% | BI01010001010000000000000515BI0100001176 | 0.97 | Cum |
| 66 | 66 | Supplying and fixing hydraulic door Closer, I.S.I mark, with necessary Screws, etc., complete- HSR 17.82 + CP 300% | BI01010001010000000000000515BI0100001177 | 9 | Nos |
| 67 | 67 | Providing and fixing plastic laminated sheets thickness,not less than 1.5 mm (conforming to I.S.specifications),including cost of approved adhesive complete (a) Natural Finish (HSR 17.88 CP 300%) | BI01010001010000000000000515BI0100001178 | 13.01 | Sqm |
| 68 | 68 | Factory manufacture solid flush door and Shutters, with block board core as per I.S. No. 1659-1969 bonded with water poof type phenol formal dehyde synthetic resin, hot-pressed, conforming to I.S. 2202 part I and II, fixed in positon includeing iron hinges, screws, chocks/cleats and stops etc. (excluding the cost of any fittings other than specified above, but including labour for fixing the same in position)- (17.93 a(iii) +17.18 note+CP@200%) | BI01010001010000000000000515BI0100001179 | ||
| 69 | 69 | C )decorative veneering with vertical grains or cross bands and face veneer on both sides teak facing and edges lipped with commercial hard wood with laminated core. | BI01010001010000000000000515BI0100001180 | ||
| 70 | 70 | iii) 35 mm thick | BI01010001010000000000000515BI0100001181 | 48.12 | Sqm |
| 71 | 71 | ii) 25 mm thick | BI01010001010000000000000515BI0100001182 | 4.39 | Sqm |
| 72 | 72 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS;733 and IS;1285 fixed with raw plugs and screws or with fixing clips or with exp ansions hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required neoprane felt etc. aluminium sections shall be smooth, rust free straight mitered and jontingmechanically wherever required including cleat angle, aluminium snap beading for glazing/paneling CP brass/stainless steel screws all complete. HSR 17.95+Note. CP 15%\nNote: - Add Rs. 15/- per Kg. extra if powder coating of 50 micron is done instead of anadizing in above item | BI01010001010000000000000515BI0100001183 | 448.95 | Kg |
| 73 | 73 | Providing & fixing aluminium work for done doors, windows, ventilators and partitions with extruded built up standard turbular sections/appropriate Z sections and othersections of approved make conforning to sections of approved make conforning to IS;733 and IS;1285 fixed with rawel plugsand screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top bottom, and sides with required neoprane felt etc. aluminium sections shall be smooth, rust free straight mitered and jointed mechanically whereever required including cleat angle, Aluminium snap beading for glazing/paneling CP brass/stainless steel screws, etc, complete shutters of doors windows & ventilators including providingand fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of PVC/neoprane gasket required including Aluminium fitting. as per HSR 17.96+Note. CP 15%\nwith powder coated 50 micron | BI01010001010000000000000515BI0100001184 | 587.01 | Kg |
| 74 | 74 | Providing & fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforning to IS;12823 grade 1 type II in paneling fixed in aluminium doors. Windows shutters and partition frames with c.p brass/stainless steel screws etc.complete. as per HSR 17.97 (C.P 5%) | BI01010001010000000000000515BI0100001185 | ||
| 75 | 75 | (a) Pre-laminated particle board with decorative lamination on one side and balancing lamination on both sides. | BI01010001010000000000000515BI0100001186 | 1.49 | Sqm |
| 76 | 76 | Providing and fixing glazing in aluminium door, windows, ventilator shutter and parttions etc. with pvc/neoprane gasket etc. complete ( cost of aluminium snap beading shall be paid in basic items ). b) with float glass panes of 5 mm thickness (HSR 17.98 CP 15%) | BI01010001010000000000000515BI0100001187 | 25.36 | Sqm |
| 77 | 77 | Supplying and fixing rolling shutters, of approved make, M.S. laths, interlocked together through their entire length, and jointed together, t the end, by end locks mounted on specially designed pipe shaft, with brackets, side guides 27.5 cm long wire spring grade no. 2 and arrangement for inside and out-side locking with push and pull operation complete, including top cover 0.80 mm thick (payment is to be made for the exact size of opening where rolling shutter is to be fixed):- (HSR 18.18 (b)+CP 500%) | BI01010001010000000000000515BI0100001188 | 9.27 | Sqm |
| 78 | 78 | Fe 500 EQR steel bars for RCC works where not i/c in the complete rate of RCC including bending binding and placing in position complete. As per HSR 18.22 (C.P 500%) | BI01010001010000000000000515BI0100001189 | 236.14 | Qtl |
| 79 | 79 | Supplying and fixing glass panes including special metal sash putty of approved make. (HSR 18.30 b) 500% b) glass panes 4 mm thick, exceeding 40 sq dm areas. | BI01010001010000000000000515BI0100001190 | 42.25 | Sqm |
| 80 | 80 | Preparation of sub grade, including trenching, rough dressing of spoil final dressing of earth,to given levels and camber, watering, rolling with road roller, and compacting the bed. (HSR 24.1) 370% | BI01010001010000000000000515BI0100001191 | 439.36 | %Sqm |
| 81 | 81 | Total HSR(Civil) | BI01010001010000000000000515BI0100001192 | ||
| 82 | 82 | NS(CIVIL) | BI01010001010000000000000515BI0100001193 | ||
| 83 | 83 | Earth filling with the earth brought from outside the campus irrespective of any lead lift including laying in 15cm in layers, watering and consolidating complete in all respect and fully satisfaction of Engineer-in-charge. NS | BI01010001010000000000000515BI0100001194 | 827.17 | Cum |
| 84 | 84 | Providing and laying 17 mm thick and above in any shade/Colour granite laid over a base of 20 mm thick cement sand screed 1:3 complete as directed by Engr-in-charge NS | BI01010001010000000000000515BI0100001195 | 76.6 | Sqm |
| 85 | 85 | Water proofing of the roof with SIKA Cemcrete including cleaning the surface, filling of joints & gaps, with slurry using water proofing compound SIKA CEM, making of Polymer, rich gola, from out side at the vertical and horizontal joints, applying 1st coat of SIKA CEMCRETE with fibermesh and 2nd coat SIKA CEMCRETE (Acrylic polimer UV resistant coating) on the roof and both rooms. NS | BI01010001010000000000000515BI0100001196 | 16.58 | sqm |
| 86 | 86 | Providing and fixing 200mm wide Fiber mesh over block and RCC column/beam joints & over wall repair of pipe/electrical works complete to the entire satisfacation of Engineer in Charge complete in all respect. | BI01010001010000000000000515BI0100001197 | 1052.07 | Sqm |
| 87 | 87 | Chase cutting in brick work size 150mm high for flushing of skirting with wall plaster complete in all respect as directed by Engr-in-charge NS | BI01010001010000000000000515BI0100001198 | 495.94 | Rmt. |
| 88 | 88 | Providing and fixing Stainless steel fittings of approved make (NS) | BI01010001010000000000000515BI0100001199 | ||
| 89 | 89 | Sliding Bolt EX-02 SS Finish 250 mm | BI01010001010000000000000515BI0100001200 | 25 | Each |
| 90 | 90 | Tower bolt 10 mm Dec nob SS Finish -200mm | BI01010001010000000000000515BI0100001201 | 34 | Each |
| 91 | 91 | Tower bolt 10 mm Dec nob SS Finish -150mm | BI01010001010000000000000515BI0100001202 | 126 | Each |
| 92 | 92 | Tower bolt 10 mm Dec nob SS Finish 100mm | BI01010001010000000000000515BI0100001203 | 92 | Each |
| 93 | 93 | Handle Monty 125mm Brush Nikle | BI01010001010000000000000515BI0100001204 | 66 | Each |
| 94 | 94 | Handle Monty 100mm Brush Nikle | BI01010001010000000000000515BI0100001205 | 47 | Each |
| 95 | 95 | Door stoppers SS Finish DS-02 | BI01010001010000000000000515BI0100001206 | 32 | Each |
| 96 | 96 | Providing and fixing powder coated aluminum fitting of approved make complete in all respect | BI01010001010000000000000515BI0100001207 | ||
| 97 | 97 | i) Folding Handles(collapsible handle) - 100mm | BI01010001010000000000000515BI0100001208 | 47 | Each |
| 98 | 98 | ii) I-Hook | BI01010001010000000000000515BI0100001209 | 47 | Each |
| 99 | 99 | iii) Magnet catcher double strip (31.05-25%) | BI01010001010000000000000515BI0100001210 | 2 | Each |
| 100 | 100 | Providing and fixing MS Tie rod 8 mm fully threaded with nut bolt and washer inserted in aluminum doors complete in all respect.NS | BI01010001010000000000000515BI0100001211 | 19.2 | Mtr |
| 101 | 101 | Providing and fixing SS rod for curtains incluidng clamps of SS and side knobs including fixing arrangement complete in all respects. NS | BI01010001010000000000000515BI0100001212 | 91.44 | Rmt. |
| 102 | 102 | Providing PU polished on surface of shutter and false ceiling with sprey pump i/c cost of all material and labour complete to the entire satisfaction of Enginner-in-Charge | BI01010001010000000000000515BI0100001213 | 120.76 | Sqm |
| 103 | 103 | Providing and fixing mumty door consisting of mild steel angle iron frame 35x25x5mm thick, cross braces 20x 5mm @ 4nos. at each side) and 2Nos. MS flat 50x6mm and covered with MS sheet 16 gauge including locking arrangement (with sliding bolts & T- bolt N.S. | BI01010001010000000000000515BI0100001214 | 300 | Kg |
| 104 | 104 | Making corbelling of RCC 1:1.5:3 i/c shuttering complete in all respect. NS | BI01010001010000000000000515BI0100001215 | 63.51 | Rmt. |
| 105 | 105 | Extra for Applying 12mm thick plaster on corbelling NS | BI01010001010000000000000515BI0100001216 | 63.51 | Rmt. |
| 106 | 106 | Providing and Fixing ACP Sheet 5.0 mm thick of nominal range in partitions complete in all respect NS | BI01010001010000000000000515BI0100001217 | 2.69 | sqm |
| 107 | 107 | Extra for making hole in working slab in kitchen for gas pipe etc including finishing complete. NS.. | BI01010001010000000000000515BI0100001218 | 1 | Each |
| 108 | 108 | Providing and fixing M.S. fastener 10 mm dia for holding vertical pipe clamps complete as directed by Engr-in-charge | BI01010001010000000000000515BI0100001219 | 50 | Each |
| 109 | 109 | Providng in fixing in position MS clamp for fixinng of PVC rain water pipe 150 mm dia i/c nut & bolts Complete as specified and directed by Engr-in-Charge NS | BI01010001010000000000000515BI0100001220 | 34 | Each |
| 110 | 110 | Extra for trimix on concrete Surface of Road with Vaccum dewatering system complete in all respect. (NS) | BI01010001010000000000000515BI0100001221 | 439.36 | Sqm |
| 111 | 111 | Cutting groove in flooring in expansion joint 4mmx50mm size N.S | BI01010001010000000000000515BI0100001222 | 332.88 | Mtr. |
| 112 | 112 | Applying priming coat exterior primer before provided weather shield exterior paint on outer walls on plastered / brick surface NS | BI01010001010000000000000515BI0100001223 | 2103.85 | Sqm |
| 113 | 113 | Providing and fixing factory manufactured 50 mm thick frame and 30 mm thick intermediates reinforced cement concrete jali with cement sand and agg ratio 1:1.5:3 by using 1.6 mm dia steel wire fixed in position in ducts etc. at any height complete in all respects NS | BI01010001010000000000000515BI0100001224 | 27.17 | Sqm |
| 114 | 114 | Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part - 1 & II) 1976, applied on hacked / uneven background such as bare brick/ block/ RCC work on walls & ceiling at all floors and locations, finished in smooth line and level etc. complete.DSR/2018/13.78 (342.85-30%) | BI01010001010000000000000515BI0100001225 | 827.9 | sqm |
| 115 | 115 | P & F stainless steel wire mess jali of 22 gauge, clear aperture 1.4mm in 304 grade in aluminium door & window in aluminium section including PVC/Neoprone gasket & Labour for fixing (excluding the coast of beading, channel etc, the same will be paid in aluminium work (NS item) N.S. | BI01010001010000000000000515BI0100001226 | 59.62 | Sqm |
| 116 | 116 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). DSR/2018/10.28 (575.45-30%) | BI01010001010000000000000515BI0100001227 | 605.4 | Kg |
| 117 | 117 | Extra for providing opening of required size and shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite /Stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc.complete DSR 8.5 | BI01010001010000000000000515BI0100001228 | 6 | Each |
| 118 | 118 | Providing and fixing sparkle frosted film on glass panes complete in all respect. | BI01010001010000000000000515BI0100001229 | 6.99 | Sqm |
| 119 | 119 | Providing and Fixing Rustic Floor tiles of of size 300x300mm of 10mm thick premium quality in cement sand Mortar 1:3.20mm thick complete in all respect. (NS) | BI01010001010000000000000515BI0100001230 | 206.15 | sqm |
| 120 | 120 | Providing and fixing wooden cupboard with frame with 19 mm thick board , 1 mm thick sunmica inside and outside veneer on the face of board two partition and drawers, Fittings etc as per drawings approved by Engineer-in-charge complete in all respect (NS) | BI01010001010000000000000515BI0100001231 | 28.17 | sqm |
| 121 | 121 | Providing and fixing 19mm thick Green make Commercial Board with 2 Nos drawers with & finish with 4mm thick Veneer of Green make complete in all respect. | BI01010001010000000000000515BI0100001232 | 8.31 | sqm |
| 122 | 122 | Providing and fixing 4mm thick Acrylic sheet on toilet flush door etc complete in all respect. (NS) | BI01010001010000000000000515BI0100001233 | 13.01 | sqm |
| 123 | 123 | Providing and Fixing precast pre-polished cement cocnrete tiles 300x300x25mm thick (NTC make) at plinth protection laid over 20mm thick base of ceemnt coarse sand mortar 1:3 with joints filled with white cement slurry mixed with matching shade. | BI01010001010000000000000515BI0100001234 | 25.11 | sqm |
| 124 | 124 | Providing and Fixing 2 mm thick plain fiber sheet in boundry wall with fixing of plain fiber sheet in position complete in all respect. | BI01010001010000000000000515BI0100001235 | 8.92 | Sqm |
| 125 | 125 | Total NS (Civil) | BI01010001010000000000000515BI0100001236 | ||
| 126 | 126 | HSR (Publiuc Health) | BI01010001010000000000000515BI0100001237 | ||
| 127 | 127 | Excavation, of trenches in streets, lanes or in open areas for strom sewer, sewers runningby gravity and manholes to full depths as shown in drawings including shoring,timbering of poling boards, frame system type, dressing to correct sections and dimensions, according to templates and levels, dewatering, provision for diversion of traffic, cutting trees and bushes, etc. night signals, profiles, pegs, sight rails, boning roads, crossing over trenches for access to the houses, watching, fencing etc., fixing and maintenance of caution boards, refilling of trenches, watering of refill, in 15 cm layers, ramming and restoration of unmetalled or unpaved surface to original condition and removal of surplus soil,from site of work, upto a lead of 1 km in ordinary soil \n(a) for depths of excaution not exceeding 3 meters below. HSR 6.10(a) CP 370% | BI01010001010000000000000515BI0100001238 | 69.9 | %cum |
| 128 | 128 | Cement concrete 1 : 4 : 8 with stone aggregate 40 mm Nominal size in foundation and plinth.as per HSR No 10.39. CP 450% | BI01010001010000000000000515BI0100001239 | 6.12 | Cum |
| 129 | 129 | cement concrete 1: 1.5: 3 with stone aggregate 20 mm nominal size in foundation and plinth..as per HSR No 10.42. CP 450% | BI01010001010000000000000515BI0100001240 | 6.06 | Cum |
| 130 | 130 | Cutting holes upto 23 cm through stone masonry or brick work in Cement walls for pipes and making good including repointing, replastering And finishing according to existing finish where required. HSR 28.24 CP 300% b) 22.86 cm thickness of walls | BI01010001010000000000000515BI0100001241 | 20 | Each |
| 131 | 131 | Cutting holes upto 23 cm square for pipes in floor and roofs of cement concrete / reinforced concrete or reinforced brick work and making good incl repointing , replastering , replacing bitumen and colour or white washing where reqd ( HSR 28.26 b) CP 300% b. 115 mm thickness of floor or roof | BI01010001010000000000000515BI0100001242 | 10 | Each |
| 132 | 132 | Bailing out water from the trenches for making new connections in fully charged pipe-lines including cleaning, trimming and dressing the trenches to correct alignment and grade as required by the Engineer-in-charge. (HSR 28.47 a) CP 300% (a) upto 200 mm internal diameter | BI01010001010000000000000515BI0100001243 | 1 | Each |
| 133 | 133 | P&F brass Gunmetal ferrule by drilling and tapping cast iron /GI/ DI pipe line of all dia in making connection i/c carriage,loading, unloading etc complete in all respects (HSR 28.54) CP 10% (b) 10 mm dia | BI01010001010000000000000515BI0100001244 | 2 | Each |
| 134 | 134 | Masonry Chambers.\nCONSTRUCTION BRICK MASONRY INSPECTION CHAMBER SIZES AS GIVEN BELOW UPTO 0.60 METRE AVERAGE DEPTH in cement mortar 1:5 LIMECONCRETE with 40 percent lime mortar 2:3 in foundation cement concrete 1:2:4 BENCHING 12mm THICK CEMENT PLASTER 1:2 with a floating coat of 1mm thick of neat cement, R.C.C.1:2:4 SLAB 100mm THICK /C.C.TOPPING 50 mm THICK WITHOUT 455 MM x455MM/455MMx610MM INSIDE LIGHT DUTY C.I. INSPECTION CHAMBER COVER AND FRAME weight as per I.S.I. specification painted WITH 3 COATS OF black bitumastic superior paint complete as per standard design but incl SFRC frame and cover as directed by engr-in-charge . (HSR 29.84 b) 450% | BI01010001010000000000000515BI0100001245 | ||
| 135 | 135 | Size 450 mm x 600 mm inside (with 455 mm x 610 mm cover and frame light duty single seal pattern I weighing 38 kg with C.C.topping ) | BI01010001010000000000000515BI0100001246 | 5 | Each |
| 136 | 136 | Size 600 mm x 900 mm inside (with 455 mm x 455 mm cover and frame light duty single seal weighing 20 kg with C.C. topping ) | BI01010001010000000000000515BI0100001247 | 5 | Each |
| 137 | 137 | Providing & fixing SFRC manhole covers and frames marked with IS: 12592 including setting the same to correct lines and levels in 1:2 cement sand mortar over manhole including carriage loading, unloading stacking handling, rehanding etc. Complete in all respects to the satisfaction of engineer-in-charge. HSR 29.94 CP 5%\nType: Extra Heavy duty Set (HD 20) 560 mm clear opening | BI01010001010000000000000515BI0100001248 | 10 | Each |
| 138 | 138 | Providing SALT GLAZED STONE WARE PIPES GRADE 'A' IN STANDARD LENGTH IS:651 and their lowering, cutting, jointing and testing as described in HSR item No. 29.38, 29.39, 29.40 including the cost of jointing meterials as well as carriage, loading, unloading, stacking, handling, re-handling etc. complete in all respects to the satisfaction to the Engineer-in-Charge. as per HSR 29.95 c) (C.P. 5%) c) 200 mm dia | BI01010001010000000000000515BI0100001249 | 75.29 | Mtr |
| 139 | 139 | Providing And Fixing In Position Best Indian Make (Ordinary) Lavatory suites consisting of lavatory in vitreous chinaware size as give below ( to the approval of the engineer-in-charge) including china plug for tap hole where necessary r.s. Or c.i.brackets for building into wall including painting 32mm c.p.brass waste with c.p. Brass chain and rubber plug 15mm c.p.brass screw down pillar tap with jam nuts or couplings best design (as approved by the engineer-in-charge) all fittings best indian make and; to the approval of the engineer-in-charge. All brass work chromium plated and complete in all respects including cutting and making good the walls, floors and painting of fittings etc. (white)\niv) Size 550 mm x 400 mm with one no. tap (HSR 30.41a iv) 340% | BI01010001010000000000000515BI0100001250 | 1 | Each |
| 140 | 140 | Providing and fixing in position best Indian make Pedestal fittings of vitreous chinaware complete (as required by the Engineer-in-charge) (white) (HSR 30.44) 340% | BI01010001010000000000000515BI0100001251 | 1 | Each |
| 141 | 141 | PROVIDING AND FIXING IN POSITON BEST INDIAN MAKE CHROMIUM PLATED BRASS 2ND TRAP FOR LAVATORY SUITE.(HSR 30.45) 340% | BI01010001010000000000000515BI0100001252 | 1 | Each |
| 142 | 142 | Providing and fixing in position best Indian make towel rails fixed in with raw slugs embedded in walls with c.p brass screws. Complete in all respect including cutting and making good the walls etc. (HSR- 30.68 b(ii)) 340%\n | BI01010001010000000000000515BI0100001253 | ||
| 143 | 143 | b) 20 MM DIA C.P BRASS ADJUSTABLE | BI01010001010000000000000515BI0100001254 | ||
| 144 | 144 | ii) 600 mm long. | BI01010001010000000000000515BI0100001255 | 7 | Each |
| 145 | 145 | PROVIDING AND FIXING IN POSITION GLASS SHELF FIXED IN WITH RAWL PLUGS WITH C.P BRASS SCREWS COMPLETE INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. (HSR 30.69 a)i) CP 340% | BI01010001010000000000000515BI0100001256 | ||
| 146 | 146 | a) With C.P brass brackets and guard rail | BI01010001010000000000000515BI0100001257 | ||
| 147 | 147 | i) 600 mm x 125 mm | BI01010001010000000000000515BI0100001258 | 7 | Each |
| 148 | 148 | Providing and fixing in position best Indian make Soap dish fixed into wall with C.P brass screws and complete in all respects including cutting and making good the wells etcs. (HSR 30.70 a)ii) CP 340% | BI01010001010000000000000515BI0100001259 | ||
| 149 | 149 | a) C.P BRASS | BI01010001010000000000000515BI0100001260 | ||
| 150 | 150 | ii) Soad dish 380 mm | BI01010001010000000000000515BI0100001261 | 7 | Each |
| 151 | 151 | Providing and fixing in position 15 mm i/d C.P brass bib Cocks of best quality (as required by Engineer-in-charge). HSR 30.75 CP 340% | BI01010001010000000000000515BI0100001262 | ||
| 152 | 152 | a) Bib cock long body | BI01010001010000000000000515BI0100001263 | 6 | Each |
| 153 | 153 | c) Bib cock Short Body | BI01010001010000000000000515BI0100001264 | 1 | Each |
| 154 | 154 | Providing and fixing in position C.P brass stop cocks (as Approved by the Engineer-in-charge) (HSR 30.76) 340% | BI01010001010000000000000515BI0100001265 | ||
| 155 | 155 | 15 MM STOP COCK | BI01010001010000000000000515BI0100001266 | ||
| 156 | 156 | i) Stop cock male and female/angle cock | BI01010001010000000000000515BI0100001267 | 3 | Each |
| 157 | 157 | ii) conceled stop cock with flange | BI01010001010000000000000515BI0100001268 | 3 | Each |
| 158 | 158 | Providing And Fixing Lead Inlet Connection With Brass Union For Flushing And Warning Pipes Complete In All Respects.(HSR 30.93) 300% c) 15 mm alkahene pipe inlet connection | BI01010001010000000000000515BI0100001269 | 38 | Each |
| 159 | 159 | Cutting Chase In Brick Walls In Cement Or In Floor For Embedding G.I Or H.C.I Pipe Lines And Making Good The Same To Its Original Condition (HSR 30.95 c)340% c) Size 75 mm x 50 mm | BI01010001010000000000000515BI0100001270 | 30.48 | Mtr |
| 160 | 160 | Providing and fixing in position automatic brassball valves in tanks. (HSR- 30.110 b ii) 340% 20 mm internal diameter | BI01010001010000000000000515BI0100001271 | 6 | Each |
| 161 | 161 | PROVIDING AND FIXING IN POSITION GULLY TRAPS FIXED IN CEMENT CONCRETE 1:4:8 complete WITH H.C.I GRATING 150 MM X 150 MM CAST IRON COVER WEIGHING APPROXIMATELY 7.26 KG AND FRAME CLEAR OPENING 300 MM X 300 MM and outside size 330 mm x 330 MM AND CHAMBER INCLUDING cost of all brick work in CEMENT MORTSAR 1:5 CEMENT CONCRETE 1:8:16 IN FOUNDATIONS AND CEMENT CONCRETE 1:2:4 IN COPING around C.I cover and frame etc. WITH THREE COATS of black bitumastic superior PAINT of approved manufacture on all C.I work AS PER STANDARD DESIGN,.excluding CI cover but incl SFRC frame and cover, minimum depth of water should be 150 mm with a minimum seal 50 mm (HSR 30.114) (a) (CP 340 %) 100 mm internal diameter S.W. gully trap | BI01010001010000000000000515BI0100001272 | 10 | Each |
| 162 | 162 | Providing and fixing HDPE WATER STORAGE TANKS of Sintex, Diplast, O.K. supereme make with cover/lids markedwith IS: 12701 on roof top of buildings in cluding cost of hoisting and placing in position, making connections with inlet and outlet pipes, providing overflow & scourprovisions with suitable plug on scour pipe including cost of nipples, washers, flanges for connections in tanks complete in all respects to the satisfaction of Engineer-in-Charge.( Except civil work). As per HSR 30.119 (C.P. 0%)\n500 ltr. | BI01010001010000000000000515BI0100001273 | 6 | Each |
| 163 | 163 | Total HSR (P.H) | BI01010001010000000000000515BI0100001274 | ||
| 164 | 164 | NS (P.H) | BI01010001010000000000000515BI0100001275 | ||
| 165 | 165 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.\nConcealed work, including cutting chases and making good the walls etc. (DSR 2018/18.8) | BI01010001010000000000000515BI0100001276 | ||
| 166 | 166 | (DSR 18.8.1) 15mm dia of pipeline (409.65 - 10%) | BI01010001010000000000000515BI0100001277 | 50.29 | Rmt |
| 167 | 167 | (DSR 18.8.2) 20 mm dia nominal bore (478.15 - 10%) | BI01010001010000000000000515BI0100001278 | 237.74 | Rmt |
| 168 | 168 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.\nExternal work | BI01010001010000000000000515BI0100001279 | ||
| 169 | 169 | a) 32 mm dia of pipeline (679.15 - 10%) | BI01010001010000000000000515BI0100001280 | 76.2 | Rmt |
| 170 | 170 | Providing , fixing and jointing union coupling in CPVC. Pipelines complete in all respect.\n | BI01010001010000000000000515BI0100001281 | ||
| 171 | 171 | 20 mm dia | BI01010001010000000000000515BI0100001282 | 25 | Each |
| 172 | 172 | 25 mm dia | BI01010001010000000000000515BI0100001283 | 2 | Each |
| 173 | 173 | 40 mm dia | BI01010001010000000000000515BI0100001284 | 5 | Each |
| 174 | 174 | Providing and fixing gate valve complete and respect\n | BI01010001010000000000000515BI0100001285 | ||
| 175 | 175 | 20 mm dia | BI01010001010000000000000515BI0100001286 | 10 | Each |
| 176 | 176 | 25 mm dia | BI01010001010000000000000515BI0100001287 | 1 | Each |
| 177 | 177 | 40 mm dia | BI01010001010000000000000515BI0100001288 | 1 | Each |
| 178 | 178 | Providing and fixing in position GI tank nipple ISI mark of approved make NS 40 mm dia | BI01010001010000000000000515BI0100001289 | 2 | Each |
| 179 | 179 | 20 mm dia | BI01010001010000000000000515BI0100001290 | 12 | Each |
| 180 | 180 | Providing and fixing C.P. Brass extension nipple 15 mm X 50mm dia complete in all respect. NS | BI01010001010000000000000515BI0100001291 | 82 | Each |
| 181 | 181 | Providing and fixing C.P. flanged complete in all respect. NS | BI01010001010000000000000515BI0100001292 | 82 | Each |
| 182 | 182 | Pdg. & fixing SWR PVC pipe classic type ‘B’ and specials ISI marked (Kissan, Prince, Ravindra, Finolex make) including fitting joint with solvent mixture complete in all respect- | BI01010001010000000000000515BI0100001293 | ||
| 183 | 183 | a) 110mm dia | BI01010001010000000000000515BI0100001294 | 100.28 | Rmt |
| 184 | 184 | b) 90 mm dia | BI01010001010000000000000515BI0100001295 | 22.86 | Rmt |
| 185 | 185 | Special for 110mm dia pipe | BI01010001010000000000000515BI0100001296 | ||
| 186 | 186 | Clamp | BI01010001010000000000000515BI0100001297 | 50 | Each |
| 187 | 187 | Cowel | BI01010001010000000000000515BI0100001298 | 7 | Each |
| 188 | 188 | Bend | BI01010001010000000000000515BI0100001299 | 20 | Each |
| 189 | 189 | Socket | BI01010001010000000000000515BI0100001300 | 20 | Each |
| 190 | 190 | Single Junction wiith door | BI01010001010000000000000515BI0100001301 | 2 | Each |
| 191 | 191 | Plane Tee | BI01010001010000000000000515BI0100001302 | 10 | Each |
| 192 | 192 | P Trap | BI01010001010000000000000515BI0100001303 | 2 | Each |
| 193 | 193 | Floor Trap/ Nahani Trap | BI01010001010000000000000515BI0100001304 | 15 | Each |
| 194 | 194 | Special for 90 mm dia pipe | BI01010001010000000000000515BI0100001305 | ||
| 195 | 195 | Bend | BI01010001010000000000000515BI0100001306 | 10 | Each |
| 196 | 196 | Single Junction wiith door/Y Tee | BI01010001010000000000000515BI0100001307 | 2 | Each |
| 197 | 197 | Cowel | BI01010001010000000000000515BI0100001308 | 7 | Each |
| 198 | 198 | Clamp | BI01010001010000000000000515BI0100001309 | 20 | Each |
| 199 | 199 | Socket | BI01010001010000000000000515BI0100001310 | 10 | Each |
| 200 | 200 | Plane Tee | BI01010001010000000000000515BI0100001311 | 5 | Each |
| 201 | 201 | Floor Trap/ Nahani Trap | BI01010001010000000000000515BI0100001312 | 7 | Each |
| 202 | 202 | Providing and fixing zink coated clamp for 75 to 150 mm dia pipes i/c cost of 12 mm screwed GI rod and fastener in RCC roof complete | BI01010001010000000000000515BI0100001313 | 10 | Each |
| 203 | 203 | Providing and fixing in position best quality SS sink (glossy) with complete fitting Jayana make size 1145 X 510 mm with bowl of size 550 X404 X 250. (NS) | BI01010001010000000000000515BI0100001314 | 1 | Each |
| 204 | 204 | P&F best Indian make Orissa type W.C. with using double push button pvc cistern suit complete with 100 mm P-trap ISI marked with 32mm dia flush pipe of PVC bend complete in all respects NS | BI01010001010000000000000515BI0100001315 | 1 | Each |
| 205 | 205 | Providing and Fixing white vitrous china extended wall mounting water closet of size 735*350*655 mm of approved shape including providing & fixing white china cistern with dual flush fitting, of flushing capacity 3ltr/6ltr. Including seat cover and cistern fittings , nuts , bolts and gaskat i/c Jet complete NS | BI01010001010000000000000515BI0100001316 | 6 | Each |
| 206 | 206 | P&F Oval shaped under / over counter Wash basin make CERA or Equivalent incl cost of 32 mm dia CP waste or as specified by engr-in-charge complete in all respects NS | BI01010001010000000000000515BI0100001317 | 6 | Each |
| 207 | 207 | Providing and fixing in position 15 mm i/d C.P brass bib Cocks of best quality (as required by Engineer-in-charge) | BI01010001010000000000000515BI0100001318 | ||
| 208 | 208 | (a ) Bib cock (Jaquar Make Cat No. SQT-511) or Equivalent | BI01010001010000000000000515BI0100001319 | 7 | Each |
| 209 | 209 | (b) Long body (Jaquar Make Cat No. SQT-512) or Equivalent | BI01010001010000000000000515BI0100001320 | 12 | Each |
| 210 | 210 | Providing and fixing in position C.P brass stop cocks (as Approved by the Engineer-in-charge) | BI01010001010000000000000515BI0100001321 | ||
| 211 | 211 | (a) 15MM STOP COCK | BI01010001010000000000000515BI0100001322 | ||
| 212 | 212 | (I) Stop cock male and female end (Jaquar Make Cat No. SQT-526) or Equivalent | BI01010001010000000000000515BI0100001323 | 20 | Each |
| 213 | 213 | (ii) concealed stop cock with flange (Jaquar Make Cat No. SQT-514 E) or Equivalent | BI01010001010000000000000515BI0100001324 | 12 | Each |
| 214 | 214 | Providing and fixing CP shower of Jaquar make Model No. 497N ALIED or Equivalent as per approved makes complete in all respects as per appved by Engineer-in-Charge.. | BI01010001010000000000000515BI0100001325 | 7 | Each |
| 215 | 215 | Providing and fixing glass corner in toilet Jaqaure make Model No. 1173or Equivalent as per approved makes complete in all respects as per appved by Engineer-in-Charge. NS | BI01010001010000000000000515BI0100001326 | 7 | Each |
| 216 | 216 | Providing and fixing soap dish Jaquare make Cat. No. 1177 N or Equivalent as per approved makes complete in all respects as per appved by Engineer-in-Charge. NS | BI01010001010000000000000515BI0100001327 | 7 | Each |
| 217 | 217 | Providing and fixing Towel ring Jaqare make Model No. 1121 N or equovalent as per approved makes complete in all respects as per appved by Engineer-in-Charge. NS | BI01010001010000000000000515BI0100001328 | 7 | Each |
| 218 | 218 | Providing and fixing in Position best Indian make Towel Rails Jaquar make Cat. No. AEC-1111 B complete in all respect. (NS) | BI01010001010000000000000515BI0100001329 | 7 | Each |
| 219 | 219 | Providing and fixing CP toilet paper holder Jaqare make Model No. 1153 N or equovalent as per approved makes complete in all respects as per appved by Engineer-in-Charge. NS | BI01010001010000000000000515BI0100001330 | 7 | Each |
| 220 | 220 | Providing and fixing CP bottle trap Jaqare make Model No. 773 ALIED or equovalent as per approved makes complete in all respects as per appved by Engineer-in-Charge. NS | BI01010001010000000000000515BI0100001331 | 7 | Each |
| 221 | 221 | Pdg. and fixing in position CP jali ( brass ) of heavy quality,100mm dia of standard make approved by Engineer Incharge, complete in all respect (make, Viking, Chilly, Camry) (NS) | BI01010001010000000000000515BI0100001332 | 24 | Each |
| 222 | 222 | P/F in Position 6 mm thick looking mirror with screws i/c cost of synthetic wood beading of brawn water proofing ply of 6 mm thickness complete in all respects NS | BI01010001010000000000000515BI0100001333 | 3.9 | Sqm |
| 223 | 223 | Providing & stringing out D.I. pipes 100 mm dia and specials laying the same in trenches to correct alignment and gradient i/c cutting, jointing and testing complete in all respect NS | BI01010001010000000000000515BI0100001334 | 45.72 | Rm |
| 224 | 224 | Providing and Fixing in position mono block moter1 HP of reputed make like KSB/Texmo/Crompton Etc complete in all respects. NS | BI01010001010000000000000515BI0100001335 | 1 | Each |
| 225 | 225 | TOTAL NS (P.H) | BI01010001010000000000000515BI0100001336 | ||
| 226 | 226 | E.I HSR | BI01010001010000000000000515BI0100001337 | ||
| 227 | 227 | Supply and Erection of molded case circuit breaker on wall or on existing pedestal i/c bonding to earth and necessary connection as per HSR 31.12 c (C.P @75%) ii) 100 to 200 amp MCCB | BI01010001010000000000000515BI0100001338 | 1 | Each |
| 228 | 228 | Supply and Erection of miniature circuit breaker/isolator 240/415 Volts in existing distribution board i/c making necessary connections, as per HSR 31.17 (C.P.@ 40%) (A) Miniature circuit breakers of 9 KA breaking capacity. ii) SPMCB 6 Amp to 32 amp | BI01010001010000000000000515BI0100001339 | 46 | Each |
| 229 | 229 | iii) SPN MCB 63 amp | BI01010001010000000000000515BI0100001340 | 1 | Each |
| 230 | 230 | ii) TPMCB 40 Amp to 63 amp | BI01010001010000000000000515BI0100001341 | 1 | Each |
| 231 | 231 | iii) TPN MCB 40 Amp to 63 amp | BI01010001010000000000000515BI0100001342 | 1 | Each |
| 232 | 232 | Supply and Erection OF FITTING AND ACCESSORIES as per HSR 31.18 (C.P.@ 200%) xi) Bakilite angle/straight button holder large size. | BI01010001010000000000000515BI0100001343 | 34 | Each |
| 233 | 233 | xxvi) S/E of hexagonal MS box 1.6mm thick, 8cm,7.5cm deep top covered with MS lid by means of screws i/c 10mm dia. 30cm long MS rod made into suitable suspension hook & with 3mm thick backlite sheet erected in RCC slab complete. | BI01010001010000000000000515BI0100001344 | 14 | Each |
| 234 | 234 | Supply and erection of PVC pipe of 6 kg. pressure laid 1 metre below ground level complete including digging refilling of the trench with jointing etc.a) PVC pipe 120 mm dia. HSR 31.21(C.P.@ 350 %) | BI01010001010000000000000515BI0100001345 | ||
| 235 | 235 | b) PVC pipe 80 mm dia. | BI01010001010000000000000515BI0100001346 | 145 | Meter |
| 236 | 236 | Earthing HSR-31.22 CP-400% | BI01010001010000000000000515BI0100001347 | ||
| 237 | 237 | i) Earthing with G.I earth pipe 4.5 mm long and 40 mm dia with masonry enclosures on the top etc as required. | BI01010001010000000000000515BI0100001348 | 2 | Each |
| 238 | 238 | ii) Extra for using salt and charcoal/coke for for pipe earth electrode as required. | BI01010001010000000000000515BI0100001349 | 2 | Each |
| 239 | 239 | xii) Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I wire in 15 mm dia G.I. pipe from earth electrode as required. | BI01010001010000000000000515BI0100001350 | 45 | Meter |
| 240 | 240 | Supply and Erectionof under ground cable loose in existing pipe or trenches including necessary connection, digging and refilling of trenches as per HSR 31.26 (C.P.@ 200 %) (xxvi) 35Sq. mm 3.5 Core Cable . | BI01010001010000000000000515BI0100001351 | 100 | Mtr |
| 241 | 241 | (v) 16Sq. mm 2 Core Cable . | BI01010001010000000000000515BI0100001352 | 82 | Mtr |
| 242 | 242 | xv) Supply and erection of 32 mm dia G I bracket 1.5 meter long making an angle 10degree to 15 degree with horizontal; plane for mounting street light fixing of GI bracket on wall with 2 nos 32mmx3mm thick MS clamps including cost of cutting welding of GI pipe complete with cement sand mixture,bolts and nuts etc.including necessary connections.(HSR 31.30) CP 300% | BI01010001010000000000000515BI0100001353 | 8 | Each |
| 243 | 243 | Supply & Erection PVC unsheathed Copper conductor cable single core 1100 Volts grade in pipe of suitable size( excluding cost and erection of pipe), as per HSR 31.40 (C.P.@40%) | BI01010001010000000000000515BI0100001354 | ||
| 244 | 244 | i)Size 1.5 sqmm ( 3/0.81 ) | BI01010001010000000000000515BI0100001355 | 2756.2 | Mtr |
| 245 | 245 | iii) Size 4 sqmm ( 7/0.85 ) | BI01010001010000000000000515BI0100001356 | 790 | Mtr |
| 246 | 246 | v) Size 10 sqmm | BI01010001010000000000000515BI0100001357 | 50 | Mtr |
| 247 | 247 | vi)16 sqmm | BI01010001010000000000000515BI0100001358 | 60 | Mtr |
| 248 | 248 | SHEET STEEL ENCLOSURE: Supply & erection of sheet steel enclosure Double door distribution boards suitable for MCBs etc. recessed in wall with rag bolts i/c bonding to earth& necessary connections, as per HSR 31.41 (C.P.@ 20%) | BI01010001010000000000000515BI0100001359 | ||
| 249 | 249 | iii) 12-way , SP&N ( Horizontal) | BI01010001010000000000000515BI0100001360 | 1 | Each |
| 250 | 250 | vii) 12-way , TP&N (Horizontal) | BI01010001010000000000000515BI0100001361 | 1 | Each |
| 251 | 251 | xi) 12-way , TP&N ( Vertical) (8+24) | BI01010001010000000000000515BI0100001362 | 1 | Each |
| 252 | 252 | P/F modular type accessories of approved make in existing box i/c fixing and making necessary connection, complete in all respect.( HSR 31.56) CP-10% Fan Regulator | BI01010001010000000000000515BI0100001363 | 14 | Each |
| 253 | 253 | 10 amp. 1 way switch | BI01010001010000000000000515BI0100001364 | 105 | each |
| 254 | 254 | 10 amp. Socket | BI01010001010000000000000515BI0100001365 | 27 | each |
| 255 | 255 | Bell Push | BI01010001010000000000000515BI0100001366 | 2 | each |
| 256 | 256 | Blinking plate | BI01010001010000000000000515BI0100001367 | 81 | Each |
| 257 | 257 | Call bell | BI01010001010000000000000515BI0100001368 | 2 | Each |
| 258 | 258 | P/F GI concealed sheet metal boxes with inner and outer faceplate i/c concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respect. HSR-31.57 CP-10% 1&2 Modules | BI01010001010000000000000515BI0100001369 | 20 | Each |
| 259 | 259 | S/E Mark double walled corrugated HDPE,Pipe laid 1 mtr below ground level inculding diging and refilling of earth inculding complete the job in all respect upto the entire satisfaction of Engineer incharge of the work HSR 31.67 CP-10% ii) HDPE Pipe 90/75mm outer dia/inner dia | BI01010001010000000000000515BI0100001370 | 30 | mtr |
| 260 | 260 | HSR 31.78 ( CP 0%) Supply and laying of multi coretelephone cable conductor size0.51 mm bright annealed copper conductor pvc injuctedandsealed inexisting pipe/channel andmaking necessary connections complete in all respect upto entire satisfaction of EIC of the work.i) 2 pair Telephone wire | BI01010001010000000000000515BI0100001371 | 170 | meter |
| 261 | 261 | TOTAL HSR E.I | BI01010001010000000000000515BI0100001372 | ||
| 262 | 262 | E.I NS PART | BI01010001010000000000000515BI0100001373 | ||
| 263 | 263 | Wiring with 1.5 sqmm PVC insulated copper conductor cable in 25 mm dia P.V.C. Conduit pipe, heavy gauge, ISI marked (recessed type) including cost of PVC pipe, modular metal box of suitable size with modular inner & outer face plates,copper wire,switch and sockets(modular type)screws, making necessary connections & testing complete in all respect. Fan point (ii) Medium Point | BI01010001010000000000000515BI0100001374 | 12 | Each |
| 264 | 264 | (iii) Long Point | BI01010001010000000000000515BI0100001375 | 2 | Each |
| 265 | 265 | Light Point (i) Short Point | BI01010001010000000000000515BI0100001376 | 27 | Each |
| 266 | 266 | (ii) Medium Point | BI01010001010000000000000515BI0100001377 | 39 | Each |
| 267 | 267 | iii) Long Point | BI01010001010000000000000515BI0100001378 | 58 | Each |
| 268 | 268 | Twin control light point with two way 10 Amp. single pole switch. | BI01010001010000000000000515BI0100001379 | ||
| 269 | 269 | iii) Long Point | BI01010001010000000000000515BI0100001380 | 4 | Each |
| 270 | 270 | Call bell point i/c M S Box for call bell.c) Long Point | BI01010001010000000000000515BI0100001381 | 2 | Each |
| 271 | 271 | 5 Pin 10 AMP plug point including earthing the 3rd pin with 1.50 sqmm copper insulatd earth wire. a)Short point | BI01010001010000000000000515BI0100001382 | 23 | Each |
| 272 | 272 | (ii) Medium Point | BI01010001010000000000000515BI0100001383 | 29 | Each |
| 273 | 273 | c) Long Point | BI01010001010000000000000515BI0100001384 | 4 | Each |
| 274 | 274 | 5 Pin 20 AMP switch & 16 Amp socket including earthing the 3rd pin with 1.50 Sqmm copper insulated earth wire. (wiring with 4 Sqmm copper wire ) c) Long Point | BI01010001010000000000000515BI0100001385 | 34 | Each |
| 275 | 275 | S/E PVC pipe ISI Marked heavy guage i/c bend inspection box etc., i/c laying of pipe in slab or wall complete with all patty material required to complete the job in all respect. (Recessed Type) (i) Size 25 mm dia | BI01010001010000000000000515BI0100001386 | 1057.7 | Mtr |
| 276 | 276 | (ii) Size 32 mm dia | BI01010001010000000000000515BI0100001387 | 100 | Mtr |
| 277 | 277 | Supply and Erection 250mm dia PVC body exhaust fan with louver shutter of suitable size for single phase AC 230 volts 50 Hz, 1210 RPM and capacitor run, complete in all respect. (Model - Ventilair DX in Havell's Make and Brisk AIR in Crompton greaves make) | BI01010001010000000000000515BI0100001388 | 8 | Each |
| 278 | 278 | S/E of ISI marked propeller type ventilating fans (Exhaust fan/ Fresh air fan) suitable for single phase 230 Volt, 50 Hz AC, capacitor run complete with mounting rings with four no. fixing holes without regulator as per Rate contract specification with all labour and petty material required Havells- make & model - Turboforce / Crompton greaves - Make & model Heavy duty ) Size 300mm sweep | BI01010001010000000000000515BI0100001389 | 1 | Each |
| 279 | 279 | S/E of aluminium anodozied louver shutter for exhaust fan (thickness of Frame 1.00mm & blade thickness 0.80 mm ) including all labour and other petty material required to complete the job. (canon , National make ) Size 300 mm sweep | BI01010001010000000000000515BI0100001390 | 1 | Each |
| 280 | 280 | S/E of surface mounting LED Batten fitting 1x18 watt (4 feet long ) made of high grade poly carbonate body provided for efficient heat dissipation & integrated electronic driver suitable for single phase AC 230 volts , 50 HZ supply complete in all respect. Bajaj model BCLSB 18w or Equivalent of other makes) | BI01010001010000000000000515BI0100001391 | 44 | Each |
| 281 | 281 | S/E of post top lantren luminare suitable for 1x45 watt retrofit LED threded type fixed on existing wall the work will be complete in all respect. | BI01010001010000000000000515BI0100001392 | 3 | Each |
| 282 | 282 | Supply and Erection of Street Light LED luminaire 45 Watt suitable for operation on 230 Volts A.c supply.( Havell's) | BI01010001010000000000000515BI0100001393 | 8 | Each |
| 283 | 283 | Supply and erection of modular type switch socket accessories on existing modular box.a) Modular T.V socket one module | BI01010001010000000000000515BI0100001394 | 5 | Each |
| 284 | 284 | b) Motor starter 25 amp, 2 moudle (for AC point) | BI01010001010000000000000515BI0100001395 | 5 | Each |
| 285 | 285 | c) Computer Jack RJ-45 | BI01010001010000000000000515BI0100001396 | 10 | Each |
| 286 | 286 | d) Telephone Jack RJ-11 | BI01010001010000000000000515BI0100001397 | 6 | Each |
| 287 | 287 | S/e of round co axial cable for TV of size RG 6 with electrolytic grade solid bare copper conductor polyethlene foam insulation with laminated aluminium tape and wire brand jeely flooded and pvc black jacket in existing pipe complete in all respect i/c making necessary connections etc. (Approved vide EE(P) no 53 dated 05.01.2016) | BI01010001010000000000000515BI0100001398 | 130 | Meter |
| 288 | 288 | S/E of 4 pair UTP CAT-6 cable in existing pipe including all labour and petty material required to complete the job in all respect(excluding cost and erection of pipe) | BI01010001010000000000000515BI0100001399 | 260 | mtr |
| 289 | 289 | S/E of A.C.ceiling fan,1200mm sweep, capacitor type,Copper wound, with double ball bearing complete with capacitor, 300 mm down rod, canoppies, shackles, three no. blades made of aluminum alloy suitable for single phase AC 230 V 50 Hz supply without regulator 5 star rating Efficiencia new (BLDC 26W) Make havells or equivalent as per brand lists attached. i) Size 1200 mm sweep | BI01010001010000000000000515BI0100001400 | 10 | Each |
| 290 | 290 | S/E of A.C.ceiling fan,1400mm sweep, capacitor type,Copper wound, with double ball bearing complete with capacitor, 300 mm down rod, canoppies, shackles, three no. blades made of aluminum alloy suitable for single phase AC 230 V 50 Hz supply without regulator Model ES-50 Make Havells or equivalent as per brand list attached. | BI01010001010000000000000515BI0100001401 | 4 | Each |
| 291 | 291 | LED 18 W Square Bajaj BZRSQL18WWH or Equivalent | BI01010001010000000000000515BI0100001402 | 12 | Each |
| 292 | 292 | Supply and erection of copper refrigerant pipe for AC recessed in wall with PVC copper wire 4 core 2.5 sqmm complete in all respect inculding all labour and petty material | BI01010001010000000000000515BI0100001403 | 25 | mtr |
| 293 | 293 | S/E of 70/80 W Flood Light mounted under canopy luminaire with IP66 protection suitable for 220 V,50 Hz supply.Make Crompton as per brand list approved complete in all respect | BI01010001010000000000000515BI0100001404 | 2 | Each |
| 294 | 294 | S/E of PVC hard drain pipe of 25mm dia inculding PVC Tee,Elbow,complete in all respect | BI01010001010000000000000515BI0100001405 | 40 | mtr |
| 295 | 295 | Total N S | BI01010001010000000000000515BI0100001406 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
