Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 27-07-2021 | Postponement of Tender | Date | 05-08-2021 |
| 2 | 15-07-2021 | Amendment to tender documents | Terms and Conditions | 28-07-2021 |
| 3 | 14-07-2021 | Postponement of critical dates | Date | 28-07-2021 |
| 4 | 12-06-2021 | Postponment of critical dates | Date | 21-07-2021 |
| 5 | 31-05-2021 | Amendment in critical dates | Date | 21-06-2021 |
| 6 | 18-05-2021 | Amendment in critical dates of tender | Date | 07-06-2021 |
| Name of Work: ADDN / ALTERATION INCL REPAIR TO OTM ACCN BLDG NO P-1325, P-1326, P-1327, 532 AND 533 AT HISAR MIL STN UNDER GE HISAR | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Demolition and breaking up drain pipes (salt glazed stone ware, AC or reinforced concrete) set in cement mortar internal dia of pipe 150mm complete all as specified and directed. | 70 | RM | |
| 2 | 2 | Dismantling of cast iron pipes any size of bore as in soil waste or vent pipe and all fittings including removal of cement joints fixed to wall or laid in floor complete all as specified and directed. | 200 | RM | |
| 3 | 3 | Demolition of Reincorced cement concrete in any position,Roofs ,beams, chajjas , roof fascia etc & disposal of rubbish off the premises. | 5 | CUM | |
| 4 | 4 | Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thickness (below or above ground level.) & removing unserviceable materials in low laying area, complete, all as directed. | 100 | CUM | |
| 5 | 5 | Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc all as directed. | 7000 | SQM | |
| 6 | 6 | Demolition of brick/stone masonry built in cement/lime mortar of any mix and stacking serviceable stones aside for reuse & removing unserviceable materials in low laying area, complete, all as directed. | 40.75 | CUM | |
| 7 | 7 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises. | 1600 | SQM | |
| 8 | 8 | Taking down shutters of any description, exc 1 sqm and n.exc 2sqm each and removal from site etc complete all as specified and directed. | 15 | EACH LEAF | |
| 9 | 9 | Taking down chowkat or frame with shutters area not exc 1.5 Sqm each (without taking off the shutters from the frame) including cutting holes for hold fasts & making good complete all as specified. | 110 | EACH | |
| 10 | 10 | Taking down chowkat or frame with shutters area exc 1.5 Sqm but not exc 4 Sqm each (without taking off the shutters from the frame) including cutting holes for hold fasts & making good complete all as specified. | 20 | EACH | |
| 11 | 11 | Excavating in trenches not exc 1.5 metre wide and not exc 1.5 metre in depth for foundation or for shafts, walls, manholes, laying of cables, pipes etc not exc 10 Sqm on plan and getting out in soft/loose soil. | 65 | CUM | |
| 12 | 12 | Returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25 cm thick in soft/loose soil. | 34 | CUM | |
| 13 | 13 | Removal of excavated soil/ material to a distance not exc 50 metre and depositing where directed at a level not exc 1.50 metre above the starting point complete all as specified. | 31 | CUM | |
| 14 | 14 | M&L cement concrete (1:3:6) type C1 using 20 mm graded stone aggregate as in surface channels and drains and benching including finishing the top of benching even and smooth using extra cement \nNote : Forming fair finished channel for drain using extra cement shall be measured and paid for separately. | 1.5 | CUM | |
| 15 | 15 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc. | 50 | RM | |
| 16 | 16 | M&L for precast RCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in landings, cover slabs (for man holes, drains etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including placing in position and set in CM (1:6) complete all as specified & as directed.\nNote :- Reinforcement shall be measured and paid for separately. | 1.5 | CUM | |
| 17 | 17 | M&L for cement concrete 1:2:4 type B1, using 20mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified. | 3.5 | CUM | |
| 18 | 18 | M&L reinforced cement concrete M-25 grade (Design mix) using 20mm graded stone aggregate as in beams,cantilever, bressummers, lintel over 1.5m span complete all as specified and directed.\nNote :- Reinforcement & formwork shall be measured and paid for separately.\n | 1.2 | CUM | |
| 19 | 19 | M&L reinforced cement concrete M-25 grade (Design mix) using 20mm graded stone aggregate in slabs supported on walls, beams and columns in floors, roofs, shelves and the like.\nNote :- Reinforcement & formwork shall be measured and paid for separately.\n | 3.8 | CUM | |
| 20 | 20 | M&L Formwork to sides and soffits of floor or roof beam, beam haughings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams etc for flat rough finished surface complete all as specified and directed. | 25 | SQM | |
| 21 | 21 | M&L formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete all as specified. | 80 | SQM | |
| 22 | 22 | M&L for brick work using old size flyash bricks as specified in clasue 6 of Particular specification, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6 complete all as specified. | 30 | CUM | |
| 23 | 23 | M&L for brick work using old size sub class 'B' bricks as specified in clasue 6 of Particular specification, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6 complete all as specified. | 5 | CUM | |
| 24 | 24 | M&L brick work using old size flyash bricks as specified in clasue 6 of Particular specification, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified. | 40 | SQM | |
| 25 | 25 | M&L brick work using old size sub class 'B' bricks as specified in clasue 6 of Particular specification, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified. | 10 | SQM | |
| 26 | 26 | S&F factory made Solid PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet in stead of plain colour PVC sheet and edges will be painted to match with prelam sheet reinforced with M S square tubes, fixed in opening as per specification & drawing given in SSR Part-II . | 275 | RM | |
| 27 | 27 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded Single Side Prelam PVC 'C' channel instead of Plain colour PVC sheet 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single prelam PVC sheets used instead of plain colour PVC sheet for top rail, lock rail & bottom rail on either side having one side feathered edge and on other side 10mm 90 degree bent edgle & as gap insert for top rail & bottom rail; Panelling of single side prelam colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing of SSR Part-I complete all as specified and directed. | 76 | SQM | |
| 28 | 28 | S&F factory made 35 mm thick plain framed, paneled shutter (Two panels) with lock rail and panel of 9mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces, size of rail and styles as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated using second class Hard Wood rail and styles, fixed to chowkat, complete all as specified & directed. | 12 | SQM | |
| 29 | 29 | S&F factory made 35mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (with sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified & directed. | 12 | SQM | |
| 30 | 30 | S&F butt hinges of size 100mm medium weight, stainless steel ISI marked complete all as specified. | 175 | EACH | |
| 31 | 31 | S&F butt hinges of size 125mm medium weight, cold rolled mild steel ISI marked complete all as specified. | 10 | EACH | |
| 32 | 32 | S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised (ISI marked) complete all as specified.\n | 150 | EACH | |
| 33 | 33 | S&F 200mm long aluminium anodized barrel tower bolts of extruded section (ISI marked) complete all as specified. | 150 | EACH | |
| 34 | 34 | S&F 100mm long aluminium anodized floor door stopper double legged with rubber shoe, fixed to bottom rail of door as directed.\n | 35 | EACH | |
| 35 | 35 | S&F mild steel helical door spring 300mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified. | 15 | EACH | |
| 36 | 36 | S&F 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified. | 8 | EACH | |
| 37 | 37 | S&F stainless steel wire cloth wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. | 90 | SQM | |
| 38 | 38 | S&F in repairs stainless steel wire cloth wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. | 200 | SQM | |
| 39 | 39 | S&F in repair stainless steel curtain rod / drapery rod, 20mm dia with and including fency type bracket 2 Nos of each opening and side stopper fency type of required shape and size 2 Nos of each opening complete all as specified and directed by . | 100 | RM | |
| 40 | 40 | S&F 4mm GI wire (for the purpose to net mosquitto / drying of cloth) and adjusting the level & fixing to walls by means of cleats / holds fasts made out of GI flat 40 x 3 mm of size 300mm long with 'L' & 'T' type base of size 300mm long, 02 Nos cleats / hold fasts to be provided in required interval of GI wire and fixed in PCC bed blcok 1:2:4 type B0 (using 12.5mm graded crushed stone aggregate) of size 300x230x230mm with and including cutting / chiselling of brick walls complete all as specified and directed. | 500 | RM | |
| 41 | 41 | S&F factory made Steel windows, ISI marked, (Box Type) with side hung shutters including box type hinges with steel handle etc complete with glazing bars dovetailed or welded including one shop coat of Zinc chrome primer including making good disturbed surfaces of walls, complete.\nNotes:- (i) The rate quoted by the contractor are deemed to be included for one shop coat of red oxide zinc chrome primer on steel windows. Nothing shall extra paid on this account. \n(ii) Details of box type window shall be given on HQ CEJZ drawing No TD/2013/01 sheet 1/3, 2/3, 3/3. \n(iii) Glass pane/wire gauze shall be measured and paid separately. | 18 | SQM | |
| 42 | 42 | S&F factory made Steel windows, ISI marked, (Box Type) with side hung shutters including box type hinges with steel handle etc complete without glazing bars dovetailed or welded including one shop coat of Zinc chrome primer including making good disturbed surfaces of walls, complete.\nNotes:- (i) The rate quoted by the contractor are deemed to be included for one shop coat of red oxide zinc chrome primer on steel windows. Nothing shall extra paid on this account. \n(ii) Details of box type window shall be given on HQ CEJZ drawing No TD/2013/01 sheet 1/3, 2/3, 3/3. \n(iii) Glass pane/wire gauze shall be measured and paid separately. | 18 | SQM | |
| 43 | 43 | S&F factory made Steel ventilators with top hung shutter including box type hinges, fixed type handle and steel peg stay complete all as specified & directed. | 8.1 | SQM | |
| 44 | 44 | M&L for reinforcement TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified. | 600 | KG | |
| 45 | 45 | All as per serial item No. 44.00 here-in-before but 5 to 10mm dia in stirrups, spacers and binders. | 120 | KG | |
| 46 | 46 | S&F mild steel framed work as in steel frames, chowkats, doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing, conforming to Grade E-165 (Fe 290), complete, all as specified & directed. | 600 | KG | |
| 47 | 47 | S&F mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks, cooler stand and similar work including welding conforming to Grade E-165 (Fe 290), complete, all as specified & directed. | 810 | KG | |
| 48 | 48 | M&L in repairs, mild steel box type hinges (02 Nos) of size 50mm , 100mm long mild steel handle left or right fixed with nut & bolt, screws and washers including suitable hold fasts & peg stay for factory made steel window / ventilator including necessary cutting, welding and blacksmith works for re-alignment of window shutters along the window frame for smooth functioning for closing & opening with and including taking down shutters and re-fixing the same in position with window frame complete all as specified and directed by Engr-in-Charge. | 100 | PER LEAF JOB | |
| 49 | 49 | S&F in repairs butt hinges, medium weight, cold rolled, mild steel of size 125mm long including taking down shutters and re-fixing the same in position with door frame with and including necessary cutting & welding to existing steel door frame and necessary carpentry works for proper functioning of wooden shutters complete all as specified and directed by Engr-in-Charge. | 65 | EACH | |
| 50 | 50 | S&F anodized aluminium frame for doors, windows, ventilators, partitions with one or more rebates including joining cleat for fixing etc. complete all as specified & as directed. | 45 | KG | |
| 51 | 51 | S&F anodized aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodized aluminum snap beading screws etc. complete all as specified & as directed.\nNote : All required joinery fittings such as peg stay, hold fastner, handles, hinges etc of shutters shall be fixed all as directed by Engineer-in-charge. | 28 | SQM | |
| 52 | 52 | S&F aluminium anodized window and ventilator shutters, fixed type withour shashbar, alumimnium section weighing 0.55 Kg/m including necessary joining cleats glazing clips, rubbers packing, snap beading screws etc complete all as specified and directed. | 14 | SQM | |
| 53 | 53 | S&F anodized aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos), suitable handle (1 No.) complete all as specified & as directed. \nNote : All required joinery fittings such as peg stay, hold fastner, handles, hinges etc of shutters shall be fixed all as directed by Engineer-in-charge. | 4 | SQM | |
| 54 | 54 | S&F Anodised aluminum grill 6.25mm dia of required design and shape fixed in aluminum window with and including necessary cutting, screwing, aluminium bedding / cleats etc complete all as specified and directed. | 15 | SQM | |
| 55 | 55 | S&F Door closer aluminium (extruded section body), hydraulically regulated, designation No. 1 universal type, suitable for door shutters of 851mm to 1000mm in width and of weight between 61 to 80 kg and fixed complete all as specified & as directed. | 15 | EACH | |
| 56 | 56 | S&F mortice lock brass 4 lever vertical type size 75mm and fix in aluminium door shutter etc complete all as specified and as directed. | 15 | EACH | |
| 57 | 57 | M&L for treatment of sunken floor slab comprising of the following specifications with and including demolition of sunken floors complete all as specified and directed:-\n(i) Cleaning the sunken/lowered portion of RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chisel out any mortar sticking to the surface and brooming completely. Provision of 40mm thick avg PCC 1:2:4 type B-0 using 12.5mm graded aggregate as in padding concrete to achieve proper slope including cutting holes in bricks or RCC wall for spout.\n(ii) Rendering of uneven surfaces with 6mm thick CM 1:4 mixed with and including integral water proofing compound Sika Plastocreat plus or equivalent make in Fosroc / Thremax as approved by GE @ 0.2% by wt of cement consumed including filling it with water to check dampness and seppage and where dampness / seppage is noticed, nozzles shall be fixed and grouting carried out. \n(iii) All junctions points of side wall where CI/GI/PVC pipes are passing through shall be sealed with epoxy putty Sikaguard 694 F(I) or equivalent make in Fosroc / Thremax as approved by GE.\n(iv) After drying putty, wash the slab and sides of sunken portion with water and make it clear and clean.\n | 150 | SQM | |
| 58 | 57.01 | (v) Applying two coats of polymer modified cementious water proof coating with Sika Topseal 107 or or equivalent make in Fosroc / Thremax as approved by GE in two coats @ 3kg/sqm to sanwiched with glass fibre reinforcemnt: Sika Fab-1 or or equivalent make in Fosroc / Thremax as approved by GE over base coat as per mnaufacturer's instruction to bottom and vertical sides up to finished floor level+100mm height. The thickness of two layer shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion.\n(vi) Plaster the bottom and sides up to bottom of the skirting with minimum 20mm thick CM 1:4 mixed with integral water proofing compound SIKA plastocreat plus or equivalent make in Fosroc / Thremax as approved by GE @ 0.2% by wt of cement consumed as per manufacturer's specification including rounding of corners and injuctions sloping towards spout. \n(vii) All pipes laid in sunken portion shall be covered with 50mm thick PCC 1:3:6 all round after painting with anticorrosive paint . \n(viii) The sunken floor shall be filled with lean concrete 1:7:12. | |||
| 59 | 57.02 | Note :- \n(i) Testing of the water proofed area (ponding test) by filling water for at least 72 hours and tested for leakage seepage and to the entire satisfaction of GE. Test record for each sunken slab shall be maintained. The treatment shall be carried out by authorised applicators of chemicals. Cost of testing and all M&L is inclued in the rates quoted above.\n(ii) For Payment purpose, the Plan area of Sunken floor shall be taken into account. | |||
| 60 | 58 | M&L for treatment of RCC roof slab surface comprising to the following specifications with and including demolition of old treatment of RCC roof slab complete all as specified and directed:-\n(a) Dismantling of old roof treatment of any type any thickness any pattern including dismantling of old brick tiles and mud phuska and clean the surface up to RCC roof. \n(b) M&L for preparation of roof surfaces (old or new) with wire brush drying and cleaning to remove all foreign materials and washing with water to remove loose particles with and including providing 50 mm average thick PCC 1:2:4 type B-0 (using 20mm graded stone aggregate) with maintain the proper roof slope complete all as specified and directed.\n(c) Providing 25mm thick polymer modified plaster in ratio 1:10 (1 part of polymer and 10 parts of cement with solid contents not less than 30% over slab and applying priming coat of epoxy primer with resin and hardner with water dilution as per manufacturer instructions, applying 1st coat of solvent based polyurathene liquid membrane not less than 500 micron thick UV stable having SRI value greater than equal to 105 with consumption of 0.61 kg/sqm and applying 2nd coat solvent based polyurathene liquid mambrane not less than 500 micron thick UV stable, having SRI value greater than liquid to 105 with consumption of 0.61 Kg/Sqm over dried 1st coat complete all as specified and directed. \nMake :- Asian Paints / Pidilite / STP / Sikka | 3600 | SQM | |
| 61 | 59 | Chipping of loose/ damaged /cracked / previously repaired / delaminated or weak concrete by chieseling to expose the sound core concrete where ever required and to expose rusted reinforcement upto depth n.exc 50mm and disposal of rubbish off the premises to a distance not exc 50 mtrs including cleaning of reinforced concrete surface by air compressor complete all as specified and directed. | 83 | SQM | |
| 62 | 60 | Supply and apply of rust remover cum passivator to remove rust from existing reinforcement by using product: Rustoff-100 of Sika or equivalent make in Fosroc/ Thermax as approved by GE, with density 1.01 Kg/ltr at 30 degree celsius and consumption : 0.2 Kg/Sqm/coat complete all as specified and directed.\nNote: The material to be applied thoroughly on exposed rebars only with the help of a brush of suitable size. The area will be measured as length of bar x two times the dia of bar. | 25 | SQM | |
| 63 | 61 | Supply and apply a cement based polymer modified rebar corrosion protection system to existing reinforcement using cement based polymer modified rebar corrosion protection system with consumption : 3.75 kg/Sqm for two coats and Product requirements: carbonation resistance: 2 mm of SikaTop Armatec®-108 of Sika or equivalent make in Fosroc / Thermax as approved by GE corresponds to 20 mm of normal mortar; bond strength > 1N / Sqmm according to ASTM C 882-78 complete all as specified and directed.\nNote: The material to be applied thoroughly on exposed rebars only with the help of a brush of suitable size. The area will be measured as length of bar x two times the dia of bar. | 25 | SQM | |
| 64 | 62 | M&L for Providing, mixing & applying two component Epoxy resin concrete Bonding coat on prepared RCC surfaces as per manufacturer's specification including prepartaion of surface throughly and cleaning complete where ever required with using Product: Sikadur®-32 LP of Sika or equivalent in Fosroc / Thermax as approved by GE with Consumption: 0.4 kg/Sqm and Product requirements: Complies with ASTM C 881-78, Type II Grade 2 Class B+C complete all as specified and directed. | 50 | SQM | |
| 65 | 63 | M&L for providing by mixing and trowel application of prepacked, light weight, two component structural grade polymer modified fibre reinforced thixotropic cement mortar Sika Monotop 122F of Sika or equivalent make in Fosroc / Thermax as approved by GE at an average thickness of upto 10mm to the prepared concrete surface in soffit of slabs, beam, columns, parapets, fins and facias at any height, including finishing of applied Polymer mortar as per the technical specifications and manufacturer's instructions complete all as specified and directed . | 50 | SQM | |
| 66 | 64 | Providing and fixing of Rebar of required length and diameter with sika anchorfix@-3+/Mungo/Fischer FISV 390/Hilti RE-500 Epoxy resin RCC member including power drilling, cleaning of holes, insertion of epoxy ensure the bond as per manufacture recommendation complete as per site requirement and directed. | 50 | SQM | |
| 67 | 65 | M&L for providing, fixing shear connector of 16mm dia TOR steel upto 160mm length with Sika anchorfix @-2+Tropical or equivalent make in Fosroc / Thermax as approved by GE, epoxy resin to RCC member including power drilling, cleaning of holes, insertion of epoxy, placing shear connector in position to ensure the bond as per manufacturer's instructions complete all as specified and directed. | 50 | EACH | |
| 68 | 66 | Providing and fixing water tight centering & shuttering and Scaffolding including bolting, strutting, propping etc. including removal of form work from column, beam , slab etc. complete as per site requirement and directed. | 90 | SQM | |
| 69 | 67 | Supply and applying a ready to use non shrink, cementitious free flow micro-concrete (<100mm) using Product : SikaRep Microcrete-4 + adequate coarse aggregate, Yield : approx. 17 ltr/bag (30kg) (depending on the size and quantity of coarse aggregate added), Product : Sika Microcrete-4 or equivalent make in Fosroc / Thermax as approved by GE, Product requirements : compressive strength > 60 N/Sqmm (28 days) according to ASTM C 1107-99 complete all as specified and directed. | 2 | CUM | |
| 70 | 68 | M&L for providing and application of one coat of Water based concrete curing compound with low viscosity wax emulsion using Sika Antisol E-WP of Sika or equivalent make in Fosroc / Thermax as approved by GE, as concrete curing membrance over the applied polymer mortar as temporary curing membrance as per the technical specifications and manufacturer's instructions complete all as specified and directed. | 90 | SQM | |
| 71 | 69 | M&L for cutting V groove (15mmx10mm) along the crack line and cleaning the same with high pressure water jet and sealing with fast setting high strength Epoxy putty, solvent free, three component compound based on epoxy resins, graded fillers and thixotropic agents using Sikadur 31 of Sika or equivalent make in Fosroc / Thermax as approved by GE as per the technical specifications and manufacturer's instructions complete all as specified and directed. | 25 | RM | |
| 72 | 70 | M&L for providing and fixing 12-16mm dia injection ports non returnable nozzle by drilling cleaning and sealing holes 50-75mm deep at 200mm c/c with fast setting high strength Epoxy putty, solvent free, three component compound based on epoxy resins, graded fillers and thixotropic agents using Sikadur 31 of Sika or equivalent make in Fosroc / Thermax as approved by GE as in beams, columns and parapets as per the technical specifications and manufacturer's instructions complete all as specified and directed. | 125 | EACH | |
| 73 | 71 | M&L for 40mm thick PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in flooring, finished even and smooth with using extra cement complete all as specified & as directed. \nNote : - Glass dividing strips shall be measured and paid for separately as “Supply only” under relevant item of this Schedule. | 400 | SQM | |
| 74 | 72 | Supply only 38mm width of glass dividing strip, 3mm thick and inserted in position to conform to design complete all as specified and directed. | 100 | RM | |
| 75 | 73 | M&L for PCC 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as in levelling course 25mm thick finished fair & even complete all as specified & as directed. | 300 | SQM | |
| 76 | 74 | M&L for machine cut Kota stone slab flooring 20 to 25mm thick laid over & including screed bed or bedding layer of 15mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified. \nNote : -(i) Kota stone for floor shall be of size 550mm x 550mm (minimum) when brought at site. \n(ii) Kota stone for trades of stairs shall be in one piece of lenght and width of trades as per site requirement as directed. | 150 | SQM | |
| 77 | 75 | M&L machine cut Kota stone slab 15 to 20mm thick , as in skirting etc. laid over & including screed bed or bedding layer of 10mm thick in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified. Note : - Kota stone for risers of stairs shall be in one piece of lenght and width of risers as per site requirement as directed. | 20 | SQM | |
| 78 | 76 | M&L for Granite (of any type) tiles 18-20mm thick machine cut, as in floor, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid over & including 20mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed. | 15 | SQM | |
| 79 | 77 | M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified & directed. \n\n | 200 | RM | |
| 80 | 78 | M&L for non skid ceramic/Matt finish, jointless, digital tiles (coloured) 7 to 8mm thick, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed. \nNote :- Shade and type of tiles shall be procured as approved by the GE. | 800 | SQM | |
| 81 | 79 | M&L for non skid ceramic/Matt finish, jointless, digital tiles (coloured) 7 to 8mm thick, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in vertical surfaces such as dado, skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 10mm thick screed plaster in cement & sand mortar 1:4 complete all as specified and as directed. \nNote :- Shade and type of tiles shall be procured as approved by the GE. | 60 | SQM | |
| 82 | 80 | M&L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (Digital shade as approved), area of each tile exceeding 0.36 Sqm but not exceeding 0.42 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and directed. \nNote :- Shade and type of tiles shall be procured as approved by the GE. | 50 | SQM | |
| 83 | 81 | M&L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (Digital shade as approved), area of each tile exceeding 0.36 Sqm but not exceeding 0.42 Sqm, on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 10mm thick screed bed in cement & sand mortar 1:4 complete all as specified and as directed \nNote :- Shade and type of tiles shall be procured as approved by the GE. | 10 | SQM | |
| 84 | 82 | M&L for coloured digital printed designer glazed ceramic tiles of size 300mm x 600mm, 7-8mm thick as in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed. \nNote :- Shade and type of tiles shall be procured as approved by the GE. | 120 | SQM | |
| 85 | 83 | M&L glazed ceramic coloured digital printed designer tiles of size 450mm x 300mm x 7mm thick on vertical surfaces such as dado etc set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile laid over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.\nNote :- Shade and type of tiles shall be procured as approved by the GE. | 690 | SQM | |
| 86 | 84 | M&L for 75 mm thick PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in plinth protection surface finished fair and even complete all as specified. \nNote :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3). | 1300 | SQM | |
| 87 | 85 | M&L for rendering 15mm thick in cement mortar 1:4 on faces of brick work or concrete surfaces, finished even and smooth without using extra cement mixed with and including liquid water proofing compound @200 ML per 50 KG by weight of cement complete all as specified and directed. | 4000 | SQM | |
| 88 | 86 | M&L for rendering 12mm thick in cement mortar 1:6 on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified. | 1500 | SQM | |
| 89 | 87 | M&L rendering 5mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified. | 500 | SQM | |
| 90 | 88 | M&L for rough cast finish plaster by applying the under coat of cement and sand mortar 1:3 not less than 10 mm thick and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (size between 6 to 12 mm depending on the texture required) mixed with coarse sand and cement in the ratio of 1: 1: 1 shall be applied and finished even complete . | 980 | SQM | |
| 91 | 89 | M&L for preparation of newly plastered surfaces of ceilings & applying three coats of white wash complete all as specified. | 500 | SQM | |
| 92 | 90 | M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc including preparation of plastered surfaces of walls and applying two coats of white wash complete all as specified | 3000 | SQM | |
| 93 | 91 | M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and including preparation of plastered surfaces of ceiling and applying two coats of white wash complete all as specified | 4500 | SQM | |
| 94 | 92 | M&L for preparation of new plastered surfaces and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over a coat of primer on walls including applying 2mm thick wall care putty all as specified & as directed. | 1500 | SQM | |
| 95 | 93 | M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint over a coat of primer on walls all as specified & as directed. | 3500 | SQM | |
| 96 | 94 | M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over a coat of primer on walls including applying 2mm thick wall care putty complete all as specified & as directed. | 8800 | SQM | |
| 97 | 95 | M&L for preparation of plastered surface of walls new / old surfaces including plaster / cornices etc and applying two coats of Acrylic emulsion (exterior weather coat) paint of any tint as approved over one coat of primer of same make applied as per manufacturers instruction complete all as specified and directed.\nNote : The work under this item shall be carried out by contractor from authorised applicator of manufacturer by using modern technique. The contractor shall also furnish guarantee of the quality and finish work under this item for a period of five years from certified date of completion of complete work for which an amount ? 20 Per Sqm of quantity of work done under this item shall be retained in final bill. This amount shall be returned only after completion of guarantee period. | 1500 | SQM | |
| 98 | 96 | M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces and applying two coats of cement base paint of approved shade/tint over a coat of primer complete all as specified | 5000 | SQM | |
| 99 | 97 | S&F polycarbonate transparent sheets 3mm thick in square / rectangular area of each pane not exc 0.5 sqm and fixed /lock with window frame by using PVC snap beeding with necessary self tapping reviting / screwing and suitable method as directed. | 15 | SQM | |
| 100 | 98 | S&F in repair polycarbonate transparent sheets 3mm thick in square / rectangular area of each pane not exc 0.5 sqm and fixed /lock with window frame by using PVC snap beeding with necessary self tapping reviting / screwing and suitable method as directed. | 150 | SQM | |
| 101 | 99 | S & F 5.5mm thick dark coloured tinted sheet glass in glazing to aluminium door, window & partition including pad/gasket all as specified and directed. | 25 | SQM | |
| 102 | 100 | M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified and directed. | 50 | SQM | |
| 103 | 101 | M&L for preparation of old surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified and directed. | 1600 | SQM | |
| 104 | 102 | M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of zinc chrome primer complete all as specified and directed. | 380 | SQM | |
| 105 | 103 | Material and labour for preparation of new steel surfaces (already applied with coat of primer) of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint of approved tint on existing primer complete all as specified and directed. | 70 | SQM | |
| 106 | 104 | M&L for preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint of approved tint all as specified & as directed. | 4000 | SQM | |
| 107 | 105 | Taking up or down 15 mm bore steel / composite / UPVC tubing and connection from any position concealed / exposed including cleaning for refixing or removal to store complete all as specified and directed | 1500 | RM | |
| 108 | 106 | Taking up or down 20 mm bore steel / composite / UPVC tubing and connection from any position concealed / exposed including cleaning for refixing or removal to store complete all as specified and directed . | 1100 | RM | |
| 109 | 107 | Taking up or down 40 mm bore steel / composite / UPVC tubing and connection from any position concealed / exposed including cleaning for refixing or removal to store complete all as specified and directed . | 650 | RM | |
| 110 | 108 | S&F 15 mm dia steel water GI tube medium grade with all fittings / connections & MS clamps / clips and necessary screwing as required complete and fixed with or without concealed to walls, ceilings or laid in floors complete all as specified and directed | 800 | RM | |
| 111 | 109 | Fixing only GI water tubing 15 mm bore, medium grade, with & including supply & fixing all new fittings (ISI marked) / connections & MS clamps / clips and necessary screwing as required completeand fixed with or without concealed to walls, ceilings or laid in floors complete all as specified and directed\nNotes :- \n(i) Old serviceable water tubing retrieved from serial item No. 105.00 here-in-before shall be used.\n(ii) Quoted rate shall be deemed to include cost of GI fittings (ISI marked). Old fittings shall not be used. | 700 | RM | |
| 112 | 110 | S&F 20 mm dia steel water GI tube medium grade with all fittings / connections & MS clamps / clips and necessary screwing as required complete and fixed with or without concealed to walls, ceilings or laid in floors complete all as specified and directed | 500 | RM | |
| 113 | 111 | Fixing only GI water tubing 20 mm bore, medium grade, with & including supply & fixing all new fittings (ISI marked) / connections & MS clamps / clips and necessary screwing as required completeand fixed with or without concealed to walls, ceilings or laid in floors complete all as specified and directed\nNotes :- \n(i) Old serviceable water tubing retrieved from serial item No. 106.00 here-in-before shall be used.\n(ii) Quoted rate shall be deemed to include cost of GI fittings (ISI marked). Old fittings shall not be used. | 600 | RM | |
| 114 | 112 | S&F 40 mm dia steel water GI tube medium grade with all fittings / connections & MS clamps / clips and necessary screwing as required complete and fixed with or without concealed to walls, ceilings or laid in floors complete all as specified and directed | 300 | RM | |
| 115 | 113 | Fixing only GI water tubing 40 mm bore, medium grade, with & including supply & fixing all new fittings (ISI marked) / connections & MS clamps / clips and necessary screwing as required completeand fixed with or without concealed to walls, ceilings or laid in floors complete all as specified and directed\nNotes :- \n(i) Old serviceable water tubing retrieved from serial item No. 107.00 here-in-before shall be used.\n(ii) Quoted rate shall be deemed to include cost of GI fittings (ISI marked). Old fittings shall not be used. | 350 | RM | |
| 116 | 114 | Dismantling old unserviceable PVC water tank capacity 500 ltr and not exc 1000 ltrs & removal from site etc complete all as specified and directed. | 20 | EACH | |
| 117 | 115 | S&F 1000 Litre capacity Rotational moulded polyethylene water storage tanks (colour other than black as approved by Engineer-in-charge) triple layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I. | 20 | EACH | |
| 118 | 116 | S&F 20mm bore dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 mm - 210 gms / 25mm - 455gms / 40mm - 690 gms) complete all as specified and directed | 20 | EACH | |
| 119 | 117 | S&F in repair 15mm bore chromium plated cast copper alloy long body bib cock with wall flange fancy type with , screwed down for iron pipe or for brass ferrule and fixed complete all as specified and directed.\nMake : ESSCO of Jaquar Cat Part No ORB-105107 or equivalent of makes mentioned in Appx 'C' here-in-after. | 15 | EACH | |
| 120 | 118 | S&F in repairs Bib taps,cast copper alloy with crutch or butterfly handle, chromium plated, fancy type , screwed for iron pipe or for brass ferrule, for 15 mm bore GI pipe complete. | 100 | EACH | |
| 121 | 119 | S&F in repairs 15mm bore angular Stop Cock with Wall Flange, cast copper alloy, fancy type, chromium plated, screwed down, screwed both ends for iron pipe or for unions. \nMake : ESSCO of Jaquar Cat Part No ORB-105053 or equivalent of makes mentioned in Appx 'C' here-in-after. | 15 | EACH | |
| 122 | 120 | S&F in repairs 15mm bore angle valve, fancy type , chromium plated cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed all as specified and directed. | 90 | EACH | |
| 123 | 121 | S&F in repairs 15mm bore stop valve, fancy type , , chromium plated with long shank and cup (concealed type) cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed all as specified and directed. | 10 | EACH | |
| 124 | 122 | S&F in repair Gun metal gate valve with iron wheel head, screwed both ends for iron pipe of 20mm bore complete all as specified and directed. | 30 | EACH | |
| 125 | 123 | S&F in repair Vitrous china wash hand basin, counter top of size Size 600 x 400 x 185mm) colour brilliant / off white fixed to RCC counter with and including 32mm dia chromimum plated waste coupling and 32mm dia PVC waste pipe 90cm long etc inlet and outlet connection complete all as specified and directed.\nMake : Cat Part No SLS-WHT-6601 of Jaquar or equivalent of makes mentioned in Appx 'C' here-in-after. | 64 | EACH | |
| 126 | 124 | S&F 3-Hole Basin Mixer with popup chromium plated waste system, 20mm cartridge size complete all as specified and directed. \nMake : Cat Part No FLR-5191N of Jaquar or equivalent of makes mentioned in Appx 'C' here-in-after. | 64 | EACH | |
| 127 | 125 | S&F in repair vitreous China, squatting pan, Orissa Pattern, size 415x515x255 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with PTMT trap of suitable size ( P or S type) including connection to trap and to flushing pipe, anti syphonic pipe etc complete including provision of plain cement concrete bedding & making good to floor complete complete all as specified and directed.\nMake : ESSCO of Jaquar Cat Part No ESSCO ECS-WHT-453 or equivalent of makes mentioned in Appx 'C' here-in-after. | 60 | EACH | |
| 128 | 126 | S&F in repairs viterous China wash down water closet ( Couple closet ) single pipe (of Size 775x370x640 mm, P trap distance - 180 mm) with PP soft close seat cover, Hinges, Fixing accessories with and including PVC trap of suitable size and compete fittings and connection complete all as specified and directed.\nMake : Jaquar Cat Part No SLS-WHT-0318 or equivalent of makes mentioned in Appx 'C' here-in-after | 12 | EACH | |
| 129 | 127 | S&F in repair PVC low level cistern 10 Litre capacity, Smart Single Flush Wall Hung Cistern (Compatible with 39mm dia Drainage Pipes) Installation Kit with Drainage Pipes from cistern to pan (Suitable for Orissa Pan) with and including fittings & testing complete all as specified and directed.\nMake : ESSCO of Jaquar Cat Part No ESSCO-WHT-183NT or equivalent of makes mentioned in Appx 'C' here-in-after | 60 | EACH | |
| 130 | 128 | S&F stack clamps for 75mm dia bore pipe made out of 50mm by 5mm flat iron and 16 mm round iron stay incl bolts and nuts and securing ends stays to wall or roof complete all as specified. | 120 | EACH | |
| 131 | 129 | S&F stack clamps for 100mm dia bore pipe made out of 50mm by 5mm flat iron and 16 mm round iron stay incl bolts and nuts and securing ends stays to wall or roof complete all as specified. | 120 | EACH | |
| 132 | 130 | S&F Towel rail 600mm long, Stainless steel complete all as specified and directed. \nMake : ESSCO of Jaquar Cat Part No AEC-1111N or equivalent of makes mentioned in Appx 'C' here-in-after | 60 | EACH | |
| 133 | 131 | S&F Chromimum plated wall mixer 3-in-1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe, connecting legs & wall flange (without head and overhead shower) with and including necessary fittings complete all as specified and directed. \nMake : Cat Part No FUS-29281 of Jaquar or equivalent of makes mentioned in Appx 'C' here-in-after | 15 | EACH | |
| 134 | 132 | S&F 1200mm X 450mm bevelled edge mirror of selected quality mounted on 6mm thick AC building board or commercial ply including aluminium framing and fixed on wooden plug with chromium plated brass screws and cup washer complete all as specified and directed. \n | 48 | EACH | |
| 135 | 133 | S&F Hand Shower (Health Faucet) with 8mm Dia, 1.2 Meter Long Flexible Tube & Wall Hook complete all as specified and directed. \nMake : Jaquar Cat Part No.ALD-573 or equivalent of makes mentioned in Appx 'C' here-in-after | 15 | EACH | |
| 136 | 134 | S&F glass shelf 600mm long complete all as specified and directed. \nMake : Jaquar Cat Part No ACN-1171N or equivalent of makes mentioned in Appx 'C' here-in-after | 20 | EACH | |
| 137 | 135 | S&F toilet paper holder of brass chromium plated including screw and chromiun plate brass wooden / plastic cleats complete all as specified and directed.\nMake : Jaquar Cat Part No ACN 1151N or equivalent of makes mentioned in Appx 'C' here-in-after | 12 | EACH | |
| 138 | 136 | S&F CP hand shower pack (single flow 105mm round shape hand shower with 8 mm dia 102 M long flexible tube and wall hook suitable for hand shower complete all as specified and directed. \nMake : Jaquar Cat No.HSH-1717 or equivalent of makes mentioned in Appx 'C' here-in-after\n | 15 | EACH | |
| 139 | 137 | S&F Overhead Shower 150x150mm Square Shape Single Flow (body and face plate brass with chrome plated) with Rubit Cleaning System with and including brass chrome plated arm of lenght 450-600mm complete all as specified and directed.\nNote :- \n(i) Make : Cat Part No.OHS-1805 Jaquar or equivalent of makes mentioned in Appx 'C' here-in-after. \n(ii) Rate quoted shall deemed to included for providing chrome plated arm as specified. | 15 | EACH | |
| 140 | 138 | S&F Overhead Shower 70 mm dia Round Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System with and including brass chrome plated arm of lenght 450-600mm complete all as specified and directed.\nNote :- \n(i) Make : Cat Part No. EOS-1995 of ESSCO Jaquar or equivalent of makes mentioned in Appx 'C' here-in-after.\n(ii) Rate quoted shall deemed to included for providing chrome plated arm as specified. | 61 | EACH | |
| 141 | 139 | S&F bathroom mirror Cabinet (622x422mm) complete all as specified and directed by Engr-in-Charge. \nMake : Cat No. 557 of Prayag or equivalent of makes mentioned in Appx 'C' here-in-after | 15 | EACH | |
| 142 | 140 | S&F in repair vitreous urinal pot of Size 330x310x 420mm ,with and including suitable size CP coupling, waste pipe & Fixing Accessories with and including CP urinal spreader, half turn CP angle valve, suitable size of PVC connection and Agromech round urinal complete all as specified and directed.\nNote :- \n(i) Make of Urinal Cat Part No. ECS-WHT-253 of ESSCO Jaquar or equivalent of makes mentioned in Appx 'C' here-in-after. \n(ii) The rate quoted shall deemed to be included for providing waste coupling, waste pipe , PVC down pipe , angle valve , urinal spreader and agromech round urinal etc. | 48 | Each | |
| 143 | 141 | S&F towel ring round complete all as specified and dierected.\nMake - ESSCO of Jaquar Cat Part No AEC-1121N or equivalent of makes mentioned in Appx 'C' here-in-after | 80 | EACH | |
| 144 | 142 | S&F Corner shower basket complete all as specified and directed.\nMake- Jaquar Cat Part No ACN-1179N or equivalent of makes mentioned in Appx 'C' here-in-after | 15 | EACH | |
| 145 | 143 | S&F cloth liner retractable complete all as specified and directed.\nMake- Jaquar Cat Part No AHS-1565 or equivalent of makes mentioned in Appx 'C' here-in-after | 15 | EACH | |
| 146 | 144 | S&F in repairs vitreous china Anglo India type wash down water closet with PP normal close seat cover, Hinges, fixing accessories and accessories set of size 480x575x390mm ('S' Trap) with and including fixing to trap complerte all as specified and directed.\nMake- ESSCO of Jaquar Cat Part No. ECS-WHT-355SNPP or equivalent of makes mentioned in Appx 'C' here-in-after. | 10 | EACH | |
| 147 | 145 | S&F towel rack with lower hanger with hook complete all as specified and directed.\nMake- Jaquar Cat Part No AHS-1581H or equivalent of makes mentioned in Appx 'C' here-in-after | 15 | EACH | |
| 148 | 146 | S&F in repair single/multi PVC (SWR) floor trap 75mm dia, palin with grating including joining to waster pipe, fixed in cement concrete type B-1 (1:2:4) using 20mm graded broken stone aggregate co,mplete all as specified and directed. | 50 | EACH | |
| 149 | 147 | S&F in repairs PVC connection 450 mm long suitable for 15 mm bore GI pipe including PTMT nuts on both sides complete all as specified.\n | 140 | EACH | |
| 150 | 148 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc. (measured overall as fixed along the centre line over fitting and accessories) complete all as specified. | 500 | RM | |
| 151 | 149 | S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints / solvent cement joints fixed to walls with necessary clamps/ laid in floor complete all as specified. | 550 | RM | |
| 152 | 150 | S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints / solvent cement joints fixed to walls with necessary clamps/ laid in floor complete all as specified. | 150 | RM | |
| 153 | 151 | S&F 110mm bore PVC (SWR) bend any radius with access door all as specified & as directed. | 150 | EACH | |
| 154 | 152 | S&F 75mm bore PVC (SWR) bend any radius with access door all as specified & as directed. | 30 | EACH | |
| 155 | 153 | S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal provided with access door complete all as specified and directed. | 40 | EACH | |
| 156 | 154 | S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal provided with access door complete all as specified and directed. | 20 | EACH | |
| 157 | 155 | S&F 110 mm bore PVC (SWR) vent cowl complete all as specified. | 30 | EACH | |
| 158 | 156 | Taking down and refixing cast iron pipe 75mm bore fixed to walls with necessary fittings / connection & MS clamps as reqd in new or old position complete all as specified and directed\n | 20 | RM | |
| 159 | 157 | Taking down and refixing cast iron pipe 100mm bore fixed to walls with necessary fittings / connection & MS clamps as reqd in new or old position complete all as specified and directed\n | 33 | RM | |
| 160 | 158 | M&L PCC 1:3:6 type C-2 using 40 mm graded stone aggregate in concrete bed to RCC NP2 drain pipes including forming cradles in after they are laid and tested complete for 150mm bore pipe all as specified and as directed. | 65 | RM | |
| 161 | 159 | M&L for 150mm bore reinforced concrete pipe, class NP2, laid and jointed (in CM 1:1) complete with collars all as specified & as directed. | 70 | RM | |
| 162 | 160 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or ¾ section) in cement concrete (1:2:4) type B-1 using graded stone aggregate, smooth finished and reforming benching as required for 150mm bore pipe etc complete all as specified and directed by Engr-in-Charge. | 20 | EACH | |
| 163 | 161 | Taking down carefully copper/aluminum point wiring (light/fan/socket or power) complete including taking out existing unserviceable terminal boxes & conduit with switches/sockets/fan regulators and fittings such as ceiling rose, pendants, tube light fittings, lamp holders, brackets light fittings, rectangular blocks etc. and making good disturbed surface of walls, floors etc. to match with the existing surface etc complete all as specified and directed. | 2286 | EACH\nPOINT | |
| 164 | 162 | M&L for point wiring for one light point controlled by one, one way switch with 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including concealed PVC rigid non metallic conduit 20mm dia medium grade (ISI marked) with all fittings such as tees, bends etc complete, all as specified & directed. \n(Note :- Switches, sockets, sunken type modular metal box, modular plates etc shall be measured and paid for separately under appropriate items of BoQ' ).' | 1490 | EACH\nPOINT | |
| 165 | 163 | All as per item No. 162.00 (here-in-before) but for one 5 Amp socket outlet on independent board controlled by one Number one way switch on independent board. | 112 | EACH\nPOINT | |
| 166 | 164 | All as per item No. 162.00 (here-in-before) but for one 5 Amp socket outlet on the same board controlled by one Number one way switch on same board. | 432 | EACH\nPOINT | |
| 167 | 165 | All as per srl item No. 162.00 (here-in-before) but for 15 Amp socket out let by using 2.50 Sqmm PVC insulated unsheathed copper conductor cable FRLS multi strand on independent board including provn of 2.50 Sqmm unsheathed, multi stranded copper conductor cable FRLS continues as earth wire connected to earth dolly etc complete all as specified and directed. | 252 | EACH\nPOINT | |
| 168 | 166 | S&F modular socket, 6A, 2/3 combined 2 module all as specified & diretced. | 544 | EACH | |
| 169 | 167 | S&F modular socket, 6A/16A, 2/3 combined 2 module all as specified & diretced. | 252 | EACH | |
| 170 | 168 | S&F modular switch 1 way 6A module all as specified & diretced. | 2022 | EACH | |
| 171 | 169 | S&F modular switch 1 way 16A module all as specified & diretced. | 252 | EACH | |
| 172 | 170 | S&F modular bell push 6A module all as specified & diretced. | 12 | EACH | |
| 173 | 171 | S&F ding doll type bell , AC 230 Volts all as specified & diretced. | 12 | EACH | |
| 174 | 172 | S&F Sub main wiring with two single core cable PVC insulated unsheathed of copper multi stranded conductor FRLS cable of size 6 sqmm, 1100 votls grade drawing through and including concealed conduit 25 mm dia medium duty including acessories such as Tee, bend, Elbow etc, ISI marked with and including PVC insulated 6 sqmm unsheathed multistranded FRLS copper conductor cable for earth continuity and connected to common earth dolly including cutting chasing of wall, if required and making good disturbed surface in CM (1:3) and finishig the surface to match with existing surface, etc complete all as specified and directed by Engineer-in-charge including taking down old unserviceable submain wiring. \nNote:- Two lengths of 6 Sqmm cable, one length of 6 Sqmm cable and one length of PVC conduit will be measured as one length. | 1400 | RM | |
| 175 | 173 | S&F lamp holder, insluated body, with back plate suitable for batten fittings & complete all as specified & directed. | 552 | EACH | |
| 176 | 174 | S&F ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed. | 882 | EACH | |
| 177 | 175 | S&F modular fan regulator 120W - 2 module stepped type all as specified & diretced. | 330 | EACH | |
| 178 | 176 | S&F white cover plate with frame 8 module all as specified & diretced. | 270 | EACH | |
| 179 | 177 | S&F white cover plate with frame 2 module all as specified & diretced. | 17 | EACH | |
| 180 | 178 | S&F white cover plate with frame 3 module all as specified & diretced. | 112 | EACH | |
| 181 | 179 | S&F white cover plate with frame 4 module all as specified & diretced. | 256 | EACH | |
| 182 | 180 | S&F white cover plate with frame 6 module all as specified & diretced. | 126 | EACH | |
| 183 | 181 | S&F metal flush box 1/2 module all as specified & diretced.\n | 17 | EACH | |
| 184 | 182 | S&F metal flush box 3 module all as specified & diretced. | 112 | EACH | |
| 185 | 183 | S&F metal flush box 4 module all as specified & diretced. | 256 | EACH | |
| 186 | 184 | S&F metal flush box 6 module all as specified & diretced. | 126 | EACH | |
| 187 | 185 | S&F metal flush box 8 module all as specified & diretced.\nNote for Srl Item No 181 to 185 :- Quoted rates shall deemed to included necessary cutting chases and making good in CM 1:3 after fixing the box and finishing the surface with same finish as per existing surface. | 270 | EACH | |
| 188 | 186 | Taking down and refixing only ceiling fan any make and size including provision of down rod of 1.3 M lenght and servicing,including scrapping of surfaces, filling cavities with filler and one coat of synthetic enamel painting to ceiling fan complete all as specified and directed. | 110 | EACH | |
| 189 | 187 | S&F LED T-bulb of capacity 30 W, ISI marked, all as specified and directed. | 232 | EACH | |
| 190 | 188 | S&F LED light fitting 1x18W, batten for Retro LED energy saving tube light, ultra bright LED polycarbonate Tubelight with very high efficacy ready to use pack including LED tube all as specified and directed.\nMake : Havells Regal batten Cat Part No REGALBATTENT5UPTO1X18WDSBSWH & LED tube rod Cat Part No PHOTONULTRA1213T8SSTL18WLED865SPC or Syska Cat Part No SSK-TST-18W or Cat No LT 8-20-865-2 of Crompton or Cat part No HLT84DPC18CW of Halonix or equivalent of makes as mentioned in Appx 'C' list of makes. | 552 | EACH | |
| 191 | 189 | S&F in replacement street light LED light fitting 100/110 Watt, New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source with toughened glass top cover. TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 with 10KV Built-in Surge Protection Device, connected with and including 0.5 sqmm flexible copper multistranded conductor cable including security light bracket made to shape out of GI pipe 40mm dia light grade 1.5m length and fixed with MS clamps of size 40x5mm - 2 Nos, nuts, bolts and washers fixed on wall all as specified and directed.\nMake : Cat Part No ENDURAPEARLMAGNUMSL100WLED757PASYTOTGAST of Havells, Cat No SLG-N-110W of Syska, Cat No LTESS110WLED/LS of C&S, Cat No LSTP-100-CDL-M of Crompton or equivalent of make as mentioned in Appx 'C' list of makes here-in-after. | 14 | EACH | |
| 192 | 190 | S & F sheet metal enclosure, double door type, having door earthing, suitable for fixing MCCB,&MCBs, with three phase four wire copper strips bus bar of appropriate capacity complete all as specified and directed\nNote :- (i) The DB shall be VTPN of Indo Asian Cat Part NoNVMCCB04 or equivalent of makes mentioned in list of makes here-in-after. \n(ii) The DB shall be fixed flush with the wall including making nich and making good the disturbed surfaces all as per existing all as directed. \n(iii) MCCB/MCB shall be connected with appropriate size pin/bottle type thimble duly crimped properly. \n(iv) The vacant hole of DB shll be fitted with blank plates. | 8 | EACH | |
| 193 | 191 | S & F sheet metal enclosure, double door type, having door earthing,three phase 415 Volts, 4 ways suitable for fixing MCBs, SPN with 200 Amps rated bus bar, 8 way, 240 Volts.\nMake :- Indo Asian Cat Part No 810347 or equivalent of makes mentioned in list of makes here-in-after . | 48 | EACH | |
| 194 | 192 | S & F MCB SP, 6 to 32 Amps 240 Volts , 'C' curve, 10 KA, complete. \nNote :-Make of MCB shall be same of that DB. | 246 | EACH | |
| 195 | 193 | S & F MCB SPN, 40 Amps 240 Volts , 'C' curve, 10 KA, complete. \nNote :-Make of MCB shall be same of that DB. | 48 | EACH | |
| 196 | 194 | S & F MCCB 100 Amps, 4 Pole , breaking capacity 16 KA , complete. \nNote :-Make of MCB shall be same of that DB. | 8 | EACH | |
| 197 | 195 | S&F, single pole and neutral enclosure with two pin and earth plug and socket complete with one MCB 20Amps, 240 Volts all as specified and directed. | 24 | EACH | |
| 198 | 196 | Supply and fixing one star rated energy saving ceiling fan 1200mm sweep as per alest IS-374-2019 having service value > 4 to < 4.5 m3/min/w and 50 watt with double ball bearing and three blades with all accessories, down rod, two nos canopy, white in colour including 2 core 0.5 sqmm copper flexible cable for connection from ceiling rose to fan complete all as specified and directed.\n | 220 | EACH | |
| 199 | 197 | Supply & fixing and testing metal body exhaust fan of 450mm sweep heavy duty, double ball bearing, 900 RPM, suitable for SP 230 / 250 volt, 50 Hz AC supply complete with louver shutter including fixing / grouting of frame in wall & cutting opening complete with covers & connecting with & including 3 Nos 1.5 sqmm single core, PVC insulated but unsheathed FRLS 1100 volts grade cable with multi-stranded copper conductor from ceiling rose to fan complete.\nMake : Model No Turbojet SP of Havells or Cat Part No Supreme DLX HD of Bajaj or Cat No Transair of Crompton equivalent of make as mentioned in Appx 'C' list of makes here-in-after. | 30 | EACH | |
| 200 | 198 | Supply , laying , jointing, testing and commissioning of cable of size 25 sqmm 4 core LT underground cable , 1100 volts grade, XLPE insulated and PVC sheathed, armoured heavy duty with multistrand aluminium conductors as per IS 7098 (Part-I), laid in trenches /fixed on wall /floor /road /culverts /pole or encased in GI pipe including taking out existing u/s cable complete all as specified.\nNote : Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately. | 400 | RM | |
| 201 | 199 | M&L for Sand cushioning 230mm thickness with dry sand (one layer of 80mm thickness before laying of cable and other layer of 150mm thickness afterlaying of cable) and punned down to 180mm after laying of cable in trenches for protection of cable complete all as directed.\nNote :- For the purpose of payment only punned thickness shall be measured. | 26 | CUM | |
| 202 | 200 | M&L for brick covering to underground electric cable using sub class ‘B’ bricks, laid dry, flat, perpendicular to the direction of cable etc complete all as specified and directed. . | 2.5 | PER 1000 NOS | |
| 203 | 201 | S&F in replacement Galvanized iron tubing, 50mm bore light grade, ISI marked, including all fittings and laid in trenches/under road/drains, fixed to poles/walls with required size of flat iron (40mmx6mm) clamps, bolts, nuts and washers for protection of LT electric cable complete. \nNote :- Excavation & earthwork shall be measured & paid for separately. | 51 | RM | |
| 204 | 202 | Supply, installation & testing Geyser (water storage type) of capacity 25 litre vertical mounting type, 5 star rating, suitable for 220-240V, SP, 50 Hz AC supply fixed with & including ‘Anchor’ type /fastener type bolts & nuts (Set of 4 bolts of 10mm dia 150mm long with nuts & washers) into the wall grouted properly to hold the geyser and making good the disturbed surface as original all as per manufacturer’s instructions & as directed.\nMake : Cat Part \"EPM-WHT-V025\" of Jaquar or equivalent of makes as mentioned in Appx 'C' list of makes. | 12 | EACH | |
| 205 | 203 | S&F hot water PVC connection heavy duty, 450 mm long suitable for 15 mm bore GI pipe including brass nuts on both sides complete all as specified.\n | 24 | EACH | |
| 206 | 204 | M & L for earthing complete with galvanized iron earth plate electrode of size 60cmx60cmx6mm buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level, connected to the galvanized earth lead wire 4mm dia by means of GI bolts/nuts/ washers, protected by 15mm bore GI light grade pipe from earth plate and upto 3m along pole fixed with 2 clamps made from mild steel flat iron 25x3mm bolts, nuts and washers etc. Earth plate shall be surrounded by packed layer of coal dust 300mm and common salt 15cm thick all around bottom and top, 20mm GI medium grade pipe for watering and including funnel , wire mesh , RCC 1:2:4 type B-1 using 20 mm graded stone aggregate cover of size 30 cm X 30 cm X 8 cm thick reinforced with expanded metal weighing not less than 4Kg/Sqm, PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in earthing pit including necessary excavation and earth work, all as specified and shown in electrical plate No-3 of SSR part-I and connected to earthing point and testing on completion complete all as specified & as directed including dismantling & taking out old existing unserviceable earthing.. \nNote :- PCC chamber shall be constructed at least 1.5m away from the earth electrode and pipe for watering shall be provided in slanting manners. | 16 | EACH\nSET |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
