Military Engineer Services-MES has published Spl Repair To Bldg No T-10 And Provn Of Septic Tanks And Steel Sliding Gate At Gund Sonamarg And Manasbal Under Ge 970 Ews. Submission Date for this Tender is 19-05-2021. Building Repair Tenders in MANASBAL Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 04-May-2021 | Revised BOQ | BOQ | 12-05-2021 |
| 2 | 12-May-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 19-05-2021 |
| Name of Work: SPL REPAIR TO BLDG NO T-10 AND PROVN OF SEPTIC TANKS AND STEEL SLIDING GATE AT GUND SONAMARG AND MANASBAL UNDER GE 970 EWS | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Demolition of cement concrete in ground floor and paving n. exc. 15cm thickness (below or above ground level) complete all as specified and directed. | 5 | Cum | |
| 2 | 2 | Material & labour for hard core of broken stone or boulder of gauge not exc. 63mm deposited, spread and levelled in layers n.exc. 15cm thick, watered and well rammed to a true surface complete all as specified and directed. | 2.8 | Cum | |
| 3 | 3 | Material & labour for 75mm thick PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in sub base in floors etc complete all as specified and directed. | 128 | Sqm | |
| 4 | 4 | Material & labour for 25mm thick PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate), as in leveling concrete in floor finished even & rough to receive top floor layer/finish complete all as specified & directed. | 90 | Sqm | |
| 5 | 5 | Material & labour for 15mm thick cement screed on brick or concrete surfaces in cement mortar (1:6) without using extra cement complete all as specified and directed. | 90 | Sqm | |
| 6 | 6 | Material & labour for coloured ceramic joint less non skid tiles 7 to 8mm thick, as approved, polished area of each tiles exc 0.18 Sqm but n.exc. 0.38 Sqm (square/ rectangular) as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed. | 90 | Sqm | |
| 7 | 7 | Taking down chowkhats or frame with shutter (with or without taking off shutter from the frame) area exc 1.5 Sqm but n. exc 4 sqm each for doors and windows complete all as specified and directed. | 2 | Each | |
| 8 | 8 | Taking down chowkhats or frame with shutter (with or without taking off shutter from the frame) area n exc. 1.5 Sqm each for doors and windows complete all as specified and directed. | 5 | Each | |
| 9 | 9 | Supply & fix in repair 0.63 mm thick galvanised corrugated mild steel sheeting with two corrugations side lap bent to curve/shape, fixed with coach screws and washers or with L/J type hooks in roofs, wall or gate/door covering etc. with grade of zinc coating 275 complete all as specified. | 46 | Sqm | |
| 10 | 10 | Supply and fix in repair mild steel plain black sheet 0.80mm thick as roof covering, hips, valley etc, cut to size, holes punched including fixing to MS clamps with necessary bolts and nuts complete all as specified and directed. | 10 | Sqm | |
| 11 | 11 | S&F 2nd class soft wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed by engineer in charge. | 0.5 | Cum | |
| 12 | 12 | Supply and fix 35mm thick factory made plain framed, panelled shutters (two panels), with lock rail and panels of 9mm thick BWP commercial ply or of venered particle board 12mm thick with commercial veneering on both faces with rails and style of 2nd class Soft wood. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed. | 4.5 | Sqm | |
| 13 | 13 | Supply and fix 2nd class Soft wood factory made glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in clause 8.24 (a) of SSR Part-I; supplied and fitted to chowkhats complete all as specified and directed. | 4.5 | Sqm | |
| 14 | 14 | Supply and fix 2nd class Soft wood factory made glazed and skeleton shutters 30mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in clause 8.24 (a) of SSR Part-I; supplied and fitted to chowkhats complete all as specified and directed. | 10 | Sqm | |
| 15 | 15 | Supply and fix 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed. | 5 | Sqm | |
| 16 | 16 | Supply and fix 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane incl hacking out old glass from windows/doors (wooden/steel) complete all as specified and directed. | 7 | Sqm | |
| 17 | 17 | Supply and fix galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed. | 14 | Sqm | |
| 18 | 18 | M&L 2nd class softwood Plain fillets of area exc 6 sqcm but not exc. 13 sqcm square, rectangular or triangular in section, clean sawn, se-cured with nails or brads incl demolition old complete all as specified and directed | 500 | RM | |
| 19 | 19 | M&L for 4mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work as in ceiling incl demolition old complete all as specified and directed | 90 | Sqm | |
| 20 | 20 | M&L for 4mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work as in wall incl demolition old complete all as specified and directed | 135 | Sqm | |
| 21 | 21 | M&L 2nd class softwood (kail) 20mm thick boarding fixed with nails in any situation (except flooring and skirting ) Planed one side with butt joints as in facia boards incl dismantling old complete all as specified and directed. | 25 | Sqm | |
| 22 | 22 | Material & labour for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. | 75 | Sqm | |
| 23 | 23 | Material & labour for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed. | 150 | Sqm | |
| 24 | 24 | Material & labour for preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. | 126 | Sqm | |
| 25 | 25 | Material & labour for preparation of old steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. | 125 | Sqm | |
| 26 | 26 | M&L 2nd class softwood timber frame and fixed clean sawn as in scantling incl dismantling timber scantling 40 sq cm and over complete all as specified and directed | 0.56 | Cum | |
| 27 | 27 | Supply & fix 300 mm long aluminum anodized sliding door bolt, bolt type with hasp and staple bolt and fixing clips of sheet incl fixing bolts complete all as specified and directed. | 2 | Each | |
| 28 | 28 | Supply & fix aluminium alloy handles, cast type, anodised, 150mm size, all as specified and directed. | 8 | Each | |
| 29 | 29 | Supply & fix aluminium alloy handles, cast type, anodised, 100mm size, all as specified and directed. | 20 | Each | |
| 30 | 30 | Supply & fix 125 mm size mild steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed. | 12 | Each | |
| 31 | 31 | Supply & fix 100 mm size mild steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed. | 40 | Each | |
| 32 | 32 | Supply & fix 200 mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. | 8 | Each | |
| 33 | 33 | Supply & fix 125 mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. | 40 | Each | |
| 34 | 34 | Supply & fix mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. | 2 | Each | |
| 35 | 35 | Excavation over areas, n exc 1.50m deep and getting out in soft/loose soil complete all as specified and directed. | 54 | Cum | |
| 36 | 36 | Excavation over areas, exc 1.50m deep but not exc 3 and getting out in soft/loose soil complete all as specified and directed. | 16 | Cum | |
| 37 | 37 | Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc and getting out in soft/loose soil complete all as specified and directed. | 41.48 | Cum | |
| 38 | 38 | Excavation in trenches, not exceeding 1.5m wide and exceeding 1.5m in depth for foundation, etc and getting out in soft/loose soil complete all as specified and directed. | 0.82 | Cum | |
| 39 | 39 | Material & labour for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling, mass concrete etc complete all as specified and directed. | 1.45 | Cum | |
| 40 | 40 | Material & labour for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in foundation filling, mass concrete etc complete all as specified and directed. | 6.59 | Cum | |
| 41 | 41 | Material & labour for brick work with sub class 'B' bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar (1:4) complete all as specified and directed. | 42 | Cum | |
| 42 | 42 | Material & labour for brick work with sub class 'B' bricks, old size, straight or curved laid dry complete all as specified and directed. | 2 | Cum | |
| 43 | 43 | Material & labour for bricks work as in half brick thick wall using sub class `B’ bricks straight or curved on plan to any radius built in cement mortar 1:4 exceeding 6m radius complete all as specified and directed. | 4.8 | Sqm | |
| 44 | 44 | Material & labour for 15mm thick cement screed on brick or concrete surfaces in cement mortar (1:4) mixed with integral water proofing compound in the proportion recommended by manufacturer, in sunken floors etc. ,surfaces finished even and smooth without using extra cement complete all as specified and directed. (WPC shall be measured and paid seperately). | 86 | Sqm | |
| 45 | 45 | Material & labour for 12mm thick cement plaster in cement mortar (1:4) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. | 16 | Sqm | |
| 46 | 46 | Supply only integral water proofing compound (ISI marked) complete all as specified and directed. | 36 | Kg | |
| 47 | 47 | Material & labour for use and waste of formwork to soffits of suspended slabs /shelves/ chajjas etc. & rough finished surfaces of concrete complete all as specified and directed. | 20 | Sqm | |
| 48 | 48 | Material & labour for mild steel high yield strength TMT bars 6 to 8 mm dia cut to length bent to shape required, including cranking, hooking ends, bending and binding with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed. | 150 | Kg | |
| 49 | 49 | Material & labour for reinforced cement concrete (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in chajjas/shelves/ slabs complete all as specified and directed.\nNote : Reinforced if any used in subject item shall be measured and paid separately. | 4 | Cum | |
| 50 | 50 | Supply & fix in repairs 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including necessary cutting chasing etc. complete all as specified and directed. | 6.6 | RM | |
| 51 | 51 | Material & labour for cast iron soil, waste and vent pipe of bore 75mm, sand cast type in any length with or without ears with cement joints fixed to wall/laid in trenches complete all as specified and directed. | 5.2 | RM | |
| 52 | 52 | Material & labour for precast cement concrete 1:2:4 type B1 (20 mm graded aggregate) set in cement mortar 1:4 as in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating, cover slab for manholes, coping, benching etc complete with joints to match complete all as specified and directed. | 0.8 | Cum | |
| 53 | 53 | Material & labour for mild steel high yield strength TMT bars 10 mm dia and over cut to length bent to shape required, including cranking, hooking ends, bending and binding with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed. | 126 | Kg | |
| 54 | 54 | Material & labour for PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands plinth cources, roof kerbs or mud stops, benching, coping, bed plates, parapets, water throughs and the like etc including weathering, slightly rounded or chamfered angles throating etc complete including necessary form work complete all as specified and directed. | 0.1 | Cum | |
| 55 | 55 | S&F for reinforced cement concrete pipes 150mm bore, class NP2 laid in trenches and jointed with collars of pipe in cement mortar 1:3 with and including demolition and breaking up drain pipes of any type set in cement mortar complete all as specified and directed | 15 | Rm | |
| 56 | 56 | M&L for concrete bed to drain pipes 150mm bore laid bed including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 complete all as specified and directed | 15 | Rm | |
| 57 | 57 | Returning filling in layers including leveling watering and well ramming in layers not exc. 25cm thick complete all as specified and directed. | 40.18 | Cum | |
| 58 | 58 | Removing surplus spoil to a distance not exc. 50m and depositing where directed at a level n. exc. 1.5m above the starting point complete all as specified and directed. | 71.81 | Cum | |
| 59 | 59 | Material & labour for loose filling of broken bricks of gauge 80 to 150mm deposited, spread and levelled in soakage pits/soakage well complete all as specified and directed. | 7 | Cum | |
| 60 | 60 | Supply and fix mild steel framed work as in guard bars/grills, grating etc with end of bars shouldered and/ or riveted or forged in to spikes and similar works including one shop coat of zinc chromate primer complete conforming to Fe-290, Gde E-165 all as specified and directed. | 172 | Kg | |
| 61 | 61 | Supply and fix mild steel plain black sheet 1.60mm thick as in chullah hood, covering to door shutters, ducks etc, cut to size, holes punched including fixing to MS clamps with necessary bolts and nuts complete all as specified and directed. | 10 | Sqm | |
| 62 | 62 | Supply and fix MS work as in posts,sturts & vertical columns of MS tubular pipes or any other section incl gussets plates,base plates etc incl a shop coat of red oxide complete all as specified and directed. | 260 | Kg | |
| 63 | 63 | Supply and fix mild steel framed work as in doors chowkats or frames, cooler stand or other section with gusset plates, rails, braces, etc. using steel conforming to Fe-290 Gde-E-165 complete including drilled for fixing of steel sheeting or other covering; doors, door frames, chowkhats etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including necessary cutting drilling and welding etc complete all as specified and directed. | 1415 | Kg | |
| 64 | 64 | Supply and fix mild steel rolled section as in main and cross beams, hip and jack rafter, purlins, connected to common rafters, fixed with cleats and plates etc conforming to Fe-290. Gde-E-165 including one shop coat of zinc chromate primer paint a (incl preparation of surface) before fabrication all as specified and directed. | 410 | Kg | |
| 65 | 65 | Supply and fix mild steel work as in bands, straps, supports or stays for\nrain water pipes, ventilating pipes including bolts if required, clamps,\nhold fasts, wall ties, cleats and similar small articles conforming\nto Fe-290 Gde E-165 complete all as specified and directed. | 22 | Kg | |
| 66 | 66 | Supply and fix road safety / retro reflective / overhead gantry sign board etc made out of 4mm thick transparent delite acrylic sheet of required shape & size with necessary welding drillind and bolting etc and writing the letters numbers symbols etc with selected quality reflective sheet through computerised in required shape size and colors combination and fixed and paste over acrylic sheet of frame with necessary nut/bolts etc complete all as specified and directed by Engr-in-Charge. | 10 | Sqm | |
| 67 | 67 | Taking down cement plaster/ terrazzo cast in situ of any description thickness including racking out joints hacking for key, scrubbing down with water etc. and removing rubbish complete all as specified and directed. | 24 | Sqm | |
| 68 | 68 | Material & labour for granite (of any type) work, 18 to 20mm thick machine cut (table rubbed and polished) in steps jambs, pillars, window cills, cooking platforms, shelves in cupboard, handwash places and like including necessary cutting and grooving to walls and making good including 10mm thick in cement mortar (1:3) screed bed or bedding layer and pointing with cement mortar (1:2) with admixture of pigment to match with shade of granite complete all as specified and directed. | 10 | Sqm | |
| 69 | 69 | Taking down carefully existing point wiring aluminum/ copper conductor for light or fan or socket or power etc on wooden batten or in conduit including fittings and accessories like switches, sockets, wooden board and making good disturbed portion to match with existing complete all as specified and directed. | 50 | Per Point | |
| 70 | 70 | Taking down old and unserviceable, distribution board/main switch of any type including fuses, MCBs etc after removing all connections and making good the disturbed surface all as directed by Engr-in-charge | 2 | Each | |
| 71 | 71 | Taking down old and unserviceable submain wiring/ service cable any size of any core including earth wire complete including batten/ conduit and make good the disturbed surface to match the existing finish, all as directed by Engr-in-charge. | 50 | RM | |
| 72 | 72 | Material & labour for point wiring complete with single core 1.5 Sqmm (nominal area) PVC insulated multistranded, copper conductor cable (FRLS) drawn through and including PVC casing caping/conduit of suitable size bore (ISI marked) and accessories fixed on surface, terminated in and including pressed steel terminal boxes with plastic laminated backlite sheet top cover 3 mm thick (hylum) fixed with nickel polished screws with washers, earth continuity PVC cable(FRLS), copper conductor 1.5 Sqmm (nominal area) stranded with green insulation earth wire connected with earth dolly One light point / fan point / bell push point controlled by one way switch 5 Amprs and/or through regulator complete all as specified and directed. complete all as specified. | 30 | Per\n Point | |
| 73 | 73 | All as per description of srl item No 72 here-in-before but socket out let 3 pin, 5 Amp on same board with other switch. | 10 | Per\n Point | |
| 74 | 74 | All as per description of srl item No 72 here-in-before but socket out let 3 pin, 5 Amp on independent board with other switch. | 5 | Per\n Point | |
| 75 | 75 | All as per description of srl item No 74 here in before but using 2.5 sqmm (nominal area) PVC stranded copper conductor cable with 1.5 Sqmm PVC insulated copper cable for continuous earth continuity conductor for 3 pin socket out let 15 Amps on independent board. | 5 | Per\n Point | |
| 76 | 76 | Supply and fix switch piano flush type, 5 Amps, 240V AC, single pole, one way complete all as specified and directed.\n | 30 | Each | |
| 77 | 77 | Supply and fix Socket outlet 2 in 1, 5 pin, 5 Amp, 230 V AC complete all as specified and directed. | 10 | Each | |
| 78 | 78 | Supply and fix Switch socket combination 5 in 1, 3 pin 5/15 Amps 240 V AC flush type universal, complete all as specified and directed. \n | 5 | Each | |
| 79 | 79 | Supply and fix Switch socket combination 5 in 1, 3 pin 5/15 Amps 240 V AC flush type universal, complete all as specified and directed. \n | 5 | Each | |
| 80 | 80 | Supply and fix Ceiling rose 2/3 terminals all as specified and directed.\n | 30 | Each | |
| 81 | 81 | Supply and Fix in repair surface mounted Energy efficient LED Luminaire 20 watts capacity 4 feet long with all accessories & acrylic cover and 2 core copper connecting cable from ceiling rose to light fitting (Approx 0.75 Mtr) complete all as directed. Make :- bajaj cat part no BCLSB 18 WH or equivalent in Phillips/CG\n\n | 26 | Each | |
| 82 | 82 | Supply and fix sheet metal enclosures for DB's with 200 Amp rated bus bar double door class IP-43 epoxy coated inside and outside 12 way SPN 240 volts complete all as specified and directed. | 1 | Each | |
| 83 | 83 | Supply and fix sheet metal enclosures for DB's with 200 Amp rated bus bar double door class IP-43 epoxy coated inside and outside 8 way SPN 240 volts complete all as specified and directed. | 1 | Each | |
| 84 | 84 | Supply and fix MCB SPN 63 Amp, 240 volts,10 KA, C-curve complete all as specified and directed. | 1 | Each | |
| 85 | 85 | Supply and fix MCB SPN 40 Amp, 240 volts,10 KA, C-curve complete all as specified and directed. | 1 | Each | |
| 86 | 86 | Supply and fix MCB SP 6 to 32 Amp, 240 volts,10 KA, C-curve complete all as specified and directed. | 14 | Each | |
| 87 | 87 | Material and labour for sub main wiring with two runs of single core PVC insulated (FRLS-H) unsheathed copper conductor multistranded cable of size 6 sqmm 1100 volts grade drawn through in & including PVC conduit/casing caping of suitable size & 4 sqmm single core copper conductor multistranded PVC insulated (FRLS-H) unsheathed cableas earth wire continuity conductor complete all as specified and directed by Engineer in charge. Note : (i) Two run of cable 6 sqmm and one run of 4 sqmm earth wire and one run of PVC casing caping/PVC conduit shall be measured and paid as one unit only. (ii)Phase should be Red / Yellow / Blue, neutral should be black and earthing wire should be green in colour | 39 | RM | |
| 88 | 88 | Material and labour for PVC sheathed heavy duty electric LT cable XLPE/PVC insulated armoured and with aluminium conductor 1100 volt grade 16 sqmm 2 core in repairs fixed on walls/roof/ceilings drawn through in pipes for house service connections connecting from pole/panel to DB's etc complete including taking down old unserviceable complete all as specified | 50 | RM | |
| 89 | 89 | Material and labour for earthing complete with galvanised steel earth plate electrode 60cmx 60cmx 6.00 mm thick buried directly in ground (Earth pit not less than 2.25 metre below normal ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to and including GI Wire 4 mm dia by means of GI bolts, nuts, check nuts and washers, suitable size of all as shown in Electrical plate No. 3 of SSR Part-I, testing on completion including excavation/earth work in any type of soil/rock, PCC chamber (1:3:6) using 20mm graded stone aggregate and 50mm thick RCC (1:2:4) type B-1 cover slab reinforced with 8mm dia TMT steel bars @ 100mm c/c both ways with suitable handle for lifting arrangement & including formwork and MS frame using MS angle iron 25x25x3mm complete all as specified and directed. Note :- Earth pit shall be constructed 50cm from the side of excavation to avoid sinking of pit | 2 | Each | |
| 90 | 90 | S&F in repair of electronic dimmers, 450 watts 250V flush type on the existing phenolic terminated sheet etc complete all as specified and directed. | 4 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
