|
| 1 | ITEM No.1: Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete.Ground Floor |
| 2 | first floor |
| 3 | ITEM No.2: Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete. Ground floor |
| 4 | first floor |
| 5 | ITEM No.3: Removing Water Closet Pan including disconnecting the sanitary and water supply connections, removing and breaking flooring and bed con-crete around pan removing the same carefully and stacking the service-able materials as and where directed includingthrowing the unserviceable materials out side etc. complete.ground floor |
| 6 | first floor |
| 7 | ITEM No.4: Removing the existing cement plaster of any thickness without causing dust nuisance and stacking the debris upto a distance of 50 metres or spreading in the compound and cleaning the site etc. complete. Note : Following items to be executed after prior approval of Superintending Engineer. Ground floor |
| 8 | first floor |
| 9 | ITEM No.5: Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Ground floor |
| 10 | first floor |
| 11 | ITEM No.6: Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) gROUNDF LOOR |
| 12 | first floor |
| 13 | ITEM No.7: Providing and laying vitrified mirror / glossy finish tiles decorative typehaving size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearingetc. complete. a) Flooring GROUND FLOOR |
| 14 | first floor |
| 15 | ITEM No.8: Providing and laying cement concrete flooring 50 mm thick with M15 cement concrete laid to proper level and slope in alternate bays including compaction filling joints, marking lines to give the appearance of tiles of 30cm x 30cm or other size laid diagonally/square etc finishing smooth (with extra cement) in any colour as directed and curing etc. complete. With Crushed Sand. GROUND FLOOR |
| 16 | first floor |
| 17 | Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete.Spec.No. As directed by Engineer in charge SSR I.NO.32.34 P.No.264 GROUND FLOOR |
| 18 | first floor |
| 19 | Providing and fixing frame work of anodised aluminium sections for suspended false ceiling consisting of aluminium T 50 mm x 40 mm weighing 0.39 kg/m. at 60 cms c/c & fixed with ( 15 x 15 mm) flanges weighing 0.119 kg/m suspended on 6 mm dia. mild steel rod weighing 0.22 kg/m fixed on wall and beams including rounding of the edges with aluminium T of 50 mm x 40 mm weighing 0.39 kg/m etc. including all labour etc. complete. Spec.No.: As directed by Engineer in charge SSR I.NO.38.14 P.No.292 |
| 20 | Providing and fixing false ceiling of 12mm thickas per drawings including powder coated G.I. wall angle of 20mm x 20mm size, G.I. grid runners of size 20mm x 38mm at 600mm center to center both ways and suspended using G.I. 3mm wire including fixing using butterfly clips and fasteners including transporting, scaffolding all necessary labour and machinery, finishing etc. complete. Spec.No.: Bd.R.19 Page No.462 SSR I.NO.38.18 P.No.293 |
| 21 | Providing and fixing European type wall-hung white water closet of approved make with push valve concealed type with cover plate 32mm size of approved make including soil pipe, vent pipe up to outside face of wall ,100mm dia. G.I. plug bend inlet pipe all fittings, cuttingand making good walls, floors etc. complete. Spec.No.: As directed by Engineer in charge SSR I.NO.42.86 P.No.354 |
| 22 | first floor |
| 23 | Providing and fixing White glazed with bottle trap earthenware Wash Hand Basin of 63x45 cm size including cold water piller taps, brackets, rubber plugs and brass chain, stop tap, chromium plate bottle trap and necessary pipe connections including UPAC waste pipe and trap upto the outside face of the wall, making good the damaged surface, testing etc. complete. (BRAND - HINDWARE/ JOHNSON/PARRYWARE/ VIENA/ AMERICAN STANDARiv) Spec.No.: BDV-30 Page No.616 SSR I.NO.41.70 P.No.341 |
| 24 | first floor |
| 25 | Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Spec.No.: BD.V.5 Page No.551 and As directed by Engineer in charge SSR I.NO.42.55 P.No.350 |
| 26 | first floor |
| 27 | Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Spec.No.: BD.V.5 Page No.551 and As directed by Engineer in charge SSR I.NO.42.56 P.No.351 |
| 28 | first floor |
| 29 | Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete.Spec.No.: Bd.V.8 Page No.554 SSR I.NO.41.40 P.No.337 |
| 30 | first floor |
| 31 | Providing and fixing 20 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete.Spec.No.: Bd.V.8 Page No.554 SSR I.NO.41.41 P.No.337 |
| 32 | first floor |
| 33 | Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete. Spec.No.: As directed by Engineer in charge SSR I.NO.42.20 P.No.345 |
| 34 | first floor |
| 35 | Providing and fixing in position carpet more than 800 + gsm made wit 100 % stain proof fibres of approvedmake alng with 5 mm underlay as per architehural and acoustical design and instructions and complete in all aspects including all materials labourfinishing etc completq |
| 36 | Providing and applying Royale Luxury Emulsion of Asian / Berger / Nerolac / Dulex Paints or equivalent make on internal wall surface as detailed below Scrapping for surface with emery paper and wipe clean for area. Applying Asian / Berger / Nerolac / Dulex Paints or equivalent wall primer with brush by adding mineralturpentine oil by 8 to 10 % or water by 15 to 20% allowing to dryfor 6 to8 hoursAfter applying Asian / Berger / Nerolac / Dulex Paints or equivalent acrylic wall putty with appropriate prpportion of water of allow to dry for period of 4 to 6 hours of activity. Scrapping with emery paperand wipe clean Applyingpaints Royale Luxury emulsion 1st coat with brush water content water 40 to 45% or 65 to 70% by role Applying paints Royale luxury emulsion 2nd coat with brush with water content 40 to 45 %or 65 to 70 % by roller. (With prior approval of S.E.) Spec.No.As directed by Engineer in charge SSR No.36.21 P.No.286 |
| 37 | first floor |
| 38 | Providing and applying external raincoat painting with crack filling acrylic polymer based chemical compound coating to the external surface of walls to prevent water seepage in the masonry walls during monsoon added with required shade Steiner to give required shade to the surface in two coats. Including providing three coat of priming of polymer base primer including preparing surface scrapping the existing loose old paint, removing loose particles of sand on the surface opening and cleaning the cracks developed in the external plaster, removing loose particles by chiseling, filling cracks by chemicals compound of approved make with proper penetration etc. Coating of Raincoat with the help of brush and as per instructions and specification given by manufacturer and with instruction from Engineer in-charge. Work shall be executed by certified applicator only and covering gurantee of 3 years on court stamp paper of Rs. 500/- and necessary testing etc. complete. Spec.No.: As directed by Engineer in chargeSSR I.NO.35.29 P.No.283 |
| 39 | first floor |
| 40 | Providing and laying machine cut machine polished shahabad Stone slabs 20 to 25mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. Spec.No. Bd.M.22 Page No.390SSR I.NO.33.18 P.No.268 |
| 41 | Providing and fixing sofe set 3+1+1 BROWN AND CREAM LEATHER DIMENSION LENGTH 182:5 CMS BREADTH CMS 100 CMS HIGIHT CMS 100 CMS WEIGHT KGS 66 KG SEATING CAPACITY FIVE SEAT |
| 42 | ITEM No.25: Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension ?63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete.With powder coating without box |
| 43 | ITEM No.24: Tea Table 900mm X 750mm X 450mm for m.s. ante chamberProviding And Fixing Of Tea Table 900mm X 750mm X 450mm With 12mm Thick Colour Eitched Tempered Glass With Bevelled Drawing Made OutOf 18mm Thick Waterproofing Ply. The Outer Laces To Be Finished With High Quality 4 Mm Thik Veneer Or 1 Mm Thik Mica Etc. |
| 44 | Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension ?63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With powder coating without box Spec.No.: As directed by Engineer in charge SSR I.NO.39.40 P.No.315 |
| 45 | Add GST Charges 12% |
