| 1 | 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for \nfoundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, \nwells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides \nand ramming of bottoms lift upto 1.5 m, including getting out excavated earth and \ndisposal of surplus excavated earth as directed, within a lead of 50 metres:\n All kinds of soil :\n | | 217.94 | sqm |
|---|
| 2 | 2 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as\ndirected: : All kinds of Soil | | 391.7 | Cum |
|---|
| 3 | 3 | Providing and laying in position cement concrete of specified grade including curing but\nexcluding the cost of centring and shuttering. All work upto plinth level with:1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)including all carriages lead lift complete | | 161.13 | Cum |
|---|
| 4 | 4 | Providing and laying in position cement concrete of specified grade including curing but\nexcluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) | | 154.13 | Cum |
|---|
| 5 | 5 | Dumping of stone including supply of items | | 32.35 | Cum |
|---|
| 6 | 6 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers •. abutments, pillars, posts, struts, butteresses, string or laces, courses, parapets, coping, bed blocks, anchor blocks, plain window sills,sunken floors fillets etc. upto floor five level, excluding the cost of centring, shuttering and finishing: 1 3 6 (1 cement 3 coarse sand 6 gradea stone aggregate 20mm nommal SIZe!Crushed | | 4.13 | Cum |
|---|
| 7 | 7 | Dry random rubble masonry with hard stone in foundation and plinth: Using nallah stone with bond stone | | 6.26 | sqm |
|---|
| 8 | 8 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in\nfoundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand) | | 95.42 | Cum |
|---|
| 9 | 9 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in\nfoundation and plinth including curing in :Cement mortar 1:4 ( 1 cement : 4 coarse sand) | | 4.21 | Cum |
|---|
| 10 | 10 | Half brick masonry with common burnt clay (non-modular) bricks of class designation\n7.5 in foundations and plinth including curing in :Cement mortar 1:4 ( 1 cement : 4 coarse sand) | | 18.03 | sqm |
|---|
| 11 | 11 | Extra for brick work with common burnt clay bricks/cement concrete bricks in\nsuperstructure above plinth level upto floor five level | | 99.63 | Cum |
|---|
| 12 | 12 | CEMENT PLASTER (IN FINE SAND)\n12mm Cement plaster of mix:\n1 : 4 ( 1 cement : 4 fine sand) | | 47.54 | sqm |
|---|
| 13 | 13 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone\naggregate) finished with a floating coat of neat cement including cement\nslurry and curing complete, but excluding the cost of nosing of steps etc.\ncomplete.50 mm thick with 20mm nominal size stone aggregate. | | 9.14 | sqm |
|---|
| 14 | 14 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering,finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) | | 100.73 | Cum |
|---|
| 15 | 15 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in\nposition and binding all complete above plinth level Cold twisted bars | | 155.29 | Qtl |
|---|
| 16 | 16 | Providing and laying in position cement concrete of specified grade including curing but\nexcluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | | 17.34 | Cum |
|---|
| 17 | 17 | Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1\ncement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete | | 203.6 | sqm |
|---|
| 18 | 18 | Providing and fixing aluminum work for doors, windows, ventilators and\npartitions with extruded built up standard tubular sections/appropriate Z\nsections and other sections of approved make conforming to IS: 733 and\nIS: 1285, fixed with dash fastener of required dia. and size including\nnecessary filling up of gaps at junctions i.e, at top, bottom and sides with\nrequired EPDM rubber / neoprene gasket felt etc. Aluminum sections\nshall be smooth, rust free, straight, mitred and jointed mechanically\nwherever required including cleat angle, Aluminum snap beading for\nglazing / panelling, C.P. brass / stainless steel screws, all complete as per\narchitectural drawings and the directions of Engineer-in-Charge (glazing,\npanelling and dash fasteners to be paid for separately.)Polyester powder coated aluminum (minimum thickness of\npolyester powder coated 50 microns) | | 1200 | Kg |
|---|
| 19 | 19 | Providing and fixing 12mm thick prelaminated particle boardflat pressed three layer or graded wood particle\nboard (conforming to IS: 12823 Grade-l type-11) in panelling fixed in aluminium doors, windows shutters and partition frames with C. P. brass I stainless steel screws etc.complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side.Pre-laminated particle board with decorative lamination on one\nside and balancing lamination on other side. | | 10 | sqm |
|---|
| 20 | 20 | Providing and fixing glazing in aluminum door, window, ventilator\nshutters and partitions etc. with EPDM rubber / neoprene gasket etc.\ncomplete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.)\n With floating glass panes of 4.0 mm thickness (weight not less\nthan 10.00 kg / sqm) | | 75 | sqm |
|---|
| 21 | 21 | Providing and fixing double action hydraulic floor spring of approved\nbrand and manufacture IS : 6315 marked, having brand logo embossed\non the body/plate with double spring mechanism and door weight upto\n125 kg for doors including cost of cutting floors, embedding in floors as\nrequired and making good the same matching to the existing floorfinishing and cover plates with brass pivot and single piece M.S. sheet\nouter box with slide plate etc. complete as per the direction of Engineerin- plate etc. complete as per the direction of Engineer-in-charge.\n With Stainless Steel cover plate minimum 1.25 mm thickness. | | 25 | sqm |
|---|
| 22 | 22 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in\nfoundation and plinth including curing in :Cement mortar 1:4 ( 1 cement : 4 coarse sand) | | 0.48 | Cum |
|---|
| 23 | 23 | Providing and laying RBM filling free from organic material including watering,compacting in consolidation | | 106.71 | Cum |
|---|
| 24 | 24 | Centering and shuttering including strutting, propping etc. and removal of form for:Foundations, footings, bases of columns etc. for mass concrete. | | 299.34 | sqm |
|---|
| 25 | 25 | Centring and shuttermg including strutting, propping etc. and removal of form for· Retatning walls. return walls. walls (any thickness) including attached pilasters. buttresses. plinth and strmg courses fillets etc | | 16.2 | sqm |
|---|
| 26 | 26 | Centering and shuttering including strutting, propping etc. and removal of form for:Lintel, beams, plinth beams, girders, bressumers and cantilevers. | | 51.12 | sqm |
|---|
| 27 | 27 | Centring and shuttermg including strutting, propping etc.and removal of form for Suspended floors, roofs, landings, balconies and access platform. | | 65.08 | sqm |
|---|
| 28 | 28 | Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 \ncement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete | | 13.6 | sqm |
|---|
| 29 | 29 | Edges of slabs and breaks in floors and walls. Under 20cms wide | | 758.48 | Mtr |
|---|
| 30 | 30 | 12mm Cement plaster of mix: | | 31.72 | sqm |
|---|
| 31 | 31 | 6MM CEMENT PLASTER\n6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) | | 90.83 | sqm |
|---|
| 32 | 32 | 15mm Cement plaster on the rough side of single or half brick wall of\nmix 1 : 6 ( 1 cement : 6 fine sand) | | 99.63 | sqm |
|---|
| 33 | 33 | Providing and applying white cement based putty of specified thickness,\nof approved brand and manufacturer, over the plastered wall surface to\nprepare the surface even and smooth complete. | | 190.46 | sqm |
|---|
| 34 | 34 | Distempering with oil bound washable distemper of approved brand and\nmanufacture to give an even shade on New work (two or more coats) over\nand including priming coat with water thinnable cement primer | | 190.46 | sqm |
|---|
| 35 | 35 | Making soak pit 2.5 m diameter 3.0 meter deep with 45x45 cm dry brick\nhoney comb shaft with common burnt clay (non modular) bricks of class\ndesignation 7.5 bricks and S.W. drain pipe 100 mm diameter, 1.8 m long\ncomplete as per standard design | | 1 | Each |
|---|
| 36 | 36 | Providing and laying vitrified floor tiles in different sizes (thickness to\nbe specified by the manufacturer) with water absorption less than 0.08%\nand conforming to IS:15622 of approved make, in all colours and shades,\nlaid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand)\nincluding grouting the joints with white cement and matching pigments\netc. completeSize of tile 500x500 mm | | 54.07 | sqm |
|---|
| 37 | 37 | Chequerred precast cement concrete tiles 22mm thick in footpath and\ncourtyard, jointed with neat cement slurry mixed with pigment to match\nthe shade of the tiles, including rubbing, cleaning and curing complete,\non 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) .Dark shade using ordinary cement | | 156.13 | sqm |
|---|
| 38 | 38 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness\nto be specified by the manufacturers) of 1st quality conforming to IS:\n15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4\n( 1 cement : 4 coarse sand) including pointing the joints with white\ncement and matching pigment etc., complete.\n In colour such as White, Ivory, Grey, Fume Red Brown | | 1.86 | sqm |
|---|
| 39 | 39 | Providing and fixing 1st quality ceramic glazed floor tiles conforming\ntoIS : 15622 (thickness to be specified by the manufacturer ) of approved\nmake in all colours, shades except burgundy, bottle green, black of any\nsize as approved by Engineer-in-Charge in skirting, risers of steps and\ndados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse\nsand) and jointing with grey cement slurry @ 3.3kg per sqm including\npointing in white cement mixed with pigment of matching shade\ncomplete. | | 8.06 | sqm |
|---|
| 40 | 40 | Kota stone slab 20 mm thick in risers of steps, skirting, dado and pillars\nlaid on 12 mm ( average) thick cement mortar 1:3 (1 cement:3 coarse\nsand) and jointed with grey cement slurry mixed with pigment to match\nthe shade of the slabs, including rubbing, polishing and curing complete. | | 1297.49 | sqm |
|---|
| 41 | 41 | Kota stone slab flooring 25 mm thick over 20mm (average) thick base\nlaid over and jointed with grey cement slurry mixed with pigment to\nmatch the shade of the slab, including rubbing, polishing and curing\ncomplete with base of cement mortar 1:4 (1 cement : 4 coarse sand) : | | 408.74 | sqm |
|---|
| 42 | 42 | Providing and fixing white vitreous china pedestal type water closet ( European type) with seat and lid , 10 litre low level white vitreous china flushing cistern and CP flush with fittings, C. I./M.S. brackets 40mm bend diameter flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors ,...- wherever required:W.C. pan with lSI marked white solid plastic seat and lid. with white vitreous china flushing cistern & C. P. flush bend. | | 2 | Each |
|---|
| 43 | 43 | Providing and fixing on wall face un-plasticized Rigid PVC rain water\npipes conforming to IS: 13592 Type A including jointing with seal ring\nconforming to IS: 5382 leaving 10 mm gap for thermal expansion.\n(i) Single socketed pipes\n 75 mm diametre | | 25 | Mtr |
|---|
| 44 | 44 | Providing and fixing on wall face un-plasticized Rigid PVC rain water\npipes conforming to IS: 13592 Type A including jointing with seal ring\nconforming to IS: 5382 leaving 10 mm gap for thermal expansion.\n Single socketed pipes 110 mm diameter | | 40 | Mtr |
|---|
| 45 | 45 | Providing and fixing rectangular high density polyethylene water storage\nloft tank with cover, conforming to ISI: 12701, colour of opaque white or\nas approved by Engineer-in-charge. The rate includes making necessary\nholes for inlet, outlet & over flow pipes. The base support i/c fittings &\nfixtures for tank shall be paid separately. | | 5000 | Ltr |
|---|
| 46 | 46 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete | | 24.72 | sqm |
|---|
| 47 | 47 | Providing and fixing M.S. grills of required pattern in frames of windows etc.\nwith M.S. flats, square or round bars etc including priming coat with approved\nsteel primer all complete. Fixed to steel windows by welding | | 600 | Kg |
|---|
| 48 | 48 | Providing and fixing of motor of approved brand ISI make crumpton brand 1 HP inc. All accessories complete job. | | 1 | Each |
|---|
| 49 | 49 | Providing c;1nd fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps | | 2 | Each |
|---|
| 50 | 50 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception ,, of pipes and fittings | | 2 | Each |
|---|
| 51 | 51 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps,\nincluding cutting and making good the walls etc.: 15 mm dia. nominal bore medium | | 30 | Mtr |
|---|
| 52 | 52 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps,\nincluding cutting and making good the walls etc. 20 mm dia. nominal bore medium | | 20 | Each |
|---|
| 53 | 53 | Providing and fixing C.P. brass bib cock of approved qualityconforming to IS : 8931 a) 15 mm nominal bore | | 4 | Each |
|---|
| 54 | 54 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.a) 15 mm nominal bore | | 4 | Each |
|---|
| 55 | 55 | Providing and installation of Jet of approved brand | | 2 | Each |
|---|
| 56 | 56 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | | 2 | Each |
|---|
| 57 | 57 | Providing and fixing toilet paper holder C.P. brass | | 2 | Each |
|---|
| 58 | 58 | Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C. P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete | | 2 | Each |
|---|
| 59 | 59 | Supplying at site Angle iron posts & struts of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia etc. complete. | | 2054.12 | Kg |
|---|
| 60 | 60 | Providing and fixing of Double wire Mesh with angel | | 400 | Sft |
|---|
| 61 | 61 | Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality. Square shape 350mm internal dimensions | | 15 | Each |
|---|
| 62 | 62 | Providing and fixing PTMT soap dish holder having length of 138mm, breadth 1 02mm, heigth of 75mm with concealed fitting arrangements, weighing not less than 1 06gms. | | 2 | Each |
|---|
| 63 | 63 | Providing and fixing Ornamental Steel Rainling of supreme Brand jindal or equivalent brand | | 300 | Rft |
|---|
| 64 | 64 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 100 mm diameter | | 2 | Each |
|---|
| 65 | 65 | Providing and fixing Service Line(Aluminium 10 sq m) | | 120 | Mtr |
|---|
| 66 | 66 | Iron D Box of standrad make , 18 way. | | 4 | Each |
|---|
| 67 | 67 | MCB 6-32 Amp. | | 24 | Each |
|---|
| 68 | 68 | MCB 6-40 Amp. | | 16 | Each |
|---|
| 69 | 69 | 5 Pin Sockets points including switch | | 96 | Each |
|---|
| 70 | 70 | Provision of Heating point | | 32 | Each |
|---|
| 71 | 71 | CFL saver 18 watt of approved quality. | | 48 | Each |
|---|
| 72 | 72 | Helium light of approved quality. | | 4 | Each |
|---|
| 73 | 73 | Providing,Installation,testing and commissioning of Gyser of 25 lt . Size of Bajaj, Orient, Khaitan, Usha or Polar brand and manufacturers. | | 1 | Each |
|---|
| 74 | 74 | Providing,Installation,testing and commissioning of cieling fan . Size of Bajaj, Orient, Khaitan, Usha or Polar brand and manufacturers. | | 4 | Each |
|---|
| 75 | 75 | Providing,Installation,testing and commissioning of wall hanging fan . Size of Bajaj, Orient, Khaitan, Usha or Polar brand and manufacturers. | | 4 | Each |
|---|
| 76 | 76 | Providing,Installation,testing and commissioning of Exhaust 450 mm dia. Size of Bajaj, Orient, Khaitan, Usha or Polar brand and manufacturers. | | 2 | Each |
|---|
| 77 | 77 | Supply,Design,Installation,Testing and commissioning of 3x4x1 pannel outdoor type IP66 productive control made up of MS sheet steel duly paid and earthed as required | | 1 | Each |
|---|
| 78 | 78 | Providing and fixing of 8 mtr Steel Tubular Pole with silver paint as per the direction of incharge engineer at site with Low Mast Light with complete job. | | 10 | Each |
|---|
| 79 | 79 | Construction of Culvert | | 2 | Each |
|---|
