| 1 | 1 | Earth work in excavation of foundation in hard soil or gravelly soil with all leads and lifts including dressing and leveling the bed and depositing the excavated earth at places away from work site with all leads and lifts including cost of all labour, labour CESS, T&P and dewatering if required for the work etc. complete in all respects as directed by the Engineer-in-charge. | BI01010001010000000000000515BI0100001112 | 94.09 | Cubic Meter |
|---|
| 2 | 2 | Supplying & filling in foundation and plinth with good quality river sand in layers not exceeding 23cm in depth and compacted with watering, ramming, dressed and leveled the top surface to required gradient including cost , conveyance , royaoity of all materials, cost of all labour, T&P, etc.required to complete the work in all respect as per direction of the Engineer-in-charge.(Measurement willl be taken on finished compacted section only) | BI01010001010000000000000515BI0100001112 | 81.8 | Cubic Meter |
|---|
| 3 | 3 | Filling foundation and plinth & sides of foundation with excavated materials (excluding rock), in layers not exceeding 20 cm in depth including watering and ramming and dressing and leveling the top to proper level, lead up to 50 m and lift upto 1.5 m or gradient including cost of all labour, labour CESS,sundries and T&P etc. complete in all respect as per direction of the Engineer-in-Charege | BI01010001010000000000000515BI0100001112 | 94.09 | Cubic Meter |
|---|
| 4 | 4 | Providing and laying cement concrete (1:3:6) in foundation & plinth using 40mm size black hard granite crusher broken metal and screened and washed sharp river sand of approved quality from approved quarry as per approved design including hoisting, lowering, laying and compacting to proper thickness, watering and curing for the required period, finished smooth, providing grooves of beads where necessary including cost, conveyance, royalty of all materials with labour, labour CESS , and T&P etc. required to complete the work in all respect including dewatering if required as per direction of the Engineer-in-Charge. | BI01010001010000000000000515BI0100001113 | 24.76 | Cubic Meter |
|---|
| 5 | 5 | Fly ash brick masonry in cement mortar (1:6) in Foundation& Plinth using Fly ash bricks of (23x11x8cm) size having a crushing strength of not less than 75 kg per Sq.cm with dimensional tolerance + 8 percent after immersing Bricks in water till saturation before use , including splays cutting, circular molding, chamfering, corbelling and all similar type of operations with all necessary projections watering, curing etc. complete including cost, conveyance, royalties, of all materials, cost of all labour, labour CESS T&P etc. complete in all respect as drawing and technical specifications and as per directed by the Engineer-in-charge. | BI01010001010000000000000515BI0100001113 | 9.96 | Cubic Meter |
|---|
| 6 | 6 | R.C.C. work with M-20 grade In Different RCC Works having minimum compressive strength in work test of 200 Kg/Cm² in 15cm cubes at 28 days after mixing and texts conducted in accordance with relevance IS code using 20 mm and downgraded size black hard granite crusher broken stone chips and screened and washed sharp river sand of approved quality and from approved quarry including hoisting lowering and laying concrete and compacting by using vibrator, watering, curing for 28 days, including cost of centering & shuttering and finishing the exposed surface smooth providing grooves or beads where necessary including cost, conveyance, royalty of all materials , cost of all labour, labour CESS T&P etc. required for complete the work in all respect but excluding cost and conveyance of M.S. rods or Tor steel & binding wires and labour charges for strengthening, cutting, bending grills and placing in proper position as per the direction of the Engineer-in-Charge.\n(RCC Column Base /Footing) | BI01010001010000000000000515BI0100001114 | 12.4 | Cubic Meter |
|---|
| 7 | 6.01 | RCC GRADE BEAM/PLINTH BAND | BI01010001010000000000000515BI0100001114 | 7.25 | Cubic Meter |
|---|
| 8 | 6.02 | RCC COLUMN \n (Ground Floor) | BI01010001010000000000000515BI0100001114 | 6.4 | Cubic Meter |
|---|
| 9 | 6.03 | RCC COLUMN \n (1st. Floor) | BI01010001010000000000000515BI0100001114 | 1.45 | Cubic Meter |
|---|
| 10 | 6.04 | RCC LINTEL (Ground Floor) | BI01010001010000000000000515BI0100001114 | 0.76 | Cubic Meter |
|---|
| 11 | 6.05 | RCC LINTEL (1st. Floor) | BI01010001010000000000000515BI0100001114 | 0.44 | Cubic Meter |
|---|
| 12 | 6.06 | RCC CHAJJA (Ground Floor) | BI01010001010000000000000515BI0100001114 | 4.05 | Square Meter |
|---|
| 13 | 6.07 | RCC CHAJJA (1st. Floor) | BI01010001010000000000000515BI0100001114 | 1.62 | Square Meter |
|---|
| 14 | 6.08 | RCC ROOF BEAM (Ground Floor) | BI01010001010000000000000515BI0100001114 | 5.39 | Cubic Meter |
|---|
| 15 | 6.09 | RCC ROOF BEAM (1st. Floor) | BI01010001010000000000000515BI0100001114 | 2.75 | Cubic Meter |
|---|
| 16 | 6.1 | RCC ROOF SLAB (Ground Floor) | BI01010001010000000000000515BI0100001114 | 12.87 | Cubic Meter |
|---|
| 17 | 6.11 | RCC ROOF SLAB (1st. Floor) | BI01010001010000000000000515BI0100001114 | 3.62 | Cubic Meter |
|---|
| 18 | 6.12 | RCC STAIR CASE (Ground Floor) | BI01010001010000000000000515BI0100001114 | 2.66 | Cubic Meter |
|---|
| 19 | 6.13 | RCC STAIR CASE (1st. Floor) | BI01010001010000000000000515BI0100001114 | 2.12 | Cubic Meter |
|---|
| 20 | 7 | Supplying, fitting and placing uncoated SeQR TMT bar reinforcement including straightening bent up or coiled rods, cutting, bending, cranking, hooking, welding or jointing (if required) and binding, tying and placing in proper position as required for RCC works including cost, conveyance of steel and binding wires of 18 to 20 gauge and cost of all labour, labour CESS T&P etc. required for complete the work in all respect as per drawing and technical specification and directed by the Engineer-in-charge. (Weight of reinforcement shall be calculated on the basis of IS 1732, wastage ,overlaps, couplings, welded joints ,spacer bars, chairs, stays, and annealed steel wire or other method of binding &placing shall not be considered for payment).\n(Ground Floor) | BI01010001010000000000000515BI0100001114 | 64.33 | Quintal |
|---|
| 21 | 7.01 | (1st. Floor) | BI01010001010000000000000515BI0100001114 | 18.02 | Quintal |
|---|
| 22 | 8 | Fly ash brick masonry in cement mortar (1:6) in Super structure using Fly ash bricks of (23x11x8cm) size having a crushing strength of not less than 75 kg per Sq.cm with dimensional tolerance + 8 percent after immersing Bricks in water till saturation before use , including splays cutting, circular molding, chamfering, corbelling and all similar type of operations with all necessary projections watering, curing etc. complete including cost, conveyance, royalties, of all materials, cost of all labour, labour CESS T&P ,Scaffolding as required etc. complete in all respect as drawing and technical specifications and as per directed by the Engineer-in-charge.(Ground Floor) | BI01010001010000000000000515BI0100001114 | 23.9 | Cubic Meter |
|---|
| 23 | 8.01 | (1st. Floor) | BI01010001010000000000000515BI0100001114 | 19.17 | Cubic Meter |
|---|
| 24 | 9 | Fly ash brick masonry in cement mortar (1:4) in Super structure using Fly ash bricks of (23x11x8cm) size having a crushing strength of not less than 75 kg per Sq.cm with dimensional tolerance + 8 percent after immersing Bricks in water till saturation before use , including splays cutting, circular molding, chamfering, corbelling and all similar type of operations with all necessary projections watering, curing etc. complete including cost, conveyance, royalties, of all materials, cost of all labour, labour CESS T&P ,Scaffolding as required etc. complete in all respect as drawing and technical specifications and as per directed by the Engineer-in-charge.[Ground Floor] | BI01010001010000000000000515BI0100001114 | 9.87 | Cubic Meter |
|---|
| 25 | 9.01 | (1st. Floor) | BI01010001010000000000000515BI0100001114 | 6 | Cubic Meter |
|---|
| 26 | 10 | Providing 24 mm thick(12mm thick thick in two layers) cement plaster with cement mortar (1:6) with screened and washed sharp river sand for mortar and finished smooth to the rough surface of walls after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials, cost of all labour, Labour CESS,T&P, and scaffolding as required to complete the work in all respect as per the Direction of the Engineer-in-charge .\n(Ground Floor) | BI01010001010000000000000515BI0100001114 | 130.49 | Square Meter |
|---|
| 27 | 10.01 | (1st. Floor) | BI01010001010000000000000515BI0100001114 | 84.92 | Square Meter |
|---|
| 28 | 11 | Providing 12 mm thick cement plaster with cement mortar (1:6) with screened and washed sharp river sand for mortar and finished smooth to the rough surface of walls after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials, cost of all labour, Labour CESS,T&P, and scaffolding as required to complete the work in all respect as per the Direction of the Engineer-in-charge .\n(Ground Floor) | BI01010001010000000000000515BI0100001114 | 308.57 | Square Meter |
|---|
| 29 | 11.01 | (1st. Floor) | BI01010001010000000000000515BI0100001114 | 123.65 | Square Meter |
|---|
| 30 | 12 | Providing 6mm. Thick cement plaster in cement mortar (1:4) to RCC surfaces finished smooth including closed deep chipping and slurry treatment using good quality screened and washed river sand, including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials, cost of all labour, Labour CESS,T&P, and scaffolding as required to complete the work in all respect as per the Direction of the Engineer-in-charge .(Ground Floor) | BI01010001010000000000000515BI0100001114 | 102.19 | Square Meter |
|---|
| 31 | 12.01 | (1st. Floor) | BI01010001010000000000000515BI0100001114 | 27.87 | Square Meter |
|---|
| 32 | 13 | Providing ,Supplying fitting and fixing of Polished Vitrified floor tiles of premium grade having thickness 8mm to 10mm confirming to IS 15622:2006 (Group-B la) of size 600mm x 600mm, Plain Ivory, in floors and treads on steps and landing on 20mm thick bed of cement mortar 1:4(1 cement : 4 screened and washed river sand ) jointed with neat white cement mixed with pigment to match he shades of the tiles ,curing for required days , including cost of pre cast tiles , cost , conveyance , royalty of all materials, cost of all labour , labour CESS and T&P required to complete the work in all respect as per specification and direction of Engineer-in-charge.(Ground Floor) | | 102.19 | Square Meter |
|---|
| 33 | 13.01 | (1st. Floor) | BI01010001010000000000000515BI0100001114 | 27.87 | Square Meter |
|---|
| 34 | 14 | Providing ,Supplying fitting and fixing of Polished Vitrified tiles of premium grade having thickness 8mm to 10mm confirming to IS 15622:2006 (Group-B la) of size 600mm x 600mm . Plain Ivory, in Dados skirting and rises of steps on 12mm thick cement plaster 1:3 (1 cement :3 screened and washed river sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles , ,curing for required days , including cost of pre cast tiles , cost , conveyance , royalty of all materials, cost of all labour , labour CESS and T&P required to complete the work in all respect as per specification and direction of Engineer-in-charge.(Ground Floor) | | 11.7 | Square Meter |
|---|
| 35 | 14.01 | (1st. Floor) | BI01010001010000000000000515BI0100001114 | 5.64 | Square Meter |
|---|
| 36 | 15 | Providing ,Supplying fitting and fixing of Granite tiles minimum 20mm thick ,[ above 0.40 Sqm ] in floors and treads on steps and landing on 20mm thick bed of cement mortar 1:4(1 cement :4 sand) jointed with neat cement mixed with pigment to match the shade of the tiles including rubbing and polishing complete including cost of Granite tiles , curing for required days , including cost of marble tiles , cost , conveyance , royalty of all materials, cost of all labour , labour CESS and T&P required to complete the work in all respect as per specification and direction of Engineer-in-charge. | | 17.66 | Square Meter |
|---|
| 37 | 15.01 | (1st. Floor) | BI01010001010000000000000515BI0100001114 | 12.95 | Square Meter |
|---|
| 38 | 16 | Supplying, fitting and fixing in position dressed and well seasoned sal wood work framed and fixed (wrought and put up) in choukaths (0’3” x 0’4”) size for doors, windows and ventilators including cost of iron work and coal tarring 2 coats, to wall side faces of choukaths including cost of coal tar, cutting grooves and mending to size where necessary with cost , conveyance, of all materials and labour ,labour CESS, T&P etc. required to complete the work in all respect in all floors as directed by the Engineer-In-Charge. [0.25+0.19]cum | | 0.44 | Cubic Meter |
|---|
| 39 | 17 | Supplying fitting and fixing of approved make 35mm thick (Laminate finished thickness of the door) factory made flush doors of required sizes finished with 1mm thick laminate of approved colour and shade to both side fixed to the teak wood bidding complete in all respect, bidding / lipping as per drawing and design. The door will be provided with all necessary fittings and fixtures of approved make , with cost, conveyance of all materials, labour, labour CESS, all fittings and fixtures, T & P as required for complete the work & fixed in position etc. complete in all respect in all floors as directed by the Engineer-In-Charge. | | 19.12 | Square Meter |
|---|
| 40 | 18 | Supplying, fitting & fixing of MS Window grills, grill gates and Doors made of ISI marked MS angle, M.S Flat or M.S square bars (10mm) and all fittings and fixtures of approved design and specification including cost, conveyance, fabrication of all materials, cost of all labour, labour CESS and T&P. etc. required to complete the work in all respect, in all floors as per direction of Engineer-in-Charge. | BI01010001010000000000000515BI0100001114 | 391.51 | Kilogram |
|---|
| 41 | 19 | Supplying fitting fixing aluminium windows [ sliding type ] made up poweder coated (minimum 50 microne thicknes if powder coating )aluminium section 9778 as window frame , section no. 4095,4096, and 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement including cost of all fittings & fixtures ,including cost carriage of all materials [excluding cost of black glass] , including cost of all labour , labour CESS , hire and running charges of drill machine ,T&P required to complete the work in all respect as per specification and direction of the Engineer-in-charge in all floors.[57.02+19.60] | BI01010001010000000000000515BI0100001114 | 76.62 | Kilogram |
|---|
| 42 | 20 | Supplying, fitting and fixing of Black glass panes of 5mm thick cutting to size of approved quality in panels of aluminium doors ,ventilators and windows fitted and fixed with beading as required with cost, conveyance, labour and T & P etc complete as directed by the Engineer-In-charge(11.66+4.01) | BI01010001010000000000000515BI0100001114 | 15.67 | Square Meter |
|---|
| 43 | 21 | Supplying, fitting, fixing of stainless steel of 304 grade in hand railing using 50mm dia. of 2mm thick circular pipe with balustrade of size 32mmx32mmx2mm @ 0.90m c/c and stainless square pipe bracing of size 32mmx32mmx2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance, of all materials, labour, T&P required for completion of the work in all respect as per the direction of the Engineer- in - charge.[44.54+107.42]Kg | | 151.96 | Kilogram |
|---|
| 44 | 22 | Providing and Finishing surfaces of walls & ceiling with cement based wall putty [ water based ] of approved make and finished smooth and even surface to receive painting including cost of scaffolding ,staging and cost , conveyance of all the materials ,including cost of all labour, labour CESS and T&P required to complete the work in all respect as per specification and direction of the Engineer-in-charge. | | 541.25 | Square Meter |
|---|
| 45 | 22.01 | (1st. Floor) | BI01010001010000000000000515BI0100001114 | 236.44 | Square Meter |
|---|
| 46 | 23 | Providing and Painting the surface of the walls with one coat of wall primer(water based) of approved quality after cleaning the plastered surface perfectly by watering and brushing including cost , conveyance of all material, brushes, all labour, scaffolding, T&P etc. required to complete the work in all respect as per specification and direction of the engineer-in-charge.(GROUND FLOOR) | BI01010001010000000000000515BI0100001114 | 541.25 | Square Meter |
|---|
| 47 | 23.01 | (1st. Floor) | BI01010001010000000000000515BI0100001114 | 236.44 | Square Meter |
|---|
| 48 | 24 | Finishing interior surfaces of walls with two coats of Plastic emulsion paint of approved quality and shade from a recognized company to give an even shade including preparation of the surface before applying , including cost of scaffolding ,staging and cost ,conveyance of all materials ,cost of all labour, labour CESS and T&P required to complete the work in all respect as per specification and direction of the Engineer-in-charge.[Ground Floor] | | 410.76 | Square Meter |
|---|
| 49 | 24.01 | (1st. Floor) | BI01010001010000000000000515BI0100001114 | 151.52 | Square Meter |
|---|
| 50 | 25 | Providing & painting exterior surfaces of walls with two coats of Weather seal coat paint of approved quality and shade from a recognized company to give an even shade, after cleaning the plastered surface perfectly by watering and brushing including cost of scaffolding ,staging and cost ,conveyance of all materials ,all labour, labour CESS and T&P required to complete the work in all respect as per specification and direction of the Engineer-in-charge. | | 130.49 | Square Meter |
|---|
| 51 | 25.01 | (1st. Floor) | BI01010001010000000000000515BI0100001114 | 84.92 | Square Meter |
|---|
| 52 | 26 | Painting 2 (Two) coats with synthetic enamel paint to wood work over a coat of primer of approved colour, shade after sand papering , polishing the surface including cost, conveyance of all materials, all labour, labour CESS T&P , scaffolding etc. required to complete the work in all respect as per drawing and technical specification and direction of Engineer-in-Charge.[Ground Floor] | | 7.88 | Square Meter |
|---|
| 53 | 26.01 | (1st. Floor) | BI01010001010000000000000515BI0100001114 | 6.17 | Square Meter |
|---|
| 54 | 27 | Painting 2 (Two) coats with synthetic enamel paint to steel work over a coat of primer of approved colour, shade after sand papering , polishing the surface including cost, conveyance of all materials, all labour, labour CESS T&P , scaffolding etc. required to complete the work in all respect as per drawing and technical specification and direction of Engineer-in-Charge.[Ground Floor] | | 25.64 | Square Meter |
|---|
| 55 | 27.01 | (1st. Floor) | BI01010001010000000000000515BI0100001114 | 8.81 | Square Meter |
|---|
| 56 | 28 | Providing and laying cement concrete (1:2:4) using 12mm size black hard granite crusher broken chips and screened and washed sharp river sand of approved quality from approved quarry as per approved design including hoisting, lowering, laying and compacting to proper thickness, watering and curing for the required period, finished smooth , providing grooves or beads where necessary including cost, conveyance, royalty of all materials with labour, labour CESS , and T&P etc. required to complete the work in all respect including dewatering if required as per direction of the Engineer-in-Charge. | BI01010001010000000000000515BI0100001112 | 2.45 | Cubic Meter |
|---|
| 57 | 29 | Providing and laying 2.50 cm thick Grading Concrete over roof slab with cement concrete (1:2:2) using 4.7mm size black hard granite crusher broken chips and screened & washed sharp river sand of approved quality from approved quarry and finished smooth, including watering and curing for the required period including cost, conveyance, royalties of all materials, cost of all labour, labour CESS, T&P etc. required to complete the work in all respect as per direction of the Engineer-in-Charge.(Trrrace Floor) | | 102.19 | Square Meter |
|---|
