Delhi Urban Shelter Improvement Board has published Gia To Dusib For Existing Infrastructure Replacement Of Dilapidated Ac Sheet Roofing With Gi Sheet In Barrack Of Block I , J And K And Up-Gradation Remaining 97 Nos . Rooms At Vikas Kutir , Dusib Hq Building , Ito . . Submission Date for this Tender is 30-04-2021. Shed Construction Tenders in ITO Delhi. Bidders can get complete Tender details and download the document.
| Name of Work: GIA to DUSIB for existing infrastructure SH : Replacement of dilapidated AC sheet roofing with GI sheet in barrack of Block I, J and K and Up-gradation remaining 97 nos. rooms at Vikas Kutir, DUSIB HQ Building, ITO. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Carriage of material by manual labour i/c unloading and stacking for lead less than 0.50 KM line morrum building rubhish such additional lead of 50 meter or part thereof beyond 1st 50 meter upto 9 such additional leads. | 538.12 | Cum | |
| 2 | 2 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift up to 1.5 m, as directed by Engineer-in-Charge: \nAll kinds of soil | 1437.75 | Sqm | |
| 3 | 3 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, inlayers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : \nAll kinds of soil \nPipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia | 50 | m | |
| 4 | 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : \n1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | 2 | Cum | |
| 5 | 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : \n1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) | 5 | Cum | |
| 6 | 6 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: \nCement mortar 1:4 (1 cement : 4 coarse sand) | 2 | Cum | |
| 7 | 7 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : \nCement mortar 1:4 (1 cement : 4 coarse sand) | 2 | Cum | |
| 8 | 8 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in. \nCement mortar 1:4 (1 cement : 4 coarse sand) | 10 | Sqm | |
| 9 | 9 | Stone tile work for wall lining upto 10 m height with special adhesive over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement with an admixture of pigment to match the stone shade\n8mm thick (mirror polished and machine cut edge) \nGranite stone of any colour and shade. | 1334.4 | Sqm | |
| 10 | 10 | Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. \nFastener with threaded dia 10 mm. | 920 | Each | |
| 11 | 11 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : \nSal wood | 1.73 | Cum | |
| 12 | 12 | Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). \n18 mm thick | 90.08 | Sqm | |
| 13 | 13 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : \n30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. | 28.35 | Sqm | |
| 14 | 14 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. | 2 | Each | |
| 15 | 15 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000mm) with double speed adjustment with necessary accessories and screws etc. complete. | 110 | Each | |
| 16 | 16 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : \n300x16 mm | 15 | Each | |
| 17 | 17 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : \n250x10 mm | 456 | Each | |
| 18 | 18 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : \n125 mm | 486 | Each | |
| 19 | 19 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 500 | Kg | |
| 20 | 20 | Welding by gas or electric plant including transportation of plant at site etc. complete. | 2000 | cm | |
| 21 | 21 | Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. \nIn gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. | 120 | Kg | |
| 22 | 22 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : \n25 mm thick. | 252 | Sqm | |
| 23 | 23 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. | 27 | Sqm | |
| 24 | 24 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. | 1821.71 | Sqm | |
| 25 | 25 | Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours White, Ivory, Rey, Fume Red Brown, laid on 20mm thick cement mortar 1:4 (1Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigments etc., complete. | 5.23 | Sqm | |
| 26 | 26 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. \nSize of Tile 600x600 mm | 34.79 | Sqm | |
| 27 | 27 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. \nSize of Tile 800x800 mm | 2159.9 | Sqm | |
| 28 | 28 | Rubbing and polishing old existing kota stone flooring having minimum 5 year old of all thickness complete including cost of labour, material, T&P etc. as per direction of Engineer-in-Charge. | 1823.92 | Sqm | |
| 29 | 29 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm ( + 0.05 %), total coated thickness with zinc coating 120 gm per sqm as per IS:277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 1623.48 | Sqm | |
| 30 | 30 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 gm per sqm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : \nRidges plain (500 - 600mm). | 97.8 | m | |
| 31 | 31 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 gm per sqm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : \nGutter .(600 mm over all girth). | 217.8 | m | |
| 32 | 32 | Providing high impact Polypropylene reinforced cement 6mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required. | 144 | Sqm | |
| 33 | 33 | Extra for straight cutting in polypropylene reinforced cement corrugated, semi-corrugated 6 mm thick sheet roofing for making openings of area exceeding 40 square decimeter for chimney stacks, skylights etc. | 30 | m | |
| 34 | 34 | Extra for circular cutting in polypropylene reinforced cement corrugated/ semi-corrugated 6 mm thick sheet roofing for making openings of area exceeding 40 square decimeter. | 20 | m | |
| 35 | 35 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. \nMain "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. \n12.5mm thick square edge PVC Laminated Gypsum Tile of size 595x595mm, made of Gypsum plasterboard; manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the backside with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. | 2140.29 | Sqm | |
| 36 | 36 | 12 mm cement plaster of mix : \n1:4 (1 cement: 4 fine sand) | 2323.59 | Sqm | |
| 37 | 37 | 15 mm cement plaster on the rough side of single or half brick wall of mix : \n1:4 (1 cement: 4 fine sand) | 8537.4 | Sqm | |
| 38 | 38 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. \nNew work (two or more coats) over and including water thinnable priming coat with cement primer. | 10156.8 | Sqm | |
| 39 | 39 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade \nNew work (Two or more coats applied @ 1.43 ltr/ 10 sqm. over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm). | 4066.12 | Sqm | |
| 40 | 40 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : \nTwo or more coats on new work. | 69.66 | Sqm | |
| 41 | 41 | 24 mm thick Washed marble chips plaster lon exterior walls of height upto 10 metre above ground level, in two layers, under layer 12mm cement plaster 1:4 (1cement: 4 coarse sand), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 12mm marble chips plaster 4:7 (4 cement: 7 marble chips 4 mm size), in panels with groove all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the marble chips complete as per specification and direction of Engineer-in- charge (Payment for providing grooves shall be made separately). | 150 | Sqm | |
| 42 | 42 | Forming groove of uniform size from 12x12mm and upto 25x15mm in the top layer of washed stone grit plastered surface as per approved pattern, including providing and fixing aluminum channels of appropriate size and thickness (not less than 2 mm), nailed to the under layer with rust proof screws and nails and finishing the groove complete as per specifications and direction of the Engineer-in-Charge. | 150 | m | |
| 43 | 43 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | 10156.8 | Sqm | |
| 44 | 44 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete | 4415.18 | Sqm | |
| 45 | 45 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : \nOne or more coats on old work. | 1214.83 | Sqm | |
| 46 | 46 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. \nNominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | 207.78 | Cum | |
| 47 | 47 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : \nOf area 3 sq. metres and below | 247 | Each | |
| 48 | 48 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. \nFor thickness of tiles 10 mm to 25 mm | 5.23 | Sqm | |
| 49 | 49 | Dismantling wooden trellis work excluding frames but including stacking the serviceable material within 50 metres lead.. | 90.08 | Sqm | |
| 50 | 50 | Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : \nUp to 10 mm thick | 314.25 | Sqm | |
| 51 | 51 | Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. | 1623.48 | Sqm | |
| 52 | 52 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | 14017.1 | Sqm | |
| 53 | 53 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all loads including all lifts involved. | 538.12 | Cum | |
| 54 | 54 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m) having 50 no rounds per 6 metre length, upto 3m height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) /Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) | 80 | Metre | |
| 55 | 55 | Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in charge. (The panel shuttering work shall be paid for separately). (Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately). | 29.95 | Cum | |
| 56 | 56 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device(handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : \nWhite Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. | 5 | Each | |
| 57 | 57 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : \nW.C. pan with ISI marked white solid plastic seat and lid | 5 | Each | |
| 58 | 58 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : \nWhite Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. | 10 | Each | |
| 59 | 59 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. \nSemi rigid pipe \n32 mm dia | 10 | Each | |
| 60 | 60 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | 5 | Each | |
| 61 | 61 | Providing and fixing soil, waste and vent pipes : \n100 mm dia. \nCentrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989. | 110 | m | |
| 62 | 62 | Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes : \n100 mm dia pipe | 36 | Each | |
| 63 | 63 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. \n450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms. | 10 | Each | |
| 64 | 64 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/ make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. | 3 | Each | |
| 65 | 65 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall. \n15 mm dia. nominal bore | 55 | metre | |
| 66 | 66 | Providing and fixing brass bib cock of approved quality : \n15 mm nominal bore | 15 | Each | |
| 67 | 67 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : \n25 mm nominal bore | 4 | Each | |
| 68 | 68 | Providing and fixing uplasticised PVC connection pipe with brass unions : \n30 cm length \n15 mm nominal bore | 20 | Each | |
| 69 | 69 | Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work : \n15 mm diameter pipe. | 55 | metre | |
| 70 | 70 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) \n15 mm nominal bore | 10 | Each | |
| 71 | 71 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | 7000 | Litre | |
| 72 | 72 | Providing and fixing PTMT bib cock of approved quality and colour. \n15mm nominal bore, 86 mm long. Weighing not less than 88 gms. | 20 | Each | |
| 73 | 73 | Providing and fixing PTMT stop cock of approved quality and colour. \n15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. | 20 | Each | |
| 74 | 74 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : \n250 mm dia. R.C.C. pipe | 50 | m | |
| 75 | 75 | Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : \nWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | 2 | Each | |
| 76 | 76 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : \nFor fixed portion \nAnodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | 1909.8 | Kg | |
| 77 | 77 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)\nAnodised aluminium (anodised transparent or dyed to reuired shade according to IS : 1865, Minimum anodic coating of grade Ac 15) | 3303.72 | kg | |
| 78 | 78 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. \nPre-laminated particle board with decorative lamination on one side and balancing lamination on other side. | 3.78 | Sqm | |
| 79 | 79 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): \nWith float glass panes of 4.0 mm thickness | 250.02 | Sqm | |
| 80 | 80 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors ,embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. \nWith stainless steel cover plate minimum 1.25 mm thickness. | 4 | Each | |
| 81 | 81 | Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. \nUpto 5mm depth and 5 mm width | 966 | m | |
| 82 | 82 | Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge. \nAnodized (AC 15 ) aluminium tubular handle bar | 8 | Each | |
| 83 | 83 | Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. | 4 | Each | |
| 84 | 84 | Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/ stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). | 50 | Kg | |
| 85 | 85 | Grading roof for water proofing treatment with\nCement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | 3.33 | Cum | |
| 86 | 86 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc. to be paid separately). | 7.56 | Sqm | |
| 87 | 87 | Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 ltr/sqm. by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/ltr and viscosity 70 -160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C.Cold flexibility shall be upto -2°C when tested in accordance with ASTM,D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacture of membrane. \n3 mm thick | 66.5 | Sqm | |
| 88 | 88 | Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm mm x 1.6 mm complete, all as per direction of Engineer-in-charge. | 245 | Each | |
| 89 | 89 | Supply of beldar/Labour for shifting Almirah | 240 | Days | |
| 90 | 90 | Deduct for issuing old reterived steel to the contractor as scrap | 487.5 | Kg | |
| 91 | 91 | Supply of fiber (high impact poly propylene reinforced cement corrugated apron piece | 80 | Sqm | |
| 92 | 92 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level\n1:5:10 (1 cement : 5 manufactured sand deríved from Rrcycle concrete aggregate(RCA ) : 10 graded stone aggregate 40 mm nominal size Recycle aggregate (RA) | 207 | Cum | |
| 93 | 93 | Providing and laying 60 mm thick factory made cement concrete paver blocks of approved shape and colour of M-30 grade made of C & D waste by block making machine with vibratory compaction laid in required pattern and including over 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per direction of Engineerin- Charge. | 1437.75 | Sqm | |
| 94 | 94 | Add 13.33% for cost index | 1.98825e+07 | % | |
| 95 | 95 | Less 9.50% as per orders of Delhi Govt. | 2.44345e+07 | % |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
