Department Of Agriculture And Food has published Construction Of Farmers Training And Skill Development Center At Sundargarh Dist-Sundargarh. Submission Date for this Tender is 01-05-2021. Building Work Tenders in Sundargarh Odisha. Bidders can get complete Tender details and download the document.
| Name of Work: Construction of Farmers Training & Skill Development Center at Sundargarh Dist-Sundargarh | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earthwork in excavation of foundation in all kinds of soil within initial lead and initial lift including rough dressing and breaking rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 m in depth including cost and conveyance, royalty & taxes of all materials and cost of all labour T&P required for the work,Labour welfare cess@1% etc. complete as per the direction of the EIC. | 309.335 | Cum | |
| 2 | 2 | Supplying, Filling sand in foundation & plinth well watered and rammed including cost, conveyance, taxes, royalty of sand, labour & T&P, Labour welfare cess@1% etc. complete as per specification and direction of the EIC. | 441.16 | Cum | |
| 3 | 3 | Cement Concrete (1:4:8) by using 40 mm size hard granite crusher broken chips of approved quality and form approved quarry including lowering laying concrete, watering and curing etc. complete for required levels laid in layers including cost and conveyance, royalty & taxes of all materials and cost of all labour T&P required for the work,Labour welfare cess@1% etc. complete as per the direction of the EIC. | 73.747 | Cum | |
| 4 | 4 | Plain cment concrete (1:2:4) using 12 mm size hard granite crusher broken chips of approved quality and form approved quarry including lowering laying concrete, watering and curing etc. complete for required levels laid in layers including cost and conveyance, royalty & taxes of all materials and cost of all labour T&P required for the work,Labour welfare cess@1% etc. complete as per the direction of the EIC. | 14.237 | Cum | |
| 5 | 5 | Reinforced Cement Concrete M20 grade 20mm & down graded size hard granite crusher broken chips of approved quality and from approved quarry including centring, shuttering, lowering, laying concrete, watering and curing etc. complete for required levels laid in layers including cost, conveyance, royalty and taxes of all materials and cost of labour, T&P,Labour Welfare cess @1% required for the work etc. complete as per specification and direction for the EIC. | |||
| 6 | 6 | In ground floor | |||
| 7 | 7 | Column base, frustum, plinth band | 56.404 | Cum | |
| 8 | 8 | Bed Block | 5.443 | Cum | |
| 9 | 9 | Column and Beam | 29.635 | Cum | |
| 10 | 10 | Lintel | 5.516 | Cum | |
| 11 | 11 | Sun shade and Chajja | 1.214 | Cum | |
| 12 | 12 | Roof slab | 48.296 | Cum | |
| 13 | 13 | Stair case | 4.643 | Cum | |
| 14 | 14 | In first floor | |||
| 15 | 15 | Bed Block | 4.361 | Cum | |
| 16 | 16 | Column and Beam | 20.57 | Cum | |
| 17 | 17 | Lintel | 5.484 | Cum | |
| 18 | 18 | Sun shade and Chajja | 3.489 | Cum | |
| 19 | 19 | Roof slab | 46.366 | Cum | |
| 20 | 20 | Stair case | 4.584 | Cum | |
| 21 | 21 | Supplying MS round / deformed / tor steel reinforcement bars (of only manufacturing companies such as SAIL / RINL / TATA / JINDAL STEEL / SHYAM STEEL) (of approved grade) of required diameters of approved quality including straightening, cutting to size, bending, and binding, lifting and placing in position as per design, complete including cost of bars, binding wires 18 gauge, including cost of all materials , labour, conveyance, loading and unloading, taxes, cess, royalties. sundries, tools and plants etc. Labour Welfare cess @1% complete as per the direction of the EIC. (Linear measurement will be taken and quantity will be calculated on standard weight for all heights). | |||
| 22 | 22 | In ground floor | 170.814 | Qtl | |
| 23 | 23 | In first floor | 93.749 | Qtl | |
| 24 | 24 | Providing Fly Ash brick masonry work using 230 mm X 110 mm X 80 mm (with dimensional tolerance of ± 2% ) Fly Ash bricks having crushing strength not less than 75 kg. / sq cm, mortar of mix 1:6 (1 cement : 6 sand) (Using Branded Cement), immersing the bricks for minimum 6 hrs in water before use, with all necessary projections, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading and unloading, taxes, cess, royalties, scaffolding, watering, curing, sundries, tools and plants,etc., Labour Welfare cess @1% complete as per the direction of the EIC. | |||
| 25 | 25 | Plinth & Foundation work | 11.288 | Cum | |
| 26 | 26 | Superpstrucutre work in ground floor | 83.278 | Cum | |
| 27 | 27 | Superpstrucutre work in first floor | 74.135 | Cum | |
| 28 | 28 | 6 mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chipping and slurry treatment complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC. | |||
| 29 | 29 | In ground floor | 539.638 | Sqm | |
| 30 | 30 | In first floor | 525.029 | Sqm | |
| 31 | 31 | 16 mm thick cement plaster in cement mortar (1:6) with watering and curing etc. complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC. | |||
| 32 | 32 | In ground floor | 722.815 | Sqm | |
| 33 | 33 | In first floor | 655.983 | Sqm | |
| 34 | 34 | 12 mm thick cement plaster in cement mortar (1:6) with watering and curing etc. complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC. | |||
| 35 | 35 | In ground floor | 345.155 | Sqm | |
| 36 | 36 | In first floor | 306.795 | Sqm | |
| 37 | 37 | 2.5 cm thick grading concrete [1:2:2 ] on roof slab with 6 mm size chips including rubbing and polishing etc. complete including watering and curing complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. | |||
| 38 | 38 | In ground floor | 58.8 | Sqm | |
| 39 | 39 | In first floor | 358.053 | Sqm | |
| 40 | 40 | Supplying, Fitting and fixing Vitrified tiles in Floors of size 600 mm x 600 mm of approved make conforming to IS13755 laid on 20 mm thick cement mortar [1:4] filling joined with white cement of approved quality icomplete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC. [For New work only] | |||
| 41 | 41 | In ground floor | 268.207 | Sqm | |
| 42 | 42 | In first floor | 265.627 | Sqm | |
| 43 | 43 | Fixing Ceramic tiles size 30 cm x 30 cm / 40 cm x 40 cm in Floors, Treads on steps & landing on 25 mm thick bed of cement mortar [1:1] joined with neat cement slurry mixed with pigment to match the shade of the Tiles including rubbing and polishing complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC. | |||
| 44 | 44 | In ground floor | 42.301 | Sqm | |
| 45 | 45 | In first floor | 5.102 | Sqm | |
| 46 | 46 | Fixing Ceramic tiles 20 cm x 30 cm / 20 cm x 20 cm in Dado, Skirting and rises of steps on 12 mm thick cement mortar [1:3] joined with neat cement slurry mixed with pigment to match the shade of the Tiles including rubbing and polishing complete including rubbing and polishing etc. complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. | |||
| 47 | 47 | In ground floor | 186.994 | sqm | |
| 48 | 48 | In first floor | 22.181 | sqm | |
| 49 | 49 | Fixing Kota tiles in floors treads of steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC. | |||
| 50 | 50 | In ground floor | 127.24 | Sqm | |
| 51 | 51 | In first floor | 113.92 | Sqm | |
| 52 | 52 | Extra labour for laying tile flooring on stair treads not exceeding 30cm in width including cost of forming, nosing etc. complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. | |||
| 53 | 53 | In ground floor | 40.5 | Sqm | |
| 54 | 54 | In first floor | 34.32 | Sqm | |
| 55 | 55 | Fixing Granite tiles up to 0.10 sqm 10 mm thick in Dado, Skirting and rises of steps on 12 mm thick cement mortar [1:3] joined with neat cement slurry mixed with pigment to match the shade of the Tiles including rubbing and polishing complete including rubbing and polishing etc. complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. | |||
| 56 | 56 | In first floor | 17.351 | Sqm | |
| 57 | 57 | Finishing wall surface of walls with Cement based wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC. | |||
| 58 | 58 | In ground floor | 1373.37 | Sqm | |
| 59 | 59 | In first floor | 1412.85 | Sqm | |
| 60 | 60 | Priming one coat to wall surface with water bound cement primer complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC. | |||
| 61 | 61 | In ground floor | 901.186 | Sqm | |
| 62 | 62 | In first floor | 1028.51 | Sqm | |
| 63 | 63 | Finishing inside walls with Distemper of approved shade on new work two coats to give an even shade complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC. | |||
| 64 | 64 | In ground floor | 901.186 | Sqm | |
| 65 | 65 | In first floor | 1028.51 | Sqm | |
| 66 | 66 | Finishing exterior walls with Weather Seal Coat Paint of approved shade on new work two coats to give an even shade complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC. | |||
| 67 | 67 | In ground floor | 472.187 | Sqm | |
| 68 | 68 | In first floor | 384.333 | Sqm | |
| 69 | 69 | Supplying, fitting & fixing in position & drawing of PVC/FRP panel type single doors shutter with chowkhat framed & fixed [with & Put up] complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC. | |||
| 70 | 70 | In ground floor | 14.7 | Sqm | |
| 71 | 71 | In first floor | 1.8 | Sqm | |
| 72 | 72 | Supplying, fitting & fixing in position & drawing of Aluminum door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and 12mm thick pre-laminated board fixed on door frame by means of tapered clip No.4660 and the frame to be completed by means of jointing angle No.1855 complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC. | |||
| 73 | 73 | In ground floor | 316.512 | Kg | |
| 74 | 74 | In first floor | 331.584 | Kg | |
| 75 | 75 | Supplying, fitting & fixing in position & drawing of Window (sliding type) made of aluminum section 9778 as windows frame section No. 4095, 4096, and 9777, 3994 as shutter frame with 5 mm thick black glass as panel fitted with rubber bending including locking arrangement including all fitting complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC. | |||
| 76 | 76 | In ground floor | 88.02 | Kg | |
| 77 | 77 | In first floor | 88.02 | Kg | |
| 78 | 78 | Supplying, fitting and fixing of powder coated M.S. collapsible gate/Window grill/Ventilator etc made out of M.S. square bar / M.S. flats / M.S. angles as per approved drawing and design, cutting to required size and welding properly, finished smooth and sand papering, complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. | |||
| 79 | 79 | In ground floor | 1990 | Kg | |
| 80 | 80 | In first floor | 2465.8 | Kg | |
| 81 | 81 | Priming one coat to surface with Red oxide Primer complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC. | |||
| 82 | 82 | In ground floor | 76.489 | Sqm | |
| 83 | 83 | In first floor | 170.686 | Sqm | |
| 84 | 84 | Painting two coats with approved Plastic Emulsion paint on new wood work complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC. | |||
| 85 | 85 | In ground floor | 76.489 | Sqm | |
| 86 | 86 | In first floor | 170.686 | Sqm | |
| 87 | 87 | Providing and fixing of Fixed Glazing with part Top hung of approved make to be fabricated from roll formed sections made of pre-painted steel (base steel as per IS-513 of 0.6 mm thick “D” quality, galvanized as per IS-277 with zinc of 120 Gm/Sq.mtr) with paint specification being with primer of 5-7 microns and finished paint with polyster paint (Black /Pearl white/ Chocolate Brown) of 12-16 microns alongwith the alkyd backer at the back of 5-7 microns and the sizes of outer frame being of 46x52 mm and with all vertical and horizontal mullions are of 46x70 mm and fixed beadings are of 18x25 mm. Top hung shutter should be of 46 x 46 mm. Accessories / gaskets are to be used as per the manufacturer’s supply and specification like handle being made of high grade aluminium powder coated and with nylon receiver and gasket will be made of EPDM. All corner brackets are to be made of CRCA with zinc phosphating. The mullion caps and louvered-clips should be of glass filled nylon. The sections are to be cut to length ,mitre joined with corner bracket and frames are fixed to the concrete/masonry walls by means of self-expanding screws and glass to be used of 5 mm reflective complete including all taxes cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. | |||
| 88 | 88 | In ground floor | 7.313 | Sqm | |
| 89 | 89 | In first floor | 7.313 | Sqm | |
| 90 | 90 | Providing and fixing of Sliding windows to be fabricated from roll formed sections made of pre-painted steel (base steel as per IS-513 of 0.6 mm thick “D” quality, galvanized as per IS-277 with zinc of 120 Gm/Sq.mtr) with total coated thickness of 0.55 mm .Slide guide section should be made of 0.5 mm stainless steel of 430 grade. with paint specification being with primer of 5-7 microns thick and finished paint with polyster paint (Black /Pearl white/ Chocolate Brown) of 12-16 microns alongwith the alkyd backer at the back of 5-7 microns and the Sections for external frame bottom and top should be of 79 x 45 mm. external frame sides should be of 69 x 24 mm, guide for top and bottom should be of 69 x 26 mm (Stainless Steel). Section for shutter should be of 26 x 30 mm, Sash bar should be of 23 x 57mm.Accessories / gaskets are to be used as per the manufacturer’s supply and specification like gasket will be made of EPDM. All corner brackets for internal and external are to be made of glass filled nylon. The sections are to be cut to length, joined and assembled by means of corner bracket and frames are fixed to the concrete/masonry walls by means of self expanding screws and glass to be used of 5 mm reflective complete including all taxes cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. | |||
| 91 | 91 | In ground floor | 3.645 | Sqm | |
| 92 | 92 | In first floor | 8.685 | Sqm | |
| 93 | 93 | Supplying, fitting & fixing in position & drawing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @0.90mtr. C/C and stainless square pipe barracking of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC. | |||
| 94 | 94 | In ground floor | 296.144 | Kg | |
| 95 | 95 | In first floor | 244.569 | Kg | |
| 96 | 96 | Providing, fitting, fixing up false ceiling of approved design and drawing in all floors with GI section of 4 walls to be fixed by means of steel screws and PVC plugs and GI grid 60 cm x 60 cm to be suspended from ceiling by using 12.5 mm thick Fire Line Gypsum Board complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC. | |||
| 97 | 97 | In ground floor | 153.594 | Sqm | |
| 98 | 98 | In first floor | 18.75 | Sqm | |
| 99 | 99 | Providing & Fixing of 80 mm thick interlocking Concrete Paver Block on sand base/floor complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. | 98.647 | Sqm | |
| 100 | 100 | Supplying, spreading and consolidating moorum by proper watering and rolling complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC. | 45.476 | Cum | |
| 101 | 101 | Cement punning including watering and curing complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC. | 24.18 | Sqm | |
| 102 | 102 | Supply, fixing of RCC pre-castrings of 0.9 m dia, 0.3 m height, 0.050 m wall thickness in soak pit complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC. | 12 | No. | |
| 103 | 103 | 10 cm thick dry brick khoa backing in soakpit complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC. | 0.566 | Cum | |
| 104 | 104 | Supplying all materials, labour, T&P and constricting inspection Chamber of inside size 760mmx760mmx460mm with cement(1:3:6)using 40mm size crusher broken hard black granite metal on bed, KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside R.C.C cover slab (1;2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, cost of all materials, conveyance of all materials to worksite, payment of royalty, all taxes etc all complete as per approved drawing P.H specification and direction of Engineer-in-charge. [Inside size 76cm x76 cmx 46cm with 18” dia RCC MH cover] | 2 | No. | |
| 105 | 105 | Supplying all materials, labour, T&P and constructing gully trap chamber of inside ‘size 250 mm x 250mm with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken in HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinth and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCL gully trap, 150mmx150mm size Cl grating etc, all complete as per drawing, specification and direction of Engineer-in-charge | 2 | No. | |
| 106 | 106 | Tube Well | |||
| 107 | 107 | Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination drilling rigs (1200 cfm/300psi) as required to suit to site condition as per direction of Engineer - in - charge including use of own rig with its accessories , tools and plant , and consumables,Labour welfare cess@1% etc. for lowering of 200 mm dia PVC/ Gl Pipes for housing , fitted with socket and with or without well screen as per the necessity for soft, medium hard and boulder formation (Gl/ PVC casing pipes if required to prevent collapse of over burden is to be provided by the contiactor including lowering and withdrawing after completion of the tube well) | |||
| 108 | 108 | 200x150 mm diameter : from 00 mtr. to 85 mtr. | 85 | mtr | |
| 109 | 109 | Lowering the following size GI/PVC pipes with or without slotted pipes as per the necessity from ground level and fitted and fixed up in perfectly vertical position including cutting and threading pipe and slotted pipes and supplying and fixing all jointing materials tools and plant etc. complete and keeping the top of the casing pipe threaded including plugging tube wells to proven entry of foreign materials from above complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work , labour welfare cess@1% etc. complete as per the direction for the EIC. | |||
| 110 | 110 | 200 mm diameter : from 0 mtr. to 26 mtr. | 26 | mtr | |
| 111 | 111 | Supply of 200 mm (8") dia PVC pipe Schedule 80 as per ASTM-D-1785/04 [Weight : 12.434 Kg/mt ] and pipe fittings including testing as per specification complete including cost and conveyance & taxes of all materials and cost of all labour T&P required for the work,Labour welfare cess@1% etc. complete as per the direction of the EIC. | 27 | mtr | |
| 112 | 112 | Cleaning and developing the tube well their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work , labour welfare cess@1% etc. complete as per the direction for the EIC. | 1 | No. | |
| 113 | 113 | Providing & Supply of 1.5 HP Submersible pump set with ISI approved make & model, Delivery: ? 50 mm, Total Head: 60 mt. & Discharge: 2 LPS including cost and conveyance & taxes of all materials and cost of all labour T&P required for the work,Labour welfare cess@1% etc. complete as per the direction of the EIC. | 1 | No. | |
| 114 | 114 | Providing & Supply of 50 mm dia HDPE Column pipe with screwed & socketed type as per IS 4984 - 1995 & Pressure rating PN6.00 including cost and conveyance & taxes of all materials and cost of all labour T&P required for the work,Labour welfare cess@1% etc. complete as per the direction of the EIC. | 33 | mtr | |
| 115 | 115 | Providing & Supply of 2.5 sq. mm three core flat type submersible Electic cable including cost and conveyance & taxes of all materials and cost of all labour T&P required for the work,Labour welfare cess@1% etc. complete as per the direction of the EIC. | 43 | mtr | |
| 116 | 116 | Providing & Supply of Electrical control pannel with switch gear, DOL starter, voltmeter, ampmeter, phase indicator, HRC fuse etc including cost and conveyance& taxes of all materials and cost of all labour T&P required for the work,Labour welfare cess@1% etc. complete as per the direction of the EIC. | 1 | No. | |
| 117 | 117 | Providing and fixing M.S. clamp/Bore Cap of required dia to the top of casing/housing pipe of tube well as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 150 mm clamp. including cost and conveyance & taxes of all materials and cost of all labour T&P required for the work,Labour welfare cess@1% etc. complete as per the direction of the EIC. | 1 | No. | |
| 118 | 118 | Providing and fixing of PVC Rope (12mm dia) including cost and conveyance & taxes of all materials and cost of all labour T&P required for the work,Labour welfare cess@1% etc. complete as per the direction of the EIC. | 36 | mtr | |
| 119 | 119 | Supplying all materials, labour, T&P for fitting and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting up to a height of 5 metres above ground level and placing the tank to the required position on staging complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC. | 1 | No. | |
| 120 | 120 | Cost and conveyance of Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS: 12701-1996 icomplete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC. | 5000 | Ltres | |
| 121 | 121 | Providing fitting, fixing of 160 mm dia rain water pipe of Schedule 40 [4 kg PSI] including fitted, fixed & mending to the holes provided at discharge point with necessary bends, shoes etc complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. | 40 | mtr | |
| 122 | 122 | Internal PH & Sanitary works | |||
| 123 | 123 | GROUND FLOOR | |||
| 124 | 124 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refiling of trenches, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge | |||
| 125 | 125 | 110mm U-PVC SWR Pipe(Ori Plast/Finolex/Supreme/ Make Type-B) | 12 | mtr | |
| 126 | 126 | 110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make) | 4 | No. | |
| 127 | 127 | 110mm U-PVC door bend (Ori Plast/Finolex/Supreme Make) | 4 | No. | |
| 128 | 128 | 110mm U-PVC Plain bend (Ori Plast/Finolex/Supreme Make) | 2 | No. | |
| 129 | 129 | 110mm U-PVC Cowl (Ori Plast/Finolex/Supreme Make) | 4 | No. | |
| 130 | 130 | 110mm U-PVC HR bend(Ori Plast/Finolex/Supreme Make) | 2 | No. | |
| 131 | 131 | 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) | 2 | No. | |
| 132 | 132 | 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) | 6 | No. | |
| 133 | 133 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/VC pipes, class-IV (10 kg F/cm) on filming I.S. 4985 of the following nominal bore, tube and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge. | |||
| 134 | 134 | 15 mm dia PVC ASTM pipe (sch-80) | 20 | mtr | |
| 135 | 135 | 25 mm dia PVC ASTM pipe (sch-80) | 32 | mtr | |
| 136 | 136 | 40 mm dia PVC ASTM pipe (sch-80) | 12 | mtr | |
| 137 | 137 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge | |||
| 138 | 138 | 15 mm dia CP bib cock ( Plaza Make) | 8 | No. | |
| 139 | 139 | 15 mm CP Extension piece | 8 | No. | |
| 140 | 140 | 125 mm CP grating | 4 | No. | |
| 141 | 141 | 15 mm size C.P. flange | 8 | No. | |
| 142 | 142 | Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4 cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mmx 30mm footrest, fixing 100mm dia HCL ‘p’ or ‘s’ trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages, cost & conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. [580mm size Orissa pan (Hindwrare/Parryware/Neycer make)] | 4 | No. | |
| 143 | 143 | Supplying all materials, labour T&P and fixing 12.50 litres/10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/PVC ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia PVC inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. [10 ltr. Capacity PVC low level Cistern with 32mm dia CP long flush bend (Slimline-white-Parryware make)] | 4 | No. | |
| 144 | 144 | Suppying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32,, nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstain head screw down high pressure lettered “Hot” and “Cold” with long screws, shanks and back nits of 15mm dia nominal bore, fixing with long screws, shanks and back nuts of 15mm dia nominal bore,fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all cost & conveyance of all materials to worksite, payment of taxes etc all complete as per P.H specification and direction of the Engineer-in-charge. [550mmx400mm W.H basin(Hindware/Parryware/Neycer make) with 15mm dia C.P pillar cock (Plaza make)] | 4 | No. | |
| 145 | 145 | Supplying all materials, labor, T&P and fixing Bowl pattern Gents Urinal with CP screws including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. fixing PVC waste pipe of 32mm nominal diameter for Urinal including brass check nut complete , fixing Angle Valve fixing 15 mm dia PVC inlet connection pipe and making connection with Angle Valve and supply mains for Urinal , fixing 32mm dia CP brass waste, etc. all complete as per the specification and direction of the Engineer in charge. Bowl pattern Urinal [Parryware make] | 6 | No. | |
| 146 | 146 | Supplying all materials, labor, T&P and fixing Squatting type Ladies Urinals including fixing 15 mm dia PVC inlet connection pipe and making connection with Angle Valve and supply mains for Urinal etc. all complete as per the specification and direction of the Engineer in charge. 355x600 mm size [Parryware make] | 2 | No. | |
| 147 | 147 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer-in-charge. [25 mm x 600 mm long CP Towel Rail.] | 4 | No. | |
| 148 | 148 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer-in-charge.[600 mm x 125 mm plate glass shelf] | 4 | No. | |
| 149 | 149 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer-in-charge. [600 mm x 450mm size B.E Mirror] | 4 | No. | |
| 150 | 150 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer-in-charge. [CP soap holder] | 4 | No. | |
| 151 | 151 | Supplying all materials labour T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer-in-charge. [½” x 5” CP shower] | 2 | No. | |
| 152 | 152 | Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc all complete as per P.H specification and direction of Engineer-in-charge | 2 | No. | |
| 153 | 153 | Supplying all materials, labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H specification and direction of Engineer-in-charge | 2 | No. | |
| 154 | 154 | Providing and fixing 25 mm diameter Gate Valve complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC. | 1 | No. | |
| 155 | 155 | FIRST FLOOR, TOP ROOM & PARAPET | |||
| 156 | 156 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refiling of trenches, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge | |||
| 157 | 157 | 110mm U-PVC SWR Pipe(Ori Plast/Finolex/Supreme/ Make Type-B) | 3 | mtr | |
| 158 | 158 | 110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make) | 1 | No. | |
| 159 | 159 | 110mm U-PVC door bend (Ori Plast/Finolex/Supreme Make) | 2 | No. | |
| 160 | 160 | 110mm U-PVC Plain bend (Ori Plast/Finolex/Supreme Make) | 2 | No. | |
| 161 | 161 | 110mm U-PVC Cowl (Ori Plast/Finolex/Supreme Make) | 3 | No. | |
| 162 | 162 | 110mm U-PVC HR bend(Ori Plast/Finolex/Supreme Make) | 2 | No. | |
| 163 | 163 | 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) | 2 | No. | |
| 164 | 164 | 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) | 6 | No. | |
| 165 | 165 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/VC pipes, class-IV (10 kg F/cm) on filming I.S. 4985 of the following nominal bore, tube and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge. | |||
| 166 | 166 | 15 mm dia PVC ASTM pipe (sch-80) | 10 | mtr | |
| 167 | 167 | 25 mm dia PVC ASTM pipe (sch-80) | 10 | mtr | |
| 168 | 168 | 40 mm dia PVC ASTM pipe (sch-80) | 5 | mtr | |
| 169 | 169 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge | |||
| 170 | 170 | 15 mm dia CP bib cock ( Plaza Make) | 3 | No. | |
| 171 | 171 | 15 mm CP Extension piece | 2 | No. | |
| 172 | 172 | 125 mm CP grating | 2 | No. | |
| 173 | 173 | 15 mm size C.P. flange | 3 | No. | |
| 174 | 174 | Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar(1:4) for taking G.I Pipes and fittings/P.V.C pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per direction of Engineer-in-charge. | 10 | No. | |
| 175 | 175 | Supplying all materials, labour, T&P and cutting holes in RCC floors and roofs up to 19cm for passing P.V.C pipes and G.I fittings etc. and repairing the holes after insertion of pipe etc. with cement concrete(1:2:4) including finishing complete so as to make it leak proof as per P.H specification and direction of Engineer-In-charge. | 4 | No. | |
| 176 | 176 | Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4 cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mmx 30mm footrest, fixing 100mm dia HCL ‘p’ or ‘s’ trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages, cost & conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. [580mm size Orissa pan (Hindwrare/Parryware/Neycer make)] | 1 | No. | |
| 177 | 177 | Providing and fixing 25 mm diameter Gate Valve complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC. | 1 | No. | |
| 178 | 178 | Supplying all materials, labour T&P and fixing 12.50 litres/10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/PVC ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia PVC inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. [10 ltr. Capacity PVC low level Cistern with 32mm dia CP long flush bend (Slimline-white-Parryware make)] | 1 | No. | |
| 179 | 179 | Suppying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32,, nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstain head screw down high pressure lettered “Hot” and “Cold” with long screws, shanks and back nits of 15mm dia nominal bore, fixing with long screws, shanks and back nuts of 15mm dia nominal bore,fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all cost & conveyance of all materials to worksite, payment of taxes etc all complete as per P.H specification and direction of the Engineer-in-charge. [550mmx400mm W.H basin(Hindware/Parryware/Neycer make) with 15mm dia C.P pillar cock (Plaza make)] | 2 | No. | |
| 180 | 180 | Supplying all materials, labor, T&P and fixing Bowl pattern Gents Urinal with CP screws including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. fixing PVC waste pipe of 32mm nominal diameter for Urinal including brass check nut complete , fixing Angle Valve fixing 15 mm dia PVC inlet connection pipe and making connection with Angle Valve and supply mains for Urinal , fixing 32mm dia CP brass waste, etc. all complete as per the specification and direction of the Engineer in charge. Bowl pattern Urinal [Parryware make] | 2 | No. | |
| 181 | 181 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer-in-charge. [25 mm x 600 mm long CP Towel Rail.] | 2 | No. | |
| 182 | 182 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer-in-charge.[600 mm x 125 mm plate glass shelf] | 1 | No. | |
| 183 | 183 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer-in-charge. [600 mm x 450mm size B.E Mirror] | 1 | No. | |
| 184 | 184 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer-in-charge. [CP soap holder] | 1 | No. | |
| 185 | 185 | Supplying all materials labour T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer-in-charge. [½” x 5” CP shower] | 1 | No. | |
| 186 | 186 | Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc all complete as per P.H specification and direction of Engineer-in-charge | 2 | No. | |
| 187 | 187 | Supplying all materials, labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H specification and direction of Engineer-in-charge | 2 | No. | |
| 188 | 188 | Internal Electrification Work | |||
| 189 | 189 | GROUND FLOOR | |||
| 190 | 190 | Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard ) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. [Group-C] | 58 | No. | |
| 191 | 191 | Providing, Supplying and fixing of metal box of 150 mm x 75 mm x 60 mm (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 5 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc as required. (For light plugs to be used in non residential buildings) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. | 14 | No. | |
| 192 | 192 | Recessed wiring to submain in 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick alongwith 1 x1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire Finolex/ L&T/Anchor /Havels /V Guard) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. | 136.5 | mtr | |
| 193 | 193 | Recessed wiring to submain in 2 x 6 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 25 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire Finolex /L&T /Anchor /Havels /V Guard) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. | 81.9 | mtr | |
| 194 | 194 | Providing & Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/L&T/Anchor/Havels/V Guard) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. | 54.6 | mtr | |
| 195 | 195 | Supply and fixing of single pole MCB with sheet steel enclosure, distribution board, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphate and powder painted including earthing etc. as required ( But with out MCB/ RCCB/ ISOLATOR) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. | 2 | No. | |
| 196 | 196 | Providing, Supplying and fixing of metal box of 180 mm x 100 mm x 60 mm (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 5 pin 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc as required. (For light plugs to be used in non residential buildings) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. | 9 | No. | |
| 197 | 197 | Providing & Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. | 1 | No. | |
| 198 | 198 | Supplying and fixing batten holder / BK angle holder ISI marked including connection etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. | 39 | No. | |
| 199 | 199 | Supply and fixing of 5 amp to 32 amp rating 240 V "B" series miniature circuit breaker suitable for lighting and other loads of the following poles in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. | 2 | No. | |
| 200 | 200 | Supply, Installation, Testing, and Commissioning of 32 Amp DP Main switches of following capacity (IS 13940 Part 3/1993 ) on existing surface / wall mountnting and complete with HRC Fuse links, interconnections, earthing, etc. complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. Make- SEIMENS /HPL /ANCHOR /L&T /HAVELS /C & S/ RK | 1 | No. | |
| 201 | 201 | Supply, Installation, Testing and Commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. | 15 | No. | |
| 202 | 202 | Supply, Installation, Testing and Commissioning of resistance type ceiling fan regulator, in existing switch box including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor, earthing the regulator as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. | 15 | No. | |
| 203 | 203 | Installation, testing and commissioning of exhaust fan 300 mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. | 4 | No. | |
| 204 | 204 | Supply, Installation, Testing, and Commissioning of 100 Amp TPN Main switches of following capacity (IS 13940 Part 3/1993 ) on existing surface / wall mountnting and complete with HRC Fuse links, interconnections, earthing, etc. complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. Make- SEIMENS/ HPL/ ANCHOR /L&T /HAVELS /C & S / RK | 1 | No. | |
| 205 | 205 | Recessed wiring to submain in 2 x 10 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 25 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 4 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex /L&T /Anchor /Havels /V Guard) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. | 50 | mtr | |
| 206 | 206 | Laying and fixing of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm direct in ground in the same trench in one tier horizontal formation including excavation , filling the trench etc. as required but excluding and cushioning , protective covering complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. | 20 | mtr | |
| 207 | 207 | Supplying and fixing LED Bulb ISI marked including connection etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. | |||
| 208 | 208 | 9 Watt LED Bulb | 12 | No. | |
| 209 | 209 | 15 Watt LED Bulb | 11 | No. | |
| 210 | 210 | 23 Watt LED Bulb | 13 | No. | |
| 211 | 211 | 50 Watt LED Bulb | 1 | No. | |
| 212 | 212 | 63 Watt LED Bulb | 2 | No. | |
| 213 | 213 | FIRST FLOOR, TOP ROOM & PARAPET | |||
| 214 | 214 | Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard ) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. [Group-C] | 43 | No. | |
| 215 | 215 | Providing, Supplying and fixing of metal box of 150 mm x 75 mm x 60 mm (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 5 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc as required. (For light plugs to be used in non residential buildings) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. | 13 | No. | |
| 216 | 216 | Recessed wiring to submain in 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick alongwith 1 x1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire Finolex/ L&T/Anchor /Havels /V Guard) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. | 94.5 | mtr | |
| 217 | 217 | Recessed wiring to submain in 2 x 6 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 25 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire Finolex /L&T /Anchor /Havels /V Guard) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. | 56.7 | mtr | |
| 218 | 218 | Providing & Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/L&T/Anchor/Havels/V Guard) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. | 37.8 | mtr | |
| 219 | 219 | Supply and fixing of single pole MCB with sheet steel enclosure, distribution board, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphate and powder painted including earthing etc. as required ( But with out MCB/ RCCB/ ISOLATOR) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. | 2 | No. | |
| 220 | 220 | Providing, Supplying and fixing of metal box of 180 mm x 100 mm x 60 mm (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 5 pin 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc as required. (For light plugs to be used in non residential buildings) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. | 5 | No. | |
| 221 | 221 | Providing & Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. | 1 | No. | |
| 222 | 222 | Supplying and fixing batten holder / BK angle holder ISI marked including connection etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. | 27 | No. | |
| 223 | 223 | Supply and fixing of 5 amp to 32 amp rating 240 V "B" series miniature circuit breaker suitable for lighting and other loads of the following poles in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. | 2 | No. | |
| 224 | 224 | Supply, Installation, Testing, and Commissioning of 32 Amp DP Main switches of following capacity (IS 13940 Part 3/1993 ) on existing surface / wall mountnting and complete with HRC Fuse links, interconnections, earthing, etc. complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. Make- SEIMENS /HPL /ANCHOR /L&T /HAVELS /C & S/ RK | 1 | No. | |
| 225 | 225 | Supply, Installation, Testing and Commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. | 11 | No. | |
| 226 | 226 | Supply, Installation, Testing and Commissioning of resistance type ceiling fan regulator, in existing switch box including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor, earthing the regulator as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. | 11 | No. | |
| 227 | 227 | Installation, testing and commissioning of exhaust fan up to 450 mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. | 4 | No. | |
| 228 | 228 | Installation, testing and commissioning of exhaust fan 300 mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. | 1 | No. | |
| 229 | 229 | Recessed wiring to submain in 2 x 10 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 25 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 4 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex /L&T /Anchor /Havels /V Guard) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. | 20 | mtr | |
| 230 | 230 | Supplying and fixing LED Bulb ISI marked including connection etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. | |||
| 231 | 231 | 9 Watt LED Bulb | 5 | No. | |
| 232 | 232 | 15 Watt LED Bulb | 11 | No. | |
| 233 | 233 | 23 Watt LED Bulb | 11 | No. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
