Uttar Pradesh Projects Corporation Limited has published Balance Construction Work Of Skill Development Training Centre For S . C . Beneficiaries At Svpu A And T Meerut . . Submission Date for this Tender is 22-04-2021. Building Work Tenders in Meerut Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Name of Work: BALANCE CONSTRUCTION WORK OF SKILL DEVELOPMENT TRAINING CENTER FOR S.C. BENEFICIARIES AT S.V.P.U. A&T MEERUT. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Excavation in foundation in ordinary soil (Loam, clay or sand) including lift upto 1.50 M. and lead upto 30 M. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in charge upto a distance of 30 M. from the foundation trenches. (where machine can not move ) | BI01010001010000000000000515BI0100001112 | 0.85 | Cum |
| 2 | 2 | Filling BY CARTED earth in trenches, plinth, sides of foundation etc. inlayers not exceeding 20 cms in depth, consolidating each deposited layer by ramming and watering including lead upto 50m & lift upto 1.50m. | BI01010001010000000000000515BI0100001113 | 10.78 | Cum |
| 3 | 3 | Providing and laying Cement concrete 1:4:8 (1cement :4 coarse sand :8 graded stone ballast 40 mm. nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete, also including cost of formwork in foundation. | BI01010001010000000000000515BI0100001114 | 44.73 | Cum |
| 4 | 4 | Sand filling in plinth and under floor including supply of necessary quantity of sand from a distance not exceeding 8 Kms. from the site of work and including watering, dressing etc. labour and T&P etc. required for proper complition of the work. saplings of girth upto 30 cms. measured at a height of 1 M. above ground level and removal of rubbish upto a distance of 50 M. out side the periphery of area cleared. including cost of sand.\n | BI01010001010000000000000515BI0100001115 | 92.86 | Cum |
| 5 | 5 | Providing and injecting chemical emulsion for preconstructional & postconstruction antitermite treatment and creating a chemical barrier under and around the coloumn pits, wall trenches, basement excavation, top surface of plinth, filling junction of wall and floor, along the external perimeter of binding, expansion joints, surrounding of pipes and conduits etc. complete. Plinth area of the building at ground floor only shall be measured as per I.S.6313 (Part II 1981). Aldrine emulsifiable concrete or any other approved material such as heptachlor or Chlorpyrifos or Chlordane will be used. The rate of application of chemical emulsion shall be as follows:-\n(1)Treatment for masonary & foundation 5 litres per sq.m.\n(2)Back fill in immediate contact with foundation 7.5 litre per sq.m (3)Treatment of top surface of plinth filling 5 liters per sq.m.(4)Treatment of soil along external parameter of building 5.0 lire per sqm. | BI01010001010000000000000515BI0100001116 | 559.86 | Sqm |
| 6 | 6 | R.C.C. work with cement, coarse sand and 2 cm Gauge stone Grit in the proportion of 1:1.5:3 (1 cement : 1.5 coarse sand : 3 stone ballast) in Lintel of door, window, ventilators, sunshade etc., including necessary centering and shuttering etc and also including supply of all materials, labour and T&P etc. required for proper completion of the work. | BI01010001010000000000000515BI0100001117 | 0.53 | Sqm |
| 7 | 7 | R.C.C. work with cement, coarse sand and 2 cm Gauge stone Grit in the proportion of 1:1.5:3 (1 cement : 1.5 coarse sand : 3 stone ballast) in Slab., including necessary centering and shuttering etc and also including supply of all materials, labour and T&P etc. required for proper completion of the work. | BI01010001010000000000000515BI0100001118 | 4.5 | Cum |
| 8 | 8 | R.C.C. work with cement, coarse sand and 2 cm Gauge stone Grit in the proportion of 1:1.5:3 (1 cement : 1.5 coarse sand : 3 stone ballast) in Column., including necessary centering and shuttering etc and also including supply of all materials, labour and T&P etc. required for proper completion of the work. | BI01010001010000000000000515BI0100001119 | 1.94 | Cum |
| 9 | 9 | Ist Class brick work in 1:4 cement and Coarse sand mortar in Foundation including supply of all materials, labour tools and plants, etc. Required for proper completetion of the work | BI01010001010000000000000515BI0100001120 | 1.26 | Cum |
| 10 | 10 | Ist Class HALF brick work in 1:3 cement and Coarse sand mortar in SUPER STRUCTURE for 115 mm thick wall including supply of all materials, labour tools and plants, etc. required for proper completetion of the work. | BI01010001010000000000000515BI0100001121 | 12.9 | Cum |
| 11 | 11 | Thermo-Mechanically Treated bars of grade Fe-500D or more work such as in reinforced concreted or reinforced brick work (when not included in overall rates) wrought to required shape as necessary including straightening, cutting, bending, placing in position and binding all complete for proper completion of the work and including supply of steel its wastage. | BI01010001010000000000000515BI0100001122 | 5 | Qtl |
| 12 | 12 | 15 mm thick plaster with cement mortar in consisting of 1:4 cement and approved coarse sand of minimum thickness not be less than 10 mm including supply of all materials, labour T&P etc. required for proper completion of the work. On plinth. | BI01010001010000000000000515BI0100001123 | 92.68 | Sqm |
| 13 | 13 | 12 mm thick plaster with cement mortar in consisting of 1:6 cement and Fine sand of minimum thickness not be less than 10 mm including supply of all materials, labour T&P etc. required for proper completion of the work. On smooth surface of wall. (Outer side) | BI01010001010000000000000515BI0100001124 | 252.2 | Sqm |
| 14 | 14 | 12 mm thick plaster with cement mortar in consisting of 1:6 cement and approved Fine Sand of minimum thickness not be less than 10 mm including supply of all materials, labour T&P etc. required for proper completion of the work. On rough surface of wall. (Inner Side) | BI01010001010000000000000515BI0100001125 | 83.34 | Sqm |
| 15 | 15 | Making grooves 10 to 12 mm wide x 8 mm deep in plaster the all or in ceiling vertically of horizontally as required. | BI01010001010000000000000515BI0100001126 | 915.07 | rmt |
| 16 | 16 | Providing and laying Vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm | BI01010001010000000000000515BI0100001127 | 326.22 | Sqm |
| 17 | 17 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut Granite stone for kitchen platforms, vanity counters, window sills,facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. | BI01010001010000000000000515BI0100001128 | 26.31 | Sqm |
| 18 | 18 | S/Fixing of Kota stone flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick | BI01010001010000000000000515BI0100001129 | 155.64 | Sqm |
| 19 | 19 | S/Fixing of Kota stone 20 mm thick in skirting, dado on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the floor, including rubbing and polishing complete. | BI01010001010000000000000515BI0100001130 | 13.06 | Sqm |
| 20 | 20 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm in flooring, 300x450 mm on wall (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc, complete | BI01010001010000000000000515BI0100001131 | 217.2 | Sqm |
| 21 | 21 | P/Laying of Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement (25 mm thick floor). For Apron | BI01010001010000000000000515BI0100001132 | 103.57 | Sqm |
| 22 | 22 | S/Fixing of M.S. Iron door chaukhat using angle 40x40x5 mm as per design complete | BI01010001010000000000000515BI0100001133 | 66 | kg |
| 23 | 23 | S/Fixing of M.S. Iron Z-section window with 10 mm sq bar grill both way as per design complete | BI01010001010000000000000515BI0100001134 | 80 | kg |
| 24 | 24 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type,: 35 mm thick including Stainless Steel butt hinges with necessary screws | BI01010001010000000000000515BI0100001135 | ||
| 25 | 24.01 | (i) Single leaf | BI01010001010000000000000515BI0100001136 | 53.84 | sqm |
| 26 | 24.02 | (ii) Double leaf | BI01010001010000000000000515BI0100001137 | 6.89 | sqm |
| 27 | 25 | Providing and laying "brick coba" 12 mm thick laid with Ist class brick bat coba 7.50 cm thick with gap of 15 mm to each other, over 20 mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finfished smooth & top mashed false square 30 x 30 cm and side wall parapet shall be monotythic plaster wall upto 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including S/o all material, labour, T&P etc complete for proper completion of work. | BI01010001010000000000000515BI0100001138 | 186.57 | sqm |
| 28 | 26 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | BI01010001010000000000000515BI0100001139 | 2387.33 | sqm |
| 29 | 27 | Distempering with oil bound distemper in two coats of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N Shalimar, Asian Paints after thoroughly brushing the sufface free from mortar dropping and other forein matter and also including prepairing the surface even and sand papered smooth including cost of all material. | BI01010001010000000000000515BI0100001140 | 1641.84 | sqm |
| 30 | 28 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) (Apex Ultima, Weather coat All guard) Asian/ Berger. | BI01010001010000000000000515BI0100001141 | 745.5 | sqm |
| 31 | 29 | Providing and fixing bright /matt finished Stainless Steel Sliding Door Bolt of approved quality & make with necessary screws etc all complete. 250x16 mm. | BI01010001010000000000000515BI0100001142 | 28 | nos. |
| 32 | 30 | Providing and fixing SS tower bolts ISI marked anodised transparent or dyed to required colour or shade with necessary screws etc. complete : 200x10 mm. | BI01010001010000000000000515BI0100001143 | 28 | nos. |
| 33 | 31 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. | BI01010001010000000000000515BI0100001144 | 28 | nos. |
| 34 | 32 | Providing and fixing SS handles ISI marked anodised transparent or dyed to required colour or shade with necessary screws etc. complete :125 mm. | BI01010001010000000000000515BI0100001145 | 56 | nos. |
| 35 | 33 | Making Apron drain of size 230x150 mm | BI01010001010000000000000515BI0100001146 | 131.77 | rmt |
| 36 | 34 | Painting two coats over priming coat on steel & wooden surfaces up to 10 cm width or sq,mt in areas with superior synthetic enamel such as Luxol-3 Hi-gloss apcolite superlac, Dulux specified finishing to give an even shade & incl. cleaning the surface of all dirt, dust & other foreighn matter sand preparing and knotting incl. cost of all etc. required for proper completion of work. | BI01010001010000000000000515BI0100001147 | 284.06 | sqm |
| 37 | 35 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes. | BI01010001010000000000000515BI0100001148 | 72.69 | sqm |
| 38 | 36 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. | BI01010001010000000000000515BI0100001149 | 28.34 | Sqm |
| 39 | 37 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | BI01010001010000000000000515BI0100001150 | 196.56 | kg |
| 40 | 38 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).Ordinary cement without any pigment | BI01010001010000000000000515BI0100001151 | 12.96 | Sqm |
| 41 | 39 | P/Laying of 80 mm thick vibratory compacted C.C. Interlocking tiles including making Brick work edging 1:4 and base with 75 mm thick GSB layer and required edging including fine sand for blinding and cussion complete for proper completion of the work | BI01010001010000000000000515BI0100001152 | 190.78 | Sqm |
| 42 | 40 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. (a) White Vitreous china Orissa pattern W.C. pan of size 580x440 mm | BI01010001010000000000000515BI0100001153 | 6 | each |
| 43 | 41 | Same as above but for European type W.C. pan with white plastic seat and lid | BI01010001010000000000000515BI0100001154 | 2 | each |
| 44 | 42 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap. | BI01010001010000000000000515BI0100001155 | 6 | each |
| 45 | 43 | Providing and fixing Stainless Steel kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required. Kitchen sink with drain board of size 510x1040x200mm | BI01010001010000000000000515BI0100001156 | 1 | each |
| 46 | 44 | Providing and fixing flexible Semi rigid pipe P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. | BI01010001010000000000000515BI0100001157 | ||
| 47 | 44.01 | (a) 32 mm dia | BI01010001010000000000000515BI0100001158 | 6 | each |
| 48 | 44.02 | (b) 40mm dia | BI01010001010000000000000515BI0100001159 | 1 | each |
| 49 | 45 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | BI01010001010000000000000515BI0100001160 | 6 | each |
| 50 | 46 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required. (a) Two urinal basin with 5 litre white P.V.C. automatic flushing cistern | BI01010001010000000000000515BI0100001161 | 2 | each |
| 51 | 47 | Providing and fixing stone slab table rubbed, edges rounded and polished of size 75x50cm deep and 1.8cm thick fixed in Urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1cement: 2coarse sand: 4graded stone aggregate 6mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade | BI01010001010000000000000515BI0100001162 | 2 | Sqm |
| 52 | 48 | Providing and fixing 8 mm dia C.P./S.S. Jet with flexible tube upto 1 meter long with S.S. triangular plate for Eureopean type W.C. of quality and make as approved by engineer-in-charge. 15mm nominal bore | BI01010001010000000000000515BI0100001163 | 2 | each |
| 53 | 49 | Providing and fixing CP Brass Single lever lelephonic wall mixture of quality & make and as per thedirection of Enginer-in-charge. (a) 15mm dia nominal dia. | BI01010001010000000000000515BI0100001164 | 4 | each |
| 54 | 50 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet. (a) 100 mm diameter | BI01010001010000000000000515BI0100001165 | 4 | each |
| 55 | 51 | Providing & fixing PTMT towl rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fitting arrangement of approved quality and colour. 600 mm. long towl rail length of 645 mm. width 78 mm. and effective height of 88 mm, weighing not less than 190 gms. | BI01010001010000000000000515BI0100001166 | 4 | each |
| 56 | 52 | Providing and fixing PTMT Liquid soap container 109 mm wide ,125 mm high and 112 mm distance from wall of standerd shape with bracket of the same material with snap fittings of approved quality and colour weighing not less than 105 gms | BI01010001010000000000000515BI0100001167 | 6 | each |
| 57 | 53 | Providing & fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms. | BI01010001010000000000000515BI0100001168 | 4 | each |
| 58 | 54 | Providing and fixing Toilet paper holder a) C.P. brass | BI01010001010000000000000515BI0100001169 | 2 | each |
| 59 | 55 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A Single socketed pipes. a) 110mm diameter | BI01010001010000000000000515BI0100001170 | 50 | rmt |
| 60 | 56 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete. a) 110mm | BI01010001010000000000000515BI0100001171 | 12 | each |
| 61 | 57 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. a) 110mm | BI01010001010000000000000515BI0100001172 | 24 | each |
| 62 | 58 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. | BI01010001010000000000000515BI0100001173 | 12 | each |
| 63 | 59 | Supply and fixing of PVC S.W.R. pipe type-B confirming to IS-13592 including jointing the pipes with rubber ring, lubricant including supply of all marerial labour and T&P. Required for proper completion of work. | BI01010001010000000000000515BI0100001174 | ||
| 64 | 59.01 | (a) 100 mm dia | BI01010001010000000000000515BI0100001175 | 40 | rmt |
| 65 | 59.02 | (b) 75 mm dia | BI01010001010000000000000515BI0100001176 | 20 | rmt |
| 66 | 60 | Supply and fixing of PVC S.W.R. pipe nahni trap size 100x75, 110/90 mm self cleaning design fixed. | BI01010001010000000000000515BI0100001177 | 17 | each |
| 67 | 61 | Supply and fixing of PVC S.W.R. plain bend. | BI01010001010000000000000515BI0100001178 | ||
| 68 | 61.01 | (a) Size 75 mm | BI01010001010000000000000515BI0100001179 | 8 | each |
| 69 | 61.02 | (b) Size 100 mm | BI01010001010000000000000515BI0100001180 | 8 | each |
| 70 | 63 | Supply and fixing of PVC S.W.R. door bend. | BI01010001010000000000000515BI0100001181 | ||
| 71 | 63.01 | (a) Size 75 mm | BI01010001010000000000000515BI0100001182 | 4 | each |
| 72 | 63.02 | (b) Size 100 mm | BI01010001010000000000000515BI0100001183 | 8 | each |
| 73 | 64 | Supply and fixing of PVC S.W.R. plain tee. | BI01010001010000000000000515BI0100001184 | ||
| 74 | 64.01 | (a) Size 75x75x75 mm | BI01010001010000000000000515BI0100001185 | 4 | each |
| 75 | 64.02 | (b) Size 100x100x100 mm | BI01010001010000000000000515BI0100001186 | 6 | each |
| 76 | 65 | Providing & fixing G.I. pipes complete with G.I. fittings & clamps including cutting & making good the walls etc. Exposed on wall 25 mm dia nominal bore. | BI01010001010000000000000515BI0100001187 | 45 | rmt |
| 77 | 66 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Exposed on wall. | BI01010001010000000000000515BI0100001188 | ||
| 78 | 66.01 | (a) 20mm dia nominal outer dia pipes | BI01010001010000000000000515BI0100001189 | 30 | rmt |
| 79 | 66.02 | (b) 25mm dia nominal outer dia pipes | BI01010001010000000000000515BI0100001190 | 45 | rmt |
| 80 | 67 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc. | BI01010001010000000000000515BI0100001191 | ||
| 81 | 67.01 | (a) 20mm dia nominal outer dia pipes | BI01010001010000000000000515BI0100001192 | 45 | rmt |
| 82 | 67.02 | (b) 25mm dia nominal outer dia pipes | BI01010001010000000000000515BI0100001193 | 35 | rmt |
| 83 | 68 | Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions. 15mm nominal bore | BI01010001010000000000000515BI0100001194 | 6 | each |
| 84 | 69 | Providing & fixing CP brass bib cock of approved quality 15mm nominal bore | BI01010001010000000000000515BI0100001195 | 8 | each |
| 85 | 70 | Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15mm nominal bore | BI01010001010000000000000515BI0100001196 | 1 | each |
| 86 | 71 | Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931 15mm nominal bore | BI01010001010000000000000515BI0100001197 | 16 | each |
| 87 | 72 | Providing and fixing gun metal gate valve with wheel of approved quality. | BI01010001010000000000000515BI0100001198 | ||
| 88 | 72.01 | (a) 20 mm dia nominal bore | BI01010001010000000000000515BI0100001199 | 1 | each |
| 89 | 72.02 | (b) 25mm dia nominal bore | BI01010001010000000000000515BI0100001200 | 3 | each |
| 90 | 73 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25 mm nominal bore | BI01010001010000000000000515BI0100001201 | 1 | each |
| 91 | 74 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank. IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | BI01010001010000000000000515BI0100001202 | 4000 | ltr |
| 92 | 75 | Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m. Pipes, cables etc. exceeding 80mm dia. But not exceeding 300 mm dia. | BI01010001010000000000000515BI0100001203 | 65 | rmt |
| 93 | 76 | Providing, laying and joining PVC pipes including testing of joints etc. complete. | BI01010001010000000000000515BI0100001204 | ||
| 94 | 76.01 | (a) 100mm diameter | BI01010001010000000000000515BI0100001205 | 50 | rmt |
| 95 | 76.02 | (b) 150 mm diameter | BI01010001010000000000000515BI0100001206 | 15 | rmt |
| 96 | 77 | Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround PVC Pipes including bed concrete as per standard design. | BI01010001010000000000000515BI0100001207 | ||
| 97 | 77.01 | (a) 100mm diameter PVC Pipe | BI01010001010000000000000515BI0100001208 | 50 | rmt |
| 98 | 77.02 | (b) 150mm diameter PVC Pipe | BI01010001010000000000000515BI0100001209 | 15 | rmt |
| 99 | 78 | Providing and fixing square mouth S.W. Gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 Kg and frame to be not less than 2.70 Kg as per standard design 150 x 100 mm. size P type | BI01010001010000000000000515BI0100001210 | 3 | each |
| 100 | 79 | Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design nside size 90x80cms and 45cms deep including RCC Cover. | BI01010001010000000000000515BI0100001211 | 6 | each |
| 101 | 80 | Extra for depth of man hole size 90x80 cm | BI01010001010000000000000515BI0100001212 | 0.49 | rmt |
| 102 | 81 | Wiring point for light with 1.5 sq.mm FR P.V.C. insulated multistrand single core Copper Conductor cable in PVC conduit with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earthing wire drawn inside the conduit partly concealed in wall & partly laid in slab along with the reinforcement before concreting,complete with modular type switch & ceiling rose / angle / batten holder on 3 mm thick phenolic laminated backelite sheet etc complete in all respects as directed, including matching color wash | BI01010001010000000000000515BI0100001213 | 87 | each |
| 103 | 82 | Same as above but Wiring point for two ways light point | BI01010001010000000000000515BI0100001214 | 1 | each |
| 104 | 83 | Same as above but Wiring point for fan point | BI01010001010000000000000515BI0100001215 | 31 | each |
| 105 | 84 | Same as above but Wiring point for exhaust fan point | BI01010001010000000000000515BI0100001216 | 3 | each |
| 106 | 85 | Same as above but Wiring point for 5 Amp plug | BI01010001010000000000000515BI0100001217 | 55 | each |
| 107 | 86 | Supply fixing and concealing of 25mm dia.2mm thick PVC conduit pipe with ISI mark embossed and with PVC acessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin/ adhesive to make the complete piping rigid,plastering with cement sand mortar finished to level with matching colour including cost of material labour and T & P etc required for proper completion of the work as per directions and to the satisfaction of engineer in charge. ( T.V. /Telephone) | BI01010001010000000000000515BI0100001218 | 120 | rmt |
| 108 | 87 | Supply & wiring of submains with two number 2.5 sq.mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in 20mm dia heavy duty (2mm thick) PVC conduit with 1 Number 1.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand copper conductor cable as earth continuity wire drawn inside the conduit complete in all respect. | BI01010001010000000000000515BI0100001219 | 375 | rmt |
| 109 | 88 | Supply & wiring of submains with two number 4 sq.mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in 20mm dia heavy duty (2mm thick) PVC conduit with 1 Number 2.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand copper conductor cable as earth continuity wire drawn inside the conduit complete in all respect. | BI01010001010000000000000515BI0100001220 | 320 | rmt |
| 110 | 89 | Supply and wiring of submain with 4 number 10 sqmm . FRLSH PVC insulated 1100 V grade multistranded single core copper conductor cable in 32 mm dia heavy duty (2mm thick ) PVC conduit partly concealed in wall and partly laid in slab along with reinforcement befor concreting with two number 10 SWG copper earth contunity wire including colour wash etc. complete in all respects. | BI01010001010000000000000515BI0100001221 | 80 | rmt |
| 111 | 90 | Supply & fixing ofrecess/Surface/Pendent mounting round 12 to 15 watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/Reflector and driver set complete in all respects. | BI01010001010000000000000515BI0100001222 | 32 | each |
| 112 | 91 | Supply and Fixing of LED Tube Light with batten suitable for up to 1X22 watt LED tube light fitting complete including tube on surface complete in all respect. | BI01010001010000000000000515BI0100001223 | 40 | each |
| 113 | 92 | Supply and fixing of factory wired integral LED flood light fitting having diecast aluminium housing built with driver set suitable for 70 to 90 watt confirming to IP 65 protection complete in all respect. | BI01010001010000000000000515BI0100001224 | 4 | each |
| 114 | 93 | Supply of Ceiling Fan with motor of A.C. Permanent insulation capacitor volage 220/240 volts, 50 Hz, 1-ph A.C.the fan assemble should consists of down rod blades, shackle canopies etc and with double ball bearing system. 1200mm sweep | BI01010001010000000000000515BI0100001225 | 31 | each |
| 115 | 94 | Supply and burying safe earthing Electorde T-19 (Hot Dip Galvanized), Length 2000 mm, outer pipe 50mm, inner pipe 25, terminal Dia 12mm ,outer G.I.pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Gavanized up to 100 mircon filled with crystalline conducative mixture (CCM) having anti corrosive & conducative property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaning capacity along with 30 cm squre C.I. frame with hinged cover & masonry housing (from electode terminal to switch board | BI01010001010000000000000515BI0100001226 | 1 | each |
| 116 | 95 | Supplying & Laying of 25mmx3mm G.I. Strip from earth electrode in ground as required complete in all respects. | BI01010001010000000000000515BI0100001227 | 20 | rmt |
| 117 | 96 | Supply & fixing of two number 8 SWG G.I. wire for earthing purpose as required complete in all respects. | BI01010001010000000000000515BI0100001228 | 20 | rmt |
| 118 | 97 | Supply and fixing of 6 Amp to 32 Amp MCB(10KA) | BI01010001010000000000000515BI0100001229 | 39 | each |
| 119 | 98 | Supply and fixing of 63 Amp. 4 Pole Isolator | BI01010001010000000000000515BI0100001230 | 3 | each |
| 120 | 99 | Supply and fixing of surface/ flush mounting 6 way TPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer Incharge. | BI01010001010000000000000515BI0100001231 | 3 | each |
| 121 | 100 | Supply and fixing of single pole MCB blanking plate | BI01010001010000000000000515BI0100001232 | 15 | each |
| 122 | 101 | Supply and fixing of power plug with 20A/250 V flush type modular switch and 5 Pin 20 A/250 Volt flush type universal modular socket switch on concealed M.S. box including supply of all material, labour T & P etc required for proper completion of work. | BI01010001010000000000000515BI0100001233 | 15 | each |
| 123 | 102 | Erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. down rod 19 mm dia duly painted, complete in all respects. | BI01010001010000000000000515BI0100001234 | 31 | each |
| 124 | 103 | Erection and testing exhaust fan on the exhisting hole with suitable size of rag bolts nuts and washers etc. complete in all respects. | BI01010001010000000000000515BI0100001235 | 3 | each |
| 125 | 104 | Supply & fixing of 16 gauge M.S.drum duly painted including making hole in the wall for exhaust fan and finishing properly etc. complete as required. | BI01010001010000000000000515BI0100001236 | 3 | each |
| 126 | 105 | Supply & fixing hexagonal/Round G.P. Fan box of approved make made up of 1.0 mm thick ISI marked G.P. Sheet spot welded four to Eight holes of 25.4mm for pipe entry of the box. Holes should be semi-shuttered type with 0.5mm G.P. Sheet made upper & lower cover duly screwed fitted with 300mm round zink coated M.S. Bar x 12mm & brand name should be embossed. Fixing with wiring conduit laid in the R.C.C. roof before concreting alongwith supply of all material labour, T & P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001237 | 31 | each |
| 127 | 106 | Supply fixing of electronic fan regulator (Modular) 120-280 V. ISI marked, on the existing switch board including making connetion, required material, labour T/P etc for proper completion of work to the satisfaction of Engineer in charge of work. | BI01010001010000000000000515BI0100001238 | 31 | each |
| 128 | 107 | Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size. or as directed by the Engineer-Incharge, complete in all respect. the armouring of the cable shall be properly connected with the earth conductor by clamps etc. 35 sqmm 3.5 core | BI01010001010000000000000515BI0100001239 | 50 | rmt |
| 129 | 108 | Supply & fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-in-charge.35 sqmm 3.5 core | BI01010001010000000000000515BI0100001240 | 2 | each |
| 130 | 109 | Supplying and fixing of Palm / pin type copper tin plated cables sockets (lugs) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of Engineer-Incharge. 35 Sq.mm | BI01010001010000000000000515BI0100001241 | 8 | each |
| 131 | 110 | Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB’s Switches complete and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters (KVA, P.F, KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. Incoming : 200Amp. MCCB-1No., Outgoing : 63 Amp. MCCB- 3 No. | BI01010001010000000000000515BI0100001242 | 1 | each |
| 132 | 111 | Supply and fixing of danger board fabricated from 10 gauge M.S. sheet as per I.E.rules. | BI01010001010000000000000515BI0100001243 | 1 | each |
| 133 | 112 | Supply and laying of 1800mm x 900mm x 12mm thick chequered rubber matting of tested quality. | BI01010001010000000000000515BI0100001244 | 1 | each |
| 134 | 113 | Supplying and drawing following pair 0.5 sqmm FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/recessed steel/PVC conduit as required. 2 Pair | BI01010001010000000000000515BI0100001245 | 45 | rmt |
| 135 | 114 | Supplying and drawing co-axial TV cable RG-6 graded, 0.7 mm solid copper conductor PE insulated,shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. | BI01010001010000000000000515BI0100001246 | 25 | rmt |
| 136 | 115 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc as required. (a) Telephone socket outlet & TV antenna socket outlet | BI01010001010000000000000515BI0100001247 | 3 | each |
| 137 | 116 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.75mm X 75 mm X 60mm Deep | BI01010001010000000000000515BI0100001248 | 3 | each |
| 138 | 117 | Supplying and fixing following size/modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 1 or 2 Module (75mm X 75 mm) | BI01010001010000000000000515BI0100001249 | 3 | each |
| 139 | 118 | Extra for fixing the louvers / shutters complete with frame fro exhaust fans of all sizes. \n | BI01010001010000000000000515BI0100001250 | 3 | each |
| 140 | 119 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. | BI01010001010000000000000515BI0100001251 | 5 | each |
| 141 | 120 | Supply & erection of AC 230/250 Volts, 50 Hz exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required-Make: USHA, ORIENT, CROMPTON AND EQUALANT 300 mm sweep. | BI01010001010000000000000515BI0100001252 | 3 | each |
| 142 | 121 | Supply& fixing of batton holder with LED bulb 9 watt | BI01010001010000000000000515BI0100001253 | 15 | each |
| 143 | Total in Figures |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
