| 1 | 1 | Brick work with common burnt clay F.P.S.(Non Modular) bricks of class designation 7.5 in superstructure above plinth level upto floor five level in all shapes and sizes in : Cement mortar 1 : 6 (1 cement : 6 coarse sand)Add extra over item of brick work with class designation 10.0 in substitution of class designation 7.5 :Quantity in Cum. | | 3.588 | Cum. |
|---|
| 2 | 2 | Brick work with common burnt clay F.P.S.(Non Modular) bricks of class designation 7.5 in foundation and plinth with Cement mortar 1 : 6 (1 cement : 6 coarse sand)Add extra over item of brick work with class designation 10.0 in substitution of class designation 7.5 :Quantity in Cum. | | 18.2 | Cum. |
|---|
| 3 | 3 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. | | 240 | Sqm |
|---|
| 4 | 4 | roviding and Fixing Cushion Vinyl/Fully flexible Vinyl Flooring confirming to I.S.-3462 Flooring of approved make with fibre base using rubber base adhesives including rolling with light wooden roller complet2.0 mm thick. | | 36 | Sqm |
|---|
| 5 | 5 | Stone slab roofing on ground floor with fine grained stone slab from aproved quarry (Soorsagar, Jodhpur) including filling of joints of parapet and slab on both sides in cement sand mortar 1 :4 with top 15Cm. thick lime concrete (40:100) terracing (as per BIKANER PRACTICE) including sandla ralthal, hemp and methi well tapping finished smooth polished surface in all respects in lime surkhimortar 1 : 2 with nails and wire and lime batta (gola) 75 mm x 75 mm and sandla etc. complete finished for span :Above 2.0 m and Upto 2.50 metre. | | 32.5 | Sqm |
|---|
| 6 | 6 | Grading roof for water proofing treatment with water proffing compound Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | | 4.5 | Cum |
|---|
| 7 | 7 | Providing and fixing in position collapsible steel shutters with vertical M.S. Channels 20 x 10 x 2mm and bracket with flat iron diagonals 20 x 5mm. size with top and bottom rail of T-iron 40 x 40 x 6mm. with 40mm dia steel pulleys/ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer. (To be measured and paid as per outer dimension).With 75 mm opening when closed. | | 36.5854 | Sqm. |
|---|
| 8 | 8 | P & F kitchen & Lab Sink of approved make with C.I. brackets duly painted, 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up to floor level complete including cutting and making good the wall & floor :White glazed Fire clay kitchen sink: 600x450x200 mm | | 2 | Each |
|---|
| 9 | 9 | Providing and fixing external grade board solid core single/ Double leaf flush door shutters IS: 2202(Part-II)1996 marked using Phenol formal dehyderesin in glue both sides with approved stainless steel fittings complete as per annexure 'A' :30 mm thick .Commercial Veneer both side | | 15.6 | Sqm |
|---|
| 10 | 10 | Providing and fixing in cement sand mortar 1 : 4 single paitam (rebated) stone doors windows and ventilator frames of approved quarry :Size 100 x 60mm | | 36 | Mtr. |
|---|
| 11 | 11 | P & F G.I. Pipes with G.I. fittings (IS:1239 Mark) & M.S. clamps including cutting and making good the walls and floors :-\n( Internal work ) Medium Duty Pipes Internal work Exposed on wall 15 mm dia nominal bore | | 50 | Mtr. |
|---|
| 12 | 12 | 20mm dia nominal bore | | 50 | Mtr. |
|---|
| 13 | 13 | 25mm dia nominal bore | | 50 | Mtr. |
|---|
| 14 | 14 | P & F G.I. Pipes with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc. :-\n( External Work ) Medium Duty Pipes65mm dia nominal bore | | 150 | Mtr. |
|---|
| 15 | 15 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead :\nWith cement mortar 1 :4 ( 1 cement : 4 coarse sand) | | 5000 | Sqm |
|---|
| 16 | 16 | White washing with lime to give an even shade including all scaffolding: New work (three or more coats) | | 2000 | Sqm |
|---|
| 17 | 17 | Lettering with black Japan paint of approved brand and manufacture. | | 600 | P. Letter\nPer cm. height |
|---|
| 18 | 18 | Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately). For fixed portion Polyester Powder coating aluminum ( minimum thickness of powder coating 50 micron) | | 200 | Kg |
|---|
| 19 | 19 | For shutters builtup standard tubular sections of openable doors , windows & ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required (lockes shall be paid for separately). Polyester Powder coating aluminum ( minimum thickness of powder coating 50 micron) | | 200 | Kg |
|---|
| 20 | 20 | Providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness ( weight not less than 13.50 kg/sqm) | | 15 | Sqm |
|---|
| 21 | 21 | Providing and fixing 12 mm thick prelaminated three layer medium density (exterior grade ) particle board Grade I, Type II conforming to IS : 12823 bonded formaldehyde synthetic resin ,of approved brand and manufacture in paneling fixed in aluminium doors ,windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and direction of engineer-in-charge. Prelaminated particle board with decorative lamination on both sides. | | 15 | Sqm |
|---|
| 22 | 22 | Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. Complete as per direction of Engineer-in-charge Polyester powder coated minimum thickness 50 micron aluminium . | | 10 | Each |
|---|
| 23 | 23 | Providing and fixing expanded grill made of aluminum as per design and drawing having members section of size 7.5mm x 6.0mm and opening of size 102mm x 99mm to aluminum window/vent with required screws, Y and H aluminium sec (as per drawing) at the ends and middle joints respectively complete in all respect as per direction of engineer in charge. Polyester Powder coating aluminum ( minimum thickness of powder coating 50 micron) | | 15 | Sqm |
|---|
| 24 | 24 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. With stainless steel cover plate | | 4 | Each |
|---|
| 25 | 25 | Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. | | 2 | Each |
|---|
| 26 | 26 | P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete :Brass wt.400 gm,15mm. | | 160 | Each |
|---|
