Supply Installation Testing And Commissioning Of Complete Sprinkler Irrigation Equipment Including Hdpe Pipe Lldpe Network For Saffron Crop Cultivated Area At Bore Well No 52 94 105 And 110A Under Implementation Of National Mission On Saffron, Pulwama , Budgam-Jammu And Kashmir

Supply, Installation, Testing And Commissioning Of Complete Sprinkler Irrigation Equipment Including Hdpe Pipe / Lldpe Network For Saffron Crop Cultivated Area At Bore Well No. 52, 94, 105 & 110-A Under Implementation Of National Mission On Saffron.- 2 2 Bore Well No. 52 ( Command Area: 20.16 Ha ) Parigam Pulwama Nbore Well No. 105 ( Command Area: 16.80 Ha ) Chadoora Budgam Nbore Well No. 110A ( Command Area: 16.80 Ha ) Parigam Pulwama 3 3 Earth Work Excavation In Trenches ( Manual Excavation ) Upto Minimum Depth Of 2 Feet Underground With Adequate Width Which May Range From 12 For Straight Alignment Of Pipes To Be Laid Under Ground To 18 At Joining Spots For Laying Of Hdpe Pipeline Main And Sub-Main Of Size 75Mm. The Job Includes Refilling Of The Excavated Soil After Laying Of Pipe Line And Its Ramming. The Trench Work Is To Be Executed Strictly As Per The Layout Drawings Approved By The Department. 2160 Cum 4 4 Supply, Installation, Testing, And Commissioning Of Hdpe Pipes As Size 75Mm Dia Pn-8 Main / Sub-Main Pipe Lines And Risers For Control Valves / Flush Valves ( Pipe Size 75Mm Dia Pn-8 ) Inside The Excavated Trenches . The Job Includes Welding Of Pipe Joints Through Hot Plate Welding. Technical Specification As Per Annexure 16018 M 5 5 Supply, Installation, Testing, And Commissioning Of Hdpe Elbows Of Size 75Mm Dia ( Pn-10 ) . The Job Includes Welding Of Elbows Through Hot Plate Welding With The Hdpe Main / Sub-Main Pipe / Hdpe Risers And Other Requisite Spots As Per Layout Drawing Approved By The Department. Technical Specification As Per Annexure 710 Job 6 6 Supply, Installation, Testing, And Commissioning Of Hdpe Tees Of Size 75Mm Dia ( Pn-10 ) . The Job Includes Welding Of Tees Through Hot Plate Welding With The Hdpe Main / Sub-Main Pipe / Hdpe Risers And Other Requisite Spots As Per Layout Drawing Approved By The Department. Ntechnical Specification As Per Annexure 335 Job 7 7 Supply, Installation, Testing, And Commissioning Of Hdpe Service Saddle Of Size 75Mm X 32Mm ( Pn-10 ) . The Job Includes Fitting Of The Service Saddle On Hdpe Main Pipe ( Wherever Arvs Are To Be Installed ) And On Sub-Main Pipes At Requisite Spots As Per Layout Drawing Approved By The Department. Technical Specification As Per Annexure 930 Job 8 8 Supply, Installation, Testing, And Commissioning Of Male Threaded Adaptors ( Mtas Of 32Mm Size ) . The Job Includes Fitting Of Mtas On Hdpe Main Pipe ( Wherever Arvs Are To Be Installed ) And On Sub-Main Pipes At Requisite Spots As Per Layout Drawing Approved By The Department. Technical Specification As Per Annexure 930 Job 9 9 Supply, Installation, Testing, And Commissioning Of Lldpe Pipe As Lateral Lines And Risers ( Nominal Dia 32Mm ) Grade-Ii ( Pn-2.5 ) . The Job Including Cutting Of Lldpe Pipe Of Requisite Lengths ( For Risers And Lateral Pipe Lines ) . The Job Also Includes Punching Of Lldpe Pipes Used As Laterals At Requisite Spots As Per Layout Drawing Approved By The Department. Technical Specification As Per Annexure 47834 M 10 10 Supply, Installation, Testing, And Commissioning Of Compression Tee ( 32Mm With All Side Compression Ring ) . Technical Specification As Per Annexure 935 Job 11 11 Supply, Installation, Testing, And Commissioning Of Compression End Caps Pe 32Mm. Technical Specification As Per Annexure 1880 Job 12 12 Supply, Installation, Testing, And Commissioning Of Compression Bends Pe 32Mm. Technical Specification As Per Annexure 95 Job 13 13 Supply, Installation, Testing, And Commissioning Of Compression Joiner Pe 32Mm. Technical Specification As Per Annexure 65 Job 14 14 Supply, Installation, Testing, And Commissioning Of Rotating Head Mini Sprinkler ( Full Circle ) Including Ms Riser, Vinyl Tubings, Stake Assembly For Sprinkler And Connecting The Said Pipe Tubes To The Lldpe Lateral Pipes Lines At Requisite Spots. 5160 Job 15 15 Supply, Installation, Testing, And Commissioning Of Rotating Head Mini Sprinkler ( Half Circle ) Including Ms Riser, Vinyl Tubings, Stake Assembly For Sprinkler And Connecting The Said Pipe Tubes To The Lldpe Lateral Pipes Lines At Requisite Spots. 530 Job 16 16 Supply, Installation, Testing, And Commissioning Of 65 Mm Dia Control Valves For Hdpe Pipe As Sectional And Isolation Valves. The Control Valves Are To Be Installed As Per The Layout Drawing And Site Requirement. 182 Job 17 17 Supply, Installation, Testing, And Commissioning Of Hdpe Tail Piece Pn-8 ( Dia Suitable For Hdpe Pipe Size Installed ) . Technical Specification As Per Annexure 364 Job 18 18 Supply, Installation, Testing, And Commissioning Of Hdpe Plain Flange Pn-8 ( Dia Suitable For Hdpe Pipe Size Installed ) . Technical Specification As Per Annexure 364 Job 19 19 Supply, Installation, Testing, And Commissioning Of Rubber / Caf Washers. ( Dia Suitable For Hdpe Pipe Size Installed ) 364 Job 20 20 Supply, Installation, Testing, And Commissioning Of Nut Bolt And Washer Of Suitable Size. 300 Kgs 21 21 Supply, Installation, Testing, And Commissioning Pvc Air Release Valves 25Mm Size Double Acting Male Threaded With Complete Assembly. 30 Job 22 22 Supply, Installation, Testing, And Commissioning Of Flush Valves / Compression Mta Suitable For Hdpe With Threaded End Cap ( 75Mm ) . 180 Job 23 23 Supply, Installation, Testing, And Commissioning Of Sand Filter Of Capacity 20 M3 / Hr With Back Wash Assembly Including Filling Of Filter Media ( Crushed Silica Sand Of Particle Size 0.7 To 1.2 Mm With 98.8% Purity ) And Should Be Made Of High Quality Pretreated Epoxy Polyester Powder Coated Steel Tank. 3 Job 24 24 Supply, Installation, Testing, And Commissioning Of Hydro Cyclone Filter Of Capacity 20 M3 / Hr , Mild Steel Contruction Powder Coated With 70-80 Micron Thick Colored Pure Polyester From Both Inside And Outside Surface For Protection Against Corrosion And Weather Effects. Hydrodynamically Designed To Create Centrifugal Action To Seperate Particles Heavier Than Water To Remove Fine Sand And Silt Particles Of Higher Size Than 75 Micron. 3 Job 25 25 Supply, Installation, Testing, And Commissioning Of Screen Filter Of Capacity 20 M3 / Hr, Epoxy Coated Metal Of Higher Engineering Plastic In Cylindrical Shape Equipped With Interchangeable Perforated Filtering Elements Working At A Pressure Of Pn-10 With Degree Of Filteration 60-200 Mesh ( 75 Microns ) 3 Job 26 26 Supply, Installation, Testing, And Commissioning Of Fertilizer Tank Of Capacity 90 Liters With Fertilizer Venturi Injectors, Coated With More Than 70 Micron Thick Colour Epoxy Powder From Both Inside And Outside Surface For Protection Against Corrosion And Weather Effects, Innovative Turbulent Inlet Ensuring Through Mixing Of Chemicals / Fertilizers , Special Drain Port To Flush The Tank, Wide 8 Opening For Easy Pouring Of Stock Solutions, High Pressure Hose Assembly ( Inlet / Outlet Connections ) And Having Working Pressure Not Less Than 2Kg / Cm2 3 Job 27 27 Supply, Installation, Testing, And Commissioning Of Pressure Release Valve ( Of Reputed Make ) As Per Site Requirement. 3 Job 28 28 Providing And Laying Of Gi Sleeve, 150 Mm Class C, Flanged / Welded For Envisaged Road Cuts / Exposed Main As Per Site Requirement. However, The Roadcut Is Not In The Scope 30 M 29 29 Dismantling Of The Complete Above Ground Network Including Lldpe Pipe, Fittings, Sprinklers, Etc After Testing Of The System And Shifting Of Same To The Premises Of Care Taker Where The Material Shall Be Properly Stacked As Per The Instructions Of Engineer In-Charge 1 3 Job 30 30 Bore Well No. 94 ( Command Area: 26.88 Ha ) Site: Parigam : Pulwama 31 31 Earth Work Excavation In Trenches ( Manual Excavation ) Upto Minimum Depth Of 2 Feet Underground With ( In All Kinds Of Soil ) Adequate Width Which May Range From 12 For Straight Alignment Of Pipes To Be Laid Under Ground To 18 At Joining Spots For Laying Of Hdpe Pipeline Main And Sub-Main Of Size 90 Mm. The Job Includes Refilling Of The Excavated Soil After Laying Of Pipe Line And Its Ramming. The Trench Work Is To Be Executed Strictly As Per The Layout Drawings Approved By The Department. 1302 Cum 32 32 Supply, Installation, Testing, And Commissioning Of Hdpe Pipes As Size 90Mm Dia Pn-8 Main / Sub-Main Pipe Lines And Risers For Control Valves / Flush Valves ( Pipe Size 90 Mm Dia Pn-8 ) Inside The Excavated Trenches . The Job Includes Welding Of Pipe Joints Through Hot Plate Welding. Technical Specification As Per Annexure 8178 M 33 33 Supply, Installation, Testing, And Commissioning Of Hdpe Elbows Of Size 90 Mm Dia ( Pn-10 ) . The Job Includes Welding Of Elbows Through Hot Plate Welding With The Hdpe Main / Sub-Main Pipe / Hdpe Risers And Other Requisite Spots As Per Layout Drawing Approved By The Department. Technical Specification As Per Annexure 250 Job 34 34 Supply, Installation, Testing, And Commissioning Of Hdpe Tees Of Size 90 Mm Dia ( Pn-10 ) . The Job Includes Welding Of Tees Through Hot Plate Welding With The Hdpe Main / Sub-Main Pipe / Hdpe Risers And Other Requisite Spots As Per Layout Drawing Approved By The Department. Technical Specification As Per Annexure 120 Job 35 35 Supply, Installation, Testing, And Commissioning Of Hdpe Service Saddle Of Size 90 Mm X 32Mm ( Pn-10 ) . The Job Includes Fitting Of The Service Saddle On Hdpe Main Pipe ( Wherever Arvs Are To Be Installed ) And On Sub-Main Pipes At Requisite Spots As Per Layout Drawing Approved By The Department. Technical Specification As Per Annexure 450 Job 36 36 Supply, Installation, Testing, And Commissioning Of Male Threaded Adaptors ( Mtas Of 32Mm Size ) . The Job Includes Fitting Of Mtas On Hdpe Main Pipe ( Wherever Arvs Are To Be Installed ) And On Sub-Main Pipes At Requisite Spots As Per Layout Drawing Approved By The Department. Technical Specification As Per Annexure 450 Job 37 37 Supply, Installation, Testing, And Commissioning Of Lldpe Pipe As Lateral Lines And Risers ( Nominal Dia 32Mm ) Grade-Ii ( Pn-2.5 ) . The Job Including Cutting Of Lldpe Pipe Of Requisite Lengths ( For Risers And Lateral Pipe Lines ) . The Job Also Includes Punching Of Lldpe Pipes Used As Laterals At Requisite Spots As Per Layout Drawing Approved By The Department. Technical Specification As Per Annexure 23190 M 38 38 Supply, Installation, Testing, And Commissioning Of Compression Tee ( 32Mm With All Side Compression Ring ) . Technical Specification As Per Annexure 340 Job 39 39 Supply, Installation, Testing, And Commissioning Of Compression End Caps Pe 32Mm. Ntechnical Specification As Per Annexure 700 Job 40 40 Supply, Installation, Testing, And Commissioning Of Compression Bends Pe 32Mm. Technical Specification As Per Annexure 30 Job 41 41 Supply, Installation, Testing, And Commissioning Of Compression Joiner Pe 32Mm. Technical Specification As Per Annexure 20 Job 42 42 Supply, Installation, Testing, And Commissioning Of Rotating Head Mini Sprinkler ( Full Circle ) Including Ms Riser, Vinyl Tubings, Stake Assembly For Sprinkler And Connecting The Said Pipe Tubes To The Lldpe Lateral Pipes Lines At Requisite Spots. 2580 Job 43 43 Supply, Installation, Testing, And Commissioning Of Rotating Head Mini Sprinkler ( Half Circle ) Including Ms Riser, Vinyl Tubings, Stake Assembly For Sprinkler And Connecting The Said Pipe Tubes To The Lldpe Lateral Pipes Lines At Requisite Spots. 200 Job 44 44 Supply, Installation, Testing, And Commissioning Of 75 Mm Dia Control Valves For Hdpe Pipe As Sectional And Isolation Valves. The Control Valves Are To Be Installed As Per The Layout Drawing And Site Requirement. 60 Job 45 45 Supply, Installation, Testing, And Commissioning Of Hdpe Tail Piece Pn-8 ( Dia Suitable For Hdpe Pipe Size Installed ) . Technical Specification As Per Annexure 120 Job 46 46 Supply, Installation, Testing, And Commissioning Of Hdpe Plain Flange Pn-8 ( Dia Suitable For Hdpe Pipe Size Installed ) . Technical Specification As Per Annexure 120 Job 47 47 Supply, Installation, Testing, And Commissioning Of Rubber / Caf Washers. ( Dia Suitable For Hdpe Pipe Size Installed ) 120 Job 48 48 Supply, Installation, Testing, And Commissioning Of Nut Bolt And Washer Of Suitable Size. 70 Kgs 49 49 Supply, Installation, Testing, And Commissioning Pvc Air Release Valves 25Mm Size Double Acting Male Threaded With Complete Assembly. 10 Job 50 50 Supply, Installation, Testing, And Commissioning Of Flush Valves / Compression Mta Suitable For Hdpe With Threaded End Cap ( 90 Mm ) . 60 Job 51 51 Supply, Installation, Testing, And Commissioning Of Sand Filter Of Capacity 30 M3 / Hr With Back Wash Assembly Including Filling Of Filter Media ( Crushed Silica Sand Of Particle Size 0.7 To 1.2 Mm With 98.8% Purity ) And Should Be Made Of High Quality Pretreated Epoxy Polyester Powder Coated Steel Tank. 1 Job 52 52 Supply, Installation, Testing, And Commissioning Of Hydro Cyclone Filter Of Capacity 30 M3 / Hr , Mild Steel Contruction Powder Coated With 70-80 Micron Thick Colored Pure Polyester From Both Inside And Outside Surface For Protection Against Corrosion And Weather Effects. Hydrodynamically Designed To Create Centrifugal Action To Seperate Particles Heavier Than Water To Remove Fine Sand And Silt Particles Of Higher Size Than 75 Micron. 1 Job 53 53 Supply, Installation, Testing, And Commissioning Of Screen Filter Of Capacity 30 M3 / Hr, Epoxy Coated Metal Of Higher Engineering Plastic In Cylindrical Shape Equipped With Interchangeable Perforated Filtering Elements Working At A Pressure Of Pn-10 With Degree Of Filteration 60-200 Mesh ( 75 Microns ) 1 Job 54 54 Supply, Installation, Testing, And Commissioning Of Fertilizer Tank Of Capacity 90 Liters With Fertilizer Venturi Injectors, Coated With More Than 70 Micron Thick Colour Epoxy Powder From Both Inside And Outside Surface For Protection Against Corrosion And Weather Effects, Innovative Turbulent Inlet Ensuring Through Mixing Of Chemicals / Fertilizers , Special Drain Port To Flush The Tank, Wide 8 Opening For Easy Pouring Of Stock Solutions, High Pressure Hose Assembly ( Inlet / Outlet Connections ) And Having Working Pressure Not Less Than 2Kg / Cm2 1 Job 55 55 Supply, Installation, Testing, And Commissioning Of Pressure Release Valve ( Of Reputed Make ) As Per Site Requirement. 1 Job 56 56 Providing And Laying Of Gi Sleeve, 150 Mm Class C, Flanged / Welded For Envisaged Road Cuts / Exposed Main As Per Site Requirement. However, The Roadcut Is Not In The Scope 10 M 57 57 Dismantling Of The Complete Above Ground Network Including Lldpe Pipe, Fittings, Sprinklers, Etc After Testing Of The System And Shifting Of Same To The Premises Of Care Taker Where The Material Shall Be Properly Stacked As Per The Instructions Of Engineer In-Charge 1 Job

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	22-Apr-2021	date extension	Date	10-05-2021
2	28-Apr-2021	Addendum	Technical Bid	10-05-2021
3	03-May-2021	Addendum	Other	10-05-2021
4	06-May-2021	corrigendum 04	Date	17-05-2021
5	11-May-2021	Corrigendum 05	Technical Bid	17-05-2021
6	18-May-2021	Corrigendum 06	Date	24-05-2021

INR 3000 /-

Refer document

Refer document

Name of Work: Supply, Installation, Testing and Commissioning of complete sprinkler irrigation equipment including HDPE pipe/LLDPE network for Saffron Crop cultivated area at bore well No. 52, 94, 105 & 110-A under implementation of National Mission on Saffron
	Sl. No.	Item Description	Item Code / Make	Quantity	Units
1	1	SITC of Sprinkler Irrigation System including HDPE Pipe/LLDPE pipeline for saffron Crop cultivated area under Implementation of National Mission on Saffron
2	2	Bore Well No. 52 (Command Area: 20.16 HA) Parigam pulwama\nBore Well No. 105 (Command Area: 16.80 HA) Chadoora Budgam\nBore Well No. 110A (Command Area: 16.80 HA) Parigam pulwama
3	3	Earth work excavation in trenches (manual excavation) upto minimum depth of 2 feet underground with adequate width which may range from 12'' for straight alignment of pipes to be laid under ground to 18'' at joining spots for laying of HDPE pipeline Main and Sub-main of Size 75mm. The job includes refilling of the excavated soil after laying of pipe line and its ramming. The trench work is to be executed strictly as per the layout drawings approved by the department.		2160	CUM
4	4	Supply, Installation, testing, and commissioning of HDPE pipes as size 75mm dia PN-8 Main /Sub-Main pipe lines and Risers for control valves/Flush valves (pipe size 75mm dia PN-8) inside the excavated trenches . The job includes welding of pipe joints through Hot plate welding. Technical Specification as per Annexure		16018	M
5	5	Supply, Installation, testing, and commissioning of HDPE elbows of size 75mm dia (PN-10). The job includes welding of elbows through hot plate welding with the HDPE Main/Sub-main pipe/HDPE risers and other requisite spots as per layout drawing approved by the department. Technical Specification as per Annexure		710	Job
6	6	Supply, Installation, testing, and commissioning of HDPE TEEs of size 75mm dia (PN-10). The job includes welding of TEEs through hot plate welding with the HDPE Main/Sub-main pipe/HDPE risers and other requisite spots as per layout drawing approved by the department.\nTechnical Specification as per Annexure		335	Job
7	7	Supply, Installation, testing, and commissioning of HDPE Service Saddle of size 75mm x 32mm (PN-10). The job includes fitting of the Service Saddle on HDPE Main pipe (wherever ARVs are to be installed) and on Sub-main pipes at requisite spots as per layout drawing approved by the department. Technical Specification as per Annexure		930	Job
8	8	Supply, Installation, testing, and commissioning of Male Threaded Adaptors (MTAs of 32mm Size). The job includes fitting of MTAs on HDPE Main pipe (wherever ARVs are to be installed) and on Sub-main pipes at requisite spots as per layout drawing approved by the department. Technical Specification as per Annexure		930	Job
9	9	Supply, Installation, testing, and commissioning of LLDPE pipe as lateral lines and risers ( Nominal Dia 32mm) grade-ii (PN-2.5) . The job including cutting of LLDPE pipe of requisite lengths ( for risers and lateral pipe lines) . The job also includes punching of LLDPE pipes used as laterals at requisite spots as per layout drawing approved by the department. Technical Specification as per Annexure		47834	M
10	10	Supply, Installation, testing, and commissioning of Compression TEE (32mm with all side compression ring). Technical Specification as per Annexure		935	Job
11	11	Supply, Installation, testing, and commissioning of Compression End Caps PE 32mm. Technical Specification as per Annexure		1880	Job
12	12	Supply, Installation, testing, and commissioning of Compression Bends PE 32mm. Technical Specification as per Annexure		95	Job
13	13	Supply, Installation, testing, and commissioning of Compression Joiner PE 32mm. Technical Specification as per Annexure		65	Job
14	14	Supply, Installation, testing, and commissioning of rotating head mini sprinkler (Full circle ) including MS riser, Vinyl tubings, stake assembly for sprinkler and connecting the said pipe tubes to the LLDPE lateral pipes lines at requisite spots.		5160	Job
15	15	Supply, Installation, testing, and commissioning of rotating head mini sprinkler (Half Circle) including MS riser, Vinyl tubings, stake assembly for sprinkler and connecting the said pipe tubes to the LLDPE lateral pipes lines at requisite spots.		530	Job
16	16	Supply, Installation, testing, and commissioning of 65 mm dia Control valves for HDPE pipe as sectional and isolation valves. The control valves are to be installed as per the layout drawing and site requirement.		182	Job
17	17	Supply, Installation, testing, and commissioning of HDPE Tail Piece PN-8 (Dia suitable for HDPE pipe Size installed). Technical Specification as per Annexure		364	Job
18	18	Supply, Installation, testing, and commissioning of HDPE Plain Flange PN-8 (Dia suitable for HDPE pipe Size installed). Technical Specification as per Annexure		364	Job
19	19	Supply, Installation, testing, and commissioning of Rubber/CAF washers. (Dia suitable for HDPE pipe Size installed)		364	Job
20	20	Supply, Installation, testing, and commissioning of Nut bolt and washer of suitable size.		300	Kgs
21	21	Supply, Installation, testing, and commissioning PVC Air release valves 25mm Size double acting Male Threaded with complete assembly.		30	Job
22	22	Supply, Installation, testing, and commissioning of Flush valves/ Compression MTA suitable for HDPE with threaded end cap (75mm).		180	Job
23	23	Supply, Installation, testing, and commissioning of sand filter of capacity 20 m3/hr with back wash assembly including filling of filter media (Crushed Silica sand of particle size 0.7 to 1.2 mm with 98.8% purity) and should be made of high quality pretreated epoxy polyester powder coated steel tank.		3	Job
24	24	Supply, Installation, testing, and commissioning of Hydro cyclone filter of capacity 20 m3/hr , Mild steel contruction powder coated with 70-80 micron thick colored pure polyester from both inside and outside surface for protection against corrosion and weather effects. Hydrodynamically designed to create centrifugal action to seperate particles heavier than water to remove fine sand and silt particles of higher size than 75 micron.		3	Job
25	25	Supply, Installation, testing, and commissioning of Screen filter of capacity 20 m3/hr, epoxy coated metal of Higher engineering plastic in cylindrical shape equipped with interchangeable perforated filtering elements working at a pressure of PN-10 with degree of filteration 60-200 mesh (75 Microns)		3	Job
26	26	Supply, Installation, testing, and commissioning of Fertilizer Tank of capacity 90 liters with fertilizer venturi injectors, coated with more than 70 micron thick colour epoxy powder from both inside and outside surface for protection against corrosion and weather effects, innovative turbulent inlet ensuring through mixing of chemicals/fertilizers , special drain port to flush the Tank, wide 8" opening for easy pouring of stock solutions, high pressure hose assembly (inlet/ outlet connections) and having working pressure not less than 2kg/cm2		3	Job
27	27	Supply, Installation, testing, and commissioning of pressure release valve (of reputed make) as per site requirement.		3	Job
28	28	Providing and laying of GI Sleeve, 150 mm Class C, Flanged/welded for envisaged road cuts/ exposed main as per site requirement. However, the roadcut is not in the scope		30	M
29	29	Dismantling of the complete above ground network including LLDPE pipe, fittings, sprinklers, etc after testing of the system and shifting of same to the premises of care taker where the material shall be properly stacked as per the instructions of Engineer In-charge	1	3	Job
30	30	Bore Well No. 94 (Command Area: 26.88 HA) Site: Parigam : Pulwama
31	31	Earth work excavation in trenches (manual excavation) upto minimum depth of 2 feet underground with (in all kinds of soil) adequate width which may range from 12'' for straight alignment of pipes to be laid under ground to 18'' at joining spots for laying of HDPE pipeline Main and Sub-main of Size 90 mm. The job includes refilling of the excavated soil after laying of pipe line and its ramming. The trench work is to be executed strictly as per the layout drawings approved by the department.		1302	CUM
32	32	Supply, Installation, testing, and commissioning of HDPE pipes as size 90mm dia PN-8 Main /Sub-Main pipe lines and Risers for control valves/Flush valves (pipe size 90 mm dia PN-8) inside the excavated trenches . The job includes welding of pipe joints through Hot plate welding. Technical Specification as per Annexure		8178	M
33	33	Supply, Installation, testing, and commissioning of HDPE elbows of size 90 mm dia (PN-10). The job includes welding of elbows through hot plate welding with the HDPE Main/Sub-main pipe/HDPE risers and other requisite spots as per layout drawing approved by the department. Technical Specification as per Annexure		250	Job
34	34	Supply, Installation, testing, and commissioning of HDPE TEEs of size 90 mm dia (PN-10). The job includes welding of TEEs through hot plate welding with the HDPE Main/Sub-main pipe/HDPE risers and other requisite spots as per layout drawing approved by the department. Technical Specification as per Annexure		120	Job
35	35	Supply, Installation, testing, and commissioning of HDPE Service Saddle of size 90 mm x 32mm (PN-10). The job includes fitting of the Service Saddle on HDPE Main pipe (wherever ARVs are to be installed) and on Sub-main pipes at requisite spots as per layout drawing approved by the department. Technical Specification as per Annexure		450	Job
36	36	Supply, Installation, testing, and commissioning of Male Threaded Adaptors (MTAs of 32mm Size). The job includes fitting of MTAs on HDPE Main pipe (wherever ARVs are to be installed) and on Sub-main pipes at requisite spots as per layout drawing approved by the department. Technical Specification as per Annexure		450	Job
37	37	Supply, Installation, testing, and commissioning of LLDPE pipe as lateral lines and risers ( Nominal Dia 32mm) grade-ii (PN-2.5) . The job including cutting of LLDPE pipe of requisite lengths ( for risers and lateral pipe lines) . The job also includes punching of LLDPE pipes used as laterals at requisite spots as per layout drawing approved by the department. Technical Specification as per Annexure		23190	M
38	38	Supply, Installation, testing, and commissioning of Compression TEE (32mm with all side compression ring). Technical Specification as per Annexure		340	Job
39	39	Supply, Installation, testing, and commissioning of Compression End Caps PE 32mm. \nTechnical Specification as per Annexure		700	Job
40	40	Supply, Installation, testing, and commissioning of Compression Bends PE 32mm. Technical Specification as per Annexure		30	Job
41	41	Supply, Installation, testing, and commissioning of Compression Joiner PE 32mm. Technical Specification as per Annexure		20	Job
42	42	Supply, Installation, testing, and commissioning of rotating head mini sprinkler (Full circle ) including MS riser, Vinyl tubings, stake assembly for sprinkler and connecting the said pipe tubes to the LLDPE lateral pipes lines at requisite spots.		2580	Job
43	43	Supply, Installation, testing, and commissioning of rotating head mini sprinkler (Half Circle) including MS riser, Vinyl tubings, stake assembly for sprinkler and connecting the said pipe tubes to the LLDPE lateral pipes lines at requisite spots.		200	Job
44	44	Supply, Installation, testing, and commissioning of 75 mm dia Control valves for HDPE pipe as sectional and isolation valves. The control valves are to be installed as per the layout drawing and site requirement.		60	Job
45	45	Supply, Installation, testing, and commissioning of HDPE Tail Piece PN-8 (Dia suitable for HDPE pipe Size installed). Technical Specification as per Annexure		120	Job
46	46	Supply, Installation, testing, and commissioning of HDPE Plain Flange PN-8 (Dia suitable for HDPE pipe Size installed). Technical Specification as per Annexure		120	Job
47	47	Supply, Installation, testing, and commissioning of Rubber/CAF washers. (Dia suitable for HDPE pipe Size installed)		120	Job
48	48	Supply, Installation, testing, and commissioning of Nut bolt and washer of suitable size.		70	Kgs
49	49	Supply, Installation, testing, and commissioning PVC Air release valves 25mm Size double acting Male Threaded with complete assembly.		10	Job
50	50	Supply, Installation, testing, and commissioning of Flush valves/ Compression MTA suitable for HDPE with threaded end cap (90 mm).		60	Job
51	51	Supply, Installation, testing, and commissioning of sand filter of capacity 30 m3/hr with back wash assembly including filling of filter media (Crushed Silica sand of particle size 0.7 to 1.2 mm with 98.8% purity) and should be made of high quality pretreated epoxy polyester powder coated steel tank.		1	Job
52	52	Supply, Installation, testing, and commissioning of Hydro cyclone filter of capacity 30 m3/hr , Mild steel contruction powder coated with 70-80 micron thick colored pure polyester from both inside and outside surface for protection against corrosion and weather effects. Hydrodynamically designed to create centrifugal action to seperate particles heavier than water to remove fine sand and silt particles of higher size than 75 micron.		1	Job
53	53	Supply, Installation, testing, and commissioning of Screen filter of capacity 30 m3/hr, epoxy coated metal of Higher engineering plastic in cylindrical shape equipped with interchangeable perforated filtering elements working at a pressure of PN-10 with degree of filteration 60-200 mesh (75 Microns)		1	Job
54	54	Supply, Installation, testing, and commissioning of Fertilizer Tank of capacity 90 liters with fertilizer venturi injectors, coated with more than 70 micron thick colour epoxy powder from both inside and outside surface for protection against corrosion and weather effects, innovative turbulent inlet ensuring through mixing of chemicals/fertilizers , special drain port to flush the Tank, wide 8" opening for easy pouring of stock solutions, high pressure hose assembly (inlet/ outlet connections) and having working pressure not less than 2kg/cm2		1	Job
55	55	Supply, Installation, testing, and commissioning of pressure release valve (of reputed make) as per site requirement.		1	Job
56	56	Providing and laying of GI Sleeve, 150 mm Class C, Flanged/welded for envisaged road cuts/ exposed main as per site requirement. However, the roadcut is not in the scope		10	M
57	57	Dismantling of the complete above ground network including LLDPE pipe, fittings, sprinklers, etc after testing of the system and shifting of same to the premises of care taker where the material shall be properly stacked as per the instructions of Engineer In-charge		1	Job
58	58	Note: The job reflceted for head units (Sand filter, Hydro cyclone filter, Screen filter and Fertilization tank) are inclusive of cost on account of GI fittings/pipes/valves/flanges/washers/nuts & bolts etc of suitable size for interconnecting various componets of head units. The bidders are advised to quote their rates for above items inclusive of these fittings.
59	59	NB: The sites of work are away from approach road deep into saffron fields and as such intending bidders are required to visit the site of work before quoting their rates. The rates quoted shall be inclusive of charges on account of watch & ward of equipment during execution of work till handing over of the well to the executing agency/indenting department. In case of damages/theft during the said period no claim whatsoever shall be entertained by the Deptt.