| 1 | 1 | Providing and fixing aluminium sliding door bolts, ISI marked anodised\n(anodic coating not less than grade AC 10 as per IS : 1868),\ntransparent or dyed to required colour or shade, with nuts and screws etc. complete :\n 250x16 mm | BI01010001010000000000000515BI0100001113 | 13 | Each |
|---|
| 2 | 2 | Providing and fixing anodised aluminium grill (anodised transparent\nor dyed to required shade according to IS: 1868 with minimum anodic\ncoating of grade AC 15) of approved design/pattern, with approved\nstandard section and fixed to the existing window frame with C.P.\nbrass/ stainless steel screws @ 200 mm centre to centre, including\ncutting the grill to proper opening size for fixing and operation of\nhandles and fixing approved anodised aluminium standard section\naround the opening, all complete as per requirement and direction of\nEngineer-in-charge. (Only weight of grill to be measured for payment). | BI01010001010000000000000515BI0100001114 | 10 | Kilogram |
|---|
| 3 | 3 | Distempering with oil bound distemper of approved brand\nand manufacture to give an even shade :\n Old work (one or more coats) (Excluding the cost of oil bound distemper). | BI01010001010000000000000515BI0100001115 | 944 | Square Metre |
|---|
| 4 | 4 | Finishing walls with Acrylic Smooth exterior paint of required shade :\nOld work (One or more coat applied @ 0.90 ltr/ 10 sqm (exclading the cost of acrylic smooth exterior paint)\non existing cement paint surface | BI01010001010000000000000515BI0100001116 | 903 | Square Metre |
|---|
| 5 | 5 | Dismantling old plaster or skirting raking out joints and cleaning the\nsurface for plaster including disposal of rubbish to the dumping ground\nwithin 50 metres lead. | BI01010001010000000000000515BI0100001117 | 110 | Square Metre |
|---|
| 6 | 6 | 12 mm cement plaster of mix :\n\n1:6 (1 cement: 6 (75% course sand and 25% manufactured sand) | BI01010001010000000000000515BI0100001118 | 110 | Square Metre |
|---|
| 7 | 7 | Finishing walls with Acrylic Smooth exterior paint of required shade :\nNew work (Two or more coat applied @ 1.67 ltr/10 sqm\nover and including priming coat of exterior primer applied\n@ 2.20 kg/10 sqm)(Excluding the cost of acrylic smooth exterior paint and exterior primer) | BI01010001010000000000000515BI0100001119 | 110 | Square Metre |
|---|
| 8 | 8 | Distempering with oil bound washable distemper of approved brand\nand manufacture to give an even shade :\nNew work (two or more coats) over and including water\nthinnable priming coat with cement primer(Excluding the cost of oil bound distemper and water thinable cement primer) | BI01010001010000000000000515BI0100001120 | 95 | Square Metre |
|---|
| 9 | 9 | Painting with synthetic enamel paint of approved brand and\nmanufacture to give an even shade :\nTwo or more coats on new work (Excluding the cost of synthetic enamel paint) | | 833 | Square Metre |
|---|
| 10 | 10 | Painting with synthetic enamel paint of approved brand and\nmanufacture of required colour to give an even shade :\nOne or more coats on old work (Excluding the cost of synthetic enamel paint) | | 100 | Square Metre |
|---|
| 11 | 11 | Providing and laying vitrified tiles in different sizes (thickness to be specified by manufacture), with water absorption less than 0.08% and conforming to I.S 15622 of approved make in all colours & shade with cement based high polymer modified quick set tile adhesive (water based) conforming to IS:15477 in average 3 mm thickness including grounting the joint with white cement & matching pigment etc. complete size of tile 600 x600 mm | | 18 | Square Metre |
|---|
| 12 | 12 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm\nthickness | | 5 | each |
|---|
| 13 | 13 | Removing dry or oil bound distemper, water proofing cement paint\nand the like by scrapping, sand papering and preparing the surface\nsmooth including necessary repairs to scratches etc. complete. | | 95 | Square Metre |
|---|
| 14 | 14 | Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacture over the plastered wall surface to prepare the surface even and smooth complete (Excluding the cost of white cement based putty). | | 95 | Square Metre |
|---|
| 15 | 15 | Providing and fixing on wall face unplasticised Rigid PVC rain water\npipes conforming to IS : 13592 Type A, including jointing with seal\nring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,\n(i) Single socketed pipes.\n110 mm diameter | | 75 | metre |
|---|
| 16 | 16 | Providing and fixing 12 mm thick prelaminated particle board flat\npressed three layer or graded wood particle board conforming to IS:\n12823 Grade l Type ll, in panelling fixed in aluminum doors, windows\nshutters and partition frames with C.P. brass / stainless steel screws\netc. complete as per architectural drawings and directions of engineerin-\ncharge.\nPre-laminated particle board with decorative lamination\non both sides | | 22 | Square Metre |
|---|
| 17 | 17 | Providing & fixing fly proof wire gauze to windows, clerestory windows &\ndoors with M.S. Flat 15x3 mm and nuts & bolts complete.\nStainless steel (grade 304) wire gauze of 0.5 mm dia wire\nand 1.4 mm aperture on both sides | | 21 | Square Metre |
|---|
| 18 | 18 | Providing and fixing white vitreous china pedestal type water closet\n(European type W.C. pan) with seat and lid, 10 litre low level white\nP.V.C. flushing cistern, including flush pipe, with manually controlled\ndevice (handle lever), conforming to IS : 7231, with all fittings and\nfixtures complete, including cutting and making good the walls and\nfloors wherever required :\nW.C. pan with ISI marked white solid plastic seat and lid | | 5 | each |
|---|
| 19 | 19 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to\nIS: 15622 (thickness to be specified by the manufacturer), of approved\nmake, in all colours, shades except burgundy, bottle green, black of\nany size as approved by Engineer-in-Charge, in skirting, risers of steps\nand dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3(75% coarse sand & 25% manufacture sand))) and jointing with grey cement slurry @ 3.3kg per sqm,\nincluding pointing in white cement mixed with pigment of matching shade\ncomplete. | | 8 | Square Metre |
|---|
| 20 | 20 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having\nthermal stability for hot & cold water supply, including all CPVC plain &\nbrass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing.\nThis includes jointing of pipes & fittings with one step CPVC solvent\ncement and the cost of cutting chases and making good the same\nincluding testing of joints complete as per direction of Engineer in Charge.\nConcealed work, including cutting chases and making good the walls\netc.\n15 mm nominal outer dia Pipes | | 8 | metre |
|---|
| 21 | 21 | Taking out and refixing aluminium doors window, fixed glazing including disposal of unservicable surplus material and stacking of unservicable material within 50 meters lead as direction by engineer-in-charge etc, complete. | | 20 | each |
|---|
| 22 | 22 | Providing and fixing 600x450 mm beveled edge mirror of superior\nglass (of approved quality) complete with 6 mm thick hard board\nground fixed to wooden cleats with C.P. brass screws and washers\ncomplete. | BI01010001010000000000000515BI0100001123 | 5 | each |
|---|
| 23 | 23 | Greasing oilling and making good in position collapsible steel shutter for span upto 15 sq metre consisting of vertical chennels 20x10x2 mm, braced with flat iron diagonals 20x5 mm size with top and bottom rail of T iron 40x40x6 mm of 40 mm dia steel pulleys complete with bolts nuts locking arrangement stoppers handles including applying a priming coat of approved steel primer and painting with synthetic enamel paint two or more coats etc. complete in all respect as per direction of engineer in charge at site. | BI01010001010000000000000515BI0100001125 | 4 | Each |
|---|
| 24 | 24 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto\n1 metre long with S.S. triangular plate to Eureopean type W.C. of\nquality and make as approved by Engineer - in - charge. | | 15 | each |
|---|
| 25 | 25 | Supply and stacking of following material at site as per direction and entire satisfaction of engineer-in-charge including all load\n\nOil Bound Distemper | | 110 | kilogram |
|---|
| 26 | 25.1 | Exterior Primer | | 25 | Litre |
|---|
| 27 | 25.2 | Acylic plastic emulsion paint | | 100 | Litre |
|---|
| 28 | 25.3 | Synthetic enamel paint | | 104 | Litre |
|---|
| 29 | 25.4 | White cement based putty | | 139 | Kilogram |
|---|
| 30 | 25.5 | Cement primer\n\nConditions:\nFollowing Material will be credited to the agency\n1) Dismantled sliding tower bolts @20/-each.\n2) Dismantled aluminium grill @100/-Kilogram.\n3) Dismantled hydraulic Floor spring @200/-each.\n4) Dismantled fly proof gauge @200/- Square metre.\n5)Dismantled C.P./S.S. Jets 8mm dia @30/- each.\n6) 0.74 MT cement arranged by the contractor himself.\n7) 1.48 KL STP Water is to be procured from NDMC Sewarage plant to the contractor. | | 7 | Litre |
|---|
