South Eastern Coalfields Limited-SECL has published Providing Kitchen Shed Bathrooms , Boundary Wall And Repair Of Building Of K . B Patel College Building For Accommodation Of Security Forces At Kurasia Colliery Of Chirimiri Area . . Submission Date for this Tender is 22-04-2021. Building Work Tenders in Chirimiri Chhattisgarh. Bidders can get complete Tender details and download the document.
Name of the Work / Contract No: | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.\r\nAll kinds of soil. | 1 | 216.05 | cum |
2 | 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :\r\n1:4:8 (1 cement : 4 fine sand : 8 graded stone aggregate 40 mm nominal size) | 2 | 48.45 | cum |
3 | 3 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:\r\nCement mortar 1:6 (1 cement : 6 coarse sand) | 3 | 103.94 | cum |
4 | 4 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :\r\n1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) | 4 | 4.86 | cum |
5 | 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :\r\n1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | 5 | 14.27 | cum |
6 | 6 | Centering and shuttering including strutting, propping etc. and removal of form work for :\r\nColumns, piers, abutments, pillars, posts and struts | 6 | 30.24 | sqm |
7 | 7 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :\r\nCement mortar 1:6 (1 cement : 6 coarse sand) | 7 | 180.68 | cum |
8 | 8 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in :\r\ncement mortar 1:4 (1 cement : 4 coarse sand) | 8 | 22.6 | sqm |
9 | 9 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.\r\nIn gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | 9 | 572.4 | kg |
10 | 10 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.\r\nFixed to steel windows by welding | 10 | 414 | kg |
11 | 11 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). | 11 | 7.4 | cum |
12 | 12 | Providing, hoisting and fixing up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but excluding cost of reinforcement, with 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size). | 12 | 3.15 | cum |
13 | 13 | Centering and shuttering including strutting, propping etc. and removal of form for :\r\nLintels, beams, plinth beams, girders, bressumers and cantilevers | 13 | 19.48 | sqm |
14 | 14 | Centering and shuttering including strutting, propping etc. and removal of form for :\r\nColumns, Pillars, Piers, Abutments, Posts and Struts | 14 | 14.4 | sqm |
15 | 15 | Centering and shuttering including strutting, propping etc. and removal of form for :\r\nSuspended floors, roofs, landings, balconies and access platform | 15 | 56.54 | sqm |
16 | 16 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.\r\nCold twisted bars | 16 | 1387 | kilogram |
17 | 17 | 12 mm cement plaster of mix :\r\n1:6 (1 cement: 6 fine sand) | 17 | 2396.6 | sqm |
18 | 18 | 6 mm cement plaster of mix :\r\n1:3 (1 cement : 3 fine sand) | 18 | 23.1 | sqm |
19 | 19 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.\r\n40 mm thick with 20 mm nominal size stone aggregate | 19 | 121.4 | sqm |
20 | 20 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | 20 | 123.58 | sqm |
21 | 21 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete. | 21 | 68.3 | sqm |
22 | 22 | 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 ( 1cement : 5 coarse sand) with joints finished flush.\r\nRed sand stone | 22 | 388.91 | sqm |
23 | 23 | 12 mm cement plaster finished with a floating coat of neat cement of mix :\r\n1:4 (1 cement: 4 fine sand) | 23 | 244.7 | sqm |
24 | 24 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.\r\nUsing flats 30x6mm for diagonal braces and central cross piece | 24 | 15.12 | sqm |
25 | 25 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture . M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing.\r\n30 mm thick plain PVC door shutters | 25 | 15 | sqm |
26 | 26 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :\r\n300x16 mm | 26 | 12 | Nos |
27 | 27 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :\r\n125 mm | 27 | 16 | Nos |
28 | 28 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :\r\n100 mm | 28 | 16 | Nos |
29 | 29 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :\r\n100 mm | 29 | 20 | Nos |
30 | 30 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :\r\n200x10 mm | 30 | 20 | Nos |
31 | 31 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. | 31 | 2.52 | sqm |
32 | 32 | Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground.\r\nFor door/ window/ clerestory window | 32 | 8.4 | sqm |
33 | 33 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required E.P.D.M rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :\r\nFor fixed portion\r\nAnodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | 33 | 60.48 | kg |
34 | 34 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):\r\nWith float glass panes of 4.0 mm thickness | 34 | 3.5 | sqm |
35 | 35 | Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.\r\nHot finished welded type tubes | 35 | 4153 | kg |
36 | 36 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 36 | 221.3 | sqm |
37 | 37 | Extra for providing and fixing wind ties of 40x 6 mm flat iron section. | 37 | 178 | metre |
38 | 38 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.\r\nSize of Tile 600x600 mm | 38 | 186 | sqm |
39 | 39 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.\r\n110 mm diameter | 39 | 60 | metre |
40 | 40 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.\r\nBend 87.5°\r\n110 mm bend | 40 | 20 | Nos |
41 | 41 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.\r\n110 mm | 41 | 40 | Nos |
42 | 42 | White washing with lime to give an even shade :\r\nOld work (two or more coats) | 42 | 450 | sqm |
43 | 43 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :\r\nOld work (one or more coats) | 43 | 12 | sqm |
44 | 44 | Finishing walls with Acrylic Smooth exterior paint of required shade :\r\nOld work (One or more coat applied @ 0.90 ltr/10 sqm). | 44 | 950 | sqm |
45 | 45 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :\r\nOne or more coats on old work | 45 | 280 | sqm |
46 | 46 | Colour washing such as green, blue or buff to give an even shade :\r\nNew work (two or more coats) with a base coat of white washing with lime | 46 | 1120.29 | sqm |
47 | 47 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | 47 | 216.05 | cum |
48 | 48 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.\r\nAll kinds of soil | 48 | 180 | cum |
49 | 49 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m.\r\nAll kinds of soil | 49 | 1800 | sqm |
50 | 50 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. | 50 | 2000 | sqm |
51 | 51 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall\r\n15 mm dia nominal bore | 51 | 80 | metre |
52 | 52 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall\r\n20 mm dia nominal bore | 52 | 90 | metre |
53 | 53 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall\r\n25 mm dia nominal bore | 53 | 120 | metre |
54 | 54 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work\r\n50 mm dia nominal bore | 54 | 120 | metre |
55 | 55 | Providing and fixing brass bib cock of approved quality :\r\n15 mm nominal bore | 55 | 20 | Nos |
56 | 56 | Providing and fixing brass stop cock of approved quality :\r\n15 mm nominal bore | 56 | 20 | Nos |
57 | 57 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :\r\n25 mm nominal bore | 57 | 6 | Nos |
58 | 58 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :\r\n100 mm diameter | 58 | 6 | Nos |
59 | 59 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. per | 59 | 10000 | litre |
60 | 60 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :\r\nWhite Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | 60 | 8 | Nos |
61 | 61 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :\r\nWhite Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap | 61 | 8 | Nos |
62 | 62 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :\r\nOne urinal basin with 5 litre white P.V.C. automatic flushing cistern | 62 | 6 | Nos |
63 | 63 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :\r\n100 mm inlet and 75 mm outlet\r\nSand Cast Iron S&S as per IS- 1729 | 63 | 6 | Nos |
64 | 64 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :\r\n100 mm diameter | 64 | 60 | metre |
65 | 65 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design :\r\n100 mm diameter S.W. pipe | 65 | 60 | metre |
66 | 66 | Point wiring (excluding metallic switch box &sheet but including switches, sockets, lamp holders/ciling roses etc) with 1.5 sq mm PVC insulated cable FR with copper multi strand conductor ISI marked in surface rigid PVC CASING AND CAPPING ISI marked of suitable size and 1.5 sq mm PVC insulated copper earth continuity conductor of green colour inside casing & capping etc. as required as per specification for Light point/Fanpoint short point | 66 | 60 | Nos. |
67 | 67 | Point wiring (excluding metallic switch box &sheet ) for 3 Pin 16 Amp. Socket Outlet Point with 4 sq mm PVC insulated cable FR with copper multi strand conductor ISI marked in surface rigid PVC CASING AND CAPPING ISI marked of suitable size etc. with 16 Amp. F.T. switch &socket/S.S combined 6/16 Amp. of ISI Marked and 4 sq mm PVC insulated copper earth continuity conductor of green colour inside capping as per specification for;- on separate Board Short Point | 67 | 20 | Nos. |
68 | 68 | Point wiring (excluding metallic switch box &sheet but including switches, sockets, lamp holders/ciling roses etc) with 1.5 sq mm PVC insulated cable FR with copper multi strand conductor ISI marked in surface rigid PVC CASING AND CAPPING ISI marked of suitable size and 1.5 sq mm PVC insulated copper earth continuity conductor of green colour inside casing & capping with required materials as per specification on same board | 68 | 30 | Nos. |
69 | 69 | Wiring for Sub -mains with PVC insulated cable FR with copper multi stand conductor ISI marked in surface rigid PVC conduit( MMS) ISI marked of suitable size (conduit included) including 2mm thick accessories, connection etc. as equired as per specification 2wire SUB -MAIN 2.5 sq mm cable in 20 mm conduit meter | 69 | 200 | metre |
70 | 70 | supplying, of ISI marked switch fuse unit (re wirable) double pole conduit/cable gland entry with two earthing terminals- 32 Ams. 250 volts | 70 | 4 | Nos. |
71 | 71 | supplying, of ISI marked and accepted standard of miniature circuit breaker (MCB) of C series suitable for 240/415 volts 50 cycle, 10KA value Ac supply confirming to Is; 8828:1996,IEC:60896;2002 but without enclosures :-Single Pole & Neutral (SPN) 6 Amp to 32 Amp rating | 71 | 4 | Nos. |
72 | 72 | Earthing with G.I earth plate 600mm x600mmx6mm thick including accessories and providing masonary encloser in cement mortar cover plate having locking arrangement on the top and GI watering pipe 20 mm dia 2.70 metre long etc. (but without charcoal or coke and salt0 complete as required | 72 | 2 | Nos. |
73 | 73 | Add Extra for using salt and charcoal/coke for pipe earth electrode as required including excavation & refilling Excavation by making hole with auger | 73 | 2 | Nos. |
74 | 74 | Total impact of GST for the purpose of CTC | 74 | 1 | Nos |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail