Military Engineer Services-MES has published Special Repairs To Bldg No . T-18 ( Auditorium ) And Special Repairs To Bldg No . T-07 And T-46 ( Offrs Living And Mess ) Of Mh At Likabali Mil Stn Under Ge 872 Ews. Submission Date for this Tender is 29-04-2021. Building Repair Tenders in LIKABALI Assam. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 15-Apr-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 22-04-2021 |
| 2 | 21-Apr-2021 | DATE | Date | 27-04-2021 |
| 3 | 28-Apr-2021 | Amendment | Date | 29-04-2021 |
| NAME OF WORK : SPECIAL REPAIRS TO BLDG No. T-18 (AUDITORIUM) AND SPECIAL REPAIRS TO BLDG No. T-07 & T-46 (OFFRS LIVING & MESS) OF MH AT LIKABALI MIL STN UNDER GE 872 EWS | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | UNITS | |
| 1 | 1 | B/R SERVICES/WORKS | BI01010001010000000000000515BI0100001113 | ||
| 2 | 1.001 | Demolition Cement Concrete (un-reinforced) of any description in Ground Floors, Pavings, etc. not exc. 150mm thickness (above or below Ground Level) and removing debris, etc. to a distance not exc. 100.00 Metre, complete all as specified and as directed. | BI01010001010000000000000515BI0100001114 | 3.5 | CUBIC METRE |
| 3 | 1.002 | Demolition Reinforced Cement Concrete of any description and in any Position, not otherwise specifically provided for and Removing debris, etc. to a distance not exc. 100.00 Metre, complete all as specified and as directed. | BI01010001010000000000000515BI0100001115 | 1.5 | CUBIC METRE |
| 4 | 1.003 | Demolition Brick Work or Pre-cast Concrete Block Masonry, built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc., complete all as specified and as directed. | BI01010001010000000000000515BI0100001116 | 9.5 | CUBIC METRE |
| 5 | 1.004 | Dismantling Timber Scantlings 40 Sq Cm and Over in Section in Unframed Work, Seggregating Serviceable Timber Scantlings and keep in Safe Custody for Refixing, complete all as specified and as directed. | BI01010001010000000000000515BI0100001117 | 2 | CUBIC METRE |
| 6 | 1.005 | Taking down Chowkat or Frame of any description (without Taking Off Shutter from the Frame) not exc. 1.50 Square Metre Each, complete all as specified and as directed. | BI01010001010000000000000515BI0100001118 | 15 | EACH |
| 7 | 1.006 | Taking down Chowkat or Frame of any description (without Taking Off Shutter from the Frame) of any description, exc. 1.50 Square Metre but not exc. 4.00 Square Metre Each, complete all as specified and as directed. | BI01010001010000000000000515BI0100001119 | 13 | EACH |
| 8 | 1.007 | Taking down Shutter of any description, exc. 1.00 Square Metre and not exc. 2.00 Square Metre Each, complete all as specified and as directed. | BI01010001010000000000000515BI0100001120 | 2 | PER LEAF |
| 9 | 1.008 | Dismantling Wrought Iron or Mild Steel Work of any description not otherwise\nprovided for, complete all as specified and as as directed. | BI01010001010000000000000515BI0100001121 | 1 | QUINTAL |
| 10 | 1.009 | Dismantling Plain or Corrugated Steel Sheeting of any gauge and thickness, Segregating the Serviceable Steel Sheeting, stacking properly at Sites and keep in Safe Custody for re-use, complete all as specified and as directed. | BI01010001010000000000000515BI0100001122 | 433 | SQUARE METRE |
| 11 | 1.01 | Dismantling Wall and Ceiling Boards (Fibre, Pulp, Insulation, etc.) or Insulation Boards/ Slabs/ Blankets of any descriptions including Cover Fillets, complete all as specified and as as directed. | BI01010001010000000000000515BI0100001123 | 370 | SQUARE METRE |
| 12 | 1.011 | Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing) and removing debris, etc. to a distance not exc. 100.00 Metre, complete all as specified and as directed. | BI01010001010000000000000515BI0100001124 | 207 | SQUARE METRE |
| 13 | 1.012 | Taking down Cement Plaster including raking out Joints, hacking for Key, scrubbing down with Water and removing Debris, etc. etc. to a distance not exc. 100.00 Metre, complete all as specified and as directed. | BI01010001010000000000000515BI0100001125 | 220 | SQUARE METRE |
| 14 | 1.013 | Taking up or down Steel Tubing 15mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed. | BI01010001010000000000000515BI0100001126 | 50 | RUNNING METRE |
| 15 | 1.014 | Taking up or down Steel Tubing 20mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed. | BI01010001010000000000000515BI0100001127 | 30 | RUNNING METRE |
| 16 | 1.015 | Taking/ Lowering down Unserviceable Water Storage Tank of any description, exc. 250 Litre and not exc. 500 Litre Capacity after disconnecting all Water Pipe Line Connections, complete all as specified and as directed. | BI01010001010000000000000515BI0100001128 | 2 | EACH |
| 17 | 1.016 | M&L Cement Concrete 1:3:6 (20mm graded stone aggregate) in Surface Channels and Drains, etc. including necessary Formwork as ordered, Finished Concrete Surfaces Even and Smooth without Using Extra Cement, complete all as specified and as directed.\nNOTE : Cost of Formwork shall deemed to be included in Quoted Unit Rate. | BI01010001010000000000000515BI0100001129 | 2 | CUBIC METRE |
| 18 | 1.017 | M&L Cement Concrete 1:3:6 (20mm graded stone aggregate) in Bed Plates, Bed Block, Benching, Coping, Holdfasts, Kerb Stones, etc. including necessary Formwork and Weathering, slightly Rounded or Chamfered Angles and Throating, complete all as specified and as directed.\nNOTE : Cost of Formwork shall deemed to be included in Quoted Unit Rate. | BI01010001010000000000000515BI0100001130 | 5 | CUBIC METRE |
| 19 | 1.018 | M&L Reinforced Cement Concrete 1:2:4 (20mm graded stone aggregate) in Slabs supported on Walls, Beams and Columns in Floors, Roofs, Landings, Balconies, Canopies, Deck Slabs and in Shelves and the like, complete all as specified and as directed.\nNOTE : Reinforcement & Formwork will be Measured and Paid for separately under appropriate Items. | BI01010001010000000000000515BI0100001131 | 1.5 | CUBIC METRE |
| 20 | 1.019 | M&L Formwork to Soffits of Suspended Slabs such as Roof Slabs, Floor Slabs, Landings and Similar Work; not exc. 200mm thick (Horizontal or Sloping), etc., Rough Finished surfaces of Concrete, complete all as specified and as directed. | BI01010001010000000000000515BI0100001132 | 15 | SQUARE METRE |
| 21 | 1.02 | M&L Pre-cast Cement Concrete Block Masonry with Solid Blocks (as per IS-2185) in Cement Concrete 1:3:6 (20mm graded stone aggregate), exc. 10 Cm in Width and setting in Cement Mortar 1:6, complete all as specified and as directed | BI01010001010000000000000515BI0100001133 | 2 | CUBIC METRE |
| 22 | 1.021 | M&L Brick Work with Sub-Class ‘B’ Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed. | BI01010001010000000000000515BI0100001134 | 5 | CUBIC METRE |
| 23 | 1.022 | M&L Brick Work Half Brick thick with Sub-Class ‘B’ Bricks (Old Size Bricks), Straight or Curved on Plan to any Radius, built in Cement Mortar 1:4, complete all as specified and as directed. | BI01010001010000000000000515BI0100001135 | 25 | SQUARE METRE |
| 24 | 1.023 | M&L Cutting Holes in Brick Walls, not exc. Half Brick thick, built in Cement Mortar for inserting of Holdfasts, Lugs, etc. and Making Good to dismantled portion with Cement Concrete 1:2:4 (20mm graded stone aggregate) or Cement Mortar 1:3 (as required) and adjoining Surfaces in Cement Mortar 1:4, complete all as specified and as directed. | BI01010001010000000000000515BI0100001136 | 26 | EACH |
| 25 | 1.024 | M&L Second Class Hardwood (well seasoned) in Scantling, Cleansawn, Timber fixed (Unframed work), fixing with Nails, complete all as specified and as directed. | BI01010001010000000000000515BI0100001137 | 1.5 | CUBIC METRE |
| 26 | 1.025 | M&L Refixing only Second Class Hardwood (well seasoned) in Scantling (Serviceable Timber Scantling obtained from Item No. 1.003 here-in-before), Timber fixed (Unframed work), fixing with Nails, complete all as specified and as directed. | BI01010001010000000000000515BI0100001138 | 0.5 | CUBIC METRE |
| 27 | 1.026 | M&L Second Class Hardwood (well seasoned) Plain, Solid, Straight, Chowkats and Frame, Wrought, Framed rebated on the Solid, Rounded or Chamfered, put together with Glue pinned at Joints, complete all as specified and as directed. | BI01010001010000000000000515BI0100001139 | 0.75 | CUBIC METRE |
| 28 | 1.027 | M&L Plain Framed Factory Made Panelled Shutter 40mm thick having Two Panels with Second Class Hardwood Lock Rails and Stiles and Panels of 12mm thick BWP Commercial Ply or 12mm thick Veneered Particle Board with Commercial Veneering on both Faces, size of Rail and Stile as per IS : 1003 (Part I), Kiln Seasoned and Chemically Pressure treated and fitted to Chowkat, complete all as specified and as directed. | BI01010001010000000000000515BI0100001140 | 8 | SQUARE METRE |
| 29 | 1.028 | M&L Second Class Hardwood (well seasoned) Glazed and Skeleton Shutter 35mm thick, Open rebated and prepared to receive Glass, Gauze, etc. (Without Sash Bars), Edges of Framing plain, chamfered or rounded. fitted with cut and mitred Beads for securing glass, etc.; sizes of Members of Shutters as specified in SSR Part I, Section 8, Clause 8.24(a) and fitted to Chowkat, complete all as specified and as directed. | BI01010001010000000000000515BI0100001141 | 10 | SQUARE METRE |
| 30 | 1.029 | M&L Second Class Hardwood (well seasoned) Glazed and Skeleton Shutter 30mm thick, Open rebated and prepared to receive Glass, Gauze, etc. (Without Sash Bars), Edges of Framing plain, chamfered or rounded. fitted with cut and mitred Beads for securing glass, etc.; sizes of Members of Shutters as specified in SSR Part I, Section 8, Clause 8.24(a) and fitted to Chowkat, complete all as specified and as directed. | BI01010001010000000000000515BI0100001142 | 16.2 | SQUARE METRE |
| 31 | 1.03 | M&L Taking down Shutter of any description, not exc. 1.0 Square Metre Each and Refixing in the Same Opeing including necessary Resecuring, or Easing & Adjusting, etc., complete all as specified and as directed. | BI01010001010000000000000515BI0100001143 | 8 | PER LEAF |
| 32 | 1.031 | M&L Taking down Shutter of any description, exc. 1.0 Square Metre but not exc. 2.0 Square Metre Each and Refixing in the Same Opeing including necessary Resecuring, or Easing & Adjusting, etc., complete all as specified and as directed | BI01010001010000000000000515BI0100001144 | 1 | PER LEAF |
| 33 | 1.032 | S&F Factory made Solid PVC Door Frame of size 50x47mm made out of 5.0mm thick Plain Colour (Ivory Shade) PVC Sheet reinforced with Mild Steel Square Tube and fixing in opening as per Specification and Drawing of MES Schedule Part-II, complete all as specified and as directed. | BI01010001010000000000000515BI0100001145 | 20.7 | RUNNING METRE |
| 34 | 1.033 | S&F Factory Made Solid PVC Moulded Door Shutter with Particle Board Core 28mm to 30mm thick (Stiles) with 2, 4 or 6 Raised Panel Design with 2.0mm thick Moulded PVC Sheet on the Front Face and 2.0mm Plain Colour PVC Sheet on Back Face, fitted in Frame at Site as per Specifications & Drawings, complete all as specified and as directed. | BI01010001010000000000000515BI0100001146 | 3.12 | SQUARE METRE |
| 35 | 1.034 | M&L Factory Made Solid Panel PVC Door Shutter 30mm thick (Style) Plain colour (Ivory shade) consisting of Frame made out of Mild Steel Tubes for Top and Bottom Rails, Mild Steel Frame shall be covered with heat moulded wood grain PVC ‘C’ Channel having a PVC Sheet Strip of 20mm width stuck inside with Solvent Cement for Stiles and wood grain PVC Sheets for Top Rail, Lock Rail & Bottom Rail on either side and as gap insert for Top Rail & Bottom Rail, Panelling of wood grain PVC Sheet to be fitted in the Mild Steel Frame welded/sealed to the Stiles and Rails with suitable 5mm thick x 15mm wide PVC Sheet beading used inside Stiles and Rails and decorative PVC Beading of 10mmx10mm (90) and jointed together with Solvent Cement and fixing in the Frame at Site, complete all as specified and as directed. | BI01010001010000000000000515BI0100001147 | 4.4 | SQUARE METRE |
| 36 | 1.035 | M&L Anodised Aluminium Powder Coated (Thickness of Powder Coating not less than 50 micron) Frame for Doors, Windows, Ventilators with One or More Rebates including Joining Cleat for fixing, etc., complete all as specified and as directed. | BI01010001010000000000000515BI0100001148 | 19 | KILO-GRAM |
| 37 | 1.036 | M&L Anodised Aluminium Powder Coated (Thickness of Powder Coating not less than 50 micron) Door Shutters, Aluminium Section weighing not less than 0.55 KG/RM including necessary Joining Cleats, Glazing Clips, Rubber/ Neoprene Packing, Handles (as approved) - 2 No. in Each Door, Stainless Steel Hinges of size as ordered, anodised Aluminium Snap Beading, Screws, etc, complete all as specified and as directed. \nNOTE : Prelaminated Particle Boards, Steel Wire Cloth, Sheet Glass, Solar Flim, etc. will be Measured and Paid saperately under appropriate Items, | BI01010001010000000000000515BI0100001149 | 13 | SQUARE METRE |
| 38 | 1.037 | S&F Aluminium anodised Barrel Tower Bolt (as approved), 150mm long, Extruded Section, complete all as specified and as directed. | BI01010001010000000000000515BI0100001150 | 4 | EACH |
| 39 | 1.038 | S&F Aluminium alloy, anodised, Sliding Door Bolt (as approved 300mm long with Hasp, Staple (Bolt type) and Fixing Clips of Sheet, Cast or Extruded Sections and Fixing Bolts and Sliding Bolts of Extruded Sections or Cast-Aluminium alloy and fixed, complete all as specified and as directed. | BI01010001010000000000000515BI0100001151 | 10 | EACH |
| 40 | 1.039 | S&F Stainless Steel Butt Hinge (as approved) 75mm in size, complete all as specified and as directed. | BI01010001010000000000000515BI0100001152 | 72 | EACH |
| 41 | 1.04 | S&F Stainless Steel Butt Hinge (as approved) 100mm in size, complete all as specified and as directed. | BI01010001010000000000000515BI0100001153 | 15 | EACH |
| 42 | 1.041 | S&F Aluminium Handle (as approved) 125mm in size, anodised, Cast type, complete all as specified and as directed. | BI01010001010000000000000515BI0100001154 | 30 | EACH |
| 43 | 1.042 | S&F Aluminium Handle (as approved) 150mm in size, anodised, Cast type, complete all as specified and as directed. | BI01010001010000000000000515BI0100001155 | 16 | EACH |
| 44 | 1.043 | S&F Floor Door Stopper having Overall length of Cover Plate 150mm of Aluminium Alloy Body and Tongue, anodised, with Hard Drawn Steel Spring, fixed in Floor, complete all as specified and as directed. | BI01010001010000000000000515BI0100001156 | 8 | EACH |
| 45 | 1.044 | S&F Door Closer Aluminium alloy (Extruded Section) Body, Hydraulically Regulated, Designation No. 3, Universal type, suitable for Door Shutters of 851mm to 1000mm in Width and of Weight between 61.00 to 80.00 KG, complete all as specified and as directed. | BI01010001010000000000000515BI0100001157 | 8 | EACH |
| 46 | 1.045 | S&F Brass Mortice Lock, Vertical type of size 100mm, 4 Levers, complete all as specified and as directed. | BI01010001010000000000000515BI0100001158 | 8 | EACH |
| 47 | 1.046 | S&F Brass Polished Cupboard Knob 40mm dia, fixed with Nut, Screws and Washer and fixed-in-repairs, complete all as specified and as directed. | BI01010001010000000000000515BI0100001159 | 20 | EACH |
| 48 | 1.047 | S&F Mild Steel 300mm, Ordinary Rat Tail Rod pattern Springs including Roller and Roller Plate, complete all as specified and as directed. | BI01010001010000000000000515BI0100001160 | 8 | EACH |
| 49 | 1.048 | S&F Stainless Steel Drapery Rods (Curtain/Harrison Rails) having 24mm Outer dia and Wall thickness 0.8mm (minimum), fixing with and including Brackets, Stops, Rollers, Side Holders, etc, and Fixed-in-repairs, complete all as specified and as directed. | BI01010001010000000000000515BI0100001161 | 20 | RUNNING METRE |
| 50 | 1.049 | M&L Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples, complete all as specified and as directed. | BI01010001010000000000000515BI0100001162 | 20 | SQUARE METRE |
| 51 | 1.05 | S&F Sheet Glass 3.0mm thick, Plain, Ordinary quality and Glazing with Oil Putty in Square not exc. 0.50 Sqm in Each Pane, complete all as specified and as directed. | BI01010001010000000000000515BI0100001163 | 12 | SQUARE METRE |
| 52 | 1.051 | S&F Sheet Glass 5.5mm thick, Plain, Ordinary quality and Glazing with Oil Putty in Square exc. 0.50 Sqm in Each Pane, complete all as specified and as directed. | BI01010001010000000000000515BI0100001164 | 13 | SQUARE METRE |
| 53 | 1.052 | S&F Solar Control Film 25 Micron Reflective Type Sticked to Glass Panes of any size and thickness as per Instructions of Manufacturers, complete all as specified and as directed. | BI01010001010000000000000515BI0100001165 | 13 | SQUARE METRE |
| 54 | 1.053 | M&L TMT Bars 8.0mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for Columns, hooking Ends and binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed. | BI01010001010000000000000515BI0100001166 | 30 | KILO-GRAM |
| 55 | 1.054 | M&L Mild Steel Bands, Straps, Supports or Stays for Rainwater, Ventilating Pipes including Bolts, Hooks (Stay) for large Gates; Hook and Pintle Hinges: large Hasps and Staples; Hand Made Sliding Bolts; Clamps; Holdfasts; Wall Ties and similar small Articles conforming to Fe-290 Gde-E-165, complete all as specified and as as directed. | BI01010001010000000000000515BI0100001167 | 6.5 | KILO-GRAM |
| 56 | 1.055 | M&L Rolled Mild Steel Sections in Roof Trusses (Framed), Trusses, Purlines, Crane Gantries, Rails and Fastening and Heavy Bracket Framing (Beam, Tee, Angle, Channel or Flat Sections) including Distance Pieces, Cleats, etc, welding or riveted, conforming to Fe-410-W (Gde E-250), Quality B, complete all as specified and as directed. | BI01010001010000000000000515BI0100001168 | 100 | KILO-GRAM |
| 57 | 1.056 | M&L Re-fixing only Galvanised Corrugated Mild Steel Sheeting 0.63mm thick (Serviceable Sheeting obtained from Item No. 1.009 here-in-before), with Two Corrugations Side Lap, fixing with and including New L-type or J-type Cranked Hook Bolts with Washer, etc., complete all as specified and as directed. | BI01010001010000000000000515BI0100001169 | 10 | SQUARE METRE |
| 58 | 1.057 | S&F Plain Mild Steel Sheeting 0.80mm thick, Galvanised @ 120 Gram Per Sqm, in Ridges, Hips, Valley Gutters, etc., fixing with and including L-type or J-type Cranked Hook Bolts with Washer, etc., complete all as specified and as directed. | BI01010001010000000000000515BI0100001170 | 48 | SQUARE METRE |
| 59 | 1.058 | S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Corrugated Steel Sheet 0.50mm thick Coloured, having Tensile Strength of 550 Mpa in Roof Covering, Cladding to Walls, fixed with Aluminum Self Tapping Screws and Aluminum Washers of suitable Size, complete all as specified and as directed. | BI01010001010000000000000515BI0100001171 | 330 | SQUARE METRE |
| 60 | 1.059 | M&L Re-fixing only Pre-painted Galvalume Aluminum Zinc Coating GI based Sheets of any description and in any Sitution (Serviceable Sheets obtained from Item No. 1.009 here-in-before), fixed with Aluminum Self Tapping Screws and Aluminum Washers of suitable Size, complete all as specified and as directed. | BI01010001010000000000000515BI0100001172 | 20 | SQUARE METRE |
| 61 | 1.06 | S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Plain Steel Sheet 0.50mm thick Coloured, having Tensile Strength of 550 Mpa in Ridges/ Roof Covering, Cladding to Walls, fixed with Aluminum Self Tapping Screws and Aluminum Washers of suitable Size, complete all as specified and as directed. | BI01010001010000000000000515BI0100001173 | 35 | SQUARE METRE |
| 62 | 1.061 | S&F Aluminium Snap Grid Frame Work of size 605x605mm in False Ceiling as per Specifications and shown in Drawings with and including Hangers 6.0mm dia GI (upto 1500mm in Length) for adjusting Level, fixed to Roof Slabs by means of Ceilling Cleats made out of GI Flat 40x3.0mm in size, 60mm long and Expansion Hold Fasteners 12.5mm dia, 40mm long, complete all as specified and as directed., complete all as specified and as directed. | BI01010001010000000000000515BI0100001174 | 290 | SQUARE METRE |
| 63 | 1.062 | M&L Exposed Suspended False Ceiling System having Snap Grid/ Frame Work of size 605x605mm with and including Hangers 4.0mm dia GI (upto 1200mm length) for adjusting Level, fixed to Roof Slabs by means of Ceilling Cleats made out of GI Flat 40x3.0mm in size, 60mm long and Expansion Hold Fasteners 12.5mm dia, 40mm long, complete all as specified and as directed. | BI01010001010000000000000515BI0100001175 | 80 | SQUARE METRE |
| 64 | 1.063 | S&F Perforated Particle Board or Tiles 16mm thick and 60x60 Cm in size for Insulation and Accoustic purposes, inserted on Snap Grid Frame Work and fixing with Clips or Staples/Screws, complete all as specified and as directed. | BI01010001010000000000000515BI0100001176 | 290 | SQUARE METRE |
| 65 | 1.064 | S&F HSPC Non-Asbestos Fibre Cement Building Boards 4.0mm thick, Pre-primed, Self Embossed, Textured Designer Boards, Water Resistant, Termite Resistant, Fire Resistant for insulation, fixed or laid/ inserted to Snap Grid Frame Work with Screws, complete all as specified and as directed. | BI01010001010000000000000515BI0100001177 | 80 | SQUARE METRE |
| 66 | 1.065 | S&F Prelaminated Particle Board 25mm thick, Exterior grade, Prelaminated One Side with Decorative Choice Lamination and Other Side Balancing White Lami-nation, fixed with Screws to Timber Frame Work including Providing Decorative Beading on Partitions, Knobs, Drawers and Sliding Shutter with all Fittings, complete all as specified and as directed. | BI01010001010000000000000515BI0100001178 | 20 | SQUARE METRE |
| 67 | 1.066 | M&L Non-skid Ceramic Coloured/Designer Tiles 7.0mm-8.0mm thick (Square/ Rectangular), Area of Each Tile exc. 0.11 Sqm but not exc. 0.18 Sqm (1st quality and/or as approved) in Floors, Jointed in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, laid over and including Cement Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed.\nNOTE : Cost of Cement Screed Bed will deem to include in Quoted Unit Rate. | BI01010001010000000000000515BI0100001179 | 37 | SQUARE METRE |
| 68 | 1.067 | M&L Non-skid Ceramic Coloured/Designer Tiles 7.0mm-8.0mm thick (Square/ Rectangular), Area of Each Tile exc. 0.18 Sqm but not exc. 0.38 Sqm (1st quality and/or as approved) in Floors, Jointed in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, laid over and including Cement Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed.\nNOTE : Cost of Cement Screed Bed will deem to include in Quoted Unit Rate. | BI01010001010000000000000515BI0100001180 | 50 | SQUARE METRE |
| 69 | 1.068 | M&L Non-skid Ceramic Coloured/Designer Tiles 7.0mm-8.0mm thick (Square/ Rectangular), Area of Each Tile exc. 0.18 Sqm but not exc. 0.38 Sqm (1st quality and/or as approved) in Vertical Surfaces i.e. Dado, Skirting, etc., set in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, fixing over and including Cement Screed Bed 10mm thick in Cement Mortar 1:4, complete all as specified and as directed.\nNOTE : Cost of Cement Screed Bed will deem to include in Quoted Unit Rate. | BI01010001010000000000000515BI0100001181 | 10 | SQUARE METRE |
| 70 | 1.069 | M&L Vitrified Ceramic Coloured Tiles, Light Shade, 9.0mm to 10mm thick (Square/ Rectangular), Polished, Area of Each Tile 600x600mm (not exc. 0.36 Sqm) in Floors, Jointed in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, laid over and including Cement Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed.\nNOTE : Cost of Cement Screed Bed will deem to include in Quoted Unit Rate. | BI01010001010000000000000515BI0100001182 | 100 | SQUARE METRE |
| 71 | 1.07 | M&L Vitrified Coloured Tiles, Double Charged, Strain Free, 9.0mm to 10mm thick (Square/ Rectangular), Polished, Area of Each Tile 600x600mm (not exc. 0.36 Sqm) in Floors, Jointed in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, laid over and including Cement Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed.\nNOTE : Cost of Cement Screed Bed will deem to include in Quoted Unit Rate. | BI01010001010000000000000515BI0100001183 | 10 | SQUARE METRE |
| 72 | 1.071 | M&L Vitrified Coloured Tiles, Double Charged, Strain Free, 9.0mm to 10mm thick (Square/ Rectangular), Polished, Area of Each Tile 600x600mm (not exc. 0.36 Sqm) in Vertical Surfaces i.e. Dado, Skirting, etc., set in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, fixing over and including Cement Screed Bed 10mm thick in Cement Mortar 1:4, complete all as specified and as directed.\nNOTE : Cost of Cement Screed Bed will deem to include in Quoted Unit Rate. | BI01010001010000000000000515BI0100001184 | 2 | SQUARE METRE |
| 73 | 1.072 | M&L Glazed Ceramic Coloured Tiles 450x350x6.0mm-7.0mm thick (1st quality and/or as approved) in Vertical Surfaces i.e. Dado, Skirting, etc., set in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, fixing over and including Cement Screed Bed 10mm thick in Cement Mortar 1:4, complete all as specified and as directed.\nNOTE : Cost of Cement Screed Bed will deem to include in Quoted Unit Rate. | BI01010001010000000000000515BI0100001185 | 10 | SQUARE METRE |
| 74 | 1.073 | M&L Marble (Makrana Doogri) Work 18 to 20mm thick, (Table Rubbed and Polished) in Steps, Jambs, Pillars, Window Cills, Cooking Platforms and like in Cement Mortar 1:4 including Pointing in White Cement 1:2, using Marble Dust with Admixture of Pigment to match with Shade of Marble, fixing over and including Cement Screed Bed 15mm thick in Cement Mortar 1:4, complete all as specified and as directed.\nNOTE : Cost of Cement Screed Bed will deem to include in Quoted Unit Rate. | BI01010001010000000000000515BI0100001186 | 6 | SQUARE METRE |
| 75 | 1.074 | M&L Cement Concrete 1:3:6 (40mm graded stone aggregate) 75mm thick in Plinth Protection, etc., Laid in Alternate Panels, finished Concrete Surfaces Even and Smoooth without Using Extra Cement, complete all as specified and as directed. | BI01010001010000000000000515BI0100001187 | 50 | SQUARE METRE |
| 76 | 1.075 | M&L Rendering (Internal) 10mm thick in Cement Mortar 1:6 on Brick/ PCC Blocks or Concrete Works, finished Plastered Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed. | BI01010001010000000000000515BI0100001188 | 170 | SQUARE METRE |
| 77 | 1.076 | M&L Rendering 15mm thick on Brick/PCC Blocks or Concrete Works consist-ing in 2 layers, Backing/Under layer of 10mm thick in Cement Mortar 1:4 and Float/ Top layer 5.0mm thick in Cement Mortar 1:4 including mixeing WPC to Float/ Top layer, finished Fair and Even, complete all as specified and as directed. \nNOTE : Water Proofing Compound (WPC) will be Measured and Paid saperately under appropriate Item, | BI01010001010000000000000515BI0100001189 | 200 | SQUARE METRE |
| 78 | 1.077 | Supply only Water Proofing Compound (as approved), conforming to IS:2645-2003, complete all as specified and as directed. | BI01010001010000000000000515BI0100001190 | 2.62 | KILO-GRAM |
| 79 | 1.078 | M&L Preparing New or Old Plastered Surfaces of Walls, etc. and applying a Layer of Wall Care Putty 3.0mm thick on Cleaned Surfaces including Cutting and Rubbing down to obtain a Even and Smooth Surface, complete all as specified and as directed. | BI01010001010000000000000515BI0100001191 | 270 | SQUARE METRE |
| 80 | 1.079 | M&L Applying Two Coats of Distemper Oil Emulsion (as approved Tint) over a Coat of Chalk Whitening (Priming Coat) on Putty Finished Surfaces of Walls, etc., complete all as specified and as directed. | BI01010001010000000000000515BI0100001192 | 170 | SQUARE METRE |
| 81 | 1.08 | M&L Applying Two Coats of Distemper Oil Emulsion (as approved Tint) on Putty Finished Surfaces of Walls, etc., complete all as specified and as directed. | BI01010001010000000000000515BI0100001193 | 250 | SQUARE METRE |
| 82 | 1.081 | M&L Preparing Newly Plastered Surfaces of Walls and applying Two Coats of Cement Based Paint (as approved Tint) over a coat of Alkali Resistant Priming Paint, complete all as specified and as directed. | BI01010001010000000000000515BI0100001194 | 200 | SQUARE METRE |
| 83 | 1.082 | M&L Preparing Surfaces by Complete Removal of Existing Treatment on Walls and applying Two Coats of Cement Based Paint (as approved Tint), complete all as specified and as directed. | BI01010001010000000000000515BI0100001195 | 90 | SQUARE METRE |
| 84 | 1.083 | M&L Preparing Old Treated Surfaces on Walls and applying One Coat of Cement Based Paint (as approved Tint), complete all as specified and as directed. | BI01010001010000000000000515BI0100001196 | 400 | SQUARE METRE |
| 85 | 1.084 | M&L Preparing New Wooden Surfaces of any description, over 10 Cm in Width or Girth and applying Two Coats of Synthetic Enamel Paint (1st quality/ grade Paint of approved Tint) over a Coat of Pink Primer, complete all as specified and as directed. | BI01010001010000000000000515BI0100001197 | 30 | SQUARE METRE |
| 86 | 1.085 | M&L Preparing Old Painted Wooden Surfaces of any description, over 10 Cm in Width or Girth and applying One Coat of Synthetic Enamel Paint (1st quality/ grade Paint of approved Tint), complete all as specified and as directed. | BI01010001010000000000000515BI0100001198 | 80 | SQUARE METRE |
| 87 | 1.086 | M&L Preparing Steel and Iron Surfaces of any descriptions, over exc. 10 Cm in Width or Girth and applying Two Coats of Synthetic Enamel Paint (1st quality/ grade Paint of approved Tint) over a Coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed. | BI01010001010000000000000515BI0100001199 | 70 | SQUARE METRE |
| 88 | 1.087 | M&L Preparing Old Rusted/Treated Steel and Iron Surfaces of any descriptions, over exc. 10 Cm in Width or Girth and applying Two Coats of Synthetic Enamel Paint (1st quality/ grade Paint of approved Tint), complete all as specified and as directed. | BI01010001010000000000000515BI0100001200 | 50 | SQUARE METRE |
| 89 | 1.088 | M&L Preparing previously Untreated Surfaces of Wood and Wood Based Materials, of any description and girth not otherwise described and treating with Tar or Coal Tar Black Paint to Backs of Chowkats, etc. Area tarred exc. 0.10 Sqm but not exc. 0.50 Sqm Each including Sanding with Clean Sharp Sand after tarred, complete all as specified and as directed. | BI01010001010000000000000515BI0100001201 | 0.2 | HUNDRED NUMBER |
| 90 | 1.089 | M&L Preparing previously Untreated Surfaces of any description and girth not otherwise described and treating with Tar or Coal Tar Black Paint to Holdfast or similar Small Items, Area tarred not exc. 0.10 Sqm Each including Sanding with Clean Sharp Sand after tarred, complete all as specified and as directed. | BI01010001010000000000000515BI0100001202 | 0.4 | HUNDRED NUMBER |
| 91 | 1.09 | S&F Galvanised Steel Tubing 15mm bore (dia), medium grade, conforming to IS-1239 with all Fittings, fixed to Walls, Ceiling or laid in Floors, complete all as specified and as directed. | BI01010001010000000000000515BI0100001203 | 45 | RUNNING METRE |
| 92 | 1.091 | M&L Refixing old Steel Tubing 15mm bore (dia) and Connections (Serviceable Pipes and Connections obtained from Item No. 1.013 here-in-before) in new or old position (Walls, Ceiling, Floors, etc.) including cleaning both inner and outer surfaces of Pipes by using Wire Brush including provision of New GI Fittings/ Connections (as required at Sites), complete all as specified and as directed. | BI01010001010000000000000515BI0100001204 | 5 | RUNNING METRE |
| 93 | 1.092 | S&F Galvanised Steel Tubing 20mm bore (dia), medium grade, conforming to IS-1239 with all Fittings, fixed to Walls, Ceiling or laid in Floors, complete all as specified and as directed. | BI01010001010000000000000515BI0100001205 | 25 | RUNNING METRE |
| 94 | 1.093 | M&L Refixing old Steel Tubing 20mm bore (dia) and Connections (Serviceable Pipes and Connections obtained from Item No. 1.014 here-in-before) in new or old position (Walls, Ceiling, Floors, etc.) including cleaning both inner and outer surfaces of Pipes by using Wire Brush including provision of New GI Fittings/ Connections (as required at Sites), complete all as specified and as directed. | BI01010001010000000000000515BI0100001206 | 5 | RUNNING METRE |
| 95 | 1.094 | S&F Bib Tap 15mm bore (dia), Cast Copper alloy, Chromium plated, screwed down, high pressure, with Crutch or Butter-fly handle, screwed both Ends for Iron Pipe or for Unions and fixed-in-repairs, complete all as specified and as directed. | BI01010001010000000000000515BI0100001207 | 4 | EACH |
| 96 | 1.095 | S&F Pillar Tap 15mm bore (dia), Cast Copper alloy, Chromium Plated, with Capstan Heads, screwed down, high pressure, with or without lettered 'HOT' or 'COLD' with long screwed Shanks and Fly-nuts, screwed for Iron Pipe and fixed-in-repairs, complete all as specified and as directed. | BI01010001010000000000000515BI0100001208 | 2 | EACH |
| 97 | 1.096 | S&F Stop Valve 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type, with Long Shank and Cup Concealed, screwed down, high pressure, with Crutch or Butter-fly handle, screwed both Ends for Iron Pipe or for Unions and Fixed-in-repairs, complete all as specified and as directed. | BI01010001010000000000000515BI0100001209 | 6 | EACH |
| 98 | 1.097 | S&F Gun Metal Globe/Gate Valve 20mm bore (dia) with Iron Wheel Head, screwed both Ends for Iron Pipe and Fixed-in-repairs, complete all as specified and as directed. | BI01010001010000000000000515BI0100001210 | 2 | EACH |
| 99 | 1.098 | M&L Rotational Moulded Polyethene Water Storage Tank 500 Litre Capacity, Cylindrical, Vertical with Closed Top, 3 layered, conforming to IS:12701-1996, hoisted and fixed in Position all as specified in MES Schedule, complete all as specified and as directed. | BI01010001010000000000000515BI0100001211 | 2 | EACH |
| 100 | 1.099 | S&F PTMT Ball Valve 15mm bore (dia), having weight not less than 142 Grams, high pressure with Epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe, complete all as specified and as directed. | BI01010001010000000000000515BI0100001212 | 2 | EACH |
| 101 | 1.1 | M&L Vitreous China White Squatting Pan of size 580x440mm, Orissa Pattern with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan, Cones, India Rubber (nozzles of WC Pan) including Provision of Lime Concrete Bedding and Making Good to Floor/ Distrubed Surfaces, complete all as specified and as directed. | BI01010001010000000000000515BI0100001213 | 1 | EACH SEAT |
| 102 | 1.101 | S&F PVC Flushing Cistern 10 Litre capacity White, Low Level, Valveless, Syphonic Action type with Inlet, Ball Valve, Float and Handle, and PVC Flush Pipe 32mm bore (dia), a pair of Cast Iron Brackets Erecting Stand duly painted including cutting and pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed-in-repairs, complete all as specified and as directed. | BI01010001010000000000000515BI0100001214 | 1 | EACH |
| 103 | 1.102 | S&F Vitreous China White Wash Hand Basin of Size 550x400mm, Flat Back including Brass Chromium Plated Waste Fitting 32mm bore (dia) and PVC Waste Pipe 32mm bore (dia) including a Pair of Cast Iron Brackets Brackets Erecting Stand duly painted including cutting and pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed-in-repairs, complete all as specified and as directed. | BI01010001010000000000000515BI0100001215 | 2 | EACH |
| 104 | 1.103 | S&F Brass Chromium plated Bottle Traps 32mm bore (dia) suitable for Wash Hand Basins with Inlet and Outlet, screwed for Pipe or Connections including necessary Packing, Union, Cap, etc. and fixed-in-repairs, complete all as specified and as directed. | BI01010001010000000000000515BI0100001216 | 2 | EACH |
| 105 | 1.104 | S&F PVC Connection Pipe 15mm in size and 450mm in length with PTMT Nuts and fixed-in-repairs, complete all as specified and as directed. | BI01010001010000000000000515BI0100001217 | 4 | EACH |
| 106 | 1.105 | S&F Looking Mirror size 600x450mm, 5.5mm thick Selected quality Glass, Bevelled edge, mounted on 4.0mm thic PVC Sheet with Aluminium/ PVC/ PTMT Frame, fixed to Wooden Plug with Brass Chromium plated Screws and fixed-in-repairs, complete all as specified and as directed. | BI01010001010000000000000515BI0100001218 | 4 | EACH |
| 107 | 1.106 | S&F Sheet Glass Shelf Assembly consisting of 5.5mm thick Sheet Glass, Shelf 12 Cm Wide with Chromium plated Bracket Guard and Railing 60 Cm long, fixed on Wall with Wooden/ PVC Cleats and Brass Chromoum Plated Screws, complete all as specified and as directed. | BI01010001010000000000000515BI0100001219 | 2 | EACH |
| 108 | 1.107 | S&F Tubular Towel Rail 20mm dia, Brass Chromium Plated, D-type, 60 Cm long between Flanges with Bracket (One Pair), fixed on Wall with Wooden/ PVC Cleats and Brass Chromoum Plated Screws, complete all as specified and as directed. | BI01010001010000000000000515BI0100001220 | 4 | EACH |
| 109 | 1.108 | S&F Vitreous China White Toilet Paper Holder of approved size, Box type, fixed on Walls with Wooden/ PVC Cleats and Brass Chromoum Plated Screws, complete all as specified and as directed. | BI01010001010000000000000515BI0100001221 | 4 | EACH |
| 110 | 1.109 | S&F Cast Iron Floor/Nahani Trap having Outlet Diameter of 50mm with Grating including Jointing to Waste Pipe fixed in Cement Concrete 1:2:4 (20mm graded stone aggregate) and fixed-in-repairs, complete all as specified and as directed. | BI01010001010000000000000515BI0100001222 | 5 | EACH |
| 111 | 1.11 | S&F PVC (SWR) 75mm bore (dia) Pipe, Single Socketed, in any length with Rubber Ring Joints, fixed to Walls or in Floors, complete all as specified and as directed. | BI01010001010000000000000515BI0100001223 | 4 | RUNNING METRE |
| 112 | 1.111 | S&F PVC (SWR) Bend 75mm bore (dia), any radius with Access Door, etc. and jointing with Solvent Cement, complete all as specified and as directed. | BI01010001010000000000000515BI0100001224 | 2 | EACH |
| 113 | 1.112 | M&L Cutting for Removing existing Branch Drain Pipe 150mm bore (dia), Making Good to Walling and Rendering, Cutting out Branch Channel and Making Good Benchings in Cement Concrete 1:2:4 (20mm graded stone aggregate), Smooth Finished and Reforming Benching as required, complete all as specified and as directed. | BI01010001010000000000000515BI0100001225 | 3 | EACH JOB |
| 114 | 2 | E/M SERVICES/WORKS | BI01010001010000000000000515BI0100001226 | ||
| 115 | 2.001 | M&L Taking down carefully Copper/Aluminium Point Wiring (Light, Fan, Socket or Power) complete from in any Position including Fixture and Fittings such as Switches, Ceiling Roses, Pendants, Regulators, Sockets but excluding Light Fittings of any description, Making Good Disturbed Surfaces of Walls/ Ceillings, etc. in Cement Mortar 1:3 including providing Surface Treatment (White/ Colour Washing, Distempering, Painting, etc.) wherever required to match the Existing Finishes, complete all as specified and as directed. | BI01010001010000000000000515BI0100001227 | 100 | PER POINT |
| 116 | 2.002 | M&L Taking down unserviceable Sub-main Wiring from Batten/ Conduit/ PVC Casing Capping of any description, Making Good disturbed surfaces of Walls/ Ceillings, etc. in Cement Mortar 1:3 including providing Surface Treatment (White/Colour Washing, Distempering, Painting, etc.) wherever required to match the Existing Finishes, complete all as specified and as directed. | BI01010001010000000000000515BI0100001228 | 420 | RUNNING METRE |
| 117 | 2.003 | M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable size (approx 25/32/40mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. complete with PVC Board of suitable size for accommodating Switches, Sockets, Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE LIGHT/ FAN POINT controlled by One 1-way Switch 6 Amp, complete all as specified and as directed. | BI01010001010000000000000515BI0100001229 | 68 | PER POINT |
| 118 | 2.004 | M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire for ONE 3/5 PIN SOCKET 6 AMP POINT on SAME BOARD, complete all as specified and as directed. | BI01010001010000000000000515BI0100001230 | 8 | PER POINT |
| 119 | 2.005 | M&L Point Wiring with 2.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 2.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable size (approx 25/32/40mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. complete with PVC Board of suitable size for accommodating Switches, Sockets, Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE 3/5 PIN SOCKET OUTLET 6/16 AMP POINT on INDEPENDENT BOARD, complete all as specified and as directed. | BI01010001010000000000000515BI0100001231 | 8 | PER POINT |
| 120 | 2.006 | M&L Sub-main Wiring with 2-Run of 4.0 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable and 1-Run of 2.5 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuty Conductor drawn through and including PVC Casing Capping (ISI Marked) of suitable size (approx 25/32mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc., complete all as specified and as directed.\nNOTE :-\n(a) Cost of 3-Run of Cables & 1-Run of PVC Casing Capping shall deem to include in the Quoted Unit Rate and the same will be Mesured as ONE UNIT.\n(b) Sub-main Wiring will be measured PVC Conduit only. Wires required for looping, etc. as ordered will deem to be include in the Quoted Unit Rate. | BI01010001010000000000000515BI0100001232 | 360 | RUNNING METRE |
| 121 | 2.007 | M&L Sub-main Wiring with 2-Run of 6.0 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable and 1-Run of 4.0 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuty Conductor drawn through and including PVC Casing Capping (ISI Marked) of suitable size (approx 25/32mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc., complete all as specified and as directed.\nNOTE :-\n(a) Cost of 3-Run of Cables & 1-Run of PVC Casing Capping shall deem to include in the Quoted Unit Rate and the same will be Mesured as ONE UNIT.\n(b) Sub-main Wiring will be measured PVC Conduit only. Wires required for looping, etc. as ordered will deem to be include in the Quoted Unit Rate. | BI01010001010000000000000515BI0100001233 | 60 | RUNNING METRE |
| 122 | 2.008 | S&F PVC Rectangular Block of size 100x100x50mm deep with 3.0mm thick Plastic Laminated Sheet Cover for mounting Swiches, Sockets, Fan Regulators, etc. including Taking down/ out unserviceable PVC Block, complete all as specified and as directed. | BI01010001010000000000000515BI0100001234 | 5 | EACH |
| 123 | 2.009 | S&F Switch Piano 6 Amp, Single Pole, Flush type, 1-way, 230 Volt AC and connecting up, complete all as specified and as directed. | BI01010001010000000000000515BI0100001235 | 76 | EACH |
| 124 | 2.01 | S&F Socket Outlet 6 Amp, 3 Pin, 2-in-1, Flush type, 230 Volt AC and connecting up, complete all as specified and as directed. | BI01010001010000000000000515BI0100001236 | 8 | EACH |
| 125 | 2.011 | S&F Switch Socket Combination 6 Amp, 3 Pin, 2-in-1, Flush type, 230 Volt AC and connecting up, complete all as specified and as directed. | BI01010001010000000000000515BI0100001237 | 16 | EACH |
| 126 | 2.012 | S&F Switch Socket Combination 6/16 Amp, 3 Pin, 2-in-1, Multi Plug, Flush type, 230 Volt AC and connecting up, complete all as specified and as directed. | BI01010001010000000000000515BI0100001238 | 8 | EACH |
| 127 | 2.013 | S&F Lamp Holder PVC/ Polycarbonate type with Back Plate suitable for Batten Fitting and connecting up, complete all as specified and as directed. | BI01010001010000000000000515BI0100001239 | 10 | EACH |
| 128 | 2.014 | S&F Ceiling Rose 65x50mm, 3 Terminals, Surface Bakelite suitable for 230 Volt AC and connecting up, complete all as specified and as directed. | BI01010001010000000000000515BI0100001240 | 46 | EACH |
| 129 | 2.015 | S&F Ceiling Fan Regulator, Dimmer Switch type, 230 Volt AC, Rotary Stepped Electronic, 120/280 Volt including necessary Connection and connecting up, complete all as specified and as directed. | BI01010001010000000000000515BI0100001241 | 6 | EACH |
| 130 | 2.016 | S&F LED Bulk Head e-TATRA Series Light Fitting 1x6.0 Watt having Plastic Housing with Clear Prismatic Diffuser LED 6.0 Watt Lamp and connecting up with and including suitable size Twisted Flexible Copper Conductor Cable including Taking down unserviceable Light Fitting of any description, complete all as specified and as directed.\nMAKE : C&S E-TARTA Series 6W or equivalent Model in Make : BAJAJ/ CG/ HAVELLS/ PHILIPS (as approved by GE). | BI01010001010000000000000515BI0100001242 | 6 | EACH |
| 131 | 2.017 | S&F Decorative Wall Light Fixture, made of Polycarbonate, suitable for 10 Watt LED Bulb and connecting up including Taking down unserviceable Light Fittings of any description, complete all as specified and as directed.\nMAKE : BAJAJ/ CG/ HAVELLS/ PHILIPS (as approved by GE). | BI01010001010000000000000515BI0100001243 | 12 | EACH |
| 132 | 2.018 | S&F Octane LED Panel Squre 18 Watt, connecting up with and including suitable size Twisted Flexible Copper Conductor Cable from Ceiling Rose to Light Fitting including Taking down /out Unserviceable Light Fitting of any description, complete all as specified and as directed.\nMAKE : HAVELLS, OCTANE LED PANEL SQUARE 18W or equivalent Model in Make : BAJAJ/ CG/ C&S/ PHILIPS (as approved by GE). | BI01010001010000000000000515BI0100001244 | 57 | EACH |
| 133 | 2.019 | S&F LED Integrated Batten T-5 Tube Light Fitting 1x20 Watt with LED 20 Watt and connecting up with and including suitable size Twisted Flexible Copper Conductor Cable including Taking down unserviceable Light Fitting of any description, complete all as specified and as directed.\nMAKE : HAVELLS E-LITE PRIDE PLUS 20W or equivalent Model in Make : BAJAJ/ CG/ C&S/ PHILIPS (as approved by GE). | BI01010001010000000000000515BI0100001245 | 34 | EACH |
| 134 | 2.02 | M&L Taking down Ceiling Fan of any Make/Model/Sweep from any Height after disconnecting Electric Connection, dismantling Fan Blades and Keep in Safe Custody for Re-hanging/ Re-fixing and Repairing, complete all as specified and as directed. | BI01010001010000000000000515BI0100001246 | 6 | EACH JOB |
| 135 | 2.021 | M&L Hanging/Fixing only Ceiling Fan (Ceiling Fan obtained from Item No. 2.020 here-in-before), and connecting with and including suitable size Copper Conductor Cable from Ceiling Rose to Connector of the Fan, complete all as specified and as directed. | BI01010001010000000000000515BI0100001247 | 6 | EACH |
| 136 | 2.022 | S&F MCB Single Pole 6 Amp to 32 Amp, 'C' Series, 50 Hz, 10 kA, 240 Volt and Connecting up including Taking down/out unserviceable MCB, complete all as specified and as directed. | BI01010001010000000000000515BI0100001248 | 26 | EACH |
| 137 | 2.023 | S&F MCB Single Pole & Neutral 10 Amp to 32 Amp, 'C' Series, 50 Hz, 10 kA, 240 Volt and Connecting up including Taking down/out unserviceable MCB, complete all as specified and as directed. | BI01010001010000000000000515BI0100001249 | 2 | EACH |
| 138 | 2.024 | S&F MCB Single Pole & Neutral 40 Amp, 'C' Series, 50 Hz, 10 kA, 240 Volt and Connecting up including Taking down/out unserviceable MCB, complete all as specified and as directed. | BI01010001010000000000000515BI0100001250 | 3 | EACH |
| 139 | 2.025 | S&F MCB Distribution Board Sheet Metal Enclosure 4-way, SPN, 240 Volt, Double Doors, Front Openable, fixed Flush with Wall inside the Nitches or Outside on Wall Surface suitable for mounting Isolators & MCBs, suitable for Bus-bar 200 Amp rated capacity and connecting up including Taking down/out unserviceable MCB DB Enclosure, complete all as specified and as directed.\nMAKE : HAVELLS, Cat No. DHDPSHOSRW04 or equivalent Model in Make : LEGRAND/ L&T/ SCHNEIDER (as approved by GE) | BI01010001010000000000000515BI0100001251 | 1 | EACH |
| 140 | 2.026 | S&F MCB Distribution Board Sheet Metal Enclosure 8-way, SPN, 240 Volt, Single Door, Front Openable, fixed Flush with Wall inside the Nitches or Outside on Wall Surface suitable for mounting Isolators & MCBs, suitable for Bus-bar 200 Amp rated capacity and connecting up including Taking down/out unserviceable MCB DB Enclosure, complete all as specified and as directed.\nMAKE : HAVELLS, Cat No. DHDPSHOSRW08 or equivalent Model in Make : LEGRAND/ L&T/ SCHNEIDER (as approved by GE) | BI01010001010000000000000515BI0100001252 | 3 | EACH |
| 141 | 2.027 | S&F MCB Distribution Board Sheet Metal Enclosure 8-way, SPN, 240 Volt, Double Doors, Front Openable, fixed Flush with Wall inside the Nitches or Outside on Wall Surface suitable for mounting Isolators & MCBs, suitable for Bus-bar 200 Amp rated capacity and connecting up including Taking down/out unserviceable MCB DB Enclosure, complete all as specified and as directed.\nMAKE : HAVELLS, Cat No. DHDPSHOSRW08 or equivalent Model in Make : LEGRAND/ L&T/ SCHNEIDER (as approved by GE) | BI01010001010000000000000515BI0100001253 | 1 | EACH |
| 142 | 2.028 | Supply & Laying or Passing through Pipe 1100 Volt grade heavy duty, Cross-sectional area 6.0 Sqmm, 2 Core, Flat or Circular Cable with PVC insulated Aluminium Standed Conductor served with an Inner Sheathing of PVC Tape armoured with Galvanised Steel Wire or Tape and Overall PVC Sheathed in Service Connection suspended by insulating Hangers not more than 1.0 Metre apart including 4.0mm Suspension Wire including Taking down/ out Unserviceable Service Connection, complete all as specified and as directed. | BI01010001010000000000000515BI0100001254 | 85 | RUNNING METRE |
| 143 | 2.029 | Supply & Laying or Passing through Pipe 1100 Volt grade heavy duty, Cross-sectional area 10 Sqmm, 2 Core, Flat or Circular Cable with PVC insulated Aluminium Standed Conductor served with an Inner Sheathing of PVC Tape armoured with Galvanised Steel Wire or Tape and Overall PVC Sheathed in Service Connection suspended by insulating Hangers not more than 1.0 Metre apart including 4.0mm Suspension Wire including Taking down/ out Unserviceable Service Connection, complete all as specified and as directed. | BI01010001010000000000000515BI0100001255 | 160 | RUNNING METRE |
| 144 | 2.03 | S&F LED Street Light Fitting 1x60 Watt, New Generation, Energy Saving, Environmental Friendly, Long Life, Body of Street Light Fitting made up of Pressure Die Cast Aluminium Housing with High Power LED as Light Source with Toughen Glass Top Cover, Top Opening separate Driver Compartment with IP-66 Protection and Impact Resistance IK07 with 10 KV Buili-in Surge Protection Device including Provision of suitable size GI Pipe Bracket, Two sets of Mild Steel Flat Iron 40x5.0mm Clamps, Bracket fixing with suitable size Mild Steel Bolts, Nuts, Washers, etc., and Light Fitting connecting up with suitable size Twisted Flexible Copper Conductor Cable including Taking down unservice -able Light Fitting of any description, complete all as specified and as directed.\nMAKE : HAVELLS, Cat : ENDURAPEARLMAGNUM SL60WLED757PASYTOTG or equivalent in Make : BAJAJ/ CG/ PHILIPS (as approved by GE). | BI01010001010000000000000515BI0100001256 | 6 | EACH |
| 145 | 2.031 | Excavating in Trenches, not exc. 1.50 Metre Wide and not exc. 1.50 Metre in Depth for Taking out/ up and/or laying of Water Pipe Line, Cable Line, etc., Forming surfaces to required Foundation/ Gradient and getting out in Soft/Loose Soil, complete all as specified and as directed. | BI01010001010000000000000515BI0100001257 | 5 | CUBIC METRE |
| 146 | 2.032 | Returning, Filling in including Spreading, Levelling, Watering, Well Ramming in Layers not exc. 25 Cm, Providing Heaps with Surplus Soil along the Route of the Water Pipe Line, Cable Line, etc., in Soft/Loose Soil, complete all as specified and as directed. | BI01010001010000000000000515BI0100001258 | 5 | CUBIC METRE |
| 147 | 2.033 | Supplying, Laying, Commissioning & Testing LT Under Ground Cable 1100 Volt grade, XLPE insulated, PVC sheathed heavy duty, armoured with multi-stranded Aluminium Conductor all as per IS:7098 (Part-I)-1998 having Cross-sectional Area 95 Sqmm, 3½ Core, laid in Trenches, Ducts, Pipes or on Poles, etc., complete all as specified and as directed. \nNOTE : Earth Works, Protection Pipes, Pre-cast Concrete Cable Cover, etc. will be Measured and Paid separately under relevent Items. | BI01010001010000000000000515BI0100001259 | 40 | RUNNING METRE |
| 148 | 2.034 | M&L Sand Cushioning (dry) in Trenches/Ducts for protection of UG Cables (below, above and around the UG Cable laid) of 23 Cm Spread thickness (8 Cm in depth before laying the Cable and 15 Cm in depth after laying the Cable) and consolidated (punned) upto 180mm thickness, complete all as specified and as directed.\nNOTE : For the purpose of Payment, Punned thickness of Sand Cushioning only will be Measured. | BI01010001010000000000000515BI0100001260 | 1 | CUBIC METRE |
| 149 | 2.035 | Supply & Laying Sub-class ‘B’ Bricks, Kiln burnt as Mechnical Protection to Cable with Width Equal to Length of Brick, complete all as specified and as directed. | BI01010001010000000000000515BI0100001261 | 200 | EACH |
| 150 | 2.036 | Supply, Installation & Commissioning LT Panel, Factory Made (CPRI approved Manufacturer), made out of CRCA 14 SWG Sheet, Powder coated, Totally Enclosed, Weather Proof type, Front Opening Shutter with Proper Locking Arrangements, etc. complete and mounted on Mild Steel Angle Iron Frame 40x40x5.0mm (4 No.) not less than 500mm Height from Ground Level duly Painted with Two Coats of Black Enamel Paint over a coat of Red Oxide Zinc Chrome Primer and grouting in Cement Concrete 1:2:4 (20mm graded stone aggregate) Block of size 300x300x450mm including necessary Earthwork, Providng all Electric Connections and Testing, complete all as specified and as directed and Comprising with the following :-\n(a) Aluminium Bus-bar of rating 250 Amp, 4 Strip - 01 Set \n(b) Change Over Switch 250 Amp, 4 Ploe, Online operated - 01 No.\n(c) MCCB 250 Amp, 4 Pole, 36 kA, 430 Volts (Incommer) - 01 No.\n(d) MCB 63 Amp, Single Pole, 16 kA, 415 Volts - 04 No.\n(e) Amperemeter 0-50 Amp, Digital type, with Selector Switch - 01 Set\n and suitable size CTs\n(f) Voltmeter 0-100 Volt, Digital type, with Selector Switch - 01 Set\n(g) Indicator Lamp (RYB) - 01 Set | BI01010001010000000000000515BI0100001262 | 1 | EACH JOB |
| 151 | 2.037 | M&L Earthing with Galvanised Earth Plate Electrode 600x600x6.0mm thick, buried directly in Ground vertically to a depth not less than 2.25 Metre below Ground Level with Top Edge of Earth Plate at depth not less than 1.50 Metre below normal Ground Level, connected to Galvanised Earth Lead Wire 4.0mm dia by means of Bolts, Nuts, Check, Nuts and Washers of Galvanised Iron or Steel and Earth Wire protected with and including GI Pipe 15mm bore (dia) Light grade, connected to Test Point upto 7.50 Metre away from Earth Electrode situated, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc.150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded stone aggregate) and Pre-cast RCC Cover Slab of size 350x350x50mm in Cement Concrete 1:2:4 (20mm graded stone aggregate), reinforced with 10mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, PGI Funnel with GI Watering Pipe 20mm bore (dia) Medium grade including necessary Excavation in Soft/ Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing including Taking down/out unserviceable Earthing of any description, complete all as specified and as directed. | BI01010001010000000000000515BI0100001263 | 5 | EACH SET |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
