Supply Of Furniture At Coe Bundi, Kota-Rajasthan

Supply Of Furniture At Coe Bundi.- Supply And Fixing Of Single Bed Black Colour Size 1975X1008 Mm Bed Metal Frame Materials & Dimensions: N ( Gauge + / - 0.1Mm ) M.S. Pipe 25.4 X50.8X1.2 Thk, M.S. Pipe 19.05X19.05X0.8 Thk.; M.S. Pipe 38.0X0.9Thk; M.S. Pipe Dia 19.05X0.8Thk; M.S. Pipe Dia 15.875X0.8 Thk With Black Power Coatling 50-60 Mlcrons Including 12 Mm Thick Water Proof Is Grade 710 Ply Top With Mattress Size 75X36 Arthomatic Regular Bonded Foam 85 Mm Thick. Denslty 90Gm / Cu / Cm. Fabric Gsm 110 Type Of Fabric Poly Cotton. The Work Shall Be Completed As Per Direction Of Engineer-In-Charge. 40 Each 2 2 Supply And Fixing Of Double Bed Black Colour Size 1975X1617 Mm Bed Metal Frame Materials & Dimensions: ( Gauge + / - 0.1Mm ) M.S. Pipe 50.8X25.4 X1.2 Mm Thk, M.S. Pipe 19.05X19.05X0.8 Thk.; M.S. Pipe Dia 38.0 X0.9 Thk; M.S. Pipe Dia 19.05X0.8Thk; M.S. Pipe Dia 15.875 X0.8 Thk;M.S. Rod D6mm With Black Power Coating 50-60 Mlcrons Including 12 Mm Thick Water Proof Is Grade 710 Ply Top With Mattress Size 75X60 Arthomatic Regular Bonded Foam 85 Mm Thick. Denslty 90Gm / Cu / Cm. Fabric Gsm 110 Type Of Fabric Poly Cotton. The Work Shall Be Completed As Per Direction Of Engineer-In-Charge. N 4 Each 3 3 Supply And Fixing Of Bed Side Table Size 440X510x450mm Body And Drawer Panels Of Bed Side Table Are Made Of 18Mm Thick Prelaminated Pratice Borad. All The Exposed Edges Are Edge Banded With 0.8Mm Thick Pvc Edge Banding . Side Panels Are Made Of 18 Mm Thick Prelaminatd Pratice Board With Imported H.D.F. Foil Wrapped Decorative Trim Fixed On To It With The High Quality Hardware Used Like Roller Sildes, Hinges, Minifix Dowels Is Of Make Hettick The Owkr. The Work Shall Be Completed As Per Direction Of Engineer-In-Charge. 50 Each 4 4 Supply And Fixing Of Canteen Chair With The Powder Coated Tublur Frame Of Statz Chair Is Made Of Dia 16 Mm, 2 Mm Thick Ms Erw Tube And 10 Mm Dia Rods As Conecting Members The Sheet Made Of Enjection Moulded Ploypropylene And Are Fixed Tublur Frame With Self Tapping Screw. The Seat And Back Are Avaible In 3 Colours Pink, Blue, Green Back Size ( For Slatz ) 35Cm ( W ) X 24.5 Cm ( H ) Seat Size ( For Slatz ) 47.00Cm ( W ) X 43.00 Cm ( D ) The Shoes Are Made Of Nylon And Fixed With Bottom Side Of The Tublur Frame With Self Tapping Screw. The Work Shall Be Completed As Per Direction Of Engineer-In-Charge. 25 Each 5 5 Supply And Fixing Of Canteen Table 894Mm Dia X 750Mm Height Tops Made From 25Mm Thick Plb With 0.4Mm Thick Membrane Foil. Ms Erw Tube Connecting Top Support And Base. Made From Ms U Bracket ( 3 Nos ) Welded To 63.5Mm Dia X 1.6Mm Thick Ms Screw Tube. This Is Fixed On Top Of The Leg Tubeusing M12 Bolt. The Top Support Is Fixed To The Wooden Top Using Self Tapping Screw. Powder Coated ( Avg. Thick 40 Micron ) Made From Ms Erw Tubes, Formed At One And Welded At Other Wirth Ms Erw Tube. This Fixed As The Bottom Of The Leg Tube Using M12 Bolt. Heigth Adjustment Facility Has Been Provided Over All ( Thick 0.2-0.5 Mrcron ) Over Fixed Plating ( Thick 10-15 Micron ) . The Work Shall Be Completed As Per Direction Of Engineer-In-Charge. 4 Each 6 6 Tables- Nsupplying And Fixing Of Conference Table Top Made Out With 25 Mm Thick Fseb Isi Partical Board And Rest 28 Mm Thick Flat Edge Dully Sealed With Pvc Edge Bending Of Matching Colour And Pvc Wire Holder ( Size 24X24x30 ) Per Seat . 50 Per Seat 7 7 Providing And Placing In Position Center Tables Od Size 1200X600x450 With 40Mm Teakwood Legs 62.5X35mm Teak Frame At Top With Inlay Works As Detailed Including Polished And 10Mm Beveled Brown Glass On Top. The Work Shall Be Completed As Per Drawing And Direction Of Engineer-In-Charge. 3 Each 8 8 Visitor Chair Size ( 61.4 Cm W X 64.5 Cm D X 89.5 Cm H ) Nseat Size ( 47 Cm W X 48 Cm D ) , Seat And Back Are Made Up Of 1.2+ 0.1 Cm Thick Hot Pressed Plywood And Uphold Stered With Fabric Upholstery Covers And Moulded Polyurethane Foam. The Back Foam Is Designed With Contoured Lumber Support For Extra Comfort. The Hr Polyurethane Foam Is Moulded With Density = 45+2 Kg / M And Hardness Load 16+2 Kgf As Per Is 7888 For 25% Compression. One Piece Arm Rests Are Injection Moulded From Back Co-Polymer Polypropylene. The Power Powder Coated ( Dft. 40-60 Microns ) Tubular Frame Is Cantilever Type And Made Of 254+0.03 Cm X 0.2 +0.016 Cm Thick M.S. Erw Tube. The Work Shall Be Completed As Per Drawing And Direction Of Engineer-In-Charge. Godrej, Or Equivalent Make N 25 Each 9 9 High Back Revolving Chair ( Size 76 Cm ( W ) X76cm ( D ) X101.5 To 117.5 ( H ) With Sheet Hieght 46.5 To 55.5 Cm ) Nthe Seat Is Made Up Of 1.2+0.1Cm. Thick Hot Pressed Plywood And Upholstered With Fabric Or Synthetic Leather And Moulded Polyurethane Foam. The Back Is Made Up 1.2+0.1 Cm Thick Hot Pressed Plywood Upholstered With Replaceable Babric Or Synthetic Leather Upholstery Covers And Moulded Ployurethane Foam. The Back Ply And Foam Is Designed With Contoured Lumber Support For Comfortable Seating Posture. The Hr Polyurethane Foam For Seat And Back Is Moulded With Density 45+ / -2 Kg / Cum And Hardness Load 16+2 Kgf As Per Is 7888 For 25% Compression. The Armrest Top Is Made Of Moulded Polyurethane ( P.U. ) And Mounted On To A Drop Lift Height Adjustable Type M.S. Tubular Armrest Support Chrome Plated. The Armrest Height Is Adjustable Upto 6.5+0.5 Cm. In 5 Steps & Also Has Swivel Adjustment Of 22 +2 Degree On Both Sides. The Chair Should Have 360 Degree Revolving Type With Single Point Control, Sheet Back Tilting Ratio Should Be 1:2 And Seat Depth Adjustment Of 6.0+0.5 Cm Can Be Locked In 6 Position. The Backrest Consists Of A Sliding Up Down Mechanism, Which Can Be Adjusted In The Range Of 7.5+0.5 Cm And Can Be Locked In 4 Positions. The Twin Wheel Castors Are Injection Moulded In Black Nylon. The Work Shall Be Completed As Per Drawing And Direction Of Engineer-In-Charge. Godrej, Or Equivalent Make N 7 Each 10 10 Mid Back Chair Size ( 76.3 Cm W X 76.3 Cm D X 85.5 To 97.5 Cm H ) Nmid Back Size 47.5 Cm ( W ) X 58 Cm ( H ) , Seat And Back Are Made Up Of 1.2+ 0.1 Cm Thick Hot Pressed Plywood And Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam. The Back Foam Is Designed With Contoured Lumber Support For Extra Comfort. The Hr Polyurethane Foam Is Moulded With Density = 45+2 Kg / M And Hardness Load 16+2 Kgf As Per Is 7888 For 25% Compression. One Piece Arm Rests Are Injection Moulded From Back Co-Polymer Polypropylene. Chair Should Have Centre Tilt Synchro Mechanism. The Mechanism Is Designed With The Following Features. 3600 Revolving Type Upright Position Locking, Tilt Tension Adjustment Seat / Back Tilting Ratio 1:3. The Pneumatic Height Adjustment Has An Adjustment Stroke Of 12.0+0.3 Cm. The Bellow Is 03 Piece Telescopic Type And Injunction Moulded In Black Polypropylene Pedestal Assembly- The Pedestal Is Injection Moulded In Black 33% Glass Filled Nylon-66 And Fitted With 05 Nos. Twin Wheel Castors. The Pedestal Is 66.3+0.5 Cm Pitch Centre Dia ( 76.3 +1.0 Cm With Castors ) . The Twin Wheel Castors Are Injection Moulded In Black Nylon. The Work Shall Be Completed As Per Drawing And Direction Of Engineer-In-Charge. Godrej, Or Equivalent Make N 50 Each 11 11 Executive Table With Eru And Pedestal ( Size 6X3 ) Nsupply Of Executive Table With Eru And Pedestal Size 1500X750x740 Mm With Top And Side Panel 25 Mm Thick Plain Particle Board Clad With 0.6 Mm Thick Post Formed Laminated And 1 Mm Thick Backing Laminated. Flat Edge Duly Sealed With 2 Mm Thick Pvc Beading. Neru ( Extended Return Unit ) Left Hand Side Should Have Size 1050X450x705 Mm Top And, Top And Side Panel 25 Mm Thick Plain Particle Board Clad With 0.6 Mm Thick Post Formed Laminated And 1 Mm Thick Backing Laminated. Flat Edge Duly Sealed With 2 Mm Thick Pvc Beading, Modesty 18 Mm Thick Plain Particle Board Clad With 1 Mm Thick Decorative Laminated On Both Sides Edge Sealed With 2 Mm Thick Pvc Bidding. Pedestal:- Three Drawer Pedestal Made Of 25 Mm Thick + 1 Mm Particle Board Clad With Decorative Post Formed Laminated On Top, Sides & Balancing Laminated On Bottom Side. Post Forming Edge At The Front Side. Other Panels Made Of 18 Mm Thick ( + 1Mm ) Pre Laminated Particle Board, Handles – Metal Handle Are Provided On The Shutter Door At 128 Mm Cd. Table Should Have 10 Mm Thick As Molded Glass On Top With Fibre Sheet The Work Shall Be Completed As Per Drawing And Direction Of Engineer-In-Charge. Godrej, Or Equivalent Make N 3 Each 12 12 Supplying Of Steel Three Seater Bench / Chair With Arm And Back Rest, Seat And Back Made With Perforated Jali Heavy Frame With Armrest. Over All Length 1760Mm, Depth 550Mm, Height 500Mm, Seat Height From Floor 425Mm, Material Of Main Frame Is Mild Steel, Material Of Legs And Arms Made Up Of Powder Coated High Presure, Aluminum Dye Cast.The Work Shall Be Completed As Per Drawing And Direction Of Engineer-In-Charge. 3 Each

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	03-05-2021	Date Ext.	Date	19-05-2021
2	13-04-2021	Date ext	Date	23-04-2021
3	20-05-2021	Dt Ext	Date	07-06-2021
4	22-04-2021	Date extn	Date	04-05-2021

INR 500 /-

Refer document

INR 21.23 Lakhs /-