| 1 | 1 | Rubber Flooring \nSize: -10 mm Rubberized flooring scores high on slip resistance, saving the user from slips & falls during workouts Durability. Strong durable and tough to with stand the harfest possible impact Flooring surface are seamless and assure high performance Smell. It is odourless Quality: - Eco-friendly- Made of 100% Recycled tires and scrap rubber. Conforms to safety standard - Conforms to impact attenuation test of ASTMF1292/EN1177 Impact Absorbent- Protection against the range of critical fall height covered. Static Resistant - Reduces static shocks on dry winters Easy cleaning- Residents to water and dust. Sound Absorbent- Reduces the impact of sound transmission from football noises and more\n | BI01010001010000000000000515BI0100001113 | 80 | Sqm |
|---|
| 2 | 2 | Providing and fixing mirror of superior glass 6mm thick of approved make such as Saint Gobain, Modi Guard, Asahi or equivalent with bevelled edges of approved quality and of required shape and size of approved quality and shade with 6mm thick hard board cacking including fixing mirror with silicon, sealant all around & making holes in mirror & fixing glazing knobs etc. complete as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001114 | 19 | Sqm |
|---|
| 3 | 3 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : Powder coated aluminium (minimum thickness of powder coating 50 micron) | BI01010001010000000000000515BI0100001115 | 200 | kg |
|---|
| 4 | 4 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin-charge. Pre-laminated particle board with decorative lamination on both sides | BI01010001010000000000000515BI0100001116 | 15 | Sqm |
|---|
| 5 | 5 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.\n(Cost of aluminium snap beading shall be paid in basic item):\nWith float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm) \n | BI01010001010000000000000515BI0100001117 | 25 | Sqm |
|---|
| 6 | 6 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade:\nNew work (two or more coats) over and including water thinnable priming coat with cement primer \n | BI01010001010000000000000515BI0100001118 | 200 | Sqm |
|---|
| 7 | 7 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C | BI01010001010000000000000515BI0100001119 | 4 | Point |
|---|
| 8 | 8 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required 2 X 6 sq. mm + 1 X 6 sq. mm earth wire | BI01010001010000000000000515BI0100001120 | 200 | Mtr |
|---|
| 9 | 9 | Supplying and fixing of following ways surface/ recess\nmounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)\n8 way (4 + 24), Double door | BI01010001010000000000000515BI0100001121 | 1 | Each |
|---|
| 10 | 10 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole | BI01010001010000000000000515BI0100001122 | 24 | Each |
|---|
| 11 | 11 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 100 A, 16 KA,TPMCCB | BI01010001010000000000000515BI0100001123 | 1 | Each |
|---|
| 12 | 12 | Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, \"C\" curve including connections, painting etc. as required. (make :- North west /norysis/grabtree/roma) | BI01010001010000000000000515BI0100001124 | 20 | Each |
|---|
| 13 | 13 | SITC of 36 watt energy efficiency recessed mounted LED luminaries suitable for 2 x 2 grid ceiling of one colors white in combination with profiled and flat diffuser : Lumen Output of 3300 lumens available in 4000 K & 5000 K color temperature constraint current electronic driver complete with all accessories i/c connection with 1.5 sq. mm PVC copper conductor single core cable & earthing etc. as reqd. (Bajaj make model no BCTBLR 39WATN NW / Wipro/Crompton /GE/ Philips/ Twinkle) | BI01010001010000000000000515BI0100001125 | 12 | Each |
|---|
| 14 | 14 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.\n4 X 10 sq. mm + 2 X 6 sq. mm earth wire \n | BI01010001010000000000000515BI0100001126 | 50 | Meter |
|---|
