Agartala Municipality Corporation has published Repair Of Two Nos Awc And Bus Stand At Verious Spot Under Ward No.42, Amc.. Submission Date for this Tender is 03-04-2021. Building Repair Tenders in Ward No-42 ,AMC Tripura. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan ) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. All kinds of soil. |
2 | Supply and filling in plinth under floor foundations etc. with sand( fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or any suitable method complete. |
3 | Proviiding and laying in position CC of specified grade excluding the cost of shuttering- All work upto plinth level 1:3:6 (1 cement: 3 fine sand: 6 graded well burnt brick aggregate 20 mm nominal size). |
4 | First class brick work in foundation & plinth including cost of all materiuals as required complete in cement mortar 1:4( 1 cement : 4 fine sand) |
5 | Providing & laying in position cement concrete of specified grade excluding the cost of centering & shuttering 1:2:4 (1 cement: 2 fine sand: 4 graded well burnt brick aggregate of 20 mm nominal size). |
6 | 12 mm cement plaster in cement mortar 1:4 (1 cement: 4 fine sand) including neat cement punning. |
7 | Steel work in built up tubular (round square or rectengular hollow tubes etc.) trusses etc. including cutting, hoisting, fixing in position & applying a printing coatof approved steel primere including welding & bolted with special shaped washers etc. complete. Hot finished welded type tubes. |
8 | Steel work welded in built up section /framed work including cutting, hoisting fixing in position & applying a priming coat of approved steel primer using steel etc. complete as required. In grating frames, geord bar, ralling brakets, gates & similar works all complete. |
9 | Providing & fixing hard drawn steel wire fabric 75X25 mm mesh of weight not less than 7.75 kg. per sq. mtr. To window frames etc. including 62X 19 mm beading of gamai wood. |
10 | Providing corrugated G.S. sheet roafing including vertical /curved surface fiixed with polymer coated J or L hooks, bolts & nuts 8 mm diameter with bitumen & G.I. limpet washes or with G.I limpet washers filled with white lead & including a coat of approved steel primer & two coat of approved point on over lapping of sheets complete (up to any pitch in horizontal /vertical of curved surface) excluding the cost of perline, rafters & trosses & including cutting to size & shape whereever required 0.63 mm thich with zinc coating not less than 275 gm/m2 |
11 | Providing ridges or hips of width 60 cm overall width plain G.S. Sheet fixed with polymer coated J or L hooks, bolts, & nuts 8 mm dia G.I. limpet & bitumen washers complete, 0.63 mm thick with zinc coating not less than 275 gm /m2 |
12 | Providing wood work in frames of false ceiling, aprtition etc. sawn & put up in position. Soft wood. |
13 | Providing & fixing plain Multipurpose cement board (high pressure stear wood) as per IS: 14862:2000 with suitable screw for fibre cement board in ceiling etc. complete (frame work to be paid separately) 6 mm thick cement board. |
14 | Centering, shuttering including strutting propping etc. & removal of form work for foundation roofings, bases for column etc. for mass concrete with timber plank. |
15 | Reinforcement for RCC work including straightening, cutting, bending, placing in position & binding all complete up to plinth level thermo- mechanically trated bars of grade Fe-5000 or more. |
16 | Providing & laying in position specified grade of reinforced cement concrete ixcluding the cost of centering, shuttering, finishing & reinforcement 1:2:4 ( 1 cement: 2 fine sand: 6 graded well burnt brick aggregate) |
17 | Providing & fixing 1st quantity ceramic glazed wall tiles (minimum 200X300) conforming to IS15622-2017 (thickness to be specified by the manufacture) of approved make in all colours shades of any size as approved by Engineer-in charge in skirting rises of staps and laid over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 fine sand) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete. |
18 | Providing and fixing precast chequre cement concrete tiles 18 mm thick laid in footpath and coatyard on 20 mm thick bed of cement mortor 1:4(1 cement:4 fine sand) jointed with neat cement slurry including rubbing and clearing complete as per direction of the Engineer-in-charge. |
19 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necssary repairs to scratehes etc. complete. |
20 | Distempering with oil bound washable distemper of approved brand and amnufacture and of required shade on old work (one or more coats) to give an even shade as required complete as per direction of the Engineer-in-charge. |
21 | Finishing walls with water proofing cement paint of required shade of approved brand and manufacture on old work (one or more coats) including preparation of surface asrequired completed as per direction of the Engineer-in-charge. |
22 | Applying priming coat (payment shall be made submission of test certificate issued by the manufacture) with ready mixed pink or grey primer of approved brand and manufacture on wood work. |
23 | Painting with oil type wood presovative of approved brand and manufacture (one or more coats) |
24 | Creation/painting of logo of(3Nos) using weather coat paint as per direction of Engineer-in-charge(Approved Rate/ planing Division. |
25 | Finishing with Epoxy paint (two or more coats) of approved brand it manufacture at all locations prepared and applied as per manufacture specification including appropiate priming coat preparation of surface etc. complete on steel work. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail