Military Engineer Services-MES has published Repairs To Flooring , Roofing , Sanitary Fittings , Plastering , Plinth Protection , Ceiling , Cleaning Of Water Tank , Necessary Plumbing With Fittings And Other Misc B/R Works At Cqa ( I ) Residential And Technical Area Raipur Dehradun Under Ge . Submission Date for this Tender is 12-04-2021. Shed Construction Tenders in GE (I) (P) FY KANPUR Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 05-Apr-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 12-04-2021 |
| Name of Work: Repairs to flooring, roofing, sanitary fittings, plastering, plinth protection, ceiling, cleaning of water tank, necessary plumbing with fittings and other misc B/R works at CQA(I) residential and technical area raipur Dehradun under GE (I)(P)(FY) Kanpur. | |||||
|---|---|---|---|---|---|
| Sl. No. | Description of item | Item Code / Make | Quantity | Unit | |
| 1 | 1 | Dismantling asbestos cement (corrugated ted, semi corrugated, etc.) sheets in roof coverings & ridge etc. | 140 | Sqm | |
| 2 | 2 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. | 130 | Sqm | |
| 3 | 3 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. | 10 | Sqm | |
| 4 | 4 | Demolition wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets. | 60 | Sqm | |
| 5 | 5 | S&F 4 mm thick asbestos cement plain building boards, fixed to timber framework with screws | 50 | Sqm | |
| 6 | 6 | M & L clean sawn second class hard-wood for framed and fixed as in scantlings. | 0.2 | Cum | |
| 7 | 7 | M & L 12 mm prelaminatd particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work to wall complete all as specified and directed. | 10 | Sqm | |
| 8 | 8 | Taking down steel chowkhats or frames not exc 1.5 Sqm each double type (without taking off shutters from the frames) complete all as specified and as directed. | 15 | Each | |
| 9 | 9 | Taking down frame with shutter (without taking of shutter from the frame) area exc 1.5 sqm but not exc 4.00 sqm. | 22 | Each | |
| 10 | 10 | Taking down shutter of any description exc 1.00 sqm but not exc 2.00 sqm each | 18 | Each leaf | |
| 11 | 11 | Taking down shutter of any description not exc 1.00 sqm each | 8 | Each leaf | |
| 12 | 12 | M&L for Solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profile reinforced with MS square tube, supplying & fixing in opening as per specification and drawing . | 20 | RM | |
| 13 | 13 | S&F for Factory made solid PVC moulded door shutter,28 to 30mm thick (stile),with particle board core, with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face 7 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification and drawing , complete all as specified. | 14 | Sqm | |
| 14 | 14 | M&L for french polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works complete all as specified and directed. | 30 | Sqm | |
| 15 | 15 | S&F cast iron body, door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed | 3 | Each | |
| 16 | 16 | S&F 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed | 0.1 | Cum | |
| 17 | 17 | M&L for 105 x 60 mm of frame size of pressed steel frames for doors with one or more rebates including necessary fixing lugs, 03 nos hinges, lock strike plate, etc., complete, as specified, supplied and fixed | 30 | RM | |
| 18 | 18 | M&L for 125 x 60 mm of frame size of pressed steel frames for doors with one or more rebates including necessary fixing lugs, 06 nos hinges, lock strike plate, etc., complete, as specified, supplied and fixed | 25 | RM | |
| 19 | 19 | Taking down and refixing in same opening after easing or resecuring shutters of any description exc 1 sqm and not exc 2 sqm each. | 270 | Each | |
| 20 | 20 | Easing or resecuring, adjusting without taking down shutters from the frame of any description exc 1 sqm and not exc 2 sqm each. | 230 | Each | |
| 21 | 21 | S&F factory made 30 mm thick 2nd class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats | 4 | Sqm | |
| 22 | 22 | S&F factory made 35 mm thick 2nd class hardwood plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated\n | 30 | Sqm | |
| 23 | 23 | S&F factory made 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) | 18 | Sqm | |
| 24 | 24 | S&F factory made 30 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) | 5 | Sqm | |
| 25 | 25 | S&F 30 mm thick 2nd class hardwwod flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides | 2 | Sqm | |
| 26 | 26 | S&F 100 mm long aluminium anodised barrel tower bolt of extruded section. | 9 | Each | |
| 27 | 27 | S&F 150 mm long aluminium anodised barrel tower bolt of extruded section. | 34 | Each | |
| 28 | 28 | S&F 200 mm long aluminium anodised barrel tower bolt of extruded section. | 10 | Each | |
| 29 | 29 | S&F 150 mm long aluminium anodised handle of extruded section. | 34 | Each | |
| 30 | 30 | S&F 100 mm long aluminium anodised handle of extruded section. | 10 | Each | |
| 31 | 31 | S&F 300 mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolt of extruded section or cast type aluminium alloy. | 10 | Each | |
| 32 | 32 | S&F floor door stoper (140 mm long) of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete. | 10 | Each | |
| 33 | 33 | S&F 100 mm long butt hinges, medium weight, cold rolled mild steel. | 18 | Each | |
| 34 | 34 | Taking down old wooden pelmet of any description complete and S&F drapery rod 32 mm dia, high strength aluminium rod with powder coated paint of thickness 40/60 microne of wood finish with minimum 12 rings in each metre length of rod of ABS plastic in matching colour & installations brackets of galvanised steel powder coated paint in matching colour with all accessories complete all as specified and directed. Note : bracket shall be measured separately. | 60 | RM | |
| 35 | 35 | S&F in repair bracket for 32mm dia aluminium rod powder coated same matching fixed to wall end (side cap) all as specified as directed. | 90 | Each | |
| 36 | 36 | S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples | 10 | Sqm | |
| 37 | 37 | Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing nd fixing new ones. | 30 | Sqm | |
| 38 | 38 | S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane | 22 | Sqm | |
| 39 | 39 | S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane | 4 | Sqm | |
| 40 | 40 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads | 8 | Sqm | |
| 41 | 41 | S&F 4 mm thick sheet glass, ordinary quality and glazing with wooden beding square/ trangular in size n exc 0.5 sq. m in each pane | 4 | Sqm | |
| 42 | 42 | S&F 4 mm thick sheet glass, ordinary quality and glazing with wooden beding square/ trangular in size exc 0.5 sq. m in each pane | 2 | Sqm | |
| 43 | 43 | S&F 3 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane | 2 | Sqm | |
| 44 | 44 | M&L for plain fillets. square, rectangular or triangular in section, not exc 3 sqcm in section, clean sawn, se-cured with nails or brads. | 20 | RM | |
| 45 | 45 | M&L for plain fillets. square, rectangular or triangular in section, exc 3 sqcm but not exc 6sqcm in section, clean sawn, se-cured with nails or brads. | 30 | RM | |
| 46 | 46 | S&F 4.80 mm thick sheet glass, ordinary quality in square rectangular sec exc 0.5 sq. m in each pane, fixed to aluminium door/window/partition etc all as specified as directed. | 8 | Sqm | |
| 47 | 47 | M&L for fixed and repair for prelaminated partical board of 18/19 mm thick interior grade prelaminated one side with decorative choise lamination and other side white laminationed fixed with frame work screwes as in shutters cabinate of kitchen, shelfs etc. including wooden beadding complete all as specified and as directed. | 15 | Sqm | |
| 48 | 48 | S&F steel window with side hung shutter including projecting type hinges with steel handle and steel peg stay, complete with glazing bars dovetailed or welded complete all as specified as directed. | 8 | Sqm | |
| 49 | 49 | S&F steel window with side hung shutter including projecting type hinges with steel handle and steel peg stay, complete without glazing bars dovetailed or welded complete all as specified as directed. | 8 | Sqm | |
| 50 | 50 | S&F steel ventiletor with fixed type to receive glass on the bottum portion and to receive gauze on the upper side portion complete all as specified as directed. | 6 | Sqm | |
| 51 | 51 | S&F for frame work such as grill, gratings, etc. with ends of bar shouldered and/or riveted or forged in to spikes, framed guard bars nareeed iron door ladders framed balusters and similar work conforming to FE 290 gde E 165 all as specified as directed. | 80 | Kgs | |
| 52 | 52 | S&F in repair anodised aluminium snap grid frame work for false ceiling, size of grid 605 x 605 mm with main, cross (T) tee sec size 25x25, 1.6 mm thick and wall angle (L) size 25x25, 1.6 mm thick fixed to concrete/brick/wooden/steel using adjustable comprising of GI wire all as specified and as directed. | 80 | Sqm | |
| 53 | 53 | M&L for perforated particle board/tiles 12 mm thick for insulation and accoustic purpose 600 x 600 mm in size fixed with screws or staple with aluminium grid. All as specified and as directed. | 10 | Sqm | |
| 54 | 54 | Taking down and refixng the same steel gate not exc 3.00 sqm each pane after repair of rusted or damged portion of the gate including pivate, holdfast, stoper, locking arregment, pintal etc.. and necessary gressing to pivate, with or including spot welding, runing welding all as specified as directed. Note: New mild steel fixed with replacing rusted or damaged portion will be measured separatly. | 12 | Each | |
| 55 | 55 | Taking down and refixng the same steel gate not exc 3.00 but not exc 5.00 sqm each pane after repair of rusted or damged portion of the gate including pivate, holdfast, stoper, locking arregment, pintal etc.. and necessary gressing to pivate, with or including spot welding, runing welding all as specified as directed. Note: New mild steel fixed with replacing rusted or damaged portion will be measured separatly. | 3 | Each | |
| 56 | 56 | S&F 1.25mm Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required | 6 | Sqm | |
| 57 | 57 | S&F in repair galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples | 40 | Sqm | |
| 58 | 58 | S&F hasp and staple 100 mm long aluminium anodised fixed with screws. | 20 | Each | |
| 59 | 59 | S&F continous piano hinges, mild steel, bright finished or electrogalvanised width of flap 30 mm. | 20 | RM | |
| 60 | 60 | S&F in repair 40 mm dia cupboard knob fixed with nuts screws and washer of brass polished of approved quality. | 20 | Each | |
| 61 | 61 | S&F in repair 150 mm long anuminium anodised barrel tower bolt of extruded section. | 30 | Each | |
| 62 | 62 | S&F in repair 200 mm long anuminium anodised barrel tower bolt of extruded section. | 30 | Each | |
| 63 | 63 | S&F in repair 150 mm long anuminium anodised handle of extruded section. | 25 | Each | |
| 64 | 64 | S&F in repair 300 mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolt of extruded section or cast type aluminium alloy. | 20 | Each | |
| 65 | 65 | S&F in repair floor door stoper (140 mm long) of aluminium alloy body complete. | 20 | Each | |
| 66 | 66 | S&F in repair mild steel ordinary rat tail rod spring 300mm long with rod pattern spring including roller and roller plate complete. | 30 | Each | |
| 67 | 67 | M&L Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165. | 15 | Kgs | |
| 68 | 68 | M&L for preparation of old painted wooden surface of any description, not otherwise described over 10 cm width or grith applying a coat of synthetic enamel paint. | 80 | Sqm | |
| 69 | 69 | M&L for preparation of untreated wooden surface of any description, not otherwise described over 10 cm width or grith applying two coat of synthetic enamel paint over and after priming coat. | 180 | Sqm | |
| 70 | 70 | M&L for preparation of old painted steel surface of any description, not otherwise described over 10 cm width or grith applying a coat of synthetic enamel paint. | 80 | Sqm | |
| 71 | 71 | M&L for preparation of untreated steel surface of any description, not otherwise described over 10 cm width or grith applying two coat of synthetic enamel paint over and after priming coat. | 30 | Sqm | |
| 72 | 72 | M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash on concrete surface of ceiling. | 25 | Sqm | |
| 73 | 73 | M&L for preparation of new plastered surfaces and applying two coats of distemper oil emulsion over andafter preparation and a priming coat on walls, pillars cornices complete. | 30 | Sqm | |
| 74 | 74 | M&L for preparation of new plastered surfaces of wall and applying three coats of white wash. | 30 | Sqm | |
| 75 | 75 | M&L for preparation of old decorated plastered/un plastered surfaces of walls, pillars cornices etc, and applying one coat of oil bound distemper on the walls pillars, cornices etc. | 50 | Sqm | |
| 76 | 76 | M&L for preparation of new undecorated plastered/un plastered surfaces of walls, pillars cornices etc, and applying two coat of cement base paint on the walls pillars, cornices etc. | 130 | Sqm | |
| 77 | 77 | M&L for preparation of new undecorated plastered/un plastered surfaces of walls, pillars cornices etc, and applying two coat of colour wash on the walls pillars, cornices etc. | 30 | Sqm | |
| 78 | 78 | M&L for preparation of new undecorated plastered/un plastered surfaces of walls, pillars cornices etc, and applying two coat of exterior emulsion over and after a coat of primer and filling uneven surface birla with putty on the walls pillars, cornices etc. | 80 | Sqm | |
| 79 | 79 | Demolition of cement concrete(unreinforced) of any description and in any position not otherwise specifically, including removing of old demolised material from site. | 10 | Cum | |
| 80 | 80 | M&L for rendring 15 mm thick in CM 1:3 on brick work or concrete surfaces, mixed with integral water proofing compound as per manufacturers instructions, finished the surface even and smooth without using extra cement and apllying evenly a tack coat of blown 85/25 @ 1 Kgs/Sqm over a coat of water base bitumen. Includin taking down existing plaster from sunken portion. | 20 | Sqm | |
| 81 | 81 | M&L for cement concrete in foundations, filling and mass concrete, type E2, 1:5:10 (40 mm graded coarse aggregate) | 10 | Cum | |
| 82 | 82 | Supply only integral water proofing compound. | 45 | Kgs | |
| 83 | 83 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. | 100 | Sqm | |
| 84 | 84 | Dismantling of stone slab in roofs, floors, landings, etc. any thickness any position jointed in any mortar complete all as specified and as directed. | 5 | Sqm | |
| 85 | 85 | M&L for 40 mm thick cement concrete type B- 1, 1:2:4 (20 mm graded aggregate) as in leve corsue of floor, etc. | 20 | Sqm | |
| 86 | 86 | M&L for Screed bed or bedding layer of mortar (1:6) ,15 mm thick for laying floor finishes complete all as specified and as directed. | 70 | Sqm | |
| 87 | 87 | M&L for Coloured Non Skid ceramic coloured tiles 300 x 300 mm, 7 mm thick in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. | 15 | Sqm | |
| 88 | 88 | M&L for Coloured Non Skid ceramic tiles 7 to 8mm thick(square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floor/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. | 30 | Sqm | |
| 89 | 89 | M&L for Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of Makrana doogri complete all as specified and directed. | 10 | Sqm | |
| 90 | 90 | M&L for virified ceramic tiles light shade 10 mm thick (square/ rectangular) polished, size of each tiles 600 x 600 mm, in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match | 23 | Sqm | |
| 91 | 91 | M&L for chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment, including 20 mm thick screed bed in mortar 1:6. | 10 | Sqm | |
| 92 | 92 | M&L for Rendering 10 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces of walls to receive tiles complete all as specified and as directed. | 30 | Sqm | |
| 93 | 93 | M&L for Coloured Glazed ceramic tiles on vertical surface size 300 x 200x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles complete all as specified and as directed. | 30 | Sqm | |
| 94 | 94 | Demolition of cement concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) | 18 | Cum | |
| 95 | 95 | M&L for 75 mm thick cement concrete type B- 2, 1:4:8 (40 mm graded aggregate) as in sub base of floor, etc. | 150 | Sqm | |
| 96 | 96 | M&L for 25 mm thick cement concrete type B- 1, 1:2:4 (20 mm graded aggregate) as in leve corsue of floor, etc. | 40 | Sqm | |
| 97 | 97 | M&L for 75 mm thick cement concrete type C - 2, 1:3:6 (40 mm graded aggregate) as in plinth protection, finished even and smooth without using extra cement complete. | 80 | Sqm | |
| 98 | 98 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar. | 10 | Cum | |
| 99 | 99 | M&L for brick work built in CM (1:6) straight or curved on plan exceeding 6 meter mean radius using sub class ‘B’ bricks (Old size bricks) complete all as specified and as directed. | 9 | Cum | |
| 100 | 100 | M&L brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) | 10 | Sqm | |
| 101 | 101 | M&L for 15 mm thick cement plaster in CM (1:6) on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc. | 80 | Sqm | |
| 102 | 102 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc. | 150 | Sqm | |
| 103 | 103 | M&L for 15 mm thick cement plaster in CM (1:4) on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc. | 125 | Sqm | |
| 104 | 104 | M&L for 5 mm thick cement plaster 1:3 on fair faces of concrete surfaces on ceiling | 25 | Sqm | |
| 105 | 105 | Cutting holes in brick walls in cement mortar exc half brick but n.exc one brick for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required | 20 | Each | |
| 106 | 106 | M&L for PCC 1:2:4 type B0 (12.5 mm graded stone aggregate) as in filling hollow portion of preessed steel frame complet, all as specified and as directed. | 1 | Cum | |
| 107 | 107 | Supply 40 mm dia bore Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq. cm , fixed to wall, ceiling or laid in floor etc. | 110 | RM | |
| 108 | 108 | M&L Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed by Engineer-in-charge. | 60 | RM | |
| 109 | 109 | M&L for Refixing 15 mm bore old steel tubing and connections in new or old position with all new fittings (walls, ceiling, floors, etc.)Complete all as specified and as directed | 20 | RM | |
| 110 | 110 | M&L for 15 mm dia galvanized iron tubes medium grade with all fitting and fixed to walls and ceilings or laid in floors complete. | 40 | RM | |
| 111 | 111 | M&L for Taking up or down 20 mm bore, steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed. | 80 | RM | |
| 112 | 112 | M&L for Refixing 20 mm bore old steel tubing and connections in new or old position with all new fittings (walls, ceiling, floors, etc.)Complete all as specified and as directed. | 22 | RM | |
| 113 | 113 | M&L for 20 mm dia tubes, medium grade, galvanized with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed. | 58 | RM | |
| 114 | 114 | S&F in repair 15 mm dia bore CP coated brass body angular stop cock fancy type with wall flange, screwed for galvanized iron pipe or brass ferrule. | 15 | Each | |
| 115 | 115 | S&F in repair 15 mm dia bore CP coated brass body bib cock (long neck) fancy type with wall flange, screwed for galvanized iron pipe or brass ferrule. | 40 | Each | |
| 116 | 116 | S&F in repair 15 mm dia bore fancy brass chromium plated shower rose 125mm with 300/400 mm long arm. | 20 | Each | |
| 117 | 117 | S&F in repair Vitreous China wash basin, white, flat back, size 580x450 in mm excluding taps, waste, but including brackets, any size, including cutting for and pinning in ends of brackets or erecting stand etc. | 8 | Each | |
| 118 | 118 | S&F in repair 600 mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers | 15 | Each | |
| 119 | 119 | S&F in repair CP coated D type towel rod of 600 mm long with bracket and fixing elements. | 20 | Each | |
| 120 | 120 | S&F in repair CP coated brass body 15 mm dia bore pillar cock, fancy type with check nut and washer. screwed for steel pipe and brass ferrule. | 18 | Each | |
| 121 | 121 | S&F in repair CP coated soap dish fixed to plugs chromium plated brass screw complete . | 10 | Each | |
| 122 | 122 | S&F in repair Plate rack with & including shelves and hanging arrangements for utensil for kitchen , made of stainless steel 0.40 mm thick ,size 900 mm x 600mm x 250mm complete all as specified and directed. | 4 | Each | |
| 123 | 123 | M&L in repair for 32 mm dia PVC Waste pipe of pressure rating 6 kgf/sq.cm for wash hand basin/urinal/sink complete. | 170 | RM | |
| 124 | 124 | S&F in repair PVC mirror cabinate size 400 x 500mm with fixing elements, fix to wall. | 4 | Each | |
| 125 | 125 | S&F in repair health fauset 15 mm dia bore with 1.50 mtr long tube with bracket, fixed to wall, approved quality all as specified. | 16 | Each | |
| 126 | 126 | S&F in repair water tank cover for 500 to 1000 ltr approved quality all as specified. | 20 | Each | |
| 127 | 127 | S&F sinks with drain board made of stainless steel 1mm thick for kitchen with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brick-etc and connecting union to pipe, overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm | 6 | Each | |
| 128 | 128 | S&F china wash down water closet squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests white excluding flush and fix to position, including connection to drain etc.. | 4 | Each | |
| 129 | 129 | S&F vetrious china wash down water closet pan (padestal pattern), white, excluding flush and flushpipe, but including fix to position & connection to drain etc.. | 4 | Each | |
| 130 | 130 | S&F Flush pipe of Polyethylene of low or high density of PVC 32 mm dia, for low level cistern complete all as specified & as directed. | 10 | Each | |
| 131 | 131 | M&L PVC valueless , syphonic action type , flushing cistern,10 ltr capacity, low level ,white , with inlet, ball valve, float and handle including brackets complete. | 15 | Each | |
| 132 | 132 | S&F PVC connections 15 mm size with PTMT nuts of length 450 mm long for hot & cold water. | 60 | Each | |
| 133 | 133 | S&F in repair waste coupling of brass body CP coated (half or full threaded) 32 mm dia, fixed to WHB & Sink etc. | 30 | Each | |
| 134 | 134 | S&F waste coupling of brass body CP coated (half or full threaded) 32 mm dia, fixed to WHB & Sink etc. | 8 | Each | |
| 135 | 135 | S&F in repair vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) etc..including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; etc.. | 4 | Each | |
| 136 | 136 | S&F in repair vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; etc.. | 4 | Each | |
| 137 | 137 | S&F waste coupling of brass body CP coated (half or full threaded) 32 mm dia, fixed to urinal pot etc. | 20 | Each | |
| 138 | 138 | S&F in reapir waste coupling of brass body CP coated (half or full threaded) 32 mm dia, fixed to urinal pot etc. | 10 | Each | |
| 139 | 139 | S&F in repair plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device. | 12 | Each | |
| 140 | 140 | S&F plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device. | 4 | Each | |
| 141 | 141 | S&F in repair 15 mm stop valves, cast copper alloy, screwed down, high pressure, fancy type CP coated long sunk screwed both ends for iron pipe or for unions and fixed\n | 20 | Each | |
| 142 | 142 | S&F of urinal partitions slabs terminating about 40 cm above floor line, all as specified | 6 | Each | |
| 143 | 143 | Cleaning and removing all scale and dirt, exc 250 but not exc 500 ltr capacity water tank RCC/PVC tanks and from mouths of circulating pipes. | 190 | Each | |
| 144 | 144 | Cleaning and removing all scale and dirt, exc 500 but not exc 1000 ltr capacity water tank RCC/PVC tanks and from mouths of circulating pipes. | 7 | Each | |
| 145 | 145 | Cleaning and removing all scale and dirt, exc 1000 but not exc 2000 ltr capacity water tank RCC/PVC tanks and from mouths of circulating pipes. | 2 | Each | |
| 146 | 146 | S&F in repiar rotational moulded polyethylene water storage tank 500 ltrs capacity vertical with close top hoisted and fixed in position all as specifed in SSR pt I including dismantling of existing damaged water tanks. | 2 | Each | |
| 147 | 147 | S&F in repiar rotational moulded polyethylene water storage tank 1000 ltrs capacity vertical with close top hoisted and fixed in position all as specifed in SSR pt I including dismantling of existing damaged water tanks. | 1 | Each | |
| 148 | 148 | S&F PTMT ball valves 20 mm dia high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe. | 5 | Each | |
| 149 | 149 | S&F in repair PTMT ball valves 20 mm dia high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe. | 70 | Each | |
| 150 | 150 | S&F in repair 20 mm dia bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe. | 40 | Each | |
| 151 | 151 | S&F in repair bib tap 15 mm dia bore standard of PTMT and any colour screwed for iron pipe. | 50 | Each | |
| 152 | 152 | S&F in repair pillar tap 15 mm dia bore standard of PTMT and any colour screwed for iron pipe. | 20 | Each | |
| 153 | 153 | S&F in repair stop valve 15 mm dia bore standard of PTMT external thread and any colour screwed for iron pipe. | 35 | Each | |
| 154 | 154 | S&F in repair stop valve 20 mm dia bore standard of PTMT and any colour screwed for iron pipe. | 50 | Each | |
| 155 | 155 | S&F in repair angle stop valve 15 mm dia bore standard of PTMT and any colour screwed for iron pipe. | 12 | Each | |
| 156 | 156 | S&F in repair swivel shwer with shower arm 15 mm dia bore standard of PTMT and any colour screwed for iron pipe. (Min wt not lessthan 40 grm) | 5 | Each | |
| 157 | 157 | S&F in repair Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) | 20 | Each | |
| 158 | 158 | S&F in repair PVC (SWR) 'P' trap 125x110 mm dia of out let, plain with grating including jointing with solvent cement including removing of old trap and making good to the floor. | 4 | Each | |
| 159 | 159 | S&F in repair 5 ltr capacity for urinal pots, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets\n | 4 | Each | |
| 160 | 160 | S&F in repair MS hinges 100 mm long medium weight to pressed steel frame/MS windows/ventiletors etc with running welding all as specified as directed. | 30 | Each | |
| 161 | 161 | S&F in repair 15 mm dia bore brass spindle for bib tap/angle cock/pillar cock etc. | 40 | Each | |
| 162 | 162 | S&F in repair 15 mm dia bore brass spindle for stop cock/2 way mixture etc | 30 | Each | |
| 163 | 163 | S&F in repair 15 mm dia brass CP mixture for mixing hot and cold water screwed down for iron pipe and fixed all as specified as directed. | 4 | Each | |
| 164 | 164 | Demolition of PVC pipe any size complete all as specified | 34 | RM | |
| 165 | 165 | Dismantling wrought iron or mild steel work of any description not otherwise provided for | 1.3 | Qtl | |
| 166 | 166 | M&L rolled mild steel Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 290 (gde E - 165) | 130 | Kgs | |
| 167 | 167 | S&F 110 MM PVC (SWR) pipes single socket in any lenth with rubber ring joints fixed to wall. | 10 | RM | |
| 168 | 168 | S&F 110 mm PVC (SWR) bends any radius with access door | 5 | Each | |
| 169 | 169 | S&F 110 mm PVC (SWR) branch piece single (Y) equal or unequal with access door. | 5 | Each | |
| 170 | 170 | S&F 110mm PVC (SWR) junction piece (single T) equal or unequal with access door. | 5 | Each | |
| 171 | 171 | S&F 75mm PVC (SWR) pipe single socket in any lenth with rubber ring joints fixed to wall. | 6 | RM | |
| 172 | 172 | S&F 75 mm PVC (SWR) bends any radius with access door. | 6 | Each | |
| 173 | 173 | S&F 75mm PVC (SWR) junction piece (single T) equal or unequal with access door. | 6 | Each | |
| 174 | 174 | M&L for glazing with oil putty in squares not exceeding 0.50 Sqm in each pane of window glaass including removing of old putty complete all as specified and directed. | 150 | RM | |
| 175 | 175 | S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. | 4 | Each | |
| 176 | 176 | Taking down steel glass window shutter(single) with frame n. exc 1.5 Sqm without taking off shutters from the frame including grill completer all as specified and directed. | 3 | Each | |
| 177 | 177 | S&F for anodised aluminium powder coated frame(minimum thickness of powder coating 50 micron) for door, windows, ventilators with one or more rabates including joining cleat for fixing complete all as specified and directed. | 30 | Kg | |
| 178 | 178 | S&F Anodised aluminium shutter/sliding for window and ventilators fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified | 5 | Sqm | |
| 179 | 179 | Demolition of RCC roof,floor (other than ground floor) beams, column, staircase, landing, chajjas and similar suspended work complete all as specified and directed. | 1 | Cum | |
| 180 | 180 | M&L for formwork to flat soffits of suspended slab such as roof slabs, floor slab, landings and similar works n.exc 200mm thick complete all as specified & directed. | 8 | Sqm | |
| 181 | 181 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed. | 40 | Kg | |
| 182 | 182 | M&L for providing reinforced cement concrete (nominal mix) type B1(1:2:4) using 20mm graded stone aggregate as in slab supported on wall, roofs, landing like etc complete all as specified & directed. | 1 | Cum | |
| 183 | 183 | Dismantling of conc by chiseling from RCC member columns, beams parapet roofs, facia etc exposing the reinforcement without disturbing the core of RCC member, cleaning the surface with wire brushes cleaning the reinforcement free from rust by sand blasting providing at places addl reinforcement welding with existing reinforcement as directed wherever required binding RCC 100mmx100mm (10 gauge welded mesh) with binding wire & tack welding using adhesive (i.e plaster conc for conc admixture) & provision guniting pressure 2.2 to 2.5 kg per sqm) with admixture 1.cement 3-1/2 of sand of thickness 40mm (average) incl stripping floating with wooden striippers for proper dimension control necessary form wk & scaffolding complete surface of guniting to be finished fair with 10mm thick plaster in cement mortar 1:4 with water proofing compound @ 3% by weight of cement cleaning & removing of waste material etc a directed at site (cost of weld mesh included in the rates of this item and additional reinforcement if required shall be provided & measured separately) incl for six storeyed bldg. | 5 | Sqm | |
| 184 | 184 | S&F Welded steel wire mesh weight n.exc 4kg/sqm for around RCC col/beam/parapet wall complete all as specified & directed. | 10 | Kg | |
| 185 | 185 | M&L for preparing old decorated surfaces of walls plastered or un-plastered by complete removal of existing treatement by scraping, washing, rubbing down or stopping distempered or painted surfaces etc & applying of Birla/JK white wall putty one or more coat on existing prepared surface for smooth finishing and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed. | 380 | Sqm | |
| 186 | 186 | M&L for preparing old decorated surfaces of walls plastered or un-plastered by brooming down with steel or wire brush and scraping down smoke moulds moss & efflorescent salt & removing all vegetation growth etc & applying one coat of exterior emulsion paint on old decorated surfaces of walls complete all as specified and directed.(Make :- Apex (Asian paints)/ Weather coat (Berger) ) | 480 | Sqm | |
| 187 | 187 | Taking down steel rolling shutter including all fixtures like ball bearing top cover safety lock exc. 4.0 sqm each complete all as specified and directed. | 1 | Each | |
| 188 | 188 | S&F Steel rolling shutters, thickness of laths in 1.25mm, without ball bearing as specified including top cover anchoring rod hasp and staple and one shop coat of primer erected in position as indicated complete push pull or manual type complete all as specified. | 8 | Sqm | |
| 189 | 189 | S&F Safety level locks mild steel with 4 levers for rolling shutters complete all as specified and directed. | 2 | Each | |
| 190 | 190 | S&F Ball bearing for rolling shutters complete all as specified and directed. | 2 | Each | |
| 191 | 191 | M&L for repair, greasing, painting etc to existing steel colapsible door/rolling shutter fixed with wall to smooth moving and locking condition complete all as specified and directed. | 4 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
