| 1 | 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : | BI01010001010000000000000515BI0100001113 | 109.45 | cum |
|---|
| 2 | 2 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) | BI01010001010000000000000515BI0100001115 | 16.94 | cum |
|---|
| 3 | 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) (Crushed) with 20% boulders | | 71.15 | cum |
|---|
| 4 | 4 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate. | | 19.71 | sqm |
|---|
| 5 | 5 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) | | 10.43 | cum |
|---|
| 6 | 6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. | | 1303.75 | kg |
|---|
| 7 | 7 | Centering and shuttering including strutting, propping etc. and removal of form for: | | | |
|---|
| 8 | 7.1 | Foundations, footings, bases of columns etc. for mass concrete. | | 202.31 | sqm |
|---|
| 9 | 7.2 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. | | 90.76 | sqm |
|---|
| 10 | 8 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete | | 23.4 | sqm |
|---|
| 11 | 9 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in\nfoundation and plinth including curing in :\n Cement mortar 1:6 ( 1 cement : 6 coarse sand) and Extra for brick work with common burnt clay bricks/cement concrete bricks in\nsuperstructure above plinth level upto floor five level | | 23.22 | cum |
|---|
| 12 | 10 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades,\nlaid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm | | 66.72 | sqm |
|---|
| 13 | 11 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown | | 4.27 | sqm |
|---|
| 14 | 12 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622\n(thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing\nin white cement mixed with pigment of matching shade complete. | | 21.96 | sqm |
|---|
| 15 | 13 | 20mm Cement plaster of mix:\n 1 : 6 ( 1 cement : 6 fine sand) | | 336.07 | sqm |
|---|
| 16 | 14 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded | | 4571.46 | kg |
|---|
| 17 | 15 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes | | 1052.16 | kg |
|---|
| 18 | 16 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to steel windows by welding | | 165.48 | kg |
|---|
| 19 | 17 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of\nthe sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling\n/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | | 117.39 | sqm |
|---|
| 20 | 18 | Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy\nprimer on both side of the sheet and polyester top coat 15-18 microns\nusing self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) | | 28.7 | mtr |
|---|
| 21 | 19 | Providing and fixing tiled False Ceiling of specified materials of size 595x595mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms/sqm both side inclusive ) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200 x 600mm and secondary cross “T” of length 600mm and size 24x25 mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x 0.30 mm and laying false ceiling tiles of approved texture in the grid including, wherever, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.8 mm spaced at 1200mm center to center along size 85x30x 0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. (The rate is excluding the cost of tiles which will be paid for separately). 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard manufactured from natural gypsum as per IS 2095 part-I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. | | 60.92 | sqm |
|---|
| 22 | 20 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanized with zinc coating of 120 gms/sqm (both side\ninclusive) as per IS:277 and consisting of angle cleats of size 25 mm widex1.6mm thick with flanges of 27mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm diax40mm long with 6 mm dia bolts, other flange of cleat fixed to the\nangle hangers of 25x10x0.5mm of required length with nuts & bolts of required size and other end of angle hanger fixed with G.I. channels 45x15x0.9 mm running at the spacing of 1200 centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diaX230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre to centre, with 25mm long drive-all screws @ 230 mm interval ,including fixing of gypsum board/ calcium silicate board to ceiling section and perimetre channel with the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the gypsum board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers’ specification and also including the cost of making openings for light fittings, grills diffusers, cutouts made with frame of perimetre channels suitably fixed all complete as per drawing and specification and direction of the Engineer-in-Charge but excluding the cost of painting with: 12.5 mm thick tapered edge gypsum moisture resistant board | | 23.4 | sqm |
|---|
| 23 | 21 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). Second class Kail wood (35 mm thick) | | 4.9 | sqm |
|---|
| 24 | 22 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side, Grade I, Type II IS : 12823 marked | | 8.33 | sqm |
|---|
| 25 | 23 | Providing and fixing glazed shutters for doors, windows and clerestory windows\nusing 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class deodar wood (35 mm thick) | | 16.27 | sqm |
|---|
| 26 | 24 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of\naverage width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm\nfor doors, windows and clerestory windows with ISI marked M.S. pressed butt\nhinges bright finished of required size with necessary screws as per direction of\nEngineer-in-charge : Second class Kail wood (35 mm thick) | | 23.1 | sqm |
|---|
| 27 | 25 | Applying priming coats with primer of approved brand and manufacture,\nhaving low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and\nsoft wood) having VOC content less than 50 grams/ liter | | 72.44 | sqm |
|---|
| 28 | 26 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work | | 72.44 | sqm |
|---|
| 29 | 27 | Painting with aluminum paint of approved brand and manufacture to give an even shade. Two or more coats on new work | | 51.57 | sqm |
|---|
| 30 | 28 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick | | 336.07 | sqm |
|---|
| 31 | 29 | Distempering with oil bound washable distemper of approved brand and\nmanufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer | | 205.73 | sqm |
|---|
| 32 | 30 | Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) | | 100.64 | sqm |
|---|
| 33 | 31 | Providing and fixing aluminum extruded section body tubular type universal\nhydraulic door closer,(having brand logo with IS: 3564, embossed on the body,\ndoor weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete : | | 2 | Nos |
|---|
| 34 | 32 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :\n 250x16 mm | | 5 | Nos |
|---|
| 35 | 33 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : | | | |
|---|
| 36 | 33.1 | 150x10 mm | | 12 | Nos |
|---|
| 37 | 33.2 | 100x10 mm | | 64 | Nos |
|---|
| 38 | 34 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 125 mm | | 87 | Nos |
|---|
| 39 | 35 | Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 20 mm dia. nominal bore (Medium) | | 60 | mtr |
|---|
| 40 | 36 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Concealed pipe including painting with anti corrosive\nbitumastic paint, cutting chases and making good the wall: 15 mm dia. nominal bore | | 100 | mtr |
|---|
| 41 | 37 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 | | 1 | No |
|---|
| 42 | 38 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 20 mm nominal bore | | 3 | Nos |
|---|
| 43 | 39 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) 20 mm nominal bore | | 3 | Nos |
|---|
| 44 | 40 | Provididng and fixing white vitreous china pedestal type water closet (European type W.C pan) with seat and lid, 10 liter low level white PVC flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors whever required: WC pan with ISI marked white solid plastic seat and lid. | | 1 | No |
|---|
| 45 | 41 | Providing and fixing 8 mm dia C.P / S.S jet with flexible tube upto 1 m long with S.S triangular plate to european type W.C of quality and make as approved by Engineer in charge. | | 1 | No |
|---|
| 46 | 42 | Providing and fixing of Wash basin with C.I brackets, 15 mm dia C.P brass single hole basin mixer of approved quality and make, incl. painting of fittings and brackets, cutting and making good the walls wherever reqd. white vitreous china wash basin size 550 x 400 mm with a 15 mm C.P brass single hole basin mixer. | | 1 | No |
|---|
| 47 | 43 | Providing and fixing white vitreous china laboratory sink incl. making all connections excl. cost of fittings, 600 x 450 x 200 mm | | 3 | Nos |
|---|
| 48 | 44 | Providing and fixing of C.P brass wall mixer of standard quality and approved make as approved by Engineer in charge, 15 mm nominal dia. | | 1 | No |
|---|
| 49 | 45 | Providing and fixing of C.P brass sink mixer of standard quality and approved make as approved by Engineer in charge, 15 mm nominal dia. | | 3 | Nos |
|---|
| 50 | 46 | Providing and fixing PVC waste pipe for sink or wash basin incl. PVC waste fittings complete semi rigid pipe of 32 mm dia. | | 4 | Nos |
|---|
| 51 | 47 | Providing and fixing 15 mm nominal bore C.P brass angle valve for basin mixer and geyser pints of approved make conforming to IS: 8931 | | 10 | Nos |
|---|
| 52 | 48 | Providing and fixiing of 600 x 450 mm bevelled edge mirror of superior glass ( of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P brass screws and washers complete. | | 1 | No |
|---|
| 53 | 49 | Providing and fixing of 600 x 120 x 5 mm glass shelf with edges round off supported on anodized aluminium angle frame with C.P brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc, complete. | | 4 | Nos |
|---|
| 54 | 50 | Providing and fixing of 100 mm sand cast iron grating for gully trap. | | 4 | Nos |
|---|
| 55 | 51 | Providing and fixing PTMT towel rail complete with brackets fixed to wodden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms. | | 1 | No |
|---|
| 56 | 52 | Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms. | | 5 | Nos |
|---|
| 57 | 53 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. | | 1 | No |
|---|
| 58 | 54 | Providing and fixing of unplasticized PVC connection pipe with brass unions, 15 mm nominal bore. | | 6 | Nos |
|---|
| 59 | 55 | Providing and fixing of 45 mm long clumps of approved design for PVC pipes, etc, incl. cutting holes and making good the walls, etc. for 100 mm dia. | | 6 | Nos |
|---|
| 60 | 56 | Providing and fixing Geyser of approved brand and manufacture incl. all fittings, etc, complete. | | 1 | No |
|---|
| 61 | 57 | Providing and placing on terrace polyethylene water storage tank IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and base support for tank. | | 2000 | ltr |
|---|
| 62 | 58 | Providing and fixing of PVC pipes of dia 62 mm for disposal line fittings complete incl. all connections, complete job. | | 20 | mtr |
|---|
| 63 | 59 | Providing and fixing of Pipes of dia 100 mm for fisposal line fittings complete incl. all connections, complete job. | | 30 | mtr |
|---|
| 64 | 60 | Providing and fixing PVC fittings in the PVC disposal line, complete job. | | | |
|---|
| 65 | 60.1 | Door junction (100 mm) | | 1 | No |
|---|
| 66 | 60.2 | Plain bend (100 mm) | | 2 | Nos |
|---|
| 67 | 60.3 | Plain bend (62 mm) | | 1 | No |
|---|
| 68 | 60.4 | Door bend (62 mm) | | 1 | No |
|---|
| 69 | 60.5 | Vent cowl (110 mm) | | 1 | No |
|---|
| 70 | 61 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | | 6 | Nos |
|---|
| 71 | 62 | Carriage of materials by mechanical transport including loading & unloading complete. | BI01010001010000000000000515BI0100001116 | | |
|---|
| 72 | 62.1 | Carriage of stone avg. lead of 06 km by M T | BI01010001010000000000000515BI0100001117 | 14.23 | cum |
|---|
| 73 | 62.2 | Carriage of stone agg. (40 mm ) avg. lead of 06 km by M T | BI01010001010000000000000515BI0100001118 | 15.08 | cum |
|---|
| 74 | 62.3 | Carriage of Sand avg. lead of 22 km by M T | BI01010001010000000000000515BI0100001119 | 69.76 | cum |
|---|
| 75 | 62.4 | Carriage of stone agg. (below 40 mm) avg. lead of 22 km by M T | | 85.23 | cum |
|---|
| 76 | 62.5 | Carriage of Bricks avg. lead of 210 km by M T | BI01010001010000000000000515BI0100001120 | 11030 | Nos |
|---|
