Military Engineer Services-MES has published Special Repairs To Roof Treatment , Repairs / Replacement Of Rusted Doors / Windows , Rain Water Pipes , Re-Plastering Of Chajjas And Anti-Termite Treatment To Certain Buildings At Site-Ii ( Rajpura ) Under Ge ( Af ) Ambala. Submission Date for this Tender is 05-04-2021. Shed Construction Tenders in GE AF AMBALA Haryana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 29-Mar-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 05-04-2021 |
| Name of Work: SPECIAL REPAIRS TO ROOF TREATMENT, REPAIRS / REPLACEMENT OF RUSTED DOORS / WINDOWS, RAIN WATER PIPES, RE-PLASTERING OF CHAJJAS AND ANTI-TERMITE TREATMENT TO CERTAIN BUILDINGS AT SITE-II (RAJPURA) UNDER GE (AF) AMBALA | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Taking down wooden chowkats or frames not exceeding 1.5sqm each with shutters (without taking off shutters from the frames) and disposing off complete all as specified and directed | 10 | Each | |
| 2 | 2 | Taking down wooden chowkats or frames exceeding 1.5sqm but not exceeding 4sqm each with shutters (without taking off shutters from the frames) and disposing off complete all as specified and directed | 37 | Each | |
| 3 | 3 | Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles and disposing off complete all as specified and as directed | 12.5 | Cum | |
| 4 | 4 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for keys, scubbing down with water, etc. including all necessary scaffolding as required and rubbishing off the premises, etc. complete all as specified and as directed | 1400 | Sqm | |
| 5 | 5 | Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and removal of debris complete all as specified and as directed | 48 | Cum | |
| 6 | 6 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and disposing off complete all as specified and as directed | 592 | Sqm | |
| 7 | 7 | Taking up or down 15mm bore steel water tubing and connections including cleaning and setting aside for refixing or disposing off, etc. complete all as specified and as directed | 200 | Rm | |
| 8 | 8 | Taking up or down 20mm bore steel water tubing and connections including cleaning and setting aside for refixing or disposing off, etc. complete all as specified and as directed | 100 | Rm | |
| 9 | 9 | Taking up broken sewer line 150mm bore at any any depth and disposing off, etc. complete all as specified and as directed | 30 | Rm | |
| 10 | 10 | Demolition of mud in roofs, any thickness, including plastering and leaping (whether full thickness removed or only a part thereof) complete all as specified and as directed | 71 | Cum | |
| 11 | 11 | Dismantling brick tiles or terracing tiles, single layer on roofs, sorting and stacking serviceable tiles and disposing off unserviceable tiles complete all as specified and as directed | 708 | Sqm | |
| 12 | 12 | Dismantling and taking down, overhead water storage tanks, 250 to 500litres capacity, including disconnecting from water mains, etc. plugging, etc. including all necessary staging, liftting & lowering, etc. and disposing off complete all as specified and as directed | 5 | Each | |
| 13 | 13 | Dismantling stone slabs / tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar and disposing off complete all as specified and as directed | 7 | 10Sqm | |
| 14 | 14 | M&L for providing and injecting chemical emulsion for post constructional anti-termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25litre / linear metre including drilling and plugging holes, etc. in aprons, etc. complete all as specified and as directed | 400 | Rm | |
| 15 | 15 | M&L for treatment of soil under existing floors using emulsion @ 1.0litre / hole, 300mm apart including drilling and plugging 12mm dia holes with cement and coarse sand mortar (1:2) to match the existing floors complete all as specified and as directed | 310 | Sqm | |
| 16 | 16 | M&L for plain cement concrete 1:2:4 (type B-1) using 20mm graded stone aggregate as in bonding / locking edges of interlocking tiles, etc. including weathering slightly rounded or chamfered edges and throating including necessary formwork as required complete all as specified and as directed | 1 | Cum | |
| 17 | 17 | M&L for 75mm thick plain cement concrete 1:2:4 (type B-1) using 20mm graded stone aggregate as in sub-bases, floors, etc. complete all as specified and as directed | 300 | Sqm | |
| 18 | 18 | M&L for 75mm thick plain cement concrete 1:4:8 (type D-2) using 40mm graded stone aggregate as in paths, pavings, sub-bases, etc. complete all as specified and as directed | 70 | Sqm | |
| 19 | 19 | M&L for 75mm thick plain cement concrete 1:3:6 (type C-2) using 40mm graded stone aggregate as in plinth protection, etc. laid in bays including filling of construction joints with sealing compound grade-A complete all as specified and as directed | 150 | Sqm | |
| 20 | 20 | M&L for 25mm thick plain cement concrete 1:2:4 (type B-1) using 20mm graded stone aggregate as in flooring, sub-bses, etc. finished even and fair complete all as specified and as directed | 200 | Sqm | |
| 21 | 21 | M&L for plain cement concrete type B-0,1:2:4 (using 12.5mm graded stone aggregates) as in padding, filling of depressions, coping, etc. complete all as specified and as directed | 73 | Cum | |
| 22 | 22 | M&L for 40mm thick plain cement concrete 1:2:4 (type B-1) using 20mm graded stone aggregates as in flooring, sub-bases, etc. complete all as specified and as directed | 100 | Sqm | |
| 23 | 23 | Supply and lay glass dividing strips, 3mm thick, inserted in position, conforming to design approved complete all as specified and as directed | 50 | Rm | |
| 24 | 24 | S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar works conforming to Fe-290 grade E-165 complete all as specified and as directed | 65 | Kg | |
| 25 | 25 | M&L for brickwork with sub-class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:6) complete all as specified and as directed | 8 | Cum | |
| 26 | 26 | --ditto-- all as per serial item 25 herein above but except bricks | 3 | Cum | |
| 27 | 27 | M&L for brickwork with sub-class 'B' bricks, straight or curved on plan as in half brick thick walls built in CM (1:4) complete all as specified and as directed | 20 | Sqm | |
| 28 | 28 | M&L for rendering 5mm thick plaster, in cement mortar (1:3) on fair faces of concrete surfaces of soffits of slabs, ceilings, chajjas, etc. finished even and smooth without using extra cement complete all as specified and as directed | 420 | Sqm | |
| 29 | 29 | M&L for rendering 15mm thick on brickwork or concrete surfaces, chajjas, etc. in CM (1:4) in two layers (10+5mm), top layer mixed with water proofing powder at rate of 3% of cement or as per manufacturer's instructions, finished even and fair without using extra cement complete all as specified and as directed\nNote: Water proofing compound shall be measured separately under respective item | 670 | Sqm | |
| 30 | 30 | M&L for rendering 15mm thick, in cement mortar (1:6) on fair faces of brick masonry / concrete surfaces, finished even and smooth without using extra cement as in walls complete all as specified and as directed | 600 | Sqm | |
| 31 | 31 | M&L for rendering 15mm thick, in cement mortar (1:4) on RCC roof slabs, finished even and smooth without using extra cement as in walls complete all as specified and as directed | 708 | Sqm | |
| 32 | 32 | M&L for roughening surfaces of old concrete roof / floor by picking, sweeping clean and washing down with water to remove dust, etc. and brushing neat cement slurry with 3.0kg of cement per square metre complete all as specified and as directed | 708 | Sqm | |
| 33 | 33 | Supply only integral water proofing compound as specified | 390 | Kg | |
| 34 | 34 | M&L for non-skid ceramic tiles, coloured, 7 to 8mm thick, joint free, edge cut, exceeding 0.11sqm and not exceeding 0.18sqm in size, of superior quality on floors, etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles with and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed | 130 | Sqm | |
| 35 | 35 | M&L for glazed ceramic tiles, coloured of size 350x250x7 to 8mm thick, of superior quality on vertical faces, dados, skirting, risers, etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles with and including 10mm thick backing coat in CM 1:4 complete all as specified and as directed | 100 | Sqm | |
| 36 | 36 | M&L for glazed ceramic tiles, coloured of size 450x350x7 to 8mm thick, of superior quality on vertical faces, dados, skirting, risers, etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles with and including 10mm thick backing coat in CM 1:4 complete all as specified and as directed | 50 | Sqm | |
| 37 | 37 | M&L machine cut and machine polished kota stone slab 20 to 25mm thick as in floors, in single piece laid over and including 10mm thick backing coat in CM 1:4 (rate shall be included), set and jointed in neat cement slurry and pointed with cement and pigments to match the shade of slab including rubbing and polishing etc. complete all as specified and as directed | 312 | Sqm | |
| 38 | 38 | M&L for 40mm thick brick tiles laid over and including 15mm thick cement mortar screed in 1:6, jointed and grouted flush in cement mortar 1:3 mixed with 5% crude oil in roofs complete all as specified and as directed | 495 | Sqm | |
| 39 | 39 | --ditto-- all as per serial item No. 38 hereinabove but except tiles complete all as specified and as directed\nNote: Serviceable brick /terracing tiles obtained under taking down hereinabove shall be reused in this item | 212 | Sqm | |
| 40 | 40 | M&L for green marble slab, 18 to 20mm thick (table rubbed and polished) in single piece, cooking platforms, and like bedded in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble complete all as specified and as directed | 10 | Sqm | |
| 41 | 41 | M&L preparation of newly plastered / unplastered surfaces and applying three coats of white / colour wash on ceilings, soffits of slabs, etc. complete all as specified and as directed | 420 | Sqm | |
| 42 | 42 | M&L for preparation of old masonry / concrete wall surfaces by scrapping down old paint, smoke, sooth, moulds, efflorecense, salt deposition, grease spots, etc. with steel wire brush, washing down and applying one coat of white wash including all necessary staging, scaffolding, safety precautions, etc. as required to work at heights, etc. complete all as specified and as directed | 1000 | Sqm | |
| 43 | 43 | M&L for preparation of old masonry / concrete surfaces of ceiling, soffits of slabs, etc. by scrapping down old paint, smoke, sooth, moulds, efflorecense, salt deposition, grease spots, etc. with steel wire brush, washing down and applying one coat of white wash including all necessary staging, scaffolding, safety precautions, etc. as required to work at heights, etc. complete all as specified and as directed | 500 | Sqm | |
| 44 | 44 | M&L for preparation of new masonry / concrete wall / ceiling surfaces and applying two coats of oil emulsion distemper over a coat of wall primer including all necessary staging, scaffolding, safety precautions, etc. as required to work at heights, etc. complete all as specified and as directed | 600 | Sqm | |
| 45 | 45 | M&L for preparation of old masonry / concrete surfaces of walls, etc. by scrapping down old paint, smoke, sooth, moulds, efflorecense, salt deposition, grease spots, etc. with steel wire brush, washing down and applying one coat of oil emulsion distemper including all necessary staging, scaffolding, safety precautions, etc. as required to work at heights, etc. complete all as specified and as directed | 100 | Sqm | |
| 46 | 46 | M&L preparation of new plastered / unplastered wall surfaces of any description and applying two coats of cement based paints (tint as approved by the GE) as per manufacturer's instructions oner a coat of chalk whitning including all necessary staging, scaffolding, etc. complete all as specified and as directed | 670 | Sqm | |
| 47 | 47 | M&L for preparation of old masonry / concrete surfaces of walls, etc. by scrapping down old paint, smoke, sooth, moulds, efflorecense, salt deposition, grease spots, etc. with steel wire brush, washing down and applying one coat of cement based paint including all necessary staging, scaffolding, safety precautions, etc. as required to work at heights, etc. complete all as specified and as directed | 1000 | Sqm | |
| 48 | 48 | M&L for preparing of new steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint (tint as approved) over a coat of red oxide zinc chrome primer complete all as specified and as directed | 95 | Sqm | |
| 49 | 49 | M&L for preparing of old steel surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint (tint as approved) complete all as specified and as directed | 200 | Sqm | |
| 50 | 50 | M&L for preparing of new wooden surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint (tint as approved) over a coat of red oxide primer complete all as specified and as directed | 250 | Sqm | |
| 51 | 51 | M&L for preparing of old wooden surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint (tint as approved) complete all as specified and as directed | 300 | Sqm | |
| 52 | 52 | S&F steel water tubing, 15mm bore, medium grade, galvanised with screwed and socketed joints, in any length, including supply and fixing all fittings, ISI marked conforming to IS -1239 and fixed to walls or laid in floors / trenches required for protection of electric clables complete all as specified and as directed | 180 | Rm | |
| 53 | 53 | Fixing only steel water tubing, 15mm bore, medium grade, galvanised with screwed and socketed joints, including supply and fixing all fittings, ISI marked conforming to IS -1239 and fixed to walls or laid in floors / trenches required for protection of electric clables complete all as specified and as directed for the following bores:\nNote: Serviceable tubings obtained from dismantling herein before will be reused under this item | 20 | Rm | |
| 54 | 54 | S&F steel water tubing, 20mm bore, medium grade, galvanised with screwed and socketed joints, in any length, including supply and fixing all fittings, ISI marked conforming to IS -1239 and fixed to walls or laid in floors / trenches required for protection of electric clables complete all as specified and as directed | 90 | Rm | |
| 55 | 55 | Fixing only steel water tubing, 20mm bore, medium grade, galvanised with screwed and socketed joints, including supply and fixing all fittings, ISI marked conforming to IS -1239 and fixed to walls or laid in floors / trenches required for protection of electric clables complete all as specified and as directed for the following bores:\nNote: Serviceable tubings obtained from dismantling herein before will be reused under this item | 10 | Rm | |
| 56 | 56 | S&F in repairs 600x450mm full sized bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed | 5 | Each | |
| 57 | 57 | S&F in repairs 15mm dia bib taps, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed | 30 | Each | |
| 58 | 58 | S&F in repairs 15mm dia pillar taps, fancy type, cast copper alloy, with capstain heads, chromium plated, screwed down, high pressure, with or without lettered 'HOT'/'COLD', with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed | 15 | Each | |
| 59 | 59 | S&F 10litres capacity PVC flushing tank, white / coloured, syphonic action type, low level, valveless, with PVC inlet ball valve, PVC flush pipe, float and suitable sized brackets including cutting of floor / wall and making good to the disturbed surfaces in CM 1:3 with finishes to match with the existing and taking down of old PVC flush tank and disposing off complete all as specified and as directed | 5 | Each | |
| 60 | 60 | S&F in repairs vitreous China squatting pan, Orissa pattern of size 580x440mm, white, with integral foot rests and 'P' or 'S' trap including lime concrete bedding, connecting and flushing pipe and trap complete all as specified and as directed | 10 | Each | |
| 61 | 61 | S&F in repairs wash hand basin, vitreous China, coloured, flat back type, of size 640x450mm, including CI brackets, cutting for and pinning in ends of brackets with coupling and including PVC connection 60cm key with brass union complete all as specified and as directed | 9 | Each | |
| 62 | 62 | S&F in repairs vitreous China wash down water closet pan (Pedestal pattern), coloured (as approved), with 'P' or 'S' trap, including flush pipe, trap, connection to drain or outgoing pipe, anti-syphonic pipe, seat cover to match with colour of WC, closed pattern with flat bottom & cover and chromium plated mild steel or aluminum anodized hinge device and jointing and connecting up complete all as specified and as directed | 5 | Each | |
| 63 | 63 | S&F in repairs vitreous China bowl urinal flat back half stall of size 465x355x265mm (minimum), white, with grating and union for discharge pipe, including providing fixing plugs, brackets, grating, union and connections to flushing pipe, bedding urinal against wall in CM 1:2, securing bowl with plugs and 60mm long brass screws, pointing around urinal bowl in white cement (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed | 2 | Each | |
| 64 | 64 | S&F in repairs sink with drainage board overall size 915mmx460mm and bowl size 410x330x160mm, made of stainless steel 1mm thick for kitchen with plugs, washer and waste in repairs including in cement mortar to dwarf wall or including fixing cantilever brackets and connection union to pipe complete all as specified and as directed | 5 | Each | |
| 65 | 65 | S&F in repairs 20mm dia fancy type powder coated (tint as approved) aluminium curtain / drapery rods / towel rails, etc. of rod wall thickness 1mm (min), including pair of aluminium, powder coated brackets, holders with funnel at ends complete all as specified and as directed | 30 | Rm | |
| 66 | 66 | S&F in repairs 15mm dia PTMT jet spray with 1.5m long PVC braided pipe complete all as specified and as directed | 5 | Each | |
| 67 | 67 | S&F in repairs CP nozzle with pipe 15mm dia urinal spray complete all as specified and as directed | 2 | Each | |
| 68 | 68 | S&F in repairs UPVC floor trap, plain with PVC grating suitable for 75mm external dia type-'B' pipes including jointing with solvent cement | 5 | Each | |
| 69 | 69 | S&F PVC (SWR) gully traps 125/110mm setting and jointing with solvent cement, suitable for 110mm dia type 'B' pipes, ISI marked, any radius with rubber ring joints, etc. complete all as specified and as directed | 6 | Each | |
| 70 | 70 | S&F PVC (SWR) bends, 110mm bore, ISI marked, any radius with oval access door, with rubber ring joints, etc. complete all as specified and as directed | 5 | Each | |
| 71 | 71 | S&F PVC (SWR) bends, 75mm bore, ISI marked, any radius with oval access door, with rubber ring joints, etc. complete all as specified and as directed | 5 | Each | |
| 72 | 72 | S&F in repairs PVC cowl, any radius suitable for 110mm bore PVC SWR pipes complete all as specified and as directed | 5 | Each | |
| 73 | 73 | Supply and laying 150mm bore reinforced concrete pipes, class NP2, jointed in cement mortar 1:1 with collars including plain cement concrete 1:4:8 (type D-2) using 40mm graded stone aggregate for bed to drain pipes, packing under and haunching against the sides of pipes after they are laid and making necessary connection and testing complete all as specified and as directed | 30 | Rm | |
| 74 | 74 | S&F solid PVC door frame of size 50x47mm made out of 5mm thick plain/wooden grain printed coloured PVC sheet reinforced with MS square tube all as per specifications and drawing given in SSR Part-I 2009 all as per manufacturer's instructions and making good the disturbed surfaces complete all as specified and as directed | 47.5 | Rm | |
| 75 | 75 | S&F factory made solid panel PVC door shutter, 30mm thick, consisiting of MS frame made out of MS tubes for top and bottom rails, MS frame shall be moulded with plain coloured PVC 'C' channel and having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain coloured PVC sheet top rail, lock rail and bottom rails, paneling of plain coloured PVC sheet to be fitted in MS frame welded / sealed to stiles and rails with suitable PVC sheet beading and jointed together using solvent and fixed in position in frame as per site requirement and specified in MES Schedule 2010 complete all as specified and as directed\n Door Width Size of style Size of rails\nexceeding 1.5' but not exceeding 2' 50mm 50mm\nexceeding 2' but not exceeding 2.5' 50mm 75mm \nexceeding 2.5' but not exceeding 3' 75mm 100mm\nexceeding 3' 100mm 125mm | 15 | Sqm | |
| 76 | 76 | S&F steel window (box type) factory fabricated, double shutter (glazed and wire gauzed) with side hung shutters including pintle type hinges, steel handles fabricated type for each leaf duly welded, mild steel barrel tower bolts 150mm size (02Nos for each leaf) duly welded, with glazing bars dovetailed or welded including MS fillets, welding of guard bars with one shop coat of red oxide zinc chrome primer overall complete all as specified and as directed \nNotes:\n(i) Windows shall be fabricated as per CE Palam drawing No. TD-219 Sh 1/3 to 3/3 dated 02 Jan 2007 (updated up to date) and these drawings shall be referred at the O/o the GE (AF) Ambala\n(ii) Glazing, wire gauge, guard bars will be measured and paid separately under respective items herein\n(iii) Any other sundries, etc. as required at site shall be deemed to be included in the quoted rate | 15 | Sqm | |
| 77 | 77 | S&F pressed steel frames of size 125x60mm and 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and as directed | 102 | Rm | |
| 78 | 78 | M&L 35mm thick factory made plain framed paneled door shutter (two panels) 2nd class HW rail and style with lock rail and panels of 12mm thick ISI marked veeneered particle board with commercial veeneering on both faces, with size of rail and style shall be as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and as directed | 19 | Sqm | |
| 79 | 79 | S&F 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc and divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, sizes of members of shutters as specified in clause 8.20 9(b) of SSR Part-I, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., supplied and fitted to chowkats complete all as specified and as directed | 17 | Sqm | |
| 80 | 80 | S&F factory fabricated flush shutters, 30mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed | 17 | Sqm | |
| 81 | 81 | S&F steel ventilator with top hung shutter including hinges, steel peg stay, etc. to receive glazing / gauge and one coat of primer and including cutting into and fixing into walls, etc. with hold fast made out of flat iron 25x5mm complete all as specified and as directed | 10 | Sqm | |
| 82 | 82 | S&F butt hinges, 100mm size, medium weight, cold rolled mild steel complete all as specified and as directed | 102 | Each | |
| 83 | 83 | S&F butt hinges, 75mm size, medium weight, cold rolled mild steel complete all as specified and as directed | 30 | Each | |
| 84 | 84 | S&F 150mm long, aluminium door handles, cast type with back plate 3mm thick, complete all as specified and as direct | 52 | Each | |
| 85 | 85 | S&F 200mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed | 52 | Each | |
| 86 | 86 | S&F 300mm aluminium anodised sliding door bolt with hasp and staple, bolt type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed | 26 | Each | |
| 87 | 87 | S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed | 16 | Sqm | |
| 88 | 88 | S&F in repairs galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed | 30 | Sqm | |
| 89 | 89 | S&F 3mm thick plain / sheet glass, ordinary quality, cut to required size and shape for windows, etc. in glazing not exceeding 0.5sqm in area with oil putty including hacking off old glass and putty fillings, etc. complete all as specified and as directed | 45 | Sqm | |
| 90 | 90 | S&F 3mm thick figured / pin head glass, ordinary quality, cut to required size and shape for windows, etc. in glazing not exceeding 0.5sqm in area with oil putty including hacking off old glass and putty fillings, etc. complete all as specified and as directed | 8 | Sqm | |
| 91 | 91 | S&F in repairs continuous (piano) hinges, mild steel, bright finish or electro-galvanised, width of flaps when open 40mm complete all as specified and as directed | 30 | Rm | |
| 92 | 92 | S&F in repairs 150mm, ordinary rat tail rod pattern helical door springs including roller and roller plate fixed with screws to wooden frames or duly welded to steel frames complete all as specified and as directed | 50 | Each | |
| 93 | 93 | S&F floor door stopper of aluminium alloy body and tongue, overall length of cover plate 140mm, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed | 96 | Each | |
| 94 | 94 | M&L for 2nd class hardwood plain fillets, square, rectangular or triangular in section, area exceeding 13sqcm but not exceeding 25sqcm, clean sawn, secured with nails or brads complete all as specified and as directed | 100 | Rm | |
| 95 | 95 | S&F block boards, 25mm thick, grade 1 quality, exterior grade, commercial type, fixed with screws to timber framework complete all as specified and as directed | 30 | Sqm | |
| 96 | 96 | Supplying, hoisting, fixing and connecting up rotational moulded polythylene water storage tanks (cylindrical vertical with closed top), 500litres capacity, hoisted and fixed in position all as specified in SSR Part-I including connecting the overflow drain out, inlet and outlet pipes, tank nipple, elbow, bend, unions, sockets, etc. complete all as specified and as directed | 5 | Each | |
| 97 | 97 | M&L for laying pre-polished 60mm thick rubber moulded, double glossy, coloured, designer, interlocking tiles made of M-35 design mix concrete of approved design, shape and pattern, conforming to IS: 15658-2006 (updated till date) with the crushing strength not less than 250kg/sqcm laid over and including 25mm thick (compacted thickness) sand bed (rate shall be included) complete all as specified and as directed | 50 | Sqm | |
| 98 | 98 | Laying only pre-polished 60mm thick rubber moulded, designer, interlocking tiles made of M-35 design mix concrete, laid over existing sand bed duly levelled and made good complete all as specified and as directed | 20 | Sqm | |
| 99 | 99 | M&L for cleaning of internal surfaces of RCC / AC / PVC overhead tanks, 250 to 500litres capacity, including staging (if required), at any position / location, by scrubing the surfaces with the help of coir brush, jute cloth and flushing out all the accumulated mud / silt inside the tank, then applying two coats of lime wash on all internal surfaces like wall, ceiling, floor, etc. and writing tank number, capacity of tank, date of cleaning with white synthetic enamel paint over a black synthetic enemal paint base (of suitable dimensions) with size of letter 4" height complete all as specified and as directed | 10 | Each | |
| 100 | 100 | M&L for Atactic Poly Propaneylene (APP) modified bituminous membrane, weight not less than 4.0kg/sqm, reinforced with non-woven polyester fibre @160gm/sqm by torch method as per manufacturer's instructions complete all as specified and as directed \nSpecifications for membrane:\n(i) Softening point 150oC minimum (ii) Cold flexibility (-)2oC minimum\n(iii) Single centre core non-woven polyester reinforcement of not less than 160gm/sqm (iv) Tensile strength of 650N/sqcm and 450N/sqcm in longitudinal and transverse directions respectively (v) Minimum elongation of >20% in both directions (vi) Dimensional stability of 1% maximum (vii) Water tightness / impermiable at 2kgf/sqcm (viii) Water absorption of not more than 1% on mass within 24hrs (ix) Overlaps of minimum 100mm on longitudinal direction and 150mm along transverse direction shall be maintained while laying | 708 | Sqm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
