Indian Institute Of Management-IIMA has published Annual Maintenance Of New Academic Building , Amphitheatre , Instructional Building , Nf-I , Nf-Ii And Nf-Iii , B , C Quarter Buildings , Pgpex Mess And Garage Building And Flats In Genexx Valley In Iimc Campus. Submission Date for this Tender is 05-04-2021. Building Work Tenders in IIM CALCUTTA West Bengal. Bidders can get complete Tender details and download the document.
| Name of Work: Annual maintenance of New Academic Building, Amphitheatre, Instructional Building, NF-I, NF-II & NF-III, B,C quarter Buildings, PGPEX Mess & Garage Building, and flats in Genexx Valley. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | BUILDING SCHEDULE ITEMS | item 1 | ||
| 2 | 2 | Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed\nwithin a lead of 75 m.\na) In all floor including roof. | item 2 | 10 | Cu.M. |
| 3 | 3 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75m.\nIn all floor including roof.\n(a) upto 150 mm. thick | item 3 | 10 | Cu.M. |
| 4 | 4 | Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars.\n(a) In all floor including roof. | item 4 | 2 | Cu.M. |
| 5 | 5 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a\nlead of 75m as directed. | item 5 | 1200 | Sq.M. |
| 6 | 6 | Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge | item 6 | 120 | Cu.M. |
| 7 | 7 | Brick work with 1st class bricks in cement mortar (1:4)\n(a)In superstructure, all floor | item 7 | 10 | Cu.M. |
| 8 | 8 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in all floor. | item 8 | 20 | Sq.M. |
| 9 | 9 | Making one set of scaffolding only for replacing glass panels, painting, uprooting plant and another repairing works of building and S&P works for external works only with 10 cm. dia bamboo as main posts at the rate of 1 metre centre to centre and 7.5 cm. dia bamboo ties @ 0.75 metre apart fitting and fixing with necessary coir, nails etc. as per direction of the Engineer-in- charge. (This item should be executed only after prior approval of the Engineer-in- charge). Firstly, one number to be paid and then labour rate for shifting up to further nineteenth (19) times @ 10% each time to be considered. If necessary further after twenty times of total use, another one number new and labour rate for shifting to be considered accordingly.\na) 3.90 metre height | item 9 | 100 | Each |
| 10 | 10 | b) Extra for additional 3.6 height or part thereof | item 10 | 20 | Each |
| 11 | 11 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in all floor as per relevant IS codes.\na) Pakur Variety | item 11 | 12 | Cu.M. |
| 12 | 12 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in all floor as per relevant IS codes.\na) Pakur Variety | item 12 | 10 | Cu.M. |
| 13 | 13 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of all floor)\n(a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. | item 13 | 25 | Sq.m |
| 14 | 14 | (e) Extra for staging beyond 4 m in any floor (Mode of measurement: area in plan x mean height of staging upto soffit of shuttering above initial 4 m) | item 14 | 1 | Cu.M |
| 15 | 15 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.\n(a) For works in foundation and upto roof of all floor/upto 4 m\nI. SAIL/ TATA/RINL | item 15 | 2 | M.T. |
| 16 | 16 | (a) Applying 2 coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with water in proportion (1 bonding agent : 4 water : 6 cement) as per Manufacturer's specification [Cement to be supplied by the Department] | item 16 | 300 | Sq. M |
| 17 | 17 | (b) Applying 2 coats of Non-Toxic Acrylic Polymer modified Paint having adhesive & waterproofing properties by mixing in proportion (1 liquid: 4 cementitious material) or as per manufacturer's specification for water proofing layer in water tank etc. (No Departmental Cement is required) | item 17 | 85 | Sq. M |
| 18 | 18 | Removing corroded worn out portion of reinforcement (when the area of bar is damaged by more than 25%) by cutting and replacing the same by a new plain round bar of requisite diameter by binding with required lap / welding with old bar, including cost of reinforcement, complete in all respect including removing unserviceable materials from site as per direction of the Engineer - in - charge. Note : Payment on weight (Kg.) of new reinforcement. | item 18 | 85 | Kg |
| 19 | 19 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour.\nIn all floor.\n3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement).\nUsing grey cement\n(iii) 35 mm. thick\n(Add extra @1.5% for each addl. floor upto 4th floor and @1.75% for each additional floor above 4th floor for item No.5 and 6 of subhead A). | item 19 | 10 | Sq. M |
| 20 | 20 | Supplying, fitting and fixing Black Stone slab used in Kitchen slab, alcove, wardrobe etc. laid and jointed with necessary adhesive Cement mortar (1:2) including grinding or polishing as per direction of Engineer-in -Charge in all Floor.\n(a) Slab Thickness 20 to 25 mm\n(Add extra for each addl, floor over the rate for item 22, 25, 26, 17, 20, 31, 32 & 15 of subhead A.\n(I) upto 4 th floor- Rs. 12/-per Sq.m\nII) above 4th floor -Rs. 16/- per Sq.m | item 20 | 150 | Sq. M |
| 21 | 21 | 18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigment matching the stone shade, including grinding & polishing as per direction of Engineer - in - charge to match with the existing work. [Slurry for bedding @ 4.4 kg/Sq.m and pointing @2.0 kg/Sq.m] | item 21 | 5 | Sq. M |
| 22 | 22 | Extra cost of labour for prefinished and premoulded Nosing to treads of steps, railing, window sill etc. of Kota Stone. | item 22 | 5 | m |
| 23 | 23 | Extra cost of labour for grinding Kota Stone Floor in treads and riser of Steps. | item 23 | 5 | Sq. M |
| 24 | 24 | Grinding to marble / mosaic floor including remaining stone, if necessary, after cutting with manual labour / machine,\nwhere necessary | item 24 | 100 | Sq. M |
| 25 | 25 | Supplying, fitting and fixing Marble Slab/tile of 15 to 18 mm thickness in floor, lobby, stair, landing & treads etc. over 20 mm (av.) thck base of Cement mortar (1:2) laid with white cement slurry @ 4.4 kg/Sq.m before placing marble & jointed with white cement slurry @ 2.0 kg/Sq.m with necessary pigments including grinding and Granite polishing as per direction of Engineering -in -Charge in all Floor. {White cement and Pigment to be supplied by the Agency]\n(a) With Makrana plain pink / Adranga Pink / Garbh Gulabi\n/ Udaypur pink / Udaypur Green / Black Bhaslana\n(i) Area of each Slab/tile exceeding 0.60 sq.m but not exceeding 1.00 sq.m. | item 25 | 100 | Sq. M |
| 26 | 26 | Supplying, fitting & fixing granite tiles 10mm to 12mm. thick in columns, wall, facia etc. with 15 thick [avg] cement mortar (1:2) including making suitable arrangements to hold the stones properly by brass / copper hooks including pointing in cement mortar (1:2) (1 white cement : 2 marble dust) with admixture of pigment matching the stone shades all complete as per direction of the Engineer-in-charge including cost of all materials, labours, scaffolding, staging ,curing and roughening of concrete surface complete.\n[Using cement slurry at back side of tiles@ 4.4 kg/sq.m & white cement slurry for joint filling @ 1.8 kg/sq.m]\nArea of each slab upto 0.2 Sq.m | item 26 | 10 | Sq. M |
| 27 | 27 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.\n(A) Floor\nWith Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @\n0.20kg/Sq.m.\n(b) Area of each tile above 0.09 Sq.m\n(ii) Other than Coloured decorative including white\n | item 27 | 100 | Sq. M |
| 28 | 28 | (B) Wall\nWith Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.\n(b) Area of each tile above 0.09 Sq.m\n(ii) Other than Coloured decorative including white | item 28 | 100 | Sq. M |
| 29 | 29 | Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor\n(I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment.\n(A) Deep Colour & White | item 29 | 50 | Sq. M |
| 30 | 30 | Supplying and laying chequered tiles of any shade & of approved quality with (1:1½:3) cement concrete laid in panels or patterns as directed in pavement, footpath etc. including necessary underlay 25 mm thick [avg] cement mortar (1:3) complete in all respect with all labour and materials. [Using cement slurry @ 4.4 kg/Sq.m at back side and @2.4 kg/Sq.m for joint filling]\nRed Variety\n(i) 25 mm. thick | item 30 | 50 | Sq. M |
| 31 | 31 | Supplying& laying 20 mm designer chequered tiles of any shade and of approved quality as per IS: 1237: 1980 laid in patterns as directed in pavement, footpath including necessary underlay 25 mm thick average cement mortar (1:3) complete in all respect with all labour and materials [using cement slurry @ 4.4 kg/Sq.m at back side of tiles. | item 31 | 50 | Sq. M |
| 32 | 32 | Supplying & laying as per IRC-SP:063-2004 paver unit of any shade of approved quality as per relevant IS code, laid in pattern as directed in pavement, footpath, driveway (paver block only), etc including necessary underlay complete in all respect with all labour and material.\n[Border concrete if necessary to be paid separately].\nNote: Sub-grade CBR should not be less than 5.\na) 50 mm thick Tiles as per IS: 1237-2012 for footpath, ramp, staircase of public building (over 25 mm thick (Avg) Cement mortar (1:3) & Cement Slurry @ 4.4 kg/Sq.m at back side of Block. \n | item 32 | 3 | Sq. M |
| 33 | 33 | B) Supplying & laying of approved make and brand of scratch proof, flexible & homogeneous P.V.C. Vinyle flooring conforming to IS:3462 - 1982 in required finish, fixed with synthetic acrylic adhesive after preparing the floor, levelling & smothaning when necessary with suitable putty, as per the design & instruction of the Engineer-in-charge.\n(i) 2 mm thick (Plain) | item 33 | 100 | Sq.M |
| 34 | 34 | Polishing only of old marble or terrazo work with oxalic acid powder using 33 gms/ sq.m. by manual labour / machine where necessary. | item 34 | 3000 | Sq. M |
| 35 | 35 | Taking out Mirzapur or glazed porcelain tiles carefully by chiselling from walls or floor including stacking serviceable material as directed. | item 35 | 100 | Sq.M |
| 36 | 36 | Washing and cleaning with soap water and rubbing with oil cloth in all types of floor and dado. | item 36 | 650 | Sq.M |
| 37 | 37 | Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work)(GCI sheet to be supplied by contractor)\n(i) In Roof:-\na) With 0.60 mm thick sheet | item 37 | 1 | Sq.M |
| 38 | 38 | b) With 0.63 mm thick sheet | item 38 | 1 | Sq.M |
| 39 | 39 | c) With 0.80 mm thick sheet | item 39 | 1 | Sq.M |
| 40 | 40 | Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work).\n(i) In Roof:-\na) With 0.5 mm thick sheet | item 40 | 350 | Sq.M. |
| 41 | 41 | Aluminium sheet ridging fitted with self tapping screws, EPDM washers etc complete.(Minimum 225mm end lapping).\n(A) 300 mm lapping each way\n(a) With 0.71 mm sheet | item 41 | 10 | Mtr. |
| 42 | 42 | Supplying and laying standard four course bituminous water proofing treatment as per specification laid down in I.S. 1346\n- 1991 to be finished with pea size gravel including necessary preparatory works such as shaping mouth of outlets, cutting as and where necessary and refilling with sand and Cement mortar (4:1) or Cement Concrete (1:2:4) with graded stone chips before undertaking the treatment including cutting grooves in parapet and inserting edge of felt and mending good damage complete in all respect as per direction of Engineer - in - Charge including cost of all materials and labours and incidental charges but excluding the cost of Cement Mortar or concrete required for levelling and grading. (In sloped roof Course sand of approved varieties is to be used in place of Pea size gravels as fourth and final course.)\ni) 1st and 3rd Course with bonding materials of hot applied industrial blown type bitumen of grade 85/25 or 90/15 conforming to I.S.702 - 1988 @ 12Kg/10Sqm on each layer.\nA. Over Flat Roof. | item 42 | 1 | Sq.M. |
| 43 | 43 | Supplying & laying 3mm thick pre-fabricated plastomeric water proofing membrane conforming to EN 12311-1 & ASTMD 5147, manufactured with atactic poly propylene (APP) modified premium grade asphalt , specially reinforced with non-woven polyester core with polyester reinforcement @160 gms per sqm & both faces covered with thermo-fusible polyethylene film /MineraL on top face over a coat of primer @ 0.40 lit/sqm of manufacturer's specification on smooth,clean dry surface prepared wherever required.Lap joint shall be provided of 75 mm in longitudinal & 100 mm in transverse direction and fused using LPG/ Propane torch employing extra care ensuring full bondage, complete removal of entrapped air and sealing edges into grooves in appropriate manner as per direction of Engineer -in-charge all complete including materials,labour and applicable taxes. (Payment shall be made on the basis of finished surface area.).\nMembrane Property: Softening Point > 150 deg C, Cold Flexibility < -6 deg C, Tensile Strength, N/cm : 600 (longitudinal), 450 (transverse), Tearing Strength, N: 300 (longitudinal), 200 (transverse) | item 43 | 660 | Sqm. |
| 44 | 44 | Taking out old damaged tarfelt from the roof, parapet etc. preparing the roof surfaces by removing all spoils, blisters, moss etc. from the working site and disposal of the same beyond the compound and cleaning the site in all respect as per direction of Engineer-in-Charge. | item 44 | 500 | Sq.M. |
| 45 | 45 | Repairs to cracks in terraced roof by cutting V-grooves 75 mm. to 100 mm. deep and 150 mm. to 200 mm. wide and filling the same with beaten lime concrete (2:2:7) with lime putty / paste and finishing complete (2 lime putty / paste : 2 surki : 7 brick khoa ) | item 45 | 70 | Metre |
| 46 | 46 | M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete.\nThe rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete.\nPayment to be made on the basis of calculated weight of structural memebrs of MS Holow Section as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a hight of erection 8 m. / 2nd floor level from the all. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part thereof.\ni) For roof truss works\na) Span up to 12 Mtr | item 46 | 0.25 | MT. |
| 47 | 47 | (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in all\nfloor.\n(Add extra @ 1% for each addl. floor upto 4th floor and @ 1.25% for each addl. floor above 4th floor)\n(i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. | item 47 | 10 | Qntl |
| 48 | 48 | Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S. flats as collapsible bracings properly rivetted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete.\nIn all floor. | item 48 | 10 | Sq.m. |
| 49 | 49 | Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing.\nWithout integrated grills.\n(a) Fixed type steel windows as per IS sizes with horizontal glazing bars. | item 49 | 10 | Sq. M. |
| 50 | 50 | (b) Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars. [The extra rate admissible for the openable portion only] | item 50 | 10 | Sq,. M. |
| 51 | 51 | (c ) Extra over item no. 33 (a) and (b) for,\n(i) Fixed type ventilators as per I.S. sizes with horizontal glazing bars height being limited to 580 mm. | item 51 | 10 | Sq,. M. |
| 52 | 52 | (iv) Two point nose steel handle including fitting and fixing. | item 52 | 20 | Each |
| 53 | 53 | (vi) steel peg stay 300 mm long including fitting and fixing. | item 53 | 20 | Each |
| 54 | 54 | (viii) M.S. integrated grill as per approved design integrated with steel window or ventilator, joints continuously welded with M.S. flats and bars. | item 54 | 25 | Kg. |
| 55 | 55 | Welding in M.S. structural work with gas or electric:\n(b) Continuous weld. | item 55 | 31 | cm run |
| 56 | 56 | Renewing bottom rail or top runners of collapsible gate including mending good all damages. | item 56 | 30 | Kg. |
| 57 | 57 | Taking out heavy iron grated door or window (jail pattern or existing) with locking arrangement after cutting out from walls and refixing the same including mending all damages.[Mending charges to be paid separately] | item 57 | 20 | Sq.M. |
| 58 | 58 | Reparing collapsible gate by cutting out all rivets as necessary re- assambling all members including welding pieces of channels, sraightening bent bars and rivetting with new rivets and fitting in position and painting two coats. | item 58 | 10 | Sq.M. |
| 59 | 59 | Easing and oiling, cleaning collapsible gate and repairing to locking arrangements. | item 59 | 10 | Sq.M. |
| 60 | 60 | Renewing hinge of steel shutter including taking out old one by cutting and fixing new hinges by welding and mending good damages complete. | item 60 | 20 | Each |
| 61 | 61 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).\n(d) Sal : LocalSishu, Gamar, | item 61 | 1 | Cu.M |
| 62 | 62 | Supplying, Fitting & Fixing Factory made P.V.C. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, PVC sheet miter cut at two corners and joined with two nos of 1.5 mm long brackets of 15 mm x15 mm M.S. square tube. The two vertical door profiles are to be reinforced with 19 mmx 19 mm M.S. Square tube of 19 gauge, weather seal to be provided through out the frame. The door frame shall be fixed with the wall using 65/100 mm long\nM.S. Screws through the frame by using P.V.C fasteners. A minimum of 4 Nos of screws to be provided for each vertical member and minimum 2 Nos for horizontal member etc. complete as per Manufacturer?s specification and direction of Engineer-in-Charge. | item 62 | 15 | Mtr. |
| 63 | 63 | B. DOOR WINDOW SHUTTER\nPanel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings.\nIn all floor.\n(In case of non-supply of single plank, penal rate of reduction of 20% will be made)\n(iii) 35mm thick shutters with 19mm thick panel of size 30 to 45 cm.\n(b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak. | item 63 | 15 | Sq.M |
| 64 | 64 | Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings in all floor.\n(a) 35 mm thick shutters (single leaf) | item 64 | 25 | Sq.M. |
| 65 | 65 | Supplying, fitting, Fixing Fly / Mosquito proof nylon net on any type of window, door shutter frame with necessary fixing arrangements complete. | item 65 | 15 | Sq.M. |
| 66 | 66 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately)\n(a) 40mm X 6mm, 250mm Length | item 66 | 10 | Each |
| 67 | 67 | Square or hexagonal mesh netting made with 18 B.W.G. galvanised wire, fitted and fixed complete as per design (excluding the supporting framework but including local sal wood battens of size 37.5mmx25mm).\nIn ground floor. | item 67 | 10 | Sq.M. |
| 68 | 68 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark.\n(i) 100mm. X 58mm. X 1.90mm. | item 68 | 10 | Each |
| 69 | 69 | i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting.\n(a) 250mm long | item 69 | 1 | Each |
| 70 | 70 | ii) Brass hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting.(a) 250mm long | item 70 | 10 | Each |
| 71 | 71 | (a) Supplying 'Godrej' mortice lock chromium plated with latch and keys 4 levers, including fitting and fixing complete. | item 71 | 10 | Each |
| 72 | 72 | (b) Supplying 'Godrej' mortice lock chromium plated with keys 6 levers including fitting & fixing complete. | item 71 | 20 | Each |
| 73 | 73 | Door stopper (brass) | item 73 | 100 | Each |
| 74 | 74 | Door stopper (Anodised aluminium) | item 74 | 100 | Each |
| 75 | 75 | ii) Godrej Hydraulic door closer fitted and fixed complete.\n(a) Heavy type | item 75 | 20 | Each |
| 76 | 76 | (b) Medium type | item 76 | 25 | Each |
| 77 | 77 | (A) Iron door ring of approved quality fitted and fixed with nut and washer complete.\n(i) 50mm dia. | item 77 | 50 | Each |
| 78 | 78 | Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:\n(iii) 100mm long x 10mm dia. bolt. | item 78 | 25 | Each |
| 79 | 79 | (vii) 225mm long x 10mm dia. bolt. | item 79 | 25 | Each |
| 80 | 80 | Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete:\n(a) With continuous plate base (Hexagonal/ Round rod)\n(vi) 150 mm grip x 10 mm dia rod. | item 80 | 26 | Each |
| 81 | 81 | (a) Metallic magic eye of approved quality fitted and fixed complete. | item 81 | 25 | Each |
| 82 | 82 | (b) Supplying, fitting fixing Godrej type hydraulic (oil check) floor door spring, heavy duty double action with brass shoe, brass top centre aluminium top cover etc. complete set as per direction of Engineer-in-charge. | item 82 | 10 | Set |
| 83 | 83 | Supplying, fitting and fixing Godrej Multi Lock or equivallent . | item 83 | 30 | Each |
| 84 | 84 | Taking out old iron higes and fitting, fixing the same with new steel screws.\n(e) 100mm. Long butt hinge. | item 84 | 10 | Each |
| 85 | 85 | Renewing iron mortice lock (local best approved quality) 6 lever with handle, connected rods and keys consisting a complete set:\n(a) With chromium plated handle. | item 85 | 50 | Each |
| 86 | 86 | Renewing mortice lock handle with connected rod:\n(a) With chromium plated. | item 86 | 502 | Pair |
| 87 | 87 | Repairs to automatic door closer including replacement of damaged main spring, oiling and adjusting as necessary including taking out and refitting the same. | item 87 | 50 | Each |
| 88 | 88 | Labour for taking out door and window frame including shutter for repair or replacement of different parts of the frame & refixing the same including mending good all damaes complete. (Concrete and brick work for mending damage will be paid separately)\n(a) Upto area 2.5 Sq.m | item 88 | 100 | Sq.M |
| 89 | 89 | Taking out shutter of door and window, dismantling by parts (for repair or replacement of damaged parts) , reassembling and refitting and rehanging same with old fittings but with new screws as necessary. (Where different parts of same shutter are renewed under different item, payment under item 73 will be made once only). | item 89 | 10 | Sq.M |
| 90 | 90 | Easing door and windows | item 90 | 250 | each |
| 91 | 91 | Styles and rails of wooden shutters fitted and fixed complete. (Payment to be made on area of new work only).\n(ii) 35mm Thick shutter. \nSishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak. | item 91 | 10 | Sq.M |
| 92 | 92 | Panel (made of single plank) of door and window shutters to design as directed: (Payment to be made on area of exposed new work). (In case of non-supply of single plank penal rate of reduction to a maximum of 30% will be made).\n19mm thick panel of 30cm to 45cm width \nSishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak. | item 92 | 10 | Sq.M |
| 93 | 93 | Providing and fixing of false ceiling with powder coated exposed G.I. grid suspension system (E-Grid U-1520 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200mm c/c ) consisting of Main Runner 3600 mm long, Cross Tee 1200 mm / 600 mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300mm c/c. The Main Runners to be placed @ 1200 mm. The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm X 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600 mm X 600 mm. Grid of module size 600 mm X 600 mm shall be supported by 6 mm dia\nG.I. wire from purlins / soffit. 15mm thick OW Acoustic Board (Mineral Fiber Acoustic Ceiling Tiles) of approved patern and size 595mm X 595mm with NRC value > 0.65 should be placed in the Grid module to form a False Ceiling. All complete as per the drawing & directions of Engineer-in-charge.\nIn all floor.\na) Acoustic False Ceiling (with 15mm thick OW Acoustic Board and E-Grid U- 1520). | item 93 | 20 | Sq.M |
| 94 | 94 | M.F. suspended ceiling made with 12.5 mm thick Gypsum plaster board including G.I. perimeter channel of 0.55 mm flush (having two flanges 20 mm and 30 mm respectively and web 27 mm ) along with perimeter of ceiling with G.I. intermediate channel of 0.9 mm thick size 45 mmx15mm placed at 750 mm c/c with G.I. ceiling angle of size 25 mmx10mmx0.55 mm thick fixed to the ceiling with G.I. Cleat and steel expansion fastener ceiling section 0.55 mm thick of size 51.50 mmx26mm fixed to the intermediate channels with the help of connecting clip and in the direction of perpendicular to the intermediate channel of 300 mm c/c 12.5 mm thick Gypsum plastered board are to be fixed under ceiling section as above by machine screws. The boards are to be joined and finished with jointing compound, paper tape and application of top coat etc. as per the direction of Engineer-in-charge. (The rate includes of cost of all materials including taxes, cost of accessories, fittings and fixtures, scaffolding and labour charges etc. complete)\nIn all floor | item 94 | 10 | Sq.M. |
| 95 | 95 | Supplying, fitting and fixing of false ceiling framework with powder coated exposed G.I. grid suspension system (E-Grid U-1520 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200mm c/c ) consisting of Main Runner 3600 mm long, Cross Tee 1200 mm / 600 mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300mm c/c. The Main Runners to be placed @ 1200 mm. The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm X 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600 mm X 600 mm. Grid of module size 600 mm X 600 mm shall be supported by\n6 mm dia G.I. wire from purlins/ soffit all complete as per the drawing & directions of Engineer-in-charge. | item 95 | 20 | Sq.M. |
| 96 | 96 | Supplying, fitting and fixing boiling water resistant ply conforming to IS: 303- 1989 bonded with phenol formaldehyde synthetic resin of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in- Charge.[excluding the cost of supporting frame work and teak wood batten/Lipping]\nIn all Floor\n(ii) 6mm | item 96 | 52 | Sq.M. |
| 97 | 97 | (vi) 19mm | item 97 | 60 | Sq.M. |
| 98 | 98 | Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-in- charge.The rate includes the cost of labour, adhesive and all incidental charges thereof.\nIn all floor\nGlossy/Matt/Suede excluding surface texture or metallic lustre.\n(i) Thickness of laminate 1 mm | item 98 | 72 | Sq.M. |
| 99 | 99 | Partition of teak veneer [1 mm] as per design fitted and fixed complete (excluding the supporting frame work & necessary teak wood battens):\nIn all floor\n(i) 4mm thick commercial quality | item 99 | 72 | Sq.M. |
| 100 | 100 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (all floor).[Excluding cost of chipping over concrete surface]\n(ii) With 1:4 cement mortar\n(a) 20 mm thick plaster | item 100 | 250 | Sq.M |
| 101 | 101 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (all floor).[Excluding cost of chipping over concrete surface]\n(ii) With 1:4 cement mortar\n(b) 15 mm thick plaster | item 101 | 250 | Sq.M |
| 102 | 102 | Labour for Chipping of concrete surface before taking up Plastering work. | item 102 | 1 | Sq.M |
| 103 | 103 | Closing gap between door and window frame and jambs with cement mortar (1:3) including removing old mortar (throughout entire surface of contact) and cleaning the joint. (Cement 0.012 Cu.m/100 Mtr.)\n(This item is not payable for new works). | item 103 | 1000 | Mtr |
| 104 | 104 | Cement washing including cleaning and smoothening surface thoroughly (cement to be used @15 kg./100 sq.m. of surface for one coat and @25 kg./100 sq.m of surface for two coats):\nExternal surface (all floor)\n(a) One coat | item 104 | 1 | Sq.M |
| 105 | 105 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In all Floor)\n(a) One Coat\ni) Water based interior grade Acrylic Primer | item 105 | 5000 | Sq.M |
| 106 | 106 | ii) Solvent based interior grade Acrylic Primer | item 106 | 25 | Sq.M |
| 107 | 107 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.\nIn all Floor:\nOne Coat | item 107 | 1000 | Sq.M |
| 108 | 108 | Acrylic Distemper to interior wall, ceiling without acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface.\nTwo Coats | item 108 | 3000 | Sq.M |
| 109 | 109 | Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification.\nIn all Floor:\nOne Coat on new surface | item 109 | 500 | Sq.M |
| 110 | 110 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.\nIn all floor (Two Coat)\na) Normal Acrylic Emulsion | item 110 | 100 | Sq.M |
| 111 | 111 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.\nIn all floor (Two Coat)\nb) Premium 100% Acrylic Emulsion | item 111 | 500 | Sq.M |
| 112 | 112 | Scraping of moss, blisters etc.thoroughly from exterior surface of walls necessitating the use of scraper, wire brush etc.(Payment against this item will be made only when this has been done on the specific direction of the Engineer-in-charge) | item 112 | 500 | Sq.M |
| 113 | 113 | Scraping and removing greasy soot from walls or ceiling of kitchen or similar smoke affected rooms and preparing the surface. | item 113 | 10 | Sq.M |
| 114 | 114 | Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick) | item 114 | 1 | sq.m |
| 115 | 115 | (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. | item 115 | 100 | Sq.M |
| 116 | 116 | (b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. | item 116 | 100 | Sq.M |
| 117 | 117 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :\n(a) On timber or plastered surface :\nWith super gloss (hi-gloss) -\n(i) One coat (with any shade) | item 117 | 100 | Sq.M |
| 118 | 118 | (ii) Two coats (with any shade) | item 118 | 250 | Sq.M |
| 119 | 119 | With other than hi-gloss of approved quality-\n(i) One coat (with any shade) | item 119 | 500 | Sq.M |
| 120 | 120 | (ii) Two coats (with any shade) | item 120 | 100 | Sq.M |
| 121 | 121 | (b) On steel or other metal surface :\nWith super gloss (hi-gloss) -\n(i) One coat (with any shade) | item 121 | 235 | Sq.M |
| 122 | 122 | (ii) Two coats (with any shade) | item 122 | 1 | Sq.M |
| 123 | 123 | (B) Painting with superior quality aluminium paint of approved make and brand including smoothening surface by sand papering etc. on steel surface :\n(a) One coat | item 123 | 100 | Sq.M |
| 124 | 124 | Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) :\n(Two coats)\ni) Standard Quality | item 124 | 10 | Sq.M |
| 125 | 125 | French polishing to wood work including preparing surface (ordinary gloss)\n(b) On old French polished surface including complete removal of the old polish. | item 125 | 50 | Sq.M |
| 126 | 126 | (b) Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick) | item 126 | 500 | Sq.M |
| 127 | 127 | (b) Washing & cleaning the wall surface & ceiling by soft detergent powder & soft water & render the surface free of dust, stain etc. | item 127 | 1 | Sq.M |
| 128 | 128 | Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall)\n(i) 3 mm thick (weighing 7.4 kg/Sq.m) | item 128 | 25 | Sq.M |
| 129 | 129 | (ii) 4 mm thick | item 129 | 25 | Sq.M |
| 130 | 130 | Supplying best Indian figured glass viz. hammered, fluted, ribbed, pinhead etc. type including cutting to required sizes, setting on putty bases and fitted and fixed with nails and putty complete.(\n3 mm thick | item 130 | 25 | Sq.M |
| 131 | 131 | Renewing worn out putty of glass panes :\n(a) Panes not exceeding 0.2 Sq.m | item 131 | 35 | Each |
| 132 | 132 | Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units:-\n(A) Glazed aluminium sliding windows made of extruded and annodized alloy aluminium sectios, fabrications, including cutting to proper shape and size, drilling and aligning of window shutter frame fitted with in built locking arrangements, sliding rollers and other necessary fittings, fixture, adhesives and joineries along with extruded neoprine or EPDM gasketing in between window frame and masonry work (walls, column, beam.lintels etc.) as well as between glass and shutter frame for fixing glass and Polysulphide sealant and in between shutter and window frame where necessary including cutting to requisite size and fixing glass as per drawing, specification and direction of EIC.\nThe rate includes the hire charge of all tools and plants, including all incidental charges, adhesive, joineries such as screw, cleat angle etc. but excluding the cost of extruded aluminium sections, glass, neoprene / EPDM gasket, locking arrangement and rollers.\ni ) 2 track sliding window. | item 132 | 1 | Sq.M |
| 133 | 133 | ii ) 3 /4 track sliding window. | item 133 | 1 | Sq.M |
| 134 | 134 | iii ) Openable / Casement window. | item 134 | 1 | Sq.M |
| 135 | 135 | iv ) Fixed glazing. | item 135 | 1 | Sq.M |
| 136 | 136 | v ) Louvered window. | item 136 | 1 | Sq.M |
| 137 | 137 | Supplying heavy duty hydraulic double action floor spring along with top pin/set of pivots conforming to IS: 6315 or any approved make as per direction of Engineer in charge. | item 137 | 10 | Each Set |
| 138 | 138 | Supplying heavy duty top pin/set of pivots of local make and approved by the Engineer-in-charge. (This item to be provided where floor spring not used). | item 138 | 1 | Pair. |
| 139 | 139 | Supplying PVC rollers for sliding windows as per direction of Engineer\nin charge. | item 139 | 1 | Each |
| 140 | 140 | Supplying maruti lock (100mm) | item 140 | 1 | Pair |
| 141 | 141 | Supplying EPDM gusket of approved make and brand as per direction of Engineer in charge.\ni) For sliding windows | item 141 | 125 | Metre |
| 142 | 142 | Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987.\ni) 4mm thick clear glass. | item 142 | 10 | Sq.M |
| 143 | 143 | ii) 4mm thick coloured / tinted / smoke glass. | item 143 | 10 | Sq.M |
| 144 | 144 | iii) 5mm thick clear glass. | item 144 | 1 | Sq.M |
| 145 | 145 | iv) 5mm thick coloured / tinted / smoke glass. | item 145 | 1 | Sq.M |
| 146 | 146 | Filling the gap in between aluminium frame & adjacent RCC / Brick/ Stone work by providing weather silicon sealant over 6mm dia backer rod of approved quality as per architectural drawings and direction of Engineer-in-Charge complete.\nUpto 5 mm depth and 5 mm width\n(a) all Floor | item 146 | 1 | Mtr. |
| 147 | 147 | Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architectural drawings and direction of Engineer-in-charge.\n10-12 Micron thickness Annodizing film Natural white | item 147 | 30 | Kg. |
| 148 | 148 | Supplying, fitting & fixing of partly glazed partly panelled or fully glazed single leaf Aluminium swing door of all aluminium sections viz door frame ( top and side frame), shutter( top rail, bottom rail, lock rail, door vertical) , glazing clip made of Aluminium Alloy Extrusions conforming to IS: 733-1983 and IS: 1285-1975, annodized conforming to IS:1868- 1983, fitted with all other accessories viz. EPDM gusket,cleat, angle screws etc. including labour charges for fitting and fixing of aluminium door with door spring,/aluminium hinges, glass / Panel board all complete as per architectural drawings and direction of Engineer-in- charge.\n( Excluding cost of glass/ panel board, door spring/ Al hinges, door closer, door stoper, handle, tower bolt and locking arrangment etc)\n10-12 Micron thickness Annodizing film Natural white | item 148 | 30 | Kg. |
| 149 | 149 | Supplying Weather Silicone sealant of approved make and brand for fixing of grove line between the Glasses as per direction of Engineer-in- charge. for Structural Glazing/Curtain wall.\nWeather Silicone sealant for filling the Grove line between Glasses or any other material for facial work | item 149 | 100 | Mtr. |
| 150 | 150 | Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance > 0.5, Mohr's hardness > 5.0, Staining resistance: Class-1, Water Absorption: E < 0.5%], MOR > 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/ epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor).\nb) In all Floor: Sizes-600 mm x600mm x10 mm with breaking strength >\n1500 N | item 150 | 70 | sqm |
| 151 | 151 | PLUMBING & SANITARY SCHEDULE ITEMS | item 151 | ||
| 152 | 152 | Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above all. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)\n(A) For Exposed Work\n(a) (i) 15 mm dia. medium quality | item 152 | 1 | Mtr |
| 153 | 153 | (ii) 20 mm dia. medium quality | item 153 | 1 | Mtr |
| 154 | 154 | (ii) 25 mm dia. medium quality | item 154 | 1 | Mtr |
| 155 | 155 | (ii) 32 mm dia. medium quality | item 155 | 1 | Mtr |
| 156 | 156 | (ii) 40 mm dia. medium quality | item 156 | 25 | Mtr |
| 157 | 157 | (ii) 50 mm dia. medium quality | item 157 | 100 | Mtr |
| 158 | 158 | Supplying, fitting and fixing shower of approved brand and make.\n(a) (i) Chromium plated round shower with revolving joint 100 mm dia with rubid cleaning system (Equivalent to Code No. 542(N) & Model - Tropical / Sumthing Special of ESSCO or similar brand). | item 158 | 20 | Each |
| 159 | 159 | (iii) Chromium plated shower arm 240 mm long (Equivalent to Code No. 536(A) & Model - Tropical / Sumthing Special of ESSCO or similar\nbrand). | item 159 | 10 | each |
| 160 | 160 | (f) Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall Hook (Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar). | item 160 | 60 | each |
| 161 | 161 | (g) PTMT overhead shower ( Prayag or equivalent)\n(i) 75 mm round | item 161 | 1 | each |
| 162 | 162 | Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only).\n(iv) 40 mm dia | item 162 | 1 | each |
| 163 | 163 | (vi) 32 mm dia | item 163 | 1 | each |
| 164 | 164 | (vii) 25 mm dia | item 164 | 10 | each |
| 165 | 165 | (viii) 20 mm dia | item 165 | 10 | each |
| 166 | 166 | (ix) 15 mm dia | item 166 | 1 | each |
| 167 | 167 | Supplying, fitting and fixing bib cock or stop cock.\n(a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand). | item 167 | 10 | each |
| 168 | 168 | (b) (i) Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar | item 168 | 1 | each |
| 169 | 169 | (ii) Chromium plated Concealed Stop Cock (Equivalent to Code No. 514(A) & Model - Tropical / Sumthing Special of ESSCO or similar brand). | item 169 | 1 | each |
| 170 | 170 | (c) (i) Chromium plated Bib Cock (angular shape with wall flange) (Equivalent to Code No. 5037 & Model - Florentine of Jaquar or similar brand). | item 170 | 1 | each |
| 171 | 171 | (ii) Chromium plated Bib Cock with wall flange (Equivalent to Code No. 5047 & Model - Florentine of Jaquar or similar brand). | item 171 | 1 | each |
| 172 | 172 | (e) PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent) 15 | item 172 | 1 | each |
| 173 | 173 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above all. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)\n(a) For Exposed Work\nPVC Pipes (Dia)\n15 mm | item 173 | 30 | metre |
| 174 | 174 | 20 mm | item 174 | 30 | metre |
| 175 | 175 | 25 mm | item 175 | 1 | metre |
| 176 | 176 | Renewing brass spindle and valve of stop cock/bib cock/push cock/pillar\n(i) 15 mm | item 176 | 200 | each |
| 177 | 177 | Dismantling and refixing shower rose after cleaning. | item 177 | 92 | each |
| 178 | 178 | Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above all. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials.\n(a) For Exposed Work\n(i) CPVC Pipes Class-1, SDR-11\n(Dia)\n15 mm | item 178 | 25 | Mtr |
| 179 | 179 | 20 mm | item 179 | 25 | Mtr |
| 180 | 180 | 25 mm | item 180 | 25 | Mtr |
| 181 | 181 | Compact Compact Ball Valve with SS Handle For CPVC/ UPVC Fittings. (As per ASTM D 2467, Schedule 80)\n15 mm | item 181 | 10 | each |
| 182 | 182 | 20 mm | item 182 | 10 | each |
| 183 | 183 | 25 mm | item 183 | 10 | each |
| 184 | 184 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. | item 184 | 5 | each |
| 185 | 185 | Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer\n(b) 1000 litre capacity | item 185 | 1 | each |
| 186 | 186 | Labour for hoisting plastic water storage tank.\n(i) Upto 1500 litre capacity.\n(a) Upto 1st story from G.L. | item 186 | 1 | each |
| 187 | 187 | Supplying, fitting and fixing low-down cistern parts.\n(i) Internal fittings for cistern complete of approved make. | item 187 | 20 | each set |
| 188 | 188 | (ii) Outlet Assembly | item 188 | 20 | each |
| 189 | 189 | (iii) Intlet Assembly | item 189 | 20 | each |
| 190 | 190 | (iv) Rubber Kid | item 190 | 20 | each |
| 191 | 191 | (v) Knob | item 191 | 20 | each |
| 192 | 192 | (vi) Brackets (pair) | item 192 | 1 | each |
| 193 | 193 | Renewing bolts and nuts for cistern. | item 193 | 20 | Each Set |
| 194 | 194 | Renewing high pressure polythene ball cock of approved quality with\npolythene ball and aluminium lever complete for pipe of dia.:\n(i) 25 mm | item 194 | 20 | each |
| 195 | 195 | Renewing polythene ball of approved quality for pipe of dia.:\n(i) 25 mm | item 195 | 20 | each |
| 196 | 196 | Wash basin vitreous china of approved make (without fittings) supplied,fitted and fixed in position on 75mm X 75 mm X 75 mm wood blocks and C.I. brackets including two coats of painting of C.I. brackets.\n(ii) 550 mm X 400 mm size | item 196 | 1 | each |
| 197 | 197 | Supplying, fitting and fixing pedestal of approved make for wash basin | item 197 | 1 | each |
| 198 | 198 | Supplying, fitting and fixing White Vitreous China Sink in position on C.I. brackets including two coats of painting of brackets.\n(a) Plain edge sink with overflow\n(i) 610 mm X 450 mm X 200 mm | item 198 | 10 | each |
| 199 | 199 | Supplying, fitting and fixing stainless steel sink complete with waste\nfittings and two coats of painting of C.I. brackets.\n(a) Sink only\n(i) 530 mm X 430 mm x 180 mm | item 199 | 5 | each |
| 200 | 200 | Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white\nflexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.\n(iii) 600 mm long | item 200 | 1 | each |
| 201 | 201 | Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps.\n(iii) 900 mm long | item 201 | 1 | each |
| 202 | 202 | Supplying, fitting and fixing complete Bottle waste trap (Heavy Quality) (a) Chromium plated Bottle trap 32 mm with 190 mm long connecting pipe and wall flange (Equivalent to Code No. 545 & Model - Tropical / Sumthing Special of ESSCO or similar brand). | item 202 | 1 | each |
| 203 | 203 | Supplying, fitting and fixing Waste fittings complete.\n(a) C.P. over brass\n(i) 32 mm | item 203 | 50 | each |
| 204 | 204 | Supplying, fitting and fixing C.I. bracket including two coats of painting.\n(a) Wash basin, Dental spitton | item 204 | 1 | each |
| 205 | 205 | Supplying, fitting and fixing pillar cock of approved make.\na) (i) CP Pillar Cock - 15 mm. (Equivalent to Code No. 507 & Model -\nTropical / Sumthing Special of ESSCO or similar brand) | item 205 | 10 | each |
| 206 | 206 | a) (ii) CP Pillar Cock Super Deluxe with Aerator - 15 mm. (Equivalent to Code No. 508 & Model No. Tropical / Sumthing Special of ESSCO or\nsimilar brand) | item 206 | 1 | each |
| 207 | 207 | e) (i) CP Centre hole Basin mixture with regular spout without popup waste system with 450 mm long braided hoses. (Equivalent to Code No.5167(B) & Model - FLORENTINE of JAQUAR or similar brand). | item 207 | 1 | each |
| 208 | 208 | e) (ii) CP Wall Mixture without spout but with provision for connnection to Telephone Shower and exposed pipe for Overhead shower (Equivalent to Code No. 5215 & Model - FLORENTINE of JAQUAR or similar brand) | item 208 | 1 | each |
| 209 | 209 | f) (ii) CP 2-way bib Cock - 15 mm, supplied, fitted and fixed. (Code\nNo.5041 & Model - FLORENTINE of JAQUAR or similar brand). | item 209 | 10 | each |
| 210 | 210 | g) CP Sink Cock with Regular Swinging Spout (Table Mounted Model)\n(Equivalent to Code No. 5357 of JAQUAR or similar brand). | item 210 | 5 | each |
| 211 | 211 | Dismantling wash basin with brackets with or without waste fittings. | item 211 | 1 | each |
| 212 | 212 | Refixing wash basin with brackets with or without waste fittings. | item 212 | 1 | each |
| 213 | 213 | Dismantling sink with brackets with or without waste fittings. | item 213 | 1 | each |
| 214 | 214 | Refixing sink with brackets with or without waste fittings. | item 214 | 1 | each |
| 215 | 215 | Dismantling pillar cock of wash basin. | item 215 | 1 | each |
| 216 | 216 | Refixing pillar cock of wash basin. | item 216 | 1 | each |
| 217 | 217 | Cleaning wash basin/ sink with acid. | item 217 | 1 | each |
| 218 | 218 | Cleaning sink with soda and soap. | item 218 | 1 | each |
| 219 | 219 | Dismantling and taking out lead / polythene waste pipe and refixing the same after removing chokage including necessary bendings/ offsets and straightening and replacement of damaged parts, if any | item 219 | 1 | each |
| 220 | 220 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992\n(A) (i) Single Socketed 3 Meter Length\n(a) 75 mm | item 220 | 1 | metre |
| 221 | 221 | (b) 110 mm | item 221 | 50 | metre |
| 222 | 222 | (c) 160 mm | item 222 | 10 | metre |
| 223 | 223 | Scraping the hard scum of 'S' trap carefully to render the flushing flow easy after soaking with strong acid through W.C. pan on floor and also cleaning through flanged junction door underneath the ceiling including necessary scafolding and resetting the flanged door watertight by putty joints by methor labour. | item 223 | 20 | Each |
| 224 | 224 | Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc.\n(a) With 'P' trap | item 224 | 1 | each |
| 225 | 225 | (a) With 'S' trap | item 225 | 1 | each |
| 226 | 226 | Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap (excluding cost of concrete for fixing).\n(i) 580 mm X 440 mm | item 226 | 1 | each |
| 227 | 227 | Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75mm X 75 mm X 75 mm wooden blocks complete.\n(ii) 470 mm X 280 mm X 340 mm | item 227 | 1 | each |
| 228 | 228 | Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete.\n(a) E.W.C.\n(ii) Plastic (hallow type) white | item 228 | 10 | each |
| 229 | 229 | Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete.\ni) Polythene Flush Pipe | item 229 | 1 | each |
| 230 | 230 | Supplying, fitting and fixing urinal flush pipe fittings of approved brand.\n(a) C.P. urinal flush pipe fittings range of one | item 230 | 1 | each |
| 231 | 231 | Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red\nas per I.S. 3438 / 1965 together with brass C.P. hinges.\n(ii) 600 mm X 450 mm | item 231 | 1 | each |
| 232 | 232 | Supplying, fitting and fixing glass shelf with aluminium guard rails.\n(a) Ordinary type with 5.5 mm sheet glass\n(i) 450 mm X 125 mm | item 232 | 1 | each |
| 233 | 233 | Supplying, fitting and fixing liquid soap container.\n(c) Fibre glass | item 233 | 5 | each |
| 234 | 234 | Supplying, fitting and fixing soap holder.\n(a) PTMT (Prayag or equivalent) | item 234 | 1 | each |
| 235 | 235 | Supplying, fitting and fixing PTMT Smart Shelf of approved make of size\n300 mm. | item 235 | 1 | each |
| 236 | 236 | Supplying, fitting and fixing towel rail with two brackets.\n(a) C.P. over brass\n(ii) 25 mm dia. and 600 mm long | item 236 | 1 | each |
| 237 | 237 | Dismantling E.P. or Anglo-Indian W.C. | item 237 | 10 | each |
| 238 | 238 | Refixing E.P. or Anglo-Indian W.C. | item 238 | 9 | each |
| 239 | 239 | Dismantling Orissa pattern W.C. including taking out of base concrete, if necessary, complete. | item 239 | 10 | each |
| 240 | 240 | Refixing Orissa pattern W.C. Including cost of base concrete, if necessary,complete. | item 240 | 10 | each |
| 241 | 241 | Dismantling urinal. | item 241 | 10 | each |
| 242 | 242 | Refixing urinal. | item 242 | 10 | each |
| 243 | 243 | Dismantling flush pipe of water closet. | item 243 | 10 | each |
| 244 | 244 | Refixing flush pipe of water closet. | item 244 | 10 | each |
| 245 | 245 | Cleaning I.P.W.C. with acid. | item 245 | 10 | each |
| 246 | 246 | Cleaning E.P. or Anglo-Indian W.C. with acid. | item 246 | 10 | each |
| 247 | 247 | Cleaning urinal with channel with acid. | item 247 | 10 | Each Set |
| 248 | 248 | Cleaning glazed tiles with acid. | item 248 | 1 | sq. m. |
| 249 | 249 | Removing chokage of water closet. | item 249 | 1 | each |
| 250 | 250 | Removing chokage of urinal and waste trap. | item 250 | 10 | each |
| 251 | 251 | Repairing C.P. hinges of W.C. seat. | item 251 | 100 | each |
| 252 | 252 | Repairing W.C. seat with brass plate and screws. | item 252 | 1 | set |
| 253 | 253 | Cleaning silt of inspection pit. | item 253 | 1 | each |
| 254 | 254 | Removing sludge from septic tank, soak well etc. by methor labour including\ndisposal of the same outside the compound as directed.\n(a) Upto 30 users:-\n(ii) Beyond a lead of 150 metre and outside the Municipal limit | item 254 | 10 | Each |
| 255 | 255 | (c) Upto 50 users:-\n(ii) Beyond a lead of 150 metre and outside the Municipal limit | item 255 | 6 | Each |
| 256 | 256 | (e) Upto 100 users:-\n(ii) Beyond a lead of 150 metre and outside the Municipal limit | item 256 | 4 | Each |
| 257 | 257 | (e) Upto 200 users:-\n(ii) Beyond a lead of 150 metre and outside the Municipal limit | item 257 | 8 | Each |
| 258 | 258 | Cleaning soak pit by removing the top slab and replacing inner filling with jhama bats and repairing the pit as necessary including fitting the slab | item 258 | 1 | each |
| 259 | 259 | Cleaning silt of master trap pit. | item 259 | 30 | each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
