| 1 | 1 | Repair work | BI01010001010000000000000515BI0100001113 | | |
|---|
| 2 | 1.01 | od640/2020_2021 : Dismantling and removing Mangalore tiles over roofs including ridges, hips, valley sheets, wind ties and bordering but excluding roof timber and stacking materials within a distance of 150 m. | BI01010001010000000000000515BI0100001114 | 224 | sqm |
|---|
| 3 | 1.02 | 15.28.2 : Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :Asbestos Sheet | BI01010001010000000000000515BI0100001115 | 40 | sqm |
|---|
| 4 | 1.03 | od641/2020_2021 : Steel work in square/rectangular Pre- galvanised pipes (in single section ) cutting,hoisting and fixing in position including applying a coat of zinc rich primer,closing the free ends with plates of required size etc.complete | BI01010001010000000000000515BI0100001116 | 478 | kg |
|---|
| 5 | 1.04 | od642/2020_2021 : Steel work welded in built up sections,Trusses,ridges,rafters,wall plates and framed work with approved quality square/rectangular pre-Galvanised pipes etc..cutting , fabricating and hoisting including applying a coat of Zinc rich primer and closing the free ends with plates of required size etc. complete. | BI01010001010000000000000515BI0100001117 | 30 | kg |
|---|
| 6 | 1.05 | od643/2020_2021 : Roofing with pre-painted alu zinc (galvalum) trapizoidal sheet of 0.50 mm thick or nearest available thickness with over lap of 150 mm at ends .sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer -in- charge.The sheet shall be fixed using self drilling steel screws/cranck bolt as per direction of departmental officers including plane washer and bituminous washers,self drilling /self tapping screws of size (5.5x55mm)with EPDM seal,complete upto any pitch in horizontal/vertical or curved surfaces,excluding cost of purlins,rafters and trusses and including cutting to size and shape wherever required. | BI01010001010000000000000515BI0100001118 | 260 | sqm |
|---|
| 7 | 1.06 | od644/2020_2021 : Providing Ridge or Hip with pre-painted alu-zinc (factory made-galvalum ) 150 GSM plane sheet 450 mm wide over lap of 150mm at joints including necessary bolts,washers etc, suitable to profile or corrugated sheets,complete | BI01010001010000000000000515BI0100001119 | 64.16 | metre |
|---|
| 8 | 1.07 | od645/2020_2021 : Providing Valley with pre-painted alu-zinc (factory made-galvalum ) 150 GSM plane sheet 900 mm wide over lap of 150mm at joints including necessary bolts,washers etc, suitable to profile or corrugated sheets,complete | BI01010001010000000000000515BI0100001120 | 16 | metre |
|---|
| 9 | 1.08 | 13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | BI01010001010000000000000515BI0100001121 | 32 | sqm |
|---|
| 10 | 1.09 | od646/2020_2021 : Chipping and removing old plastering portions carefully without damaging the existing structure and removing the debris within distance of 150 meters. | BI01010001010000000000000515BI0100001122 | 135 | sqm |
|---|
| 11 | 1.1 | 4.1.5 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001123 | 7 | cum |
|---|
| 12 | 1.11 | 11.46.2 : Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm | BI01010001010000000000000515BI0100001124 | 170 | sqm |
|---|
| 13 | 1.12 | 11.39 : Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS: 15622, of approved make in colours White, Ivory, Grey, fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete. | BI01010001010000000000000515BI0100001125 | 7 | sqm |
|---|
| 14 | 1.13 | 11.36 : Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | BI01010001010000000000000515BI0100001126 | 34 | sqm |
|---|
| 15 | 1.14 | 17.2.1 : Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid | BI01010001010000000000000515BI0100001130 | 2 | each |
|---|
| 16 | 1.15 | 5.9.4 : Centering and shuttering including strutting, etc. and removal of form for:Shelves (Cast in situ) | BI01010001010000000000000515BI0100001147 | 4 | sqm |
|---|
| 17 | 1.16 | 5.22A.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more | BI01010001010000000000000515BI0100001116 | 120 | kg |
|---|
| 18 | 1.17 | 5.3 : Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15<sup>0</sup> landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size). | BI01010001010000000000000515BI0100001117 | 0.6 | cum |
|---|
| 19 | 1.18 | od647/2020_2021 : Supplying and fixing 25mm thick precast ferro cement slabs with CM 1:2 and reinforced with 75 X 75 mm,10g X 10g welded mesh including all charges for fixing in position to the walls in CM and cutting in required shape for fixing sink including all cost of materials, labour, scaffolding charges etc. complete. | BI01010001010000000000000515BI0100001118 | 15 | sqm |
|---|
| 20 | 1.19 | 4.2.2 : Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:11/2:3 (1 cement : 11/2 coarse sand :3 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001119 | 1 | cum |
|---|
| 21 | 1.2 | 17.10.2.3 : Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required:Kitchen sink without drain board470x420 mm bowl depth 178 mm | BI01010001010000000000000515BI0100001120 | 2 | each |
|---|
| 22 | 1.21 | 8.2.2.2 : Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm | BI01010001010000000000000515BI0100001121 | 8 | sqm |
|---|
| 23 | 1.22 | 18.8.2 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.20 mm nominal outer dia pipes | BI01010001010000000000000515BI0100001122 | 16 | metre |
|---|
| 24 | 1.23 | 50.18.8.7.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc 63 mm pipe 4 kgf/ cm2 | BI01010001010000000000000515BI0100001123 | 6 | metre |
|---|
| 25 | 1.24 | 50.18.8.9.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC Solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 110 mm pipe 4 kgf/cm2 | BI01010001010000000000000515BI0100001124 | 4 | metre |
|---|
| 26 | 1.25 | 50.18.9.7.2 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.63 mm dia 4 Kgf/cm2 | BI01010001010000000000000515BI0100001125 | 10 | metre |
|---|
| 27 | 1.26 | 50.18.9.9.2 : Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in CHarge. 110 mm dia 4 Kg/cm2 | BI01010001010000000000000515BI0100001126 | 10 | metre |
|---|
| 28 | 1.27 | 50.18.9.17.2 : Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 4 Kgf/cm2- External work - exposed on wall | BI01010001010000000000000515BI0100001130 | 6 | metre |
|---|
| 29 | 1.28 | od648/2020_2021 : Supplying and fixing 110mm 3 way PVC floor trap with gratings best quality | BI01010001010000000000000515BI0100001161 | 4 | each |
|---|
| 30 | 1.29 | 13.7.2 : 12 mm cement plaster finished with a floating coat of neat cement of mix:1:4 ( 1 cement : 4 fine sand) | BI01010001010000000000000515BI0100001162 | 20 | sqm |
|---|
| 31 | 1.3 | 50.13.1 : 9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete | BI01010001010000000000000515BI0100001163 | 6 | sqm |
|---|
| 32 | 1.31 | 14.1.1 : Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand) | BI01010001010000000000000515BI0100001164 | 13 | sqm |
|---|
| 33 | 1.32 | od649/2020_2021 : provide water cut beeding 15mm wide and 15mm thick in CM1:3 | BI01010001010000000000000515BI0100001165 | 13.6 | metre |
|---|
| 34 | 1.33 | od650/2020_2021 : Carpenter engaged for repairing windows,doors etc. | BI01010001010000000000000515BI0100001166 | 10 | each |
|---|
| 35 | 1.34 | od651/2020_2021 : Coolie engaged for assisting the carpenter | BI01010001010000000000000515BI0100001167 | 10 | each |
|---|
| 36 | 1.35 | 9.70.1 : Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete:125x64x1.90 mm | BI01010001010000000000000515BI0100001168 | 20 | no |
|---|
| 37 | 1.36 | od652/2020_2021 : Supplying and fixing good quality 150mm stainless steel tower bolt with stainless steel screw(heavy duty) | BI01010001010000000000000515BI0100001169 | 20 | each |
|---|
| 38 | 1.37 | od653/2020_2021 : 15 mm nominal bore and 30 cm length PVC connection pipe withP.T.M.T. Nuts | BI01010001010000000000000515BI0100001170 | 2 | each |
|---|
| 39 | 1.38 | 50.17.1.1 : Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. | BI01010001010000000000000515BI0100001171 | 4 | no |
|---|
| 40 | 1.39 | 50.17.1.3 : Supplying and fixing CP Towel rod 60cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. | BI01010001010000000000000515BI0100001172 | 4 | no |
|---|
| 41 | 1.4 | 50.17.1.5 : Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. | BI01010001010000000000000515BI0100001130 | 2 | no |
|---|
