Re Tender_Alappuzha Jp-Pro No - 979/21_Calf Feed Subsidy Program_Construction Of Operation Theatre And Allied Works In A . B . C . Unit Alappuzha Building

Tender Notice

27159944
Re Tender_Alappuzha Jp-Pro No - 979/21_Calf Feed Subsidy Program_Construction Of Operation Theatre And Allied Works In A . B . C . Unit Alappuzha Building
Indian
Kerala
27-02-2021
06-03-2021
08-03-2021

Tender Details

Re Tender_Alappuzha Jp-Pro No - 979/21_Calf Feed Subsidy Program_Construction Of Operation Theatre And Allied Works In A . B . C . Unit Alappuzha Building

Key Value

Document Fees
INR 1586 /-
EMD
INR 11890.00 /-
Tender Value
Refer document

BOQ Items

Work Name:Alappuzha JP-Pro No - 979/21_Calf Feed Subsidy Program_Construction of operation theatre and allied works in A.B.C. unit Alappuzha
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Renovation Works BI01010001010000000000000515BI0100001113
2 1.001 od1069724/2020_2021 : Providing and fixing Wall panelling on Light gauge steel frame work<br>with . Outer face having 9mm thick heavy duty fiber cement board confirming to IS 14862:2000, category<br>IV type A (High pressure steam cured) as per standard sizes fixed with self drilling / taping screws / fasteners @ 60cm c/c of approved make. .(cost of frame work to be paid for<br>separately). BI01010001010000000000000515BI0100001114 53.5 sqm
3 1.002 9.154 : Providing and fixing frame work for partitions/ wall lining etc. made of 50x50x1.6 mm hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 60 cm centre to centre both ways (vertically & horizontally) or at required spacing near opening, with necessary welding at junctions and fixing the frame to wall/ceiling/floors with steel dash fasteners of 8 mm dia, 75 mm long bolt, including making provision for opening for doors, windows, electrical conduits, switch boards etc., including providing with two coats of approved steel primer etc. complete, all as per direction of Engineer-in- charge. BI01010001010000000000000515BI0100001115 382.597 kg
4 1.003 21.1.1.1 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15) BI01010001010000000000000515BI0100001116 50.875 kg
5 1.004 21.3.1 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness BI01010001010000000000000515BI0100001117 16.435 sqm
6 1.005 12.52.3 : Providing and fixing tiled false ceiling of approved materials of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams per sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x 1.6 mm fixed to ceiling with 12.5mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85x 30x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer -in-charge.12.5 mm thick square edge PVC Laminated Gypsum Tile size 595x595 mm made of Gypsum plasterboard , manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyster on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyster film so as to make the tile a completely sealed unit. BI01010001010000000000000515BI0100001118 27.805 sqm
7 1.006 13.26 : Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. BI01010001010000000000000515BI0100001119 84.86 sqm
8 1.007 13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer BI01010001010000000000000515BI0100001120 84.86 sqm
9 1.008 13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work BI01010001010000000000000515BI0100001121 84.86 sqm
10 1.009 11.36 : Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. BI01010001010000000000000515BI0100001122 13 sqm
11 2 Animal Husbandary Shed BI01010001010000000000000515BI0100001123
12 2.001 2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil BI01010001010000000000000515BI0100001124 8.448 cum
13 2.002 4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) BI01010001010000000000000515BI0100001125 5.76 cum
14 2.003 7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand) BI01010001010000000000000515BI0100001126 7.92 cum
15 2.004 5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size BI01010001010000000000000515BI0100001127 1.76 cum
16 2.005 5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more BI01010001010000000000000515BI0100001128 88 kilogram
17 2.006 10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes BI01010001010000000000000515BI0100001129 467.675 kg
18 2.007 50.10.2 : Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete BI01010001010000000000000515BI0100001130 208.575 kg
19 2.008 od1067886/2020_2021 : Providing and fixing aluminium trafford sheet pre-caoted(size shape and pithc corrugations approved by engineer in charge)0.45mm or nearest modified itemn 12.5 approved by PWD BI01010001010000000000000515BI0100001131 101.64 sqm
20 2.009 od1069833/2020_2021 : Providing and fixing precoated Aluminium sheet roofing accessories 0.46 mm (+ 0.05%) total coated thickness, using self drilling/self tapping screws complete:<br>Ridges plain (500-600 mm) BI01010001010000000000000515BI0100001132 30 metre
21 2.01 50.6.2.2 : Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete BI01010001010000000000000515BI0100001133 3.169 cum
22 2.011 10.25.2 : Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works BI01010001010000000000000515BI0100001134 877.26 kg
23 2.012 13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) BI01010001010000000000000515BI0100001135 47.125 sqm
24 2.013 13.7.1 : 12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand) BI01010001010000000000000515BI0100001136 52 sqm
25 2.014 13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer BI01010001010000000000000515BI0100001137 47.125 sqm
26 2.015 13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work BI01010001010000000000000515BI0100001138 47.125 sqm
27 2.016 13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work BI01010001010000000000000515BI0100001139 73.105 sqm
28 2.017 od1070282/2020_2021 : Supplying and installing RCC septic tank inlcuding trenachng, installation back filing etc complete as per the direction of engineer in charge BI01010001010000000000000515BI0100001140 1 each
29 2.018 19.33 : Constructing soak pit 1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. BI01010001010000000000000515BI0100001141 2 each
30 2.019 18.15.2 : Providing and fixing brass bib cock of approved quality :20 mm nominal bore BI01010001010000000000000515BI0100001142 3 each
31 2.02 od1070431/2020_2021 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2 BI01010001010000000000000515BI0100001143 30 metre
32 2.021 50.18.7.2.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge 20 mm dia 10 Kgf/cm2- Internal work - Exposed on wall BI01010001010000000000000515BI0100001144 30 metre
33 2.022 17.10.2.1 : Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required:Kitchen sink without drain board610x510 mm bowl depth 200 mm BI01010001010000000000000515BI0100001145 1 each
34 2.023 50.18.9.6.2 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm dia 6 Kgf/cm2 BI01010001010000000000000515BI0100001146 9.95 metre
35 2.024 od1070654/2020_2021 : Supplying and fixing 1/2 HP Motor and pumpset. BI01010001010000000000000515BI0100001147 1 each
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2021 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail