Kerala Academy for Skills Excellence-KASE has published Upgradation Of Ek Nayanar Memorial Government Iti Kayyur On Par Upgradation Of Ek Nayanar Memoria LGovernment Iti Kayyur On Par With InternationalStandards. Submission Date for this Tender is 08-03-2021. Building Work Tenders in Kayyur, Kasaragode Kerala. Bidders can get complete Tender details and download the document.
Work Name : UP GRADATION OF EK NAYANAR MEMORIAL ITI KAYYUR ON PAR WITH INTERNATIONAL STANDARDS.PHASE 1-REV 3 | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | COVERED COURTS CUM AUDITORIUM CIVIL WORKS | 1 | ||
2 | 1.01 | 2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 2 | 217.704 | cum |
3 | 1.02 | 2.26.1 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil | 3 | 25.617 | cum |
4 | 1.03 | 4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) | 4 | 119.41 | cum |
5 | 1.04 | 4.3.1 : Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns | 5 | 69.207 | sqm |
6 | 1.05 | 2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. | 6 | 445.505 | cum |
7 | 1.06 | 5.33.1 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work upto plinth level | 7 | 87.375 | cum |
8 | 1.07 | 5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete | 8 | 101.924 | sqm |
9 | 1.08 | 5.33.2 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work above plinth level upto floor V level | 9 | 128.667 | cum |
10 | 1.09 | 5.34.1 : Extra for providing richer mixes at all floor levels. Note:- Excess/less cement over the specified cement content used is payable/ recoverable separately.Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum). | 10 | 216.042 | cum |
11 | 1.1 | 5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform | 11 | 216.358 | sqm |
12 | 1.11 | 5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts | 12 | 412.787 | sqm |
13 | 1.12 | 5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers | 13 | 474.497 | sqm |
14 | 1.13 | 5.9.16.1 : Centering and shuttering including strutting, etc. and removal of form for:Edges of slabs and breaks in floors and wallsUnder 20 cm wide | 14 | 282.8 | metre |
15 | 1.14 | 5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more | 15 | 8350.88 | kilogram |
16 | 1.15 | 5.22A.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more | 16 | 20443 | kg |
17 | 1.16 | 5.3 : Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15<sup>0</sup> landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size). | 17 | 12.253 | cum |
18 | 1.17 | od304922/2019_2020 : Providing and laying autoclaved aerated cement blocks masonry with 200 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for separately). | 18 | 167.398 | cum |
19 | 1.18 | 50.6.1.4 : Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete | 19 | 2.041 | cum |
20 | 1.19 | 50.6.2.1 : Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete | 20 | 2.824 | cum |
21 | 1.2 | 13.4.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand) | 21 | 1274.51 | sqm |
22 | 1.21 | 13.4.2 : 12 mm cement plaster of mix:1:6 ( 1 cement : 6 coarse sand) | 22 | 1221.12 | sqm |
23 | 1.22 | 13.16.1 : 6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand) | 23 | 519.733 | sqm |
24 | 1.23 | 22.23.1 : Providing and applying integral crystalline slurry of hydrophilic in nature for\nwaterproofing treatment to the RCC structures like retaining walls of the basement,\nwater tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels\n/ subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts\nintegral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts\nintegral crystalline slurry : 1 part water) for horizontal surfaces and applying the\nsame from negative (internal) side with the help of synthetic fiber brush. The material\nshall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing\npermeability of concrete by more than 90% compared with control concrete as per\nDIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline\nslurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work\nshall be carried out all complete as per specification and the direction of the engineerin-\ncharge. The product performance shall carry guarantee for 10 years against any\nleakage.For vertical surface two coats @0.70 kg per sqm | 24 | 153.36 | sqm |
25 | 1.24 | 11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. | 25 | 200.228 | sqm |
26 | 1.25 | 11.38 : Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of Ist quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete. | 26 | 22.2 | sqm |
27 | 1.26 | od14860/2019_2020 : Providing and fixing Mapple wood court for indoor sports using 21 mm thk seasoned mapple wood 57 to 83mm wide and in random length in tongue and groove shapes, 70mmx45mm hard wood runner treated with anti-termite solution and fixed on the bottom side with 19 mm thick air cushioned pads, stapled through the two wings at 330mm x 330mm. Colour - Teak wood. All works covered by this specification shall be carried by an experienced contractor having sufficient experience in this type of work, Only skilled and experienced persons shall be employed for this purpose. | 27 | 450.5 | sqm |
28 | 1.27 | 11.36 : Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | 28 | 116.761 | sqm |
29 | 1.28 | 13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer | 29 | 1740.86 | sqm |
30 | 1.29 | 13.82.2 : Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture including applying additional coats wherever required, to achieve even shade and colour.Two coats | 30 | 1740.86 | sqm |
31 | 1.3 | 13.47.1 : Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) | 31 | 1274.51 | sqm |
32 | 1.31 | 13.50.3 : Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron /steel works | 32 | 49 | sqm |
33 | 1.32 | 13.84.2 : Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.Two coats | 33 | 49 | sqm |
34 | 1.33 | 9.147.5 : Providing and fixing factory made uPVC white colour casement/casement cum\nfixed glazed windows comprising of uPVC multi-chambered frame, sash and\nmullion (where ever required) extruded profiles duly reinforced with 1.60 +/- 0.2\nmm thick galvanized mild steel section made from roll forming process of required\nlength (shape & size according to uPVC profile), uPVC extruded glazing beads of\nappropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction\nhinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8\nmm size for fixing frame to finished wall, plastic packers, plastic caps and\nnecessary stainless steel screws etc. Profile of frame & sash shall be mitred cut\nand fusion welded at all corners, mullion (if required) shall be also fusion welded\nincluding drilling of holes for fixing hardware's and drainage of water etc. After\nfixing frame the gap between frame and adjacent finished wall shall be filled with\nweather proof silicon sealant over backer rod of required size and of approved\nquality, all complete as per approved drawing & direction of Engineer-in-Charge.\n(Single / double glass panes and silicon sealant shall be paid separately)<br>\nNote: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance\nin dimension i.e. in depth & width of profile shall be acceptable.Casement window double panels with S.S. friction hinges (350 x 19 x 1.9 mm)made of (big series)frame 67 x 60 mm & sash / mullion 67 x 80 mm both havingwall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead ofappropriate dimension. (Area of window above 1.50 sqm). | 34 | 48 | sqm |
35 | 1.34 | 9.147B.1 : 543\nSUB HEAD : 9 - WOOD & PVC WORK\n9.147B\nProviding and fixing factory made uPVC white colour fixed glazed windows/\nventilators comprising of uPVC multi-chambered frame and mullion (where ever\nrequired) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized\nmild steel section made from roll forming process of required length (shape &\nsize according to uPVC profile), , uPVC extruded glazing beads of appropriate\ndimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished\nwall, plastic packers, plastic caps and necessary stainless steel screws etc.\nProfile of frame shall be mitred cut and fusion welded at all corners, mullion (if\nrequired) shall be also fusion welded including drilling of holes for fixing\nhardware's and drainage of water etc. After fixing frame the gap between frame\nand adjacent finished wall shall be filled with weather proof silicon sealant over\nbacker rod of required size and of approved quality, all complete as per approved\ndrawing & direction of Engineer-in-Charge. (Single / double glass panes and\nsilicon sealant shall be paid separately).<br>\nNote: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance\nin dimension i.e. in depth & width of profile shall be acceptable.Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead ofappropriate dimension. (Area upto 0.75 sqm.) | 35 | 1 | sqm |
36 | 1.35 | 21.3.2 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness | 36 | 49 | sqm |
37 | 1.36 | 50.12.2.5 : Providing & fixing Poly carbonate multi wall plain sheet 8 mm thick as approved by the Engineer in charge and should be supplied in a single length of 12 M or as decide by the Engineer in charge. The sheets shall be fixed using self drilling/ self tapping screw of size ( 5.5x55mm) with EPDM seal complete upto any pitch in horizontal /vertical / curved surface, but excluding the cost of purlins, rafters, trusses, and including cutting to size and shapes where ever required. | 37 | 210.836 | sqm |
38 | 1.37 | od14866/2019_2020 : Providing and fixing MS galvalume coated corrugated sheets roofing system (Proflex or approved equivalent) curved to shape, using required thickness of corrugated MS sheets as per design of the vendor (Proflex or approved equivalent); fixed directly to the RCC gutter at ends using necessary holdfasts etc. and without any structural members supporting the sheets in between the span, all in perfect line, level & plumb. The rate shall include all the laps & wastages etc. complete. Only net laid area shall be measured for payment. Ridges, flashings etc. shall not be paid for separately. All the curving shall be done carefully at the site and the sheets lifted and placed by crane. This item shall be executed only by the agency which has all required manufacturing machineries and necessary expertise.<br> | 38 | 627.624 | sqm |
39 | 1.38 | od15276/2019_2020 : Supply and installation of High performance Industrial Roof-Vents(600 mm Dia. self driven roof ventilator) made of aluminum alloy Air Vent, designed to meet AS-2428.1.1993 to wind speed of 200Km/hr and to the entry of wind driven rain at a range of 2.5 L/sec. Under cyclone condition. Roof vents to be fixed on standing seam profile with engineering detail to be designed to make total system as leak proof and to the satisfaction of engineers in-charge. | 39 | 7 | each |
40 | 1.39 | 9.48.2 : Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc | 40 | 833 | kg |
41 | 1.4 | 50.10.1 : Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 41 | 843.342 | kg |
42 | 1.41 | 21.18 : Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge ( Door handle, lock and stopper etc to be paid separately) | 42 | 9.6 | sqm |
43 | 1.42 | od268231/2019_2020 : Supply and fixing ready made galvanized wooden texture Powder coating/Heat transfer/Fluorocarbon laminate painted steel doors with steel jamb,SS hinges & door sill ,sheet thickness of 1to 1.4mm, Cylindrical lock, high security locking systems (Multi lock models having 11 locking points, and can be operated with a single key), honeycomb paper Infilling material, five years warranty on all the hardware and locking system as per satisfaction of site Engineer in charge.The above rate included all fixing and fittings like security locks, hinges, hardware items etc.( Cuirass/I-leaf/GM or approved equivalent.) | 43 | 17.28 | sqm of door area |
44 | 1.43 | od268232/2019_2020 : Supply and fix fully finished Pre Hung Door:-Both side Veneered (Sapeli/ Beech /RC Walnut/RC Teak etc) vertical grains Flush door with matching Veneer Wrapped Engineered wood Jamb (Frame) with front side Architraves and other side Tackers, all with specialised Lacquer Polish. Door of 35 mm thick with 4 side PVC Lipping / Lock Hole Boring (using mortise lock) / Hinge Rebate cutting (4 Nos.) /Extruded Sauerland core / Honey comb core filling. as per drawing and agreed schedule of rates inclusive of all applicable taxes to the satisfaction of site Engineer in charge.The above rate included all fixing and fiting lock, hinges,hardware items etc. ( Jacsons or approved equivalent) | 44 | 8.4 | sqm |
45 | 1.44 | od268233/2019_2020 : Supply and fix fully finished Pre Hung Door:- Both side HP Laminate vertical grain pattern Flush door with matching PVC wrapped WPC Jamb with front side Architrave other side tackers. Door of 35mm thick with 4 side edges painted / Lock Hole Boring (Using mortise lock)/ Hinge Rebate Cutting (4 Nos) ,Jamb width 100 mm. Latch with Lever handles without Keys SS finish - 1 No, Hinges 4" x 3" x 3mm SS finish - 4 Nos .Tower Bolt 6" SS Finish - 1 No.(Jacsons or Approved equivalent) | 45 | 20.581 | sqm of door area |
46 | 1.45 | 17.2.1 : Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid | 46 | 6 | each |
47 | 1.46 | 17.4.1 : Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:One urinal basin with 5 litre white P.V.C. automatic flushing cistern | 47 | 4 | each |
48 | 1.47 | 17.7.1 : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps | 48 | 4 | each |
49 | 1.48 | 17.8 : Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. | 49 | 4 | each |
50 | 1.49 | 17.70.1 : Providing and fixing PTMT Bottle Trap for Wash basin and sink.Bottle trap 31 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the center of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms | 50 | 4 | each |
51 | 1.5 | 17.71 : Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms | 51 | 6 | each |
52 | 1.51 | 18.50.1 : Providing and fixing C.P brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm nominal bore | 52 | 12 | each |
53 | 1.52 | 50.17.1.3 : Supplying and fixing CP Towel rod 60cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. | 53 | 12 | no |
54 | 1.53 | 50.17.1.5 : Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. | 54 | 6 | no |
55 | 1.54 | 18.52.1 : Providing and fixing C.P brass stop cock ( concealed) of standard design and of approved make conforming to IS: 893115 mm nominal bore | 55 | 6 | each |
56 | 1.55 | 18.53.1 : Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore | 56 | 12 | each |
57 | 1.56 | od288217/2019_2020 : Supply & Fixing stainless steel square cockroach proof traps with Gratings MAT finish. Unloading materials supplied at site and storing it in safe place provided in the site. (Make:CHILLY/ ACO/SGS ) | 57 | 14 | each |
58 | 1.57 | od288218/2019_2020 : Providing and fixing 75mm dia Cleanout with Spigot, with SS 304 Square Frame & Round Frame with Flat Round Cover with Rubber Seal & SS Screw including cost and conveyance of all materials, labour charges, sundries etc complete as directed by the Engineer in charge at all levels.(Make:CHILLY/ ACO/SGS ) | 58 | 1 | each |
59 | 1.58 | od288219/2019_2020 : Providing and fixing 100mm dia Cleanout with Spigot, with SS 304 Square Frame & Round Frame with Flat Round Cover with Rubber Seal & SS Screw including cost and conveyance of all materials, labour charges, sundries etc complete as directed by the Engineer in charge at all levels.(Make:CHILLY/ ACO/SGS ) | 59 | 3 | each |
60 | 1.59 | 50.18.8.2.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 20 mm pipe 10 Kgf/ cm2 | 60 | 61 | metre |
61 | 1.6 | 50.18.8.3.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm pipe 10kgf /cm2 | 61 | 14 | metre |
62 | 1.61 | 50.18.8.4.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 32 mm pipe 10Kgf/cm2 | 62 | 17.26 | metre |
63 | 1.62 | 50.18.8.5.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. concealed work, including cutting chases and making good the wall etc. 40 mm pipe 10 kgf/ cm2 | 63 | 6.1 | metre |
64 | 1.63 | 50.18.9.6.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm dia 10Kgf/cm2 | 64 | 5.3 | metre |
65 | 1.64 | 50.18.8.6.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 10 kgf/cm2 | 65 | 5.78 | metre |
66 | 1.65 | 50.18.8.6.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6 kgf/cm2 | 66 | 9 | metre |
67 | 1.66 | 50.18.9.6.2 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm dia 6 Kgf/cm2 | 67 | 4.7 | metre |
68 | 1.67 | 50.18.9.7.1 : Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge. 63 mm dia 6Kgf/cm2 | 68 | 9.2 | metre |
69 | 1.68 | 50.18.9.8.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 75 mm dia 6 Kgf/ cm2 | 69 | 6.15 | metre |
70 | 1.69 | 50.18.9.9.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2 | 70 | 132.7 | metre |
71 | 1.7 | od14775/2019_2020 : Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per the direction of Engineer-in-Charge 160 mm dia 6 Kgf/cm2 - External work- Exposed on wall | 71 | 263.4 | metre |
72 | 1.71 | 50.18.9.10.1 : Providing and fixing PVC pipes includings jointing of pipes with one step pvc solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer in Charge. 150 mm dia 6 Kgf/cm2 | 72 | 26.88 | metre |
73 | 1.72 | od14662/2019_2020 : Extra over for Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all - round underground PVC pipes. | 73 | 27.705 | cum |
74 | 1.73 | 19.4.3.2 : Providing and fixing square-mouth S.W. gully trap class SP -1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:180x150 mm size P typeWith sewer bricks conforming to IS: 4885 | 74 | 2 | each |
75 | 2 | MRAC WORKSHOP CIVIL WORKS | 75 | ||
76 | 2.01 | 2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 76 | 95.14 | cum |
77 | 2.02 | 2.26.1 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil | 77 | 5.95 | cum |
78 | 2.03 | 4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) | 78 | 28.751 | cum |
79 | 2.04 | 4.1.4 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 )1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) | 79 | 5.309 | cum |
80 | 2.05 | 2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. | 80 | 78.875 | cum |
81 | 2.06 | 5.33.1 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work upto plinth level | 81 | 68.172 | cum |
82 | 2.07 | 5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete | 82 | 33.602 | sqm |
83 | 2.08 | 5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform | 83 | 10.65 | sqm |
84 | 2.09 | 5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers | 84 | 210.262 | sqm |
85 | 2.1 | 5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts | 85 | 13.361 | sqm |
86 | 2.11 | 5.9.16.1 : Centering and shuttering including strutting, etc. and removal of form for:Edges of slabs and breaks in floors and wallsUnder 20 cm wide | 86 | 36.92 | metre |
87 | 2.12 | 5.33.2 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work above plinth level upto floor V level | 87 | 28.264 | cum |
88 | 2.13 | 5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more | 88 | 3666.16 | kilogram |
89 | 2.14 | 5.22A.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more | 89 | 4454.11 | kg |
90 | 2.15 | 5.34.1 : Extra for providing richer mixes at all floor levels. Note:- Excess/less cement over the specified cement content used is payable/ recoverable separately.Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum). | 90 | 93.627 | cum |
91 | 2.16 | od304925/2019_2020 : Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick AAC blocks in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand ). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work. | 91 | 3.262 | cum |
92 | 2.17 | od304922/2019_2020 : Providing and laying autoclaved aerated cement blocks masonry with 200 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for separately). | 92 | 39.88 | cum |
93 | 2.18 | 7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand) | 93 | 10.044 | cum |
94 | 2.19 | 5.3 : Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15<sup>0</sup> landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size). | 94 | 3.582 | cum |
95 | 2.2 | 13.4.2 : 12 mm cement plaster of mix:1:6 ( 1 cement : 6 coarse sand) | 95 | 316.053 | sqm |
96 | 2.21 | 13.4.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand) | 96 | 263.075 | sqm |
97 | 2.22 | 13.16.1 : 6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand) | 97 | 34.222 | sqm |
98 | 2.23 | od288243/2019_2020 : Mat polished finish on concrete surface by flooring the process "DENSIFIED FLOOR" Vid. as Grinding the concrete floor using Coarse, Medium diamond grinding tools for removing the latency and minor level difference and opening up the pores in concrete, Densification of the floor using hybrid densifier, Densifier reacts with the UN-hydrated lime present in concrete and makes the concrete surface dense and hard.It offers many benefitssuch as reduced dusting, higher gloss readings, increased abrasion resistance, and a longer lifespan of the concrete floor. For this to achieve, the concrete floor is allowed to be saturated with densifier, sealing with external grade sealer is applied on the floor after polishing to protect the floor from the effects of weather and to make the floor water repellent and stain resistant, burnishing the floor using a floor burnisher to bring about more shine and remove excess sealer from the floor etc in compliance to ASTM C-779 - Standard test method for abrasion resistance on horizontal floor surfaces. This item shall be executed only by the agency which has all required manufacturing machinery and necessary expertise. | 98 | 140.16 | sqm |
99 | 2.24 | 11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. | 99 | 28.315 | sqm |
100 | 2.25 | 11.37 : Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete. | 100 | 7.16 | sqm |
101 | 2.26 | 11.36 : Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | 101 | 22.051 | sqm |
102 | 2.27 | 13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer | 102 | 613.35 | sqm |
103 | 2.28 | 13.82.2 : Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture including applying additional coats wherever required, to achieve even shade and colour.Two coats | 103 | 350.275 | sqm |
104 | 2.29 | 13.46.1 : Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | 104 | 263.075 | sqm |
105 | 2.3 | 13.84.2 : Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.Two coats | 105 | 46.572 | sqm |
106 | 2.31 | od268305/2019_2020 : Supply and install externally 1st quality 600x300x8mm brick pattern design colour ceramic tile wall cladding, tile shall be laid and fixed to pre- plastered walls in patterns, style and forms of grouting and jointing as directed by engineer using approved tile adhesive materials and pointed with approved tile joint filler matching the colour of tiles. | 106 | 2.136 | sqm |
107 | 2.32 | od268306/2019_2020 : Supply and install externally 1st quality 600x300x8mm ceramic tile walls cladding of cement ash or similar different colours, tile shall be laid and fixed to pre plastered walls in patterns, style and forms of grouting and jointing as directed by engineer using approved tile adhesive materials and pointed with approved tile joint filler matching the colour of tiles. | 107 | 12.15 | sqm |
108 | 2.33 | od268308/2019_2020 : Supply Cor-Ten A grade 3mm thick warm rolled perforated cassettes (ASTM A606) fixed to plastered wall spacing in the hidden plastic suspension mounts with stainless steel class | 108 | 6.984 | sqm |
109 | 2.34 | 9.48.2 : Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc | 109 | 368.64 | kg |
110 | 2.35 | 9.147.5 : Providing and fixing factory made uPVC white colour casement/casement cum\nfixed glazed windows comprising of uPVC multi-chambered frame, sash and\nmullion (where ever required) extruded profiles duly reinforced with 1.60 +/- 0.2\nmm thick galvanized mild steel section made from roll forming process of required\nlength (shape & size according to uPVC profile), uPVC extruded glazing beads of\nappropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction\nhinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8\nmm size for fixing frame to finished wall, plastic packers, plastic caps and\nnecessary stainless steel screws etc. Profile of frame & sash shall be mitred cut\nand fusion welded at all corners, mullion (if required) shall be also fusion welded\nincluding drilling of holes for fixing hardware's and drainage of water etc. After\nfixing frame the gap between frame and adjacent finished wall shall be filled with\nweather proof silicon sealant over backer rod of required size and of approved\nquality, all complete as per approved drawing & direction of Engineer-in-Charge.\n(Single / double glass panes and silicon sealant shall be paid separately)<br>\nNote: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance\nin dimension i.e. in depth & width of profile shall be acceptable.Casement window double panels with S.S. friction hinges (350 x 19 x 1.9 mm)made of (big series)frame 67 x 60 mm & sash / mullion 67 x 80 mm both havingwall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead ofappropriate dimension. (Area of window above 1.50 sqm). | 110 | 22.5 | sqm |
111 | 2.36 | 9.147B.1 : 543\nSUB HEAD : 9 - WOOD & PVC WORK\n9.147B\nProviding and fixing factory made uPVC white colour fixed glazed windows/\nventilators comprising of uPVC multi-chambered frame and mullion (where ever\nrequired) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized\nmild steel section made from roll forming process of required length (shape &\nsize according to uPVC profile), , uPVC extruded glazing beads of appropriate\ndimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished\nwall, plastic packers, plastic caps and necessary stainless steel screws etc.\nProfile of frame shall be mitred cut and fusion welded at all corners, mullion (if\nrequired) shall be also fusion welded including drilling of holes for fixing\nhardware's and drainage of water etc. After fixing frame the gap between frame\nand adjacent finished wall shall be filled with weather proof silicon sealant over\nbacker rod of required size and of approved quality, all complete as per approved\ndrawing & direction of Engineer-in-Charge. (Single / double glass panes and\nsilicon sealant shall be paid separately).<br>\nNote: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance\nin dimension i.e. in depth & width of profile shall be acceptable.Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead ofappropriate dimension. (Area upto 0.75 sqm.) | 111 | 0.6 | sqm |
112 | 2.37 | 21.3.2 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness | 112 | 23.1 | sqm |
113 | 2.38 | od268232/2019_2020 : Supply and fix fully finished Pre Hung Door:-Both side Veneered (Sapeli/ Beech /RC Walnut/RC Teak etc) vertical grains Flush door with matching Veneer Wrapped Engineered wood Jamb (Frame) with front side Architraves and other side Tackers, all with specialised Lacquer Polish. Door of 35 mm thick with 4 side PVC Lipping / Lock Hole Boring (using mortise lock) / Hinge Rebate cutting (4 Nos.) /Extruded Sauerland core / Honey comb core filling. as per drawing and agreed schedule of rates inclusive of all applicable taxes to the satisfaction of site Engineer in charge.The above rate included all fixing and fiting lock, hinges,hardware items etc. ( Jacsons or approved equivalent) | 113 | 4.2 | sqm |
114 | 2.39 | od268233/2019_2020 : Supply and fix fully finished Pre Hung Door:- Both side HP Laminate vertical grain pattern Flush door with matching PVC wrapped WPC Jamb with front side Architrave other side tackers. Door of 35mm thick with 4 side edges painted / Lock Hole Boring (Using mortise lock)/ Hinge Rebate Cutting (4 Nos) ,Jamb width 100 mm. Latch with Lever handles without Keys SS finish - 1 No, Hinges 4" x 3" x 3mm SS finish - 4 Nos .Tower Bolt 6" SS Finish - 1 No.(Jacsons or Approved equivalent) | 114 | 3.361 | sqm of door area |
115 | 2.4 | 10.6.2 : Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.20 mm M.S. laths with 1.20 mm thick top cover | 115 | 11.52 | sqm |
116 | 2.41 | 10.7 : Providing and fixing ball bearing for rolling shutters. | 116 | 2 | no |
117 | 2.42 | 10.3 : Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts,locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer . | 117 | 7.2 | sqm |
118 | 2.43 | od268110/2019_2020 : Providing & fixing Poly carbonate multi wall plain sheet 10 mm thick as approved by the Engineer in charge and should be supplied in a single length of 12 M or as decide by the Engineer in charge. The sheets shall be fixed using self drilling/ self tapping screw of size ( 5.5x55mm) with EPDM seal complete upto any pitch in horizontal /vertical / curved surface, but excluding the cost of purlins, rafters, trusses, and including cutting to size and shapes where ever required. | 118 | 7.2 | sqm |
119 | 2.44 | od268326/2019_2020 : Providing and fixing MS galvalume coated corrugated sheets roofing system (Proflex) curved to shape, using required thickness of corrugated MS sheets as per design of the vendor (Proflex or approved equivalent); fixed directly to the RCC gutter at ends using necessary holdfasts etc. and without any structural members supporting the sheets in between the span, all in perfect line, level & plumb. The rate shall include all the laps & wastages etc. complete. Only net laid area shall be measured for payment. Ridges, flashings etc. shall not be paid for separately. All the curving shall be done carefully at the site and the sheets lifted and placed by crane.This item shall be executed only by the agency which has all required manufacturing machineries and necessary expertise. | 119 | 175.8 | sqm |
120 | 2.45 | od15276/2019_2020 : Supply and installation of High performance Industrial Roof-Vents(600 mm Dia. self driven roof ventilator) made of aluminum alloy Air Vent, designed to meet AS-2428.1.1993 to wind speed of 200Km/hr and to the entry of wind driven rain at a range of 2.5 L/sec. Under cyclone condition. Roof vents to be fixed on standing seam profile with engineering detail to be designed to make total system as leak proof and to the satisfaction of engineers in-charge. | 120 | 4 | each |
121 | 2.46 | 17.2.1 : Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid | 121 | 2 | each |
122 | 2.47 | 17.4.1 : Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:One urinal basin with 5 litre white P.V.C. automatic flushing cistern | 122 | 1 | each |
123 | 2.48 | 17.7.1 : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps | 123 | 2 | each |
124 | 2.49 | 17.8 : Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. | 124 | 2 | each |
125 | 2.5 | 17.70.1 : Providing and fixing PTMT Bottle Trap for Wash basin and sink.Bottle trap 31 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the center of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms | 125 | 2 | each |
126 | 2.51 | 17.71 : Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms | 126 | 2 | each |
127 | 2.52 | 50.17.1.3 : Supplying and fixing CP Towel rod 60cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. | 127 | 2 | no |
128 | 2.53 | 50.17.1.5 : Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. | 128 | 2 | no |
129 | 2.54 | od288217/2019_2020 : Supply & Fixing stainless steel square cockroach proof traps with Gratings MAT finish. Unloading materials supplied at site and storing it in safe place provided in the site. (Make:CHILLY/ ACO/SGS ) | 129 | 4 | each |
130 | 2.55 | 18.50.1 : Providing and fixing C.P brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm nominal bore | 130 | 2 | each |
131 | 2.56 | 18.53.1 : Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore | 131 | 4 | each |
132 | 2.57 | 50.18.8.2.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 20 mm pipe 10 Kgf/ cm2 | 132 | 7.13 | metre |
133 | 2.58 | 50.18.8.3.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm pipe 10kgf /cm2 | 133 | 3.02 | metre |
134 | 2.59 | 50.18.8.4.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 32 mm pipe 10Kgf/cm2 | 134 | 1.2 | metre |
135 | 2.6 | 50.18.8.5.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. concealed work, including cutting chases and making good the wall etc. 40 mm pipe 10 kgf/ cm2 | 135 | 3 | metre |
136 | 2.61 | 50.18.9.6.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm dia 10Kgf/cm2 | 136 | 1 | metre |
137 | 2.62 | 50.18.8.6.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6 kgf/cm2 | 137 | 3.5 | metre |
138 | 2.63 | 50.18.9.6.2 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm dia 6 Kgf/cm2 | 138 | 2.34 | metre |
139 | 2.64 | 50.18.9.7.1 : Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge. 63 mm dia 6Kgf/cm2 | 139 | 5 | metre |
140 | 2.65 | 50.18.9.8.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 75 mm dia 6 Kgf/ cm2 | 140 | 4.46 | metre |
141 | 2.66 | 50.18.9.9.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2 | 141 | 12.15 | metre |
142 | 2.67 | od14775/2019_2020 : Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per the direction of Engineer-in-Charge 160 mm dia 6 Kgf/cm2 - External work- Exposed on wall | 142 | 67.4 | metre |
143 | 2.68 | 50.18.9.10.1 : Providing and fixing PVC pipes includings jointing of pipes with one step pvc solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer in Charge. 150 mm dia 6 Kgf/cm2 | 143 | 12.8 | metre |
144 | 2.69 | od14662/2019_2020 : Extra over for Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all - round underground PVC pipes. | 144 | 2.097 | cum |
145 | 2.7 | 19.4.3.2 : Providing and fixing square-mouth S.W. gully trap class SP -1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:180x150 mm size P typeWith sewer bricks conforming to IS: 4885 | 145 | 1 | each |
146 | 3 | FRONT GATE AND SMALL GATE CIVIL WORKS | 146 | ||
147 | 3.01 | 2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 147 | 33.922 | cum |
148 | 3.02 | 2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. | 148 | 18.365 | cum |
149 | 3.03 | 4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) | 149 | 3.454 | cum |
150 | 3.04 | 4.3.1 : Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns | 150 | 6.824 | sqm |
151 | 3.05 | 4.11 : Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). | 151 | 21.6 | sqm |
152 | 3.06 | 5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete | 152 | 3 | sqm |
153 | 3.07 | 5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts | 153 | 14.04 | sqm |
154 | 3.08 | 5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers | 154 | 11.3 | sqm |
155 | 3.09 | 5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform | 155 | 12.75 | sqm |
156 | 3.1 | 5.9.16.1 : Centering and shuttering including strutting, etc. and removal of form for:Edges of slabs and breaks in floors and wallsUnder 20 cm wide | 156 | 20.2 | metre |
157 | 3.11 | 5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more | 157 | 28.125 | kilogram |
158 | 3.12 | 5.22A.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more | 158 | 610.374 | kg |
159 | 3.13 | 5.33.1 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work upto plinth level | 159 | 0.563 | cum |
160 | 3.14 | 5.33.2 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work above plinth level upto floor V level | 160 | 4.327 | cum |
161 | 3.15 | 7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand) | 161 | 14.619 | cum |
162 | 3.16 | 50.6.1.5 : Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete | 162 | 40.417 | cum |
163 | 3.17 | 13.4.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand) | 163 | 277.635 | sqm |
164 | 3.18 | 13.4.2 : 12 mm cement plaster of mix:1:6 ( 1 cement : 6 coarse sand) | 164 | 25.95 | sqm |
165 | 3.19 | 13.16.1 : 6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand) | 165 | 5.44 | sqm |
166 | 3.2 | 11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. | 166 | 5.44 | sqm |
167 | 3.21 | od268305/2019_2020 : Supply and install externally 1st quality 600x300x8mm brick pattern design colour ceramic tile wall cladding, tile shall be laid and fixed to pre- plastered walls in patterns, style and forms of grouting and jointing as directed by engineer using approved tile adhesive materials and pointed with approved tile joint filler matching the colour of tiles. | 167 | 19.576 | sqm |
168 | 3.22 | 13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer | 168 | 286.209 | sqm |
169 | 3.23 | 13.82.2 : Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture including applying additional coats wherever required, to achieve even shade and colour.Two coats | 169 | 286.209 | sqm |
170 | 3.24 | 13.62.1 : Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture . | 170 | 63.6 | sqm |
171 | 3.25 | 9.48.2 : Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc | 171 | 38.4 | kg |
172 | 3.26 | 9.147.5 : Providing and fixing factory made uPVC white colour casement/casement cum\nfixed glazed windows comprising of uPVC multi-chambered frame, sash and\nmullion (where ever required) extruded profiles duly reinforced with 1.60 +/- 0.2\nmm thick galvanized mild steel section made from roll forming process of required\nlength (shape & size according to uPVC profile), uPVC extruded glazing beads of\nappropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction\nhinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8\nmm size for fixing frame to finished wall, plastic packers, plastic caps and\nnecessary stainless steel screws etc. Profile of frame & sash shall be mitred cut\nand fusion welded at all corners, mullion (if required) shall be also fusion welded\nincluding drilling of holes for fixing hardware's and drainage of water etc. After\nfixing frame the gap between frame and adjacent finished wall shall be filled with\nweather proof silicon sealant over backer rod of required size and of approved\nquality, all complete as per approved drawing & direction of Engineer-in-Charge.\n(Single / double glass panes and silicon sealant shall be paid separately)<br>\nNote: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance\nin dimension i.e. in depth & width of profile shall be acceptable.Casement window double panels with S.S. friction hinges (350 x 19 x 1.9 mm)made of (big series)frame 67 x 60 mm & sash / mullion 67 x 80 mm both havingwall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead ofappropriate dimension. (Area of window above 1.50 sqm). | 172 | 2.4 | sqm |
173 | 3.27 | 21.3.2 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness | 173 | 2.4 | sqm |
174 | 3.28 | od268233/2019_2020 : Supply and fix fully finished Pre Hung Door:- Both side HP Laminate vertical grain pattern Flush door with matching PVC wrapped WPC Jamb with front side Architrave other side tackers. Door of 35mm thick with 4 side edges painted / Lock Hole Boring (Using mortise lock)/ Hinge Rebate Cutting (4 Nos) ,Jamb width 100 mm. Latch with Lever handles without Keys SS finish - 1 No, Hinges 4" x 3" x 3mm SS finish - 4 Nos .Tower Bolt 6" SS Finish - 1 No.(Jacsons or Approved equivalent) | 174 | 3.781 | sqm of door area |
175 | 3.29 | 10.25.2 : Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | 175 | 1377 | kg |
176 | 3.3 | od309860/2019_2020 : Supply and install 100mmx100mmx14g thick 6.00 m long Galvanized square hollow section member (AS 1163-2009 Grade min C350L0 AS/NZS 4792 Galvanised coatings on ferrous hollow sections) fixed vertically and anchored to RC parapet and base up stand, will be given a priming coat of Zinc primer as approved by Engineer-in-charge and painted with two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer in-charge for approval before execution). | 176 | 46.2 | metre |
177 | 3.31 | 25.7 : Designing, fabricating, testing, installing and fixing in position Curtain Wall withAluminium Composite Panel Cladding, with open grooves for linear as well ascurvilinear portions of the building , for all heights and all levels etc. including:a) Structural analysis & design and preparation of shop drawings for pressureequalisation or rain screen principle as required, proper drainage of water to makeit watertight including checking of all the structural and functional design.b) Providing, fabricating and supplying and fixing panels of aluminium compositepanel cladding in pan shape in metalic colour of approved shades made out of4mm thick aluminium composite panel material consisting of 3mm thick FR grademineral core sandwiched between two Alumini um sheets (each0.5mm thick). Thealuminium composite panel cladding sheet shall be coil coated, with Kynar500based PVDF / Lumiflon based fluoropolymer resin coating of approved colourand shade on face # 1 and polymer (Service) coating on face # 2 as specified usingstainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backerrods etc.c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanisedwith serrations and serrated washers to arrest the wind load movement, fasteners,SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators toprevent bi-metallic contacts all complete required to perform as per specificationand drawing The item includes cost of all material & labour component, the cost ofall mock ups at site, cost of all samples of the individual components for testing inan approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wallwith aluminium composite panel cladding till the handing over of the building foroccupation. Base frame work for ACP cladding is payable under the relevantaluminium item.s The Contractor shall provide curtain wall with aluminiumcomposite panel cladding, having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, as per theapproved shop drawings and as directed by the Engineer-in-Charge.However, for the purpose of payment, only the actual area on the external face ofthe curtain wall with Aluminum Composite Panel Cladding (including width ofgroove) shall be measured in sqm. up to two decimal places. | 177 | 52.3 | sqm |
178 | 4 | COMPOUND WALL | 178 | ||
179 | 4.01 | 2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 179 | 24.948 | cum |
180 | 4.02 | 4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) | 180 | 3.565 | cum |
181 | 4.03 | 2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. | 181 | 7.128 | cum |
182 | 4.04 | 5.12 : Providing, hoisting and fixing up to floor level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but excluding cost of reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone - III) : 3 graded stone aggregate 20 mm nominal size) | 182 | 0.177 | cum |
183 | 4.05 | 5.22A.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more | 183 | 24.641 | kg |
184 | 4.06 | 7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand) | 184 | 14.256 | cum |
185 | 4.07 | 4.11 : Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). | 185 | 23.76 | sqm |
186 | 4.08 | 50.6.1.5 : Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete | 186 | 10.231 | cum |
187 | 4.09 | 13.4.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand) | 187 | 121.225 | sqm |
188 | 4.1 | 13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer | 188 | 121.225 | sqm |
189 | 4.11 | 13.82.2 : Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture including applying additional coats wherever required, to achieve even shade and colour.Two coats | 189 | 121.225 | sqm |
190 | 4.12 | 10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 190 | 431.266 | kg |
191 | 4.13 | 13.84.2 : Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.Two coats | 191 | 20.936 | sqm |
192 | 4.14 | od268305/2019_2020 : Supply and install externally 1st quality 600x300x8mm brick pattern design colour ceramic tile wall cladding, tile shall be laid and fixed to pre- plastered walls in patterns, style and forms of grouting and jointing as directed by engineer using approved tile adhesive materials and pointed with approved tile joint filler matching the colour of tiles. | 192 | 11.88 | sqm |
193 | 5 | INTERNAL ROADS AND PARKING | 193 | ||
194 | 5.01 | 16.1 : Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres. | 194 | 1591 | sqm |
195 | 5.02 | 16.79 : Providing , laying spreading and compacting graded stone aggregate ( size range 53 mm to 0.075 mm) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub - base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer - in- Charge. | 195 | 318.2 | cum |
196 | 5.03 | 51.16.PC.1pb : Primer Coat - Bitumen Emulsion (SS-1) - Using Packed Bitumen Rates <br>\nProviding and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 - 1.0 kg/sqm using mechanical means as per Technical Specification Clause 502 (low porosity). | 196 | 1591 | sqm |
197 | 5.04 | od14724/2019_2020 : 2.5 cm premix carpet surfacing with 2.25 cum and 1.12 cum of stone chippings of 13.2 mm and 11.2 mm size respectively per 100 sqm and 52 kg and 56 kg of hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively, including a tack coat with hot straight run bitumen, including consolidation with road roller of 6 to 9 tonne capacity etc. complete ( tack coat to be paid for separately): With paving Asphalt grade VG - 10 heated and then mixed with solvent at the rate of 70 grams per kg of asphalt (DSR ITEM NO.16.33.1) | 197 | 2596 | sqm |
198 | 5.05 | 51.16.31.1.2 : Tack Coat - RS Bitumen Emulsion - On bituminous surface @ 0.25 kg /sqm <br> Providing and applying tack coat using bitumen emulsion conforming to IS : 8887, using emulsion pressure distributor including preparing the surface & cleaning with mechanical broom. <br> 1. With Rapid Setting Bitumen Emulsion <br> 2. On bituminous surface @ 0.25 kg /sqm | 198 | 1987 | sqm |
199 | 5.06 | od14731/2019_2020 : Providing and laying seal coat of premixed fine aggregate ( passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG -10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface, including rolling and finishing with road roller all complete.(DSR ITEM NO 16.40) | 199 | 1987 | sqm |
200 | 6 | FOOT PATH, SURFACE DRAINS AND KERBS ETC. | 200 | ||
201 | 6.01 | od14644/2019_2020 : Providing and laying average 100 mm thick sub grade of compacted bed of 20 mm thick nominal size stone aggregate mixed with sand Zone V, including spreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer-in-charge. | 201 | 151.34 | sqm |
202 | 6.02 | 16.42 : Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size ) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete | 202 | 15.135 | cum |
203 | 6.03 | 16.45 : Providing and fixing in position pre- moulded joint filler in expansion joints. | 203 | 10215 | per cm depth per cm width per meter length |
204 | 6.04 | 16.69 : Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature jointed with cement mortar 1:3 ( 1 cement : 3 coarse sand) , including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge ( length of finished kerb edging shall be measured for payment ). ( Precast C.C. kerb stone shall be approved by Engineer-in-Charge) | 204 | 25.718 | cum |
205 | 6.05 | od14682/2019_2020 : two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces | 205 | 68.581 | sqm |
206 | 6.06 | 16.90 : Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. | 206 | 272 | sqm |
207 | 6.07 | od268327/2019_2020 : Construct foundation for lighting pole using M30 concrete of overall size 65x65x160 cm and 4 nos M20x75cm long anchor bolt set in concrete using 4mm thick anchor plate as per the drawing and specification. | 207 | 10 | each |
208 | 6.08 | od14696/2019_2020 : Construct RC drain using 1:1.5:3 mix wall and base 10cm thick of average inside dimensions 40cm wide x 60cm deep covered with 10cm (1:1.5:3) mix precast RC slab etc as per drawing and specification | 208 | 214 | metre |
209 | 7 | EXTERNAL WATER SUPPLY | 209 | ||
210 | 7.01 | 50.18.9.5.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge 40 mm dia 10Kgf/cm2 | 210 | 27.5 | metre |
211 | 7.02 | 50.18.9.6.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm dia 10Kgf/cm2 | 211 | 181.4 | metre |
212 | 7.03 | 50.18.9.16.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 10Kgf/cm2 - External work - Exposed on wall | 212 | 32 | metre |
213 | 7.04 | od14711/2019_2020 : Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge. 63 mm dia 10Kgf/cm2 | 213 | 14 | metre |
214 | 7.05 | od14713/2019_2020 : Providing and fixing PVC pipes including fixing the pipe with clamps/ clip at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 10 Kgf/cm2 - External work - Exposed on wall | 214 | 17.7 | metre |
215 | 7.06 | od14662/2019_2020 : Extra over for Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all - round underground PVC pipes. | 215 | 8.55 | cum |
216 | 7.07 | od275595/2019_2020 : Supply, install and testing approved make forged brass ball valves full bore and thread conforming to IS 1703with all necessary fittings & accessories ie, unions, connectors,adapters, PTFE tape etc.complete as directed and specified, 32mm full bore. | 216 | 1 | each |
217 | 7.08 | od275596/2019_2020 : Supply, install and testing approved make forged brass ball valves full bore and thread conforming to IS 1703with all necessary fittings & accessories ie, unions, connectors,adapters, PTFE tape etc.complete as directed and specified, 40mm full bore.<br> | 217 | 5 | each |
218 | 7.09 | 18.32.1 : Constructing masonry chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for stop cock, with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 \n(1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design:With common burnt clay F.P.S (non modular) bricks of class designation 7.5 | 218 | 4 | each |
219 | 7.1 | 18.19.4.1 : Providing and fixing gun metal non-return valve of approved quality (screwed end):50 mm nominal boreHorizontal | 219 | 1 | each |
220 | 7.11 | od17116/2019_2020 : Supply installation testing and commissioning of water treatment plant 2000 LPH capacity with Pressure Sand filter,Activated Carbon filter, Float switches 2 nos,Filter feed pump (2000 lph,20-25 m head),chemical dosing pump((0-10) lph with all accessories complete as per the direction of engineer in charge | 220 | 1 | each |
221 | 8 | EXTERNAL SEWERAGE AND RAIN WATER DRAINAGE | 221 | ||
222 | 8.01 | 50.18.9.9.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2 | 222 | 23.86 | metre |
223 | 8.02 | 50.18.9.10.1 : Providing and fixing PVC pipes includings jointing of pipes with one step pvc solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer in Charge. 150 mm dia 6 Kgf/cm2 | 223 | 274.8 | metre |
224 | 8.03 | od14662/2019_2020 : Extra over for Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all - round underground PVC pipes. | 224 | 21.997 | cum |
225 | 8.04 | 19.7.1.1 : Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design:Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weigh of cover 23 kg and weight of frame 15 kg):With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | 225 | 29 | each |
226 | 8.05 | 19.7.2.1 : Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design:Inside size 120x90 cm and 90 cm deep including C.I. cover with frame ( medium duty ) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg ( weight of cover 58 kg and weight of frame 58 kg):With common burnt clay F.P.S ( non modular) bricks of class designation 7.5 | 226 | 4 | each |
227 | 8.06 | 19.8.1.1 : Extra for depth for manholesSize 90x80 cmWith common burnt clay F.P.S. ( non modular ) bricks of class designation 7.5 | 227 | 4.35 | metre |
228 | 8.07 | 19.8.2.1 : Extra for depth for manholesSize 120x90 cmWith common burnt clay F.P.S. ( non modular ) bricks of class designation 7.5 | 228 | 0.6 | metre |
229 | 8.08 | 51.19.ST4 : Supplying and installing ready made PVC Septic tank including the cost of carriage, trenching, placing at the level below ground level as specified as per the direction of engineer in charge (Provision for CC/RCC/Sand/06mm aggregate for the preparation of bed shall be paid separately)<br>\n4. 35 to 50 flush capacity | 229 | 3 | each |
230 | 8.09 | 19.33 : Constructing soak pit 1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. | 230 | 2 | each |
231 | 8.1 | od17127/2019_2020 : Supply all material and construct RCC rain water filtration tank cum collection tank of overall size 7.6x2.40x2.45m using 1:1.5:3 concrete mix etc. all complete as per the drawing and specification. | 231 | 1 | each |
232 | 8.11 | od17130/2019_2020 : Supplying and installing ready made Pre cast RCC Water tank including the cost of carriage, trenching, placing at the level below ground level as specified as per the direction of engineer in charge (5000 L Capacity ) | 232 | 8 | each |
233 | 9 | ARCHITECTURAL UP GRADATION | 233 | ||
234 | 9.01 | 14.53.1 : Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work | 234 | 2500 | sqm |
235 | 9.02 | 14.54.1 : Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give even shade:One or more coats on old work | 235 | 206 | sqm |
236 | 9.03 | 14.46 : Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | 236 | 2400 | sqm |
237 | 10 | PLAY GROUND | 237 | ||
238 | 10.01 | 2.28.1 : Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil | 238 | 9775 | sqm |
239 | 10.02 | 4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) | 239 | 6 | cum |
240 | 10.03 | 5.1.3 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | 240 | 32 | cum |
241 | 10.04 | 5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete | 241 | 320.001 | sqm |
242 | 10.05 | 5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more | 242 | 2512 | kilogram |
243 | 10.06 | 50.2.26.1 : Filling with contractor own earth (excluding rock) in open areas in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge. | 243 | 2932.5 | cum |
244 | 11 | SIGNAGE AND BOARD | 244 | ||
245 | 11.01 | od275653/2019_2020 : Providing and fixing of Advance Direction / Way finding / Reassurance Sign board of size 1000 mm x 1500 mm made out of Type-XI encapsulated lens type retro reflective sheeting wide. Base Sheeting shall be of White Color type IV class B retro reflective sheeting fixed over 2 mm thick Aluminium Composite Material sheet with area exceeding 0.9 sqm fixed over back support frame of M.S.Angle 35 x 35 x 5 mm all round mounted on two 50 mm dia MS Pipe with clear height of not less than 2.1 m from the ground level to the bottom of the board as per approved drawings.<br>The sign post should be painted with one coat of red oxide paint and two coats of 1 st quality synthetic enamel paint Black & white colour with bands of 30 cm height. The sign post shall be firmly fixed in to the ground by means of properly designed foundation with M15 grade concrete size 450mm x 450mmx 600 mm, including cost,conveyance of all materials, equipment,machinery and labour with all leads and lift,loading charges necessary for satisfactory completion of the work as directed by Engineer in-Charge. | 245 | 2 | each |
246 | 11.02 | od275654/2019_2020 : Supply and fixing sticker type signage at site (on door or similar locations) in proper line & level. The signage letters shall be made with premium quality vinyl sheet of approved colour, pasted on “3M”make self-adhesive film of approved colour, including supply of all material labour etc. required for proper completion of work. Before making the signage text & font of letters in best fit size will be set in computer so as to give aesthetic look as per sample available with ITD | 246 | 7980 | sqcm |
247 | 11.03 | od275655/2019_2020 : Supply and fixing bilingual signage in English. The signage letters will be made with premium quality vinyl sheet of approved colour, pasted on 3mm thick aluminium composite panel backing. The signage will be either fixed on the wall with the screws & double tape or hanged from the false ceiling with the help of hooks & chains complete work. | 247 | 12399.2 | sqcm |
248 | 11.04 | od275656/2019_2020 : Supply & fixing 5 mm thick aluminum compressed Panel (ACP) sheet in the required size for building name signage. The sheet will be cut into size as per the size of signage to be fixed in position (Stone façade, grit wash, gypsum board etc.) with screws & tape including s/o all material labour T&P etc. required for proper completion of work. | 248 | 21000 | sqcm |
249 | 11.05 | od275657/2019_2020 : Supply & fixing stainless steel (SS) letters made with SS-304 grade 20 gauge sheet as per the approved size & shade including fixing on ACP sheet in required height line & level including s/o all T&P etc. required for proper completion of work. Before making the letters the font & size will be got approved from ITD. | 249 | 19950 | sqcm |
250 | 11.06 | od275658/2019_2020 : Supply and fixing symbol signage such as No. Smoking, No Spitting, Drinking Water etc. signage of standard sizes as per conventional design/ colour code on 3 mm thick aluminium composite panel. The signage will be either fixed on the wall with the help of screws & double tape or hanged from the false ceiling with the help of chain & screws etc. complete work. | 250 | 3192 | sqcm |
251 | 11.07 | od275659/2019_2020 : Printing of floor plans on approx. A2 size poster sheet with indelible ink framing the same in 3mm thick acrylic sheet and 1” studs complete. The floor plans will be fixed on the wall with the help of screws and double tape etc. to give neat & finished look | 251 | 5 | each |
252 | 12 | COVERED COURTS CUM AUDITORIUM ELECTRICAL WORKS | 252 | ||
253 | 12.01 | od260426/2019_2020 : Supply, Installation, Testing and commissioning of 6 KVA UPS with 1 hourbattery back up complete with all accessories as required | 253 | 1 | set |
254 | 12.02 | od260443/2019_2020 : Supply of 10 sqmm 4 core PVC/XLPE insulated armoured cable with aluminium conductors for working voltages up to and including 1100 volts conforming IS 1584/part I/1988 for PVC IS 7098 part I for XLPE | 254 | 30 | metre |
255 | 12.03 | od260448/2019_2020 : Supply of 16 sqmm 4 core PVC/XLPE insulated armoured cable with aluminium conductors for working voltages up to and including 1100 volts conforming IS 1584/part I/1988 for PVC IS 7098 part I for XLPE | 255 | 3 | metre |
256 | 12.04 | od260451/2019_2020 : Supply of 25 sqmm 4 core PVC/XLPE insulated armoured cable with aluminium conductors for working voltages up to and including 1100 volts conforming IS 1584/part I/1988 for PVC IS 7098 part I for XLPE | 256 | 86 | metre |
257 | 12.05 | 9.1.32 : Supplying and making end termination with brass compression gland and aluminium lugs for \nfollowing size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV \ngrade as required.4 X 10 sq. mm (25mm) | 257 | 2 | set |
258 | 12.06 | 9.1.34 : Supplying and making end termination with brass compression gland and aluminium lugs for \nfollowing size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV \ngrade as required.4 X 25 sq. mm (28mm) | 258 | 2 | set |
259 | 12.07 | 9.1.33 : Supplying and making end termination with brass compression gland and aluminium lugs for \nfollowing size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV \ngrade as required.4 X 16 sq. mm (28mm) | 259 | 2 | set |
260 | 12.08 | 7.1.1 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of\nfollowing size direct in ground including excavation, sand cushioning, protective covering and\nrefilling the trench etc as required.Upto 35 sq. mm | 260 | 81 | metre |
261 | 12.09 | 7.7.1 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV\ngrade of following size on wall surface as required.Upto 35 sq. mm (clamped with 1mm thick saddle) | 261 | 31 | metre |
262 | 12.1 | 1.21.2 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm | 262 | 250 | metre |
263 | 12.11 | 1.21.3 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.32 mm | 263 | 31 | metre |
264 | 12.12 | 2.3.4 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator16 way, Double door | 264 | 1 | each |
265 | 12.13 | 90.11.1.15 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required | 265 | 1 | each |
266 | 12.14 | 90.11.1.12 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required | 266 | 1 | each |
267 | 12.15 | 2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole | 267 | 36 | each |
268 | 12.16 | 2.10.4 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole | 268 | 4 | each |
269 | 12.17 | 2.13.1 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps | 269 | 1 | each |
270 | 12.18 | 2.13.2 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps | 270 | 1 | each |
271 | 12.19 | 2.15.2 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual \n current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps | 271 | 2 | each |
272 | 12.2 | 2.15.3 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual \n current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps | 272 | 1 | each |
273 | 12.21 | 2.14.1 : Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual\ncurrent circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps | 273 | 1 | each |
274 | 12.22 | od268273/2019_2020 : Supply & Fixing of 25/32 A DP MCB isolator | 274 | 1 | each |
275 | 12.23 | 1.14.1 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire | 275 | 280 | metre |
276 | 12.24 | 1.14.2 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire | 276 | 220 | metre |
277 | 12.25 | 1.24.1 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch | 277 | 15 | each |
278 | 12.26 | 1.24.3 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch | 278 | 8 | each |
279 | 12.27 | 1.24.4 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet | 279 | 15 | each |
280 | 12.28 | 1.24.5 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet | 280 | 8 | each |
281 | 12.29 | 1.24.7 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.TV antenna socket outlet | 281 | 1 | each |
282 | 12.3 | 1.27.1 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm) | 282 | 28 | each |
283 | 12.31 | 1.27.2 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm) | 283 | 11 | each |
284 | 12.32 | 1.27.4 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm) | 284 | 6 | each |
285 | 12.33 | 1.10.3 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC\ninsulated copper conductor single core cable in surface / recessed medium class PVC conduit,\nwith modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS\nPVC insulated copper conductor single core cable etc as required.Group C | 285 | 68 | point |
286 | 12.34 | 1.55.3 : Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C | 286 | 51 | point |
287 | 12.35 | od260505/2019_2020 : Supply and laying of one number of 10 SWG Copper wire on wall/ surface/ recessed conduit etc. | 287 | 30 | metre |
288 | 12.36 | 5.2 : Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providingmasonry enclosure with cover plate having locking arrangement and watering pipe etc. withcharcoal/ coke and salt as required | 288 | 2 | set |
289 | 12.37 | od260416/2019_2020 : Supplying and laying 10 SWG Cu wire at 0.50 metre below ground level for conductor earth<br>electrode, including connection/ termination with GI thimble etc. as required. | 289 | 40 | metre |
290 | 12.38 | od260472/2019_2020 : Supply, installation , testing and commissioning of Wall fan of 300mm sweep dia on wall, fixing necessary anchor bolts / bolt and nuts etc., as required including giving connections with the supplied wire along with the Wall fan.<br>300mm sweep wall fan working on 230 V A/C | 290 | 1 | each |
291 | 12.39 | od260502/2019_2020 : Supply, installation , testing and commissioning of exhaust fans of size up to 450mm in the existing opening, fixing necessary anchor bolts / bolt and nuts etc., as required including giving connections with the supplied wire along with the exhaust fan.<br>300/305 mm sweep Light Duty Exhaust fan in metal frame working on 230 V A/C | 291 | 2 | each |
292 | 12.4 | 90.3.19.3 : Supply conveyance, installation, testing and commissioning the light fittings of following types made from CRCA sheet 0.5mm thickness with all accessories and lamps directly on wall and giving connections with 16/0.20 mm 3 core PVC insulated and sheathed round copper conductor flex wire or extending the original wiring and giving connections as required | 292 | 28 | each |
293 | 12.41 | 90.4.5.2 : Supply, conveyance, installation, testing and commissioning of ceiling fans of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required. | 293 | 24 | each |
294 | 12.42 | 90.4.1 : Supply and installation of suitable size MS rod type fan clamp in the RCC slab as per IS 732 as required. | 294 | 24 | each |
295 | 12.43 | 1.53.1 : Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable | 295 | 140 | metre |
296 | 12.44 | od261417/2019_2020 : Supply, Installation, Testing and commissioning Of distribution box for CCTV 6Ux600Wx600D With Front Glass Door,Side Openable Panels with Lock & Key,4Way 5A PDU,1U Cable Manager,Cooling Fan,H/W Kit10 | 296 | 1 | no |
297 | 12.45 | od261212/2019_2020 : SITC Of 350W RMS MIXER AMPLIFIER, 3 MIC, 2 AUX, 100V/70V AND 4OHMS , BALANCED MIC,FREQUENCY RESPONSE (50 HZ-16000HZ),S/N RATIO-MIC1,2,3,4:66DB;AUX 1:80 DB,THD-LESS THAN 1% AT 1 KHZ,1/3 RATED POWER, MUTING FUNCTION-MIC 1 OVERRIDES OTHER INPUT SIGNALS WITH 0-30 DB ATTENUATION,CONTROLS-INDIVIDUAL GAIN CONTROLS, POWER SWITCH;BASS: 10DB AT 100HZ,TREBLE: 10DB AT10000HZ. | 297 | 1 | each |
298 | 12.46 | od261213/2019_2020 : Supply, Installation, Testing and commissioning of XLR cables and connectors | 298 | 6 | each |
299 | 12.47 | od261214/2019_2020 : Supply & laying of twin twisted 2x1.5 sqmm Cu flexible wire 1.1 kv grade PVC insulated through PVC conduit. | 299 | 110 | metre |
300 | 12.48 | od261215/2019_2020 : Supply, installation, testing and commissioning of indoor IR IP dome camera 2 MP 2.1mm/4mm/6mm focal length lens capable to 1.0 lux sensitivity, with IR n 480 TV lines. | 300 | 4 | each |
301 | 12.49 | od261216/2019_2020 : Supply, installation, testing and commissioning of Outdoor IR IP bullet camera 2 MP 2.1mm/4mm/6mm focal length lens capable to 1.0 lux sensitivity,with IR 480TV lines. | 301 | 1 | each |
302 | 12.5 | od261705/2019_2020 : Supply and laying of Cat6 outdoor cable including necessary connectors<br> | 302 | 50 | metre |
303 | 12.51 | od261605/2019_2020 : Supply, installation, testing and commissioning of 24" Monitor for CCTV | 303 | 1 | no |
304 | 12.52 | od261606/2019_2020 : SITC Of NVR 8 Channel for CCTV | 304 | 1 | no |
305 | 12.53 | 1.33 : Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden blockincluding connection etc as required. | 305 | 2 | each |
306 | 12.54 | od260393/2019_2020 : Supply, installation, testing and commissioning of LAN socket. | 306 | 4 | no |
307 | 12.55 | od260518/2019_2020 : Supply, installation, testing and commissioning of 16W wall mount speaker 86db/W | 307 | 7 | no |
308 | 12.56 | od260498/2019_2020 : Supply, installation, testing and commissioning of 5W LED wall light working on 230V, 50 Hz AC, including giving connections as required. | 308 | 22 | each |
309 | 12.57 | od260520/2019_2020 : SITC of Rust Resistant and Weather-Proof Bulk head light fixture with 9W LED lamp, IP 65 protection complete with all other accessories as required. | 309 | 4 | no |
310 | 12.58 | od261703/2019_2020 : SITC of D-Link (DIR-878) AC1900 MU-MIMO 1900Mbps Wi-Fi Router (Without Modem) | 310 | 1 | each |
311 | 12.59 | od260521/2019_2020 : SITC of 50W high bay light working on 230V 50Hz AC supply for indoor purpose complete with all other accessories as required | 311 | 40 | each |
312 | 13 | COVERED COURTS CUM AUDITORIUM FIRE FIGHTING WORKS | 312 | ||
313 | 13.01 | od262941/2019_2020 : (Kayyur) 7.7: Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS<br>3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets<br>etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with<br>two or more coats of synthetic enamel paint of required shade complete as required :<br>100mm dia pipe | 313 | 12 | per metre |
314 | 13.02 | od262942/2019_2020 : (Kayyur) 11.5 : Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with<br>bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets<br>conforming to IS 13095 of following sizes as required :100mm dia | 314 | 5 | each |
315 | 13.03 | od262943/2019_2020 : (Kayyur )9.2: Supplying and fixing single headed internal hydrant valve with instantaneous<br>Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming<br>to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :Single headed Stainless steel | 315 | 1 | each |
316 | 13.04 | od261901/2019_2020 : Supply, installing, testing and commissioning of Fire Extinguisher dry chemical<br>powder type ISI mark, 5 kg capacity with initial charger and<br>installation<br>brackets.Make - Safex / Warrior / Intime | 316 | 6 | each |
317 | 13.05 | od263978/2019_2020 : (Kayyur) 16.2: Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female<br>couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : Stainless Steel (Grade 304) (Sythetic fibre circular woven jackated rubber lined fire hose delivery having 38Kg. Per Cm. Sq. burst pressure,<br>28Kg. Per Cm. proof pressure, 14Kg. Per Cm. working<br>pressure as per IS:636 (ISI Marked) Type A in 15 Meters<br>length, 63mm dia duly copper via bounded two coupling<br>pair of male female parts any duly intantanous type,<br>63mm size as per IS:903 (ISI Marked)) | 317 | 1 | each |
318 | 13.06 | od260392/2019_2020 : Providing 63mm (2½ )" dia 15 m long canvas hose pipe complete with stainless steel male & female coupling stainless steel wire wound with the pipe The pipe shall confirm to IS. 4927. Make: ISI Approved. | 318 | 1 | each |
319 | 13.07 | od260400/2019_2020 : M.S Hose Cabinet : - Providing & fixing M.S Hose cabinet door with powdercoating of postal red color (of size minimum 1200mm wide, 2100mm height) madeof M.S sheet 14 G with glass front door and locking arrangement to accommodate2-hoses, one branch pipe and to accommodate F.A. hose reel in addition forinternal hydrant complete as per direction of Engineer incharge | 319 | 1 | each |
320 | 13.08 | od260406/2019_2020 : Providing and fixing 63 mm dia standard stainless steel short Branch Pipe female instantaneous inlet, male threaded outlet, complete with hexagonal base nozzle as per IS 903 with 20 mm nozzle complete with fixing clamps. Make: Essel/Priyanka/Newage | 320 | 1 | each |
321 | 13.09 | od260415/2019_2020 : Providing and fixing Fire Man axe as required with Test Certificate of 20,000 volts.Make : - ISI Approved.<br><br><br> | 321 | 1 | each |
322 | 13.1 | od260418/2019_2020 : ESCAPE ROUTE SIGNS :- Supply & installing in position self glowing " EXIT " sign board to guide the occupants towards the exits of size 100mm x 300 mm made of luminescent safely, rigid sheet in green colour, photo luminescent rigid sheet with two each hanging chains & necessarry supports to hang it on<br>ceiling. | 322 | 5 | each |
323 | 13.11 | od260423/2019_2020 : FIRE EXIT :- Supply & installing in position self glowing " FIRE EXIT " sign board of size 100mm x 300 mm made of luminescent safely, rigid sheet in green colour, photo luminescent rigid sheet with two each hanging chains & necessarry supports to hang it on ceiling. | 323 | 2 | each |
324 | 14 | MRAC WORKSHOP ELECTRICAL WORKS | 324 | ||
325 | 14.01 | 7.7.1 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV\ngrade of following size on wall surface as required.Upto 35 sq. mm (clamped with 1mm thick saddle) | 325 | 18 | metre |
326 | 14.02 | 1.20.3 : Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess\nincluding painting in case of surface conduit, or cutting the wall and making good the same in\ncase of recessed conduit as required.32 mm | 326 | 18 | metre |
327 | 14.03 | 7.1.1 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of\nfollowing size direct in ground including excavation, sand cushioning, protective covering and\nrefilling the trench etc as required.Upto 35 sq. mm | 327 | 45 | metre |
328 | 14.04 | 90.11.1.10 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required | 328 | 1 | each |
329 | 14.05 | 90.11.1.21 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required | 329 | 1 | each |
330 | 14.06 | 2.3.3 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator12 way, Double door | 330 | 1 | each |
331 | 14.07 | 2.13.2 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps | 331 | 1 | each |
332 | 14.08 | 2.13.1 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps | 332 | 1 | each |
333 | 14.09 | 2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole | 333 | 26 | each |
334 | 14.1 | 2.14.1 : Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual\ncurrent circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps | 334 | 1 | each |
335 | 14.11 | 2.10.4 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole | 335 | 4 | each |
336 | 14.12 | 2.15.2 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual \n current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps | 336 | 1 | each |
337 | 14.13 | 2.15.3 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual \n current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps | 337 | 1 | each |
338 | 14.14 | 2.18 : Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth,metal enclosed plug top along with 20 amps "C" curve, SP, MCB, in sheet steel enclosure, onsurface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. | 338 | 2 | each |
339 | 14.15 | 2.20 : Supplying and fixing 30 amps, 415 volts, TPN industrial type, socket outlet, with 4 pole and earth,metal enclosed plug top alongwith 30 amps "C" curve, TPMCB, in sheet steel enclosure, onsurface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. | 339 | 2 | each |
340 | 14.16 | 1.10.3 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC\ninsulated copper conductor single core cable in surface / recessed medium class PVC conduit,\nwith modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS\nPVC insulated copper conductor single core cable etc as required.Group C | 340 | 20 | point |
341 | 14.17 | 1.55.3 : Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C | 341 | 4 | point |
342 | 14.18 | 1.14.1 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire | 342 | 210 | metre |
343 | 14.19 | 1.14.2 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire | 343 | 95 | metre |
344 | 14.2 | 1.14.9 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required4 X 6 sq. mm + 2 X 6 sq. mm earth wire | 344 | 40 | metre |
345 | 14.21 | 1.24.1 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch | 345 | 15 | each |
346 | 14.22 | 1.24.3 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch | 346 | 6 | each |
347 | 14.23 | 1.24.4 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet | 347 | 15 | each |
348 | 14.24 | 1.24.5 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet | 348 | 6 | each |
349 | 14.25 | 1.24.8 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Bell push | 349 | 1 | each |
350 | 14.26 | od268273/2019_2020 : Supply & Fixing of 25/32 A DP MCB isolator | 350 | 1 | each |
351 | 14.27 | od268274/2019_2020 : Supplying and fixing 40A rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. <br>Triple pole | 351 | 1 | each |
352 | 14.28 | 1.38 : Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required. | 352 | 1 | each |
353 | 14.29 | 1.25 : Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. | 353 | 2 | each |
354 | 14.3 | 1.27.2 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm) | 354 | 15 | each |
355 | 14.31 | 1.27.4 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm) | 355 | 3 | each |
356 | 14.32 | 90.4.5.2 : Supply, conveyance, installation, testing and commissioning of ceiling fans of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required. | 356 | 2 | each |
357 | 14.33 | 90.4.1 : Supply and installation of suitable size MS rod type fan clamp in the RCC slab as per IS 732 as required. | 357 | 2 | each |
358 | 14.34 | 90.3.19.3 : Supply conveyance, installation, testing and commissioning the light fittings of following types made from CRCA sheet 0.5mm thickness with all accessories and lamps directly on wall and giving connections with 16/0.20 mm 3 core PVC insulated and sheathed round copper conductor flex wire or extending the original wiring and giving connections as required | 358 | 9 | each |
359 | 14.35 | od260500/2019_2020 : Supply, installation , testing and commissioning of Wall fan of 400mm sweep dia on wall, fixing necessary anchor bolts / bolt and nuts etc., as required including giving connections with the supplied wire along with the Wall fan.<br>400mm sweep wall fan working on 230 V A/C | 359 | 6 | each |
360 | 14.36 | 1.27.1 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm) | 360 | 3 | each |
361 | 14.37 | od260502/2019_2020 : Supply, installation , testing and commissioning of exhaust fans of size up to 450mm in the existing opening, fixing necessary anchor bolts / bolt and nuts etc., as required including giving connections with the supplied wire along with the exhaust fan.<br>300/305 mm sweep Light Duty Exhaust fan in metal frame working on 230 V A/C | 361 | 2 | each |
362 | 14.38 | 1.33 : Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden blockincluding connection etc as required. | 362 | 2 | each |
363 | 14.39 | 5.2 : Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providingmasonry enclosure with cover plate having locking arrangement and watering pipe etc. withcharcoal/ coke and salt as required | 363 | 2 | set |
364 | 14.4 | od260505/2019_2020 : Supply and laying of one number of 10 SWG Copper wire on wall/ surface/ recessed conduit etc. | 364 | 8 | metre |
365 | 14.41 | od260416/2019_2020 : Supplying and laying 10 SWG Cu wire at 0.50 metre below ground level for conductor earth<br>electrode, including connection/ termination with GI thimble etc. as required. | 365 | 18 | metre |
366 | 14.42 | od261895/2019_2020 : Supply of 10 sqmm 4 core PVC/XLPE insulated armoured cable with aluminium conductors for working voltages up to and including 1100 volts conforming IS 1584/part I/1988 for PVC IS 7098 part I for XLPE | 366 | 8 | metre |
367 | 14.43 | od260451/2019_2020 : Supply of 25 sqmm 4 core PVC/XLPE insulated armoured cable with aluminium conductors for working voltages up to and including 1100 volts conforming IS 1584/part I/1988 for PVC IS 7098 part I for XLPE | 367 | 50 | metre |
368 | 14.44 | 9.1.32 : Supplying and making end termination with brass compression gland and aluminium lugs for \nfollowing size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV \ngrade as required.4 X 10 sq. mm (25mm) | 368 | 2 | set |
369 | 14.45 | 9.1.34 : Supplying and making end termination with brass compression gland and aluminium lugs for \nfollowing size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV \ngrade as required.4 X 25 sq. mm (28mm) | 369 | 2 | set |
370 | 14.46 | od260528/2019_2020 : Supply, installation, testing and commissioning of 40W LED low bay light for indoor working on 230V 50Hz AC complete with all other accessories as required. | 370 | 6 | each |
371 | 14.47 | od268298/2019_2020 : SITC of 6KVA UPS with 12V 42Ah battery for 1 hour back-up complete with all<br>accessories as required. | 371 | 1 | each |
372 | 15 | MRAC WORKSHOP FIRE FIGHTING WORKS | 372 | ||
373 | 15.01 | od260381/2019_2020 : Supply, installing, testing and commissioning of Fire Extinguisher Carbondi oxide type ISI mark, 2 kg capacity with initial charger and installation brackets.Make:- ISI Approved. | 373 | 2 | each |
374 | 15.02 | od263388/2019_2020 : (Kayyur) Below Ground Piping :- Providing, fixing, welding joints and testing of 100 mm Dia. heavy class MS ERW Black pipes as per relevant IS 1239/3589 with special accessories tees, elbows, flanged joints, rubber insertion, nuts, bolts, washers or welded joint with flange joints on bends, including fixing the pipe with suitable flat iron strip clamps/brackets structural members dash fastener,civil breakage,making good the same etc. painting with a primer coat and two coats of postal red enamel etc. complete as required. (for wet riser system)<br> | 374 | 137 | per metre |
375 | 15.03 | od263389/2019_2020 : (Kayyur)4.1P: Supplying, installation, testing and commissioning of electric driven terrace pump suitable<br>for automatic operation and consisting of following, complete in all respects, as required:<br>(Terrace Pump)<br>Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze<br>impeller with stainless steel shaft, mechanical confirming to IS : 1520<br>Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3<br>phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted<br>type with Class-'F' insulation, conforming to IS-325.M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as<br>required.<br>Suitable cement concrete foundation duly plastered and with anti vibration pads. 900lpm @ 35 m head | 375 | 1 | each |
376 | 15.04 | od262941/2019_2020 : (Kayyur) 7.7: Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS<br>3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets<br>etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with<br>two or more coats of synthetic enamel paint of required shade complete as required :<br>100mm dia pipe | 376 | 12 | per metre |
377 | 15.05 | od263390/2019_2020 : (Kayyur(14.5) Providing, installation, testing and commissioning of non-return valve of following sizes<br>confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 100mm dia | 377 | 2 | each |
378 | 15.06 | od263391/2019_2020 : (Kayyur ) 19.1 : Supplying and fixing of fire brigade connection of cast iron body with gun metal male<br>instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe<br>connection conforming to IS 904 as required : 2 way-100 mm dia M.S. Pipe<br> | 378 | 1 | each |
379 | 15.07 | od263392/2019_2020 : (Kayyur) Providing & fixing 25mm Air release valve as per IS:14845 ISI Marked | 379 | 1 | each |
380 | 15.08 | od263393/2019_2020 : (Kayyur) 22 : Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. | 380 | 1 | each |
381 | 15.09 | od261901/2019_2020 : Supply, installing, testing and commissioning of Fire Extinguisher dry chemical<br>powder type ISI mark, 5 kg capacity with initial charger and<br>installation<br>brackets.Make - Safex / Warrior / Intime | 381 | 2 | each |
382 | 15.1 | 90.14.28.2 : S & F Motor starters of the following ratings | 382 | 1 | each |
383 | 15.11 | od260428/2019_2020 : Providing & fixing pressure gauges of not less than 100mm dia dial of pressure range 0-10 kg/cmsq complete with shut off valve duly calibrated before installation.Make:- ISI Approved.<br> | 383 | 1 | each |
384 | 15.12 | od260446/2019_2020 : 3 core cable,2.5sq mm,copper. Make:- ISI approved | 384 | 30 | metre |
385 | 16 | FRONT GATE AND SMALL GATE M AND E WORKS | 385 | ||
386 | 16.01 | 2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole | 386 | 12 | each |
387 | 16.02 | 2.15.2 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual \n current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps | 387 | 1 | each |
388 | 16.03 | 2.13.1 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps | 388 | 1 | each |
389 | 16.04 | 90.11.1.10 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required | 389 | 1 | each |
390 | 16.05 | 1.10.3 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC\ninsulated copper conductor single core cable in surface / recessed medium class PVC conduit,\nwith modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS\nPVC insulated copper conductor single core cable etc as required.Group C | 390 | 28 | point |
391 | 16.06 | 1.24.1 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch | 391 | 4 | each |
392 | 16.07 | 1.24.4 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet | 392 | 4 | each |
393 | 16.08 | 1.27.4 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm) | 393 | 2 | each |
394 | 16.09 | 1.55.3 : Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C | 394 | 6 | point |
395 | 16.1 | 1.14.1 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire | 395 | 100 | metre |
396 | 16.11 | 1.14.2 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire | 396 | 20 | metre |
397 | 16.12 | 1.21.2 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm | 397 | 12 | metre |
398 | 16.13 | 1.24.3 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch | 398 | 2 | each |
399 | 16.14 | 1.24.5 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet | 399 | 2 | each |
400 | 16.15 | 1.27.2 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm) | 400 | 2 | each |
401 | 16.16 | 7.5.1 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of\nfollowing size in the existing RCC/ HUME/ METAL pipe as required.Upto 35 sq. mm | 401 | 9 | metre |
402 | 16.17 | 7.6.1 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of\nfollowing size in the existing masonry open duct as required.Upto 35 sq. mm | 402 | 35 | metre |
403 | 16.18 | 7.1.1 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of\nfollowing size direct in ground including excavation, sand cushioning, protective covering and\nrefilling the trench etc as required.Upto 35 sq. mm | 403 | 70 | metre |
404 | 16.19 | 14.14.2 : Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with\nRCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required.150 mm dia | 404 | 9 | metre |
405 | 16.2 | 7.7.1 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV\ngrade of following size on wall surface as required.Upto 35 sq. mm (clamped with 1mm thick saddle) | 405 | 25 | metre |
406 | 16.21 | od260472/2019_2020 : Supply, installation , testing and commissioning of Wall fan of 300mm sweep dia on wall, fixing necessary anchor bolts / bolt and nuts etc., as required including giving connections with the supplied wire along with the Wall fan.<br>300mm sweep wall fan working on 230 V A/C | 406 | 2 | each |
407 | 16.22 | od260481/2019_2020 : Supply and laying of one number of 10 SWG Copper wire in the existing trench along with power cables. | 407 | 30 | metre |
408 | 16.23 | od260484/2019_2020 : Supply of 1.5 sqmm 3 core PVC / XLPE insulated armoured control cables with copper conductors for working voltages up to and including 1100 V conforming to IS 1554 part I 1988 for PVC and IS 7098 Part If for XLPE | 408 | 20 | metre |
409 | 16.24 | od261895/2019_2020 : Supply of 10 sqmm 4 core PVC/XLPE insulated armoured cable with aluminium conductors for working voltages up to and including 1100 volts conforming IS 1584/part I/1988 for PVC IS 7098 part I for XLPE | 409 | 80 | metre |
410 | 16.25 | od261901/2019_2020 : Supply, installing, testing and commissioning of Fire Extinguisher dry chemical<br>powder type ISI mark, 5 kg capacity with initial charger and<br>installation<br>brackets.Make - Safex / Warrior / Intime | 410 | 2 | each |
411 | 16.26 | 9.1.32 : Supplying and making end termination with brass compression gland and aluminium lugs for \nfollowing size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV \ngrade as required.4 X 10 sq. mm (25mm) | 411 | 2 | set |
412 | 16.27 | od261924/2019_2020 : Supply & Installation of Draw Boxes with termination | 412 | 7 | each |
413 | 16.28 | od261925/2019_2020 : SITC of 3W LED Recessed Spot light pre wired, working on 230V, 50Hz AC, complete with all other accessories as required. | 413 | 4 | no |
414 | 16.29 | od261926/2019_2020 : SITC of 20/25W LED Surface mounting down light, working on 230V, 50Hz AC, complete with all other accessories as required. | 414 | 2 | no |
415 | 16.3 | od261927/2019_2020 : SITC of weather proof pillar light fittings with 9W LED lamp, IP65 for outdoor purpose pre wired and complete with all other accessories as required. | 415 | 12 | no |
416 | 16.31 | od261928/2019_2020 : Supply, installation, testing and commissioning of LED 3W Spike light, IP65 with all other accessories as required. | 416 | 4 | no |
417 | 16.32 | 90.6.5.19 : Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes. | 417 | 28 | metre |
418 | 16.33 | 90.16.1.3 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required | 418 | 13 | metre |
419 | 16.34 | od260498/2019_2020 : Supply, installation, testing and commissioning of 5W LED wall light working on 230V, 50 Hz AC, including giving connections as required. | 419 | 2 | each |
420 | 16.35 | od261960/2019_2020 : Supply of 4 sqmm 4 core PVC/XLPE insulated armoured cable with aluminium conductors for working voltages up to and including 1100 volts conforming IS 1584/part I/1988 for PVC IS 7098 part I for XLPE | 420 | 35 | metre |
421 | 17 | EXTERNAL LIGHTING | 421 | ||
422 | 17.01 | 7.5.1 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of\nfollowing size in the existing RCC/ HUME/ METAL pipe as required.Upto 35 sq. mm | 422 | 16 | metre |
423 | 17.02 | 7.1.1 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of\nfollowing size direct in ground including excavation, sand cushioning, protective covering and\nrefilling the trench etc as required.Upto 35 sq. mm | 423 | 250 | metre |
424 | 17.03 | 7.7.1 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV\ngrade of following size on wall surface as required.Upto 35 sq. mm (clamped with 1mm thick saddle) | 424 | 80 | metre |
425 | 17.04 | 14.14.2 : Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with\nRCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required.150 mm dia | 425 | 16 | metre |
426 | 17.05 | od260416/2019_2020 : Supplying and laying 10 SWG Cu wire at 0.50 metre below ground level for conductor earth<br>electrode, including connection/ termination with GI thimble etc. as required. | 426 | 25 | metre |
427 | 17.06 | od260449/2019_2020 : Supply of 4 sqmm 3 core PVC/ XLPE insulated armoured cable with aluminium conductors for working voltages up to and including 1100 volts conforming IS 1584/part I/1988 for PVC IS 7098 part I for XLPE | 427 | 240 | metre |
428 | 17.07 | od261821/2019_2020 : Supply of 16 sqmm 3 core PVC/ XLPE insulated armoured cable with aluminium conductors for working voltages up to and including 1100 volts conforming IS 1584/part I/1988 for PVC IS 7098 part I for XLPE | 428 | 90 | metre |
429 | 17.08 | 9.1.8 : Supplying and making end termination with brass compression gland and aluminium lugs for \nfollowing size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV \ngrade as required.3 X 16 sq. mm (25mm) | 429 | 2 | set |
430 | 17.09 | 5.2 : Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providingmasonry enclosure with cover plate having locking arrangement and watering pipe etc. withcharcoal/ coke and salt as required | 430 | 2 | set |
431 | 17.1 | od260457/2019_2020 : SITC of 5 metre Hot dipped galvanised Octogonal pole in single section with 70mm top diameter, 130mm bottom diameter, 3mm sheet thickness, base plate dimensions of 200 x 200x 12 mm with 1.0 M long single arm bracket with 36W LED street light complete with all other accessories as required. | 431 | 4 | each |
432 | 17.11 | od260460/2019_2020 : SITC of 6 metre Hot dipped galvanised Octogonal pole in single section with 70mm top diameter, 130mm bottom diameter, 3mm sheet thickness, base plate dimensions of 200 x 200x 12 mm with 1.0 M long single arm bracket with 45W LED street light complete with all other accessories as required. | 432 | 6 | each |
433 | 17.12 | od260463/2019_2020 : SITC Of feeder pillar complete with the following accessories. Incomer: 40A, DP<br>Isolator. 40A, DP, RCCB, 100mA. Timer control with contactor. Auto/ Manual<br>switch. Outgoing: 10A, SP MCB - 4 Nos. | 433 | 1 | each |
434 | 17.13 | 1.17.3 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm | 434 | 70 | metre |
435 | 17.14 | 1.21.2 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm | 435 | 80 | metre |
436 | 18 | EXTERNAL FIRE PROTECTION SYSTEM | 436 | ||
437 | 18.01 | od260392/2019_2020 : Providing 63mm (2½ )" dia 15 m long canvas hose pipe complete with stainless steel male & female coupling stainless steel wire wound with the pipe The pipe shall confirm to IS. 4927. Make: ISI Approved. | 437 | 6 | each |
438 | 18.02 | od264260/2019_2020 : Kayyur 11.6 : Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with<br>bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets<br>conforming to IS 13095 of following sizes as required : 150mm dia | 438 | 2 | each |
439 | 18.03 | od264261/2019_2020 : (Kayyur) 7.6: Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS<br>3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets<br>etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with<br>two or more coats of synthetic enamel paint of required shade complete as required : 80mm dia | 439 | 12 | per metre |
440 | 18.04 | od264262/2019_2020 : (Kayyur) 14.4 : Providing, installation, testing and commissioning of non-return valve of following sizes<br>confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 80mm dia | 440 | 1 | each |
441 | 18.05 | od264263/2019_2020 : (Kayyur) 7.8: Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS<br>3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets<br>etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with<br>two or more coats of synthetic enamel paint of required shade complete as required : 150mm dia | 441 | 12 | metre |
442 | 18.06 | od264264/2019_2020 : (Kayyur) 7.1: Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS<br>3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets<br>etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with<br>two or more coats of synthetic enamel paint of required shade complete as required: 25mm dia | 442 | 6 | metre |
443 | 18.07 | od264265/2019_2020 : (Kayyur) 2.9: Supplying, installation, testing and commissioning of diesel engine driven main fire pump<br>suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump) Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS<br>standard complete with auto starting mechanism, 12 /24 volts electric starting equipment,<br>diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm<br>thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer,<br>instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.<br>M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. 1620 lpm at 56 m Head | 443 | 1 | each |
444 | 18.08 | od264266/2019_2020 : (Kayyur) 1.9: Supplying, installation, testing and commissioning of<br>Electric driven Main Fire Pump suitable for automatic<br>operation and consisting of following, complete in all<br>respects, as required :<br>(a) Horizontal type, multistage, centrifugal, split casing<br>pump of cast iron body & bronze impeller with stainless<br>steel shaft, mechanical seal conforming to IS 1520.<br>(b) Suitable HP Squirrel cage induction motor, TEFC,<br>synchronous speed 1500 RPM, suitable for operation<br>on 415 volts, 3 phase 50 Hz, AC supply with IP 55<br>protection for enclosure, horizontal foot mounted type<br>with Class-'F' insulation, conforming to IS-325.<br>(c) M.S. fabricated Common base plate, coupling, coupling<br>guard, foundation bolts etc. as required.<br>(d) Suitable cement concrete foundation duly plastered <br>1620 lpm at 56 m Head | 444 | 1 | each |
445 | 18.09 | od269363/2019_2020 : Fire Pump Panel: SITC of Fire Pump Panel : Supply, installation , testing and commissioning of totally enclosed compartmentalized dust and vermin proof cubical segregated and modular in construction M.V. panel board free standing fabricated with14swg and 16swg of CRCA M.S. sheet, powder coated , bus-bar chamber ,outgoing<br>switchgear etc. (all feeder unit Would be compartmentalized), color coded PVC sleeved vertical / horizontal Aluminium busbar of required size of length, (bus-bar distances shall be minimum 32 mm ) insulators, hardware, neoprene gasket , hinged door, interconnecting single core multi strand lugged copper wire having current density of 2A / sqmm of suitable capacity & size with lugs from busbar to<br>switchgears / MCCB / MCB or where ever required, control wiring with 1 sqmm FRLS cable, ON/OFF, RYB phase indicators, two earthing terminal busbar of size 25 x 5 mm copper with nut & bolts at outside of the panel, rating and name plates for all incoming & outgoings etc. comprising with the followings as per the KEI standard. Switch gears – ABB/ Equivalent, Contactors – ABB, L&T/Equivalent.<br>Incomer: 160A TPN Isolator - 1 no, Outgoing: 100A<br>TPN Isolator - 1 no. & 25 3P MCB-1 No. | 445 | 1 | each |
446 | 18.1 | od263388/2019_2020 : (Kayyur) Below Ground Piping :- Providing, fixing, welding joints and testing of 100 mm Dia. heavy class MS ERW Black pipes as per relevant IS 1239/3589 with special accessories tees, elbows, flanged joints, rubber insertion, nuts, bolts, washers or welded joint with flange joints on bends, including fixing the pipe with suitable flat iron strip clamps/brackets structural members dash fastener,civil breakage,making good the same etc. painting with a primer coat and two coats of postal red enamel etc. complete as required. (for wet riser system)<br> | 446 | 155 | per metre |
447 | 18.11 | od264439/2019_2020 : Kayyur 3.1: Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump)<br>Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with<br>stainless steel shaft, mechanical seal conforming to IS : 1520.<br>Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3<br>phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot<br>mounted type with Class-'F' insulation, conforming to IS : 325.<br>M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. <br>180 lpm at 88 m Head | 447 | 1 | each |
448 | 18.12 | od264461/2019_2020 : Kayyur 19.2: Supplying and fixing of fire brigade connection of cast iron body with gun metal male<br>instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe<br>connection conforming to IS 904 as required : 4 way - 150 mm dia M.S. Pipe | 448 | 1 | each |
449 | 18.13 | od262941/2019_2020 : (Kayyur) 7.7: Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS<br>3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets<br>etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with<br>two or more coats of synthetic enamel paint of required shade complete as required :<br>100mm dia pipe | 449 | 18 | per metre |
450 | 18.14 | od263390/2019_2020 : (Kayyur(14.5) Providing, installation, testing and commissioning of non-return valve of following sizes<br>confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 100mm dia | 450 | 2 | each |
451 | 18.15 | od263392/2019_2020 : (Kayyur) Providing & fixing 25mm Air release valve as per IS:14845 ISI Marked | 451 | 1 | each |
452 | 18.16 | od263393/2019_2020 : (Kayyur) 22 : Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. | 452 | 3 | each |
453 | 18.17 | od262942/2019_2020 : (Kayyur) 11.5 : Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with<br>bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets<br>conforming to IS 13095 of following sizes as required :100mm dia | 453 | 5 | each |
454 | 18.18 | od264618/2019_2020 : Kayyur 11.4: Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with<br>bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets<br>conforming to IS 13095 of following sizes as required<br>80mm | 454 | 2 | each |
455 | 18.19 | od264485/2019_2020 : Kayyur 10.2: Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required:<br>Single headed Stainless steel | 455 | 6 | each |
456 | 18.2 | od260434/2019_2020 : Below Ground Piping :- Providing, fixing, welding joints and testing of 150 mm Dia. heavy class MS ERW Black pipes as per relevant IS 1239/3589 with special accessories tees, elbows, flanged joints, rubber insertion, nuts, bolts, washers or welded joint with flange joints on bends, including fixing the pipe with suitable flat iron strip clamps/brackets structural members dash fastener,civil breakage,making good the same etc. painting with a primer coat and two coats of postal red enamel etc. complete as required. (for wet riser system) | 456 | 286 | metre |
457 | 18.21 | od260445/2019_2020 : Below Ground Piping :- Providing, fixing, welding joints and testing of 80 mm Dia. heavy class MS ERW black pipes as per relevant IS 1239/3589 with special accessories tees, elbows, flanged joints, rubber insertion, nuts, bolts, washers or welded joint with flange joints on bends, including fixing the pipe with suitable flat iron strip clamps/brackets structural members dash fastener,civil breakage,making good the same etc. painting with a primer coat and two coats of postal red enamel etc. complete as required. (for wet riser system) | 457 | 8 | metre |
458 | 18.22 | od260428/2019_2020 : Providing & fixing pressure gauges of not less than 100mm dia dial of pressure range 0-10 kg/cmsq complete with shut off valve duly calibrated before installation.Make:- ISI Approved.<br> | 458 | 3 | each |
459 | 18.23 | od260400/2019_2020 : M.S Hose Cabinet : - Providing & fixing M.S Hose cabinet door with powdercoating of postal red color (of size minimum 1200mm wide, 2100mm height) madeof M.S sheet 14 G with glass front door and locking arrangement to accommodate2-hoses, one branch pipe and to accommodate F.A. hose reel in addition forinternal hydrant complete as per direction of Engineer incharge | 459 | 6 | each |
460 | 18.24 | od260406/2019_2020 : Providing and fixing 63 mm dia standard stainless steel short Branch Pipe female instantaneous inlet, male threaded outlet, complete with hexagonal base nozzle as per IS 903 with 20 mm nozzle complete with fixing clamps. Make: Essel/Priyanka/Newage | 460 | 6 | each |
461 | 18.25 | od260485/2019_2020 : Providing and fixing Testing arrangement in the pump house comprising one no. 50mm dia. GM ball valve and 10RM of 50mm dia MS pipe (C Class) confirming to IS 1239.<br>Make :- ISI Approved. | 461 | 1 | each |
462 | 19 | EXISTING SMART CLASSROOM ELV & ELECTRICAL WORKS | 462 | ||
463 | 19.01 | 1.27.1 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm) | 463 | 13 | each |
464 | 19.02 | 1.53.1 : Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable | 464 | 320 | metre |
465 | 19.03 | od261267/2019_2020 : Supply, installation, testing and commissioning of Bio Metric Finger Print scan attendance system with LCD/LED display & keypad & TCPIP LAN, USB Connectivity along with Attendance monitoring & report software (Web based Terminal)<br> | 465 | 13 | each |
466 | 19.04 | od261268/2019_2020 : Supply, Installation, Testing and commissioning of 6W Wall mount speakers with perforated metal grille with line matching transformer suitable for 4 ohm impedance 200 mm dia LBD 0606/10 | 466 | 13 | each |
467 | 19.05 | od261214/2019_2020 : Supply & laying of twin twisted 2x1.5 sqmm Cu flexible wire 1.1 kv grade PVC insulated through PVC conduit. | 467 | 120 | metre |
468 | 19.06 | od261215/2019_2020 : Supply, installation, testing and commissioning of indoor IR IP dome camera 2 MP 2.1mm/4mm/6mm focal length lens capable to 1.0 lux sensitivity, with IR n 480 TV lines. | 468 | 26 | each |
469 | 19.07 | od261270/2019_2020 : Supply, installation, testing, and commissioning of LT Projector and roof mount for LT projector complete with all accessories as required. | 469 | 13 | set |
470 | 19.08 | od261271/2019_2020 : Supply, installation, testing and commissioning of Promethean Board AB2T78 complete with all other accessories. Active inspire software will be complimentary with Promethean board. | 470 | 13 | no |
471 | 19.09 | od261484/2019_2020 : Supply, installation, testing and commissioning of LAN socket. | 471 | 13 | each |
472 | 19.1 | 2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole | 472 | 24 | each |
473 | 19.11 | 2.13.1 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps | 473 | 1 | each |
474 | 19.12 | 2.15.2 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual \n current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps | 474 | 1 | each |
475 | 19.13 | 1.14.1 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire | 475 | 320 | metre |
476 | 19.14 | 1.14.2 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire | 476 | 250 | metre |
477 | 19.15 | 1.24.1 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch | 477 | 26 | each |
478 | 19.16 | 1.24.3 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch | 478 | 13 | each |
479 | 19.17 | 1.24.4 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet | 479 | 26 | each |
480 | 19.18 | 1.24.5 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet | 480 | 13 | each |
481 | 19.19 | 1.27.2 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm) | 481 | 13 | each |
482 | 19.2 | 1.27.4 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm) | 482 | 13 | each |
483 | 19.21 | 90.11.1.12 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required | 483 | 1 | each |
484 | 19.22 | 9.1.33 : Supplying and making end termination with brass compression gland and aluminium lugs for \nfollowing size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV \ngrade as required.4 X 16 sq. mm (28mm) | 484 | 2 | set |
485 | 19.23 | od260448/2019_2020 : Supply of 16 sqmm 4 core PVC/XLPE insulated armoured cable with aluminium conductors for working voltages up to and including 1100 volts conforming IS 1584/part I/1988 for PVC IS 7098 part I for XLPE | 485 | 30 | metre |
486 | 20 | THE ELV SYSTEM | 486 | ||
487 | 20.01 | od261417/2019_2020 : Supply, Installation, Testing and commissioning Of distribution box for CCTV 6Ux600Wx600D With Front Glass Door,Side Openable Panels with Lock & Key,4Way 5A PDU,1U Cable Manager,Cooling Fan,H/W Kit10 | 487 | 5 | no |
488 | 20.02 | od261212/2019_2020 : SITC Of 350W RMS MIXER AMPLIFIER, 3 MIC, 2 AUX, 100V/70V AND 4OHMS , BALANCED MIC,FREQUENCY RESPONSE (50 HZ-16000HZ),S/N RATIO-MIC1,2,3,4:66DB;AUX 1:80 DB,THD-LESS THAN 1% AT 1 KHZ,1/3 RATED POWER, MUTING FUNCTION-MIC 1 OVERRIDES OTHER INPUT SIGNALS WITH 0-30 DB ATTENUATION,CONTROLS-INDIVIDUAL GAIN CONTROLS, POWER SWITCH;BASS: 10DB AT 100HZ,TREBLE: 10DB AT10000HZ. | 488 | 1 | each |
489 | 20.03 | od262010/2019_2020 : Supply, Installation, Testing and commissioning of Distribution box for PA distribution made out of 16 SWG CRCA sheet with lockable door arrangement having connectors (10 NOS) suitable for 1.5sqmm wire with facity for cable termination of 4cx10 sqmm ALAR. Required at each floor for PA wire termination. | 489 | 1 | each |
490 | 20.04 | od262045/2019_2020 : Supply Installation testing and Commissioning of 10/100/1000 Mbps 24 Port Network Switch to provide networks and internet on class room etc | 490 | 1 | each |
491 | 20.05 | od261267/2019_2020 : Supply, installation, testing and commissioning of Bio Metric Finger Print scan attendance system with LCD/LED display & keypad & TCPIP LAN, USB Connectivity along with Attendance monitoring & report software (Web based Terminal)<br> | 491 | 1 | each |
492 | 20.06 | od261705/2019_2020 : Supply and laying of Cat6 outdoor cable including necessary connectors<br> | 492 | 990 | metre |
493 | 20.07 | od261268/2019_2020 : Supply, Installation, Testing and commissioning of 6W Wall mount speakers with perforated metal grille with line matching transformer suitable for 4 ohm impedance 200 mm dia LBD 0606/10 | 493 | 3 | each |
494 | 20.08 | od262046/2019_2020 : Supply, installation, testing and commissioning of 24 Port 10/100/1000 Mbps PoE Switch. | 494 | 1 | each |
495 | 20.09 | od261213/2019_2020 : Supply, Installation, Testing and commissioning of XLR cables and connectors | 495 | 6 | each |
496 | 20.1 | od261214/2019_2020 : Supply & laying of twin twisted 2x1.5 sqmm Cu flexible wire 1.1 kv grade PVC insulated through PVC conduit. | 496 | 180 | metre |
497 | 20.11 | od261215/2019_2020 : Supply, installation, testing and commissioning of indoor IR IP dome camera 2 MP 2.1mm/4mm/6mm focal length lens capable to 1.0 lux sensitivity, with IR n 480 TV lines. | 497 | 4 | each |
498 | 20.12 | od261216/2019_2020 : Supply, installation, testing and commissioning of Outdoor IR IP bullet camera 2 MP 2.1mm/4mm/6mm focal length lens capable to 1.0 lux sensitivity,with IR 480TV lines. | 498 | 9 | each |
499 | 20.13 | od262047/2019_2020 : Network Video Recorder:<br>Providing & fixing Network Video Recorde 32-channel 720P or 24-channel 1080P high definition network video input and storage Support simultaneous HDMI and VGA output, resolution up to 1920×1080P/60Hz Supports 256Mbps bandwidth throughput handling, Supports 4-channe, 1080P video real-time decoding and synchronous playback Supports 8 SATA hard disk with capacity up to 4TB. | 499 | 1 | each |
500 | 20.14 | od262048/2019_2020 : Supply, installation, testing and commissioning of 32" Flat Screen VGA Color Monitor.<br> | 500 | 1 | each |
501 | 20.15 | od262049/2019_2020 : Supply, Installation, testing and commissioning of Cat6 24 Port un loaded Patch Panel. | 501 | 1 | each |
502 | 20.16 | od262071/2019_2020 : Supply, installation, testing and commissioning of Cat6 I/O for Patch Panel Shuttered. | 502 | 24 | each |
503 | 20.17 | 1.21.2 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm | 503 | 150 | metre |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail