| 1 | 1 | Demolition of cement concrete (unreinforced) in ground floor & paving not exceeding 15 cm thick below or above ground level.complete all as specified. | | 5 | Cum |
|---|
| 2 | 2 | Material and labour for 75mm thick PCC (1:3:6) type C1 using 20mm graded stone aggregate for plinth protection fair finished by Engr-in-Charge as directed. | | 50 | Sqm |
|---|
| 3 | 3 | 75mm thick concrete slab for Forming 12mm thick expansion joint filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound Grade 'A'.complete all as specified. | | 0.5 | 10 Running Metre |
|---|
| 4 | 4 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store & rubbish of the premises.complete all as specified. | | 50 | Sqm |
|---|
| 5 | 5 | Material and labour for 10mm thick cement mortar backing coat for wall tiling in CM (1:3).complete all as specified. | | 20 | Sqm |
|---|
| 6 | 6 | Material and labour for 20mm thick cement mortar (1:6) in floor complete all as specified. | | 30 | Sqm |
|---|
| 7 | 7 | Material and labour for vitrified ceramic tiles 10mm thick light shade (sqaure/rectangular) polished ,area of each tile exceeding 0.36 Sqm but not exceeding 0.42 Sqm, in floor jointed in neat cement slurry and pointed with coloured cement to match.complete all as specified. | | 15 | Sqm |
|---|
| 8 | 8 | Material and labour for non skid coloured tiles area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floor jointed in neat cement slurry and pointed with coloured cement to match.complete all as specified. | | 10 | Sqm |
|---|
| 9 | 9 | M & L for machine cut kota stone slab flooring 20-25mm thick over screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified. | | 5 | Sqm |
|---|
| 10 | 10 | Material and labour for Glazed ceramic tiles exc 0.08 sqm and n.exc 0.16 Sqm as in dados set and jointed in neat cement slurry and pointed with white and coloured cement to match complete all as specified. | | 20 | Sqm |
|---|
| 11 | 11 | Supply and fix in repairs bib taps cast copper alloy with chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm bore complete all as specified. | | 15 | Each |
|---|
| 12 | 12 | S& F in repair long body bib tap with chromimum plated all as specified and directed by EIC. | | 20 | Each |
|---|
| 13 | 13 | Supply and fix in repairs 10 Ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet valve floot and handle, bracket fixed in repair complete all as specified. | | 20 | Each |
|---|
| 14 | 14 | Taking up or down steel tubing 15mm dia and connections, including cleaning for refixing or removal to store complete all as specified. | | 40 | Rm |
|---|
| 15 | 15 | Supply and fix 15mm dia steel tubing galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors. | | 35 | Rm |
|---|
| 16 | 16 | Refixing 15mm dia old steel tubing and connections in new or old position (Walls, ceiling, floors, etc). complete all as specified. | | 5 | Rm |
|---|
| 17 | 17 | Taking down 20mm bore steel tubing and connections, including cleaning for re-fixing or removal to store from site.complete all as specified. | | 20 | Rm |
|---|
| 18 | 18 | Supply and fix Galvanised steel tubing 20mm dia and connection in new or old position (Walls, ceiling, floors, etc).complete all as specified. | | 15 | Rm |
|---|
| 19 | 19 | Refixing steel tubing 20mm dia and connection in new or old position (Walls, ceiling, floors, etc).complete all as specified. | | 5 | Rm |
|---|
| 20 | 20 | S&F for Flush pipe of polyethylene of low or high density or PVC 32mm dia for low level cistern all as specified and directed by EIC. | | 15 | Each |
|---|
| 21 | 21 | S&F in repairs Angle cock chromimum plated all as specified and directed by EIC. | | 20 | Each |
|---|
| 22 | 22 | S&F in repirs Waste coupling chromimum plated for sink all as specified and directed by EIC.\n | | 15 | Each |
|---|
| 23 | 23 | Supply and fix in repairs stop valves cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butter fly handle and fixed, 15mm bore all as specified and as directed. | | 20 | Each |
|---|
| 24 | 24 | Supply and fix in repairs for sheet glass self assembly consisting of 5.5mm thick sheet glass self 12 cm wide with chromium plated bracket guard and railing 60 cm long all as specified and as directed. | | 5 | Each |
|---|
| 25 | 25 | Supply and fix in repairs brass CP Towel Rail 20 mm dia, D type, 60 cm long between flanges etc.complete all as specified. | | 10 | Each |
|---|
| 26 | 26 | S/F in repairs vitreous china squatting pan “ Orissa pattern” size 580mm x440 mm with ‘P’ or ‘S’ trap , including connecting to trap and flusing pipe and PCC (1:5:10 ) type E-2 concrete filling complete all as speciified and as specified. | | 10 | Each |
|---|
| 27 | 27 | Supply and fix in repair vitreous china wash down water closet pan pedestal pattern white complete (excluding flushing cistern and flush pipe) all as specified and directed by EIC. . | | 10 | Each |
|---|
| 28 | 28 | Supply and fix in repair vitreous china wash basin, white, flat back, size 550 x 400mm all specified fixing on existing brackets excluding pillar taps , plug lead chain and brush complete. | | 10 | Each |
|---|
| 29 | 29 | Supply and fix in repair pillar tap cast copper alloy 15mm bore with capstan head, chromium plated, screwed down high pressure, with or with out lettered \"Hot\" or \"Cold\" with long screw shank and fly nuts, screwed for iron pipes.complete all as specified. | | 15 | Each |
|---|
| 30 | 30 | Supply and fix in repair PVC connections 45 cm long fitted with brass nuts with washer on both ends fixed 15mm bore pipe.complete all as specified. | | 30 | Each |
|---|
| 31 | 31 | Supply and fix in repair for 600 x 450mm bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board of commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and as directed. | | 10 | Each |
|---|
| 32 | 32 | Supply and fix in repair plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated. complete all as specified. | | 10 | Each |
|---|
| 33 | 33 | Supply and fix in repair PTMT Grating size 150mm min weight 100 gm.complete all as specified. | | 10 | Each |
|---|
| 34 | 34 | Supply and fix in repair for brass chromium plated shower rose 125mm size fixed in repairs.complete all as specified. | | 10 | Each |
|---|
| 35 | 35 | Supply and fix in repair PTMT grating size 100mm min weight 25 gm. complete all as specified. | | 10 | Each |
|---|
| 36 | 36 | Taking down existing aluminium shutter of area exceeding 1.0 Sqm but not exceeding 2.00 Sqm and refixing the same in the same opening all as specified and as directed. | | 5 | Each |
|---|
| 37 | 37 | Supply and fix in repair floor door spring (Double spring) hydraulic regulated made upto minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other part made of mild steel heavy duty all as specified and as directed. | | 5 | Each |
|---|
| 38 | 38 | Taking down shutters exceeding 1sqm and n.exc 2 sqm all as specified and directed by EIC. | | 20 | Each |
|---|
| 39 | 39 | Material and labour for 35mm thick second class hard wood glassed/ skeleton shutter open rebated and prepared to receive glass, gauge etc divided into square with plain chamfered rounded mitred and rebated, with out sash bar for door .complete all as specified. | | 8 | Sqm |
|---|
| 40 | 40 | S & F in Stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperature 1.40mm & fixed with stainless steel wire staples all as specified and directed by EIC. | | 4 | Sqm |
|---|
| 41 | 41 | S&F in repair Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, 200 mm long tower bolt ,anodised aluminum snap beading screws complete all as specified and directed by EIC. | | 8 | Square Metre |
|---|
| 42 | 42 | M&L for 12 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to aluminium frame work all as specified and directed by EIC. | | 5 | Sqm |
|---|
| 43 | 43 | S&F for Sheet glass, 5.5 mm thick and glazing complete with beads fixed with brass screws exc.0.5 sqm in each pane.complete all as specified. | | 5 | Sqm |
|---|
| 44 | 44 | S& F of Mortice lock of 75 mm made of aluminium ( 4 lever) complete all as specified. | | 20 | Each |
|---|
| 45 | 45 | Material and labour for 35mm thick second class hard wood, plain framed paneled shutter (any number of panel) with panel of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers on both faces. complete all as specified. | | 5 | Square Metre |
|---|
| 46 | 46 | Supply and fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the styles and rails with suitable PVC sheet beading, and jointed together with solvent cement in the frame at site as per specification complete all as specified. | | 10 | Sqm |
|---|
| 47 | 47 | S&F for 100mm size Butt Hinges, medium weight, cold rolled mild steel. | | 80 | Each |
|---|
| 48 | 48 | S&F for 200mm long Aluminium anodised barrel tower bolts of extruded Section. | | 50 | Each |
|---|
| 49 | 49 | S&F for 150mm size Aluminium handles, cast type, anodised. | | 30 | Each |
|---|
| 50 | 50 | S&F in for 100mm size Aluminium handles, cast type, anodised. | | 39 | Each |
|---|
| 51 | 51 | S&F in for 300mm length Aluminium alloy, anodised, sliding door bolt with hasp, staples(bolt type) and fixing clips of sheet, cast or extruded sections. | | 15 | Each |
|---|
| 52 | 52 | Material and labour for two coat of synthetic enamel paint over one coat of pink primer on new wooden surfaces over 10 cm width or girth including preparation of surfaces. | | 20 | Sqm |
|---|
| 53 | 54 | S&F in repairs for 100mm size Aluminium handles, cast type, anodised. | | 15 | Each |
|---|
| 54 | 56 | S&F in repairs for 100mm long Aluminium anodised barrel tower bolts of extruded Section. | | 15 | Each |
|---|
| 55 | 58 | Dismantling water tanks and removing to store of capacity exceeding 250 & not exceeding 500 Ltrs. complete all as specified. | | 8 | Each |
|---|
| 56 | 59 | Rotational moulded polyethylene water storage tanks 500 Litres capacity (cylindrical vertical with close top) hoisted and fixed in position with PP-R ball valve (brass insert) as per requirement or the site all as specified in SSR Part 1. | | 8 | Each |
|---|
| 57 | 60 | Dismantling water tanks and removing to store of capacity exceeding 1000 & not exceeding 2000 Ltrs.complete all as specified. | | 2 | Each |
|---|
| 58 | 61 | Rotational moulded polyethylene water storage tanks 2000Litres capacity (cylindrical vertical with close top) hoisted and fixed in position with PP-R ball valve (brass insert) as per requirement or the site all as specified in SSR Part 1. | | 2 | Each |
|---|
| 59 | 62 | S&F in repair 20 mm dia Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.complete all as specified. | | 10 | Each |
|---|
| 60 | 63 | Supply and fix in repair 19 / 20 mm dia Aluminium anodised pipe for curtain rod.complete all as specified. | | 50 | Rm |
|---|
| 61 | 64 | Supply and fix in repair brackets for above item.complete all as specified. | | 30 | pair |
|---|
| 62 | 65 | Supply and fix in repair aluminimum (Die cost body)door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed.complete all as specified. | | 8 | Each |
|---|
| 63 | 66 | S&F in repair 150mm overall length of cover plate Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified and directed by EIC. | | 100 | Each |
|---|
| 64 | 67 | M&L for Securing glass of any description in existing Metal frames glazed with putty/ beads including removing loose or decayed putty/ beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work (New length of frame reputtied shall be measured) | | 500 | Rm |
|---|
| 65 | 68 | Hacking out old broken glass (any thickness size , quality, description)from wooden frame or stone concrete or bricks surrounding glazed with putty or fixed with beads n.exc 1.5 Sqm in each pane.complete all as specified. | | 50 | Sqm |
|---|
| 66 | 69 | S/F 4mm thick sheet glass ordinary quality and glazing with wooden beads or oil putty in square n. exe. 0.5 sqm in each pane.complete all as specified. | | 50 | Sqm |
|---|
| 67 | 70 | S&F 4mm thick Figured glass pin headed type and glazing with oil putty in square n.exc 0.5 Sqm in each pane.complete all as specified. | | 5 | Sqm |
|---|
| 68 | 71 | S & F in repair stainless steel wire cloth 0.36mm nominal dia of wire & average width of aperature 1.40mm & fixed with stainless steel wire staples.complete all as specified. | | 30 | Sqm |
|---|
| 69 | 72 | S&F in repair Two way angle cock chromimum plated all as specified and directed by EIC. | | 10 | Each |
|---|
| 70 | 73 | S&F in repair health faucet all as specified and directed by EIC. | | 15 | Each |
|---|
| 71 | 74 | Supply and fix in repair Urinal, bowl type or half stall pattern basin size of 465 x 355 x 265 mm white (min) only including connections to flushing pipe and out going pipes fixed in repairs all as specified . | | 5 | Each |
|---|
| 72 | 75 | Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed by EIC. | | 0.5 | Quintal |
|---|
| 73 | 76 | S&F for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded all as specified and directed by EIC. | | 4 | Sqm |
|---|
| 74 | 77 | S&F for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with out glazing bars, dovetailed or welded all as specified and directed by EIC. | | 2.5 | Sqm |
|---|
| 75 | 78 | welding in repaires exc 2.5cm but n.exc 5 cm in length of steel gate, doors , windows, etc all as specified. | | 25 | Each |
|---|
| 76 | 80 | S&F in repair waste pipe for WHB / Sink all as specified and directed by EIC. | | 50 | Each |
|---|
| 77 | 81 | S&F in repair steel peg stay for closing , opening and locking facilities for window all as specified and directed by EIC. | | 50 | Each |
|---|
| 78 | 82 | Taking down frames not exc 1.5 sqm with shutters ( without taking off shutters from the frame) all as specified and directed by EIC. | | 15 | Each |
|---|
| 79 | 83 | S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification | | 15 | Rm |
|---|
| 80 | 84 | M&L for APP modified water proofing membrane weighing not less than 3.0 Kg/Sqm, 3mm thick reinforced with non woven polyester matt weighing not less than 150 gm/Sqm having softening point not less than 140 degree Celsius, longitudinal tensile strength not less than 300 N/Sq cm, tearing strength of 100Nm, by torch application including minimum 10cm side lap and 15 cm end laps over a coat of bitumen primer @0.20 Kg per Sqm and applying a coat of blown grade bitumen 90/15 over the membrane @1.20 Kg/Sqm and finishing with solar reflective aluminium paint applied @0.10 Kg per Sqm over bituminous coat complete over 10 MM thick cement plaster 1:3 with WPC, including cleaning the cement concrete roof surface free from dirt, dust etc and brushing neat cement slurry @3kg/Sqm” all as specified and directed” | | 20 | Sqm |
|---|
| 81 | 85 | M&L for hydraulically pressed burnt clay tiles plain of size 200x200x20/19mm thick or 230x230 machine made laid over 15mm thick cement mortar screed in cm 1:6 and jointed and pointed with cm 1:3 mixed with 5% crude oil by weight of cement , over 150 micron polythene film (1410 Gms/10Sqm),( joints and overlaps sealed with cold bitumen) laid over a tack coat of blown grade bitumen 85/25 @ 1.20 Kg/Sqm including a coat of bituminous primer @ 0.70 Kg/Sqm over 10mm thick cement plaster 1:3 with WPC, including cleaning the cement concrete roof surface free from dirt, dust etc and brushing neat cement slurry @3kg/Sqm | | 5 | Sqm |
|---|
| 82 | 86 | Supply only Integral waterproofing compound complete all as specified. | | 3 | kg |
|---|
| 83 | 87 | Dismantling of wall and ceiling boards (fibre pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, incl cover fillets complete all as specified. | | 15 | Sqm |
|---|
| 84 | 88 | S&F Aluminium snap grid false ceiling of standard aluminium section such as wall angle of size 38mmx 25mmx 2.4mm weighing .36 kg/rm main/cross ties of size 36.5mmx25mmx1.4mm weighing .24kg/rm grid size n exc 610x610mm suspended with 4mm dia GI wire at interwal n exc 600mm centre to centre for cross and main tees fixed to roof slab/roof truss fixed with suitable size hooks of MS and fastening bolts etc incld E board classic 4mm thick oceanic sheet of size n exc 610x610mm fixed in ceiling with clips to snap grid incl preparation of new surface and applying two coats of oil bound distemper over a coat of primer complete all as specified. | | 20 | Sqm |
|---|
| 85 | 89 | Dismantling Asbestos cement ( corrugated , semicorrugated,etc.) sheets in roof covering.complete all as specified. | | 15 | Sqm |
|---|
| 86 | 90 | M&L for 6mm thick asbestos cement corrugated sheets in roof fixed with J bolts.complete all as specified. | | 10 | Sqm |
|---|
| 87 | 91 | M&L for 6mm thick asbestos cement serrated ridge for corrugated sheets fixed with 'J' bolts.complete all as specified. | | 5 | RM |
|---|
| 88 | 92 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.45mm to 0.50 mm thick of any colour having tensile strength 550 mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and directed. | | 20 | Sqm |
|---|
| 89 | 93 | S&F pre-painted galvalume aluminium zinc coating GI based plain sheet 0.45mm to 0.50 mm thick of any colour having tensile strength 550 mpa as in ridges, fixed with self tapping screws all as specified and directed. | | 5 | Sqm |
|---|
| 90 | 94 | S&Fin repair hat pegs and coat hooks solid body made of aluminium (175mm to 250mm) all as specified and directed | | 100 | Each |
|---|
| 91 | 95 | S&F in for alumium door stay with removable brush including removing and fixing in door bottom sizes (1m to 1.2) all as specified and directed | | 50 | Each |
|---|
| 92 | 96 | S&Fin repair sinks with drainage board Made of stainless steel 1mm thick kitchen or laboratory with plugs , washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantiliver brackets and connecting union to pipe overallsize 915mmx460mm bowl size 410mmx330mmx180mm complete all as specified. | | 5 | Each |
|---|
| 93 | 97 | S&Fin repair made of stainless steel 1mm to 2mm thick kitchen rack (1m lenghtx1m height x90cm width) with plugs , washers bolt & nuts including removing and fixing all as specified and directed | | 5 | Each |
|---|
