| 1 | 1 | Supplying fitting fixing of MS frame sunshade with poly carbonate sheetingas per design including fitting fixingall complete \n(Size of window sunshade 2.2 m. X 0.9 m.) \n(rate analysis enclosed)\n | BI01010001010000000000000515BI0100001113 | 24 | Each |
|---|
| 2 | 2 | Supplying, Aluminium Grill with F channel frame of approved make and\nbrand having ultimate tensile strength of 19 Kg/Sq.m. and modulus of\nelasticity 7000 kg/ sq.m., with 15 micron anodised fitted & fixed with\nnecessary screws etc. complete as per direction of Engineer-in-charge.\nGrill made with 10 mm wide and 5.2 mm thick aluminium sheet having\nexpansion width of 66.00 mm and weight not less than 3.26 Kg/Sq.m.\n(Page 247, Item 18)\n | BI01010001010000000000000515BI0100001114 | 63 | Sqm |
|---|
| 3 | 3 | Supplying, fitting & fixing polycarbonate sheet of approved make & brand conforming to IS: 14443-1997 and having 50 micron UV protection layer under co-extrusion technology, Fire rating being B-s1 as per EN13501-1 certification, fitted and fixed with 60mm wide aluminium channel section top and bottom member in dry-glaze sandwitch system, (unit wt.\nof top and bottom members: 0.375 kg/m & 0.69 kg/m) of approved brand and profile, EPDM quality rubber gaskets, anti dust tape, end closer \"C\" channel and 75 mm long Self tapping screw being drilled through the centre leg of the bottom section with nuts placed at 300 mm apart without anyway puncturing the polycarbonate sheet, EPDM Washer 16 mm dia & 3 mm thick washer etc complete strictly as per manufacturers specification and direction of Engineer-in- Charge. (Payment to be made on area of finished work) .\nIn Roof:- Natural/ Blue/Green/Bronze/Opal/Metallic grey colour With 2 wall 10 mm overall thickness\n(wt.1.70kg/sqm,Ugvalue being 3.1 W/m2K, Min. cold bending\nradius of 1200 mm) \n(Page 86, Item 22) | BI01010001010000000000000515BI0100001115 | 16.25 | Sqm |
|---|
| 4 | 4 | M.S. structural works in roof trusses with tubular sections\nconforming to IS: 806-1968 & IS: 1161- 1998 ............................,\n....... all incidental chages such as electricity charges, labour\ninsurance charges etc. \ni) For trusses spanning up to 12.00 m\n(Page 85, item 2 of 2nd. corrigendum) | BI01010001010000000000000515BI0100001117 | 174.71 | KG |
|---|
| 5 | 5 | (a) Priming one coat on steel or other metal surface with synthetic oil\nbound primer of approved quality including smoothening surfaces by sand\npapering etc.\n(Page 200, Item 1) | BI01010001010000000000000515BI0100001118 | 1 | LS |
|---|
| 6 | 6 | (A) Painting with best quality synthetic enamel paint of approved make\nand brand including smoothening surface by sand papering etc. including\nusing of approved putty etc. on the surface, if necessary :\n(b) On steel or other metal surface :\ntwo coats\n(Page 200, Item 2) | BI01010001010000000000000515BI0100001119 | 1 | LS |
|---|
| 7 | 9 | SUB TOTAL | BI01010001010000000000000515BI0100001192 | | |
|---|
| 8 | 10 | Add GST @ 12% | BI01010001010000000000000515BI0100001193 | 1 | No |
|---|
| 9 | 11 | Labour welfare cess@1% of C. | BI01010001010000000000000515BI0100001194 | 1 | No |
|---|
