Maintenance Of Dda Staff Quarters At Mayur Vihar , Ph . -I . Maintenance Work I/C P/F Sanitary Fittings/Fixtures , Other Fittings And Providing Manpower At Dda Staff Quartersat Pkt-I , Ii And Iii , Mayur Vihar , Phase-I

Tender Notice

Maintenance Of Dda Staff Quarters At Mayur Vihar , Ph . -I . Maintenance Work I/C P/F Sanitary Fittings/Fixtures , Other Fittings And Providing Manpower At Dda Staff Quartersat Pkt-I , Ii And Iii , Mayur Vihar , Phase-I

Tender Details

Maintenance Of Dda Staff Quarters At Mayur Vihar , Ph . -I . Maintenance Work I / C P / F Sanitary Fittings / Fixtures , Other Fittings And Providing Manpower At Dda Staff Quartersat Pkt-I , Ii And Iii , Mayur Vihar , Phase-I

Key Value

Document Fees
Refer document
Refer document
Tender Value
INR 25.10 Lakhs /-


FileName File Description File Size
0E50B650-2632-4641-9C38-98B4A2A83C84.html Tender Notice-Tender Notice 0
Tendernotice_1.pdf Tender Document-Tender notice 429.02
BOQ_649917.xls Tender Document-BOQ 406.00
NIT24MaintenanceworkatDDAStaff.pdf Tender Document-NIT 1120.21

Other Information

Additional Details Available on Click
✓ Tendering Authority
✓ Publication Document
(Tender Document / Tender Notice )

BOQ Items

Name of Work: M/O DDA Staff Quarters at Mayur Vihar, Ph.-I. Sh:- Maintenance work i/c P/F sanitary fittings/fixtures, other fittings & providing manpower at DDA Staff Quarters at Pkt-I, II & III, Mayur Vihar, Phase-I
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Providing and fixing brass bib cock of approved quality : a) 15 mm nominal bore BI01010001010000000000000515BI0100001118 195 each
2 2 Providing and fixing PTMT pillar cock of approved quality and colour. a) 15 mm nominal bore, 107 mm long, weighing not less than 110 gms BI01010001010000000000000515BI0100001119 55 each
3 3 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15mm nominal bore BI01010001010000000000000515BI0100001120 90 each
4 4 Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. a) 25 mm diameter. BI01010001010000000000000515BI0100001121 504 metre
5 5 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : a) 250x10 mm BI01010001010000000000000515BI0100001122 125 each
6 6 Providing and fixing aluminium sliding door bolts, ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868),transparent or dyed to required colour or shade, with nuts and screws etc. complete a) 250x16 mm BI01010001010000000000000515BI0100001123 125 each
7 7 Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. BI01010001010000000000000515BI0100001124 55 each
8 8 Providing and fixing to existing door frames. a) 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter). BI01010001010000000000000515BI0100001125 118 sqm
9 9 Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 plyveneering with vertical grains or cross bands and face veneers on both faces of shutters: a) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws BI01010001010000000000000515BI0100001126 48 sqm
10 10 Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 kg. BI01010001010000000000000515BI0100001127 36 each
11 11 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : a) Rectangular shape 453x357 mm BI01010001010000000000000515BI0100001128 55 each
12 12 Providing and fixing toilet paper holder : a) C.P. brass BI01010001010000000000000515BI0100001129 55 each
13 13.1 Providing and fixing soil, waste and vent pipes : a) 100 mm dia Sand cast iron S&S pipe as per IS: 1729 BI01010001010000000000000515BI0100001130 18 metre
14 13.2 b) 75 mm diameter Sand cast iron S&S pipe as per IS: 1729 BI01010001010000000000000515BI0100001131 36 metre
15 14.1 Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes : a) 75 mm dia pipe BI01010001010000000000000515BI0100001132 40 each
16 14.2 b) 100 mm dia pipe BI01010001010000000000000515BI0100001133 20 each
17 15.1 Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2coarse sand : 4 graded stone aggregate 20 mm nominal size),including cost of cutting holes and making good the walls etc. : a) For 100 mm dia pipe BI01010001010000000000000515BI0100001134 20 each
18 15.2 b) For 75 mm dia pipe BI01010001010000000000000515BI0100001135 40 each
19 16.1 Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete a) 100 mm dia Sand cast iron S&S as per IS - 1729 BI01010001010000000000000515BI0100001136 10 each
20 16.2 b) 75 mm dia Sand cast iron S&S as per IS - 1729 BI01010001010000000000000515BI0100001137 20 each
21 17.1 Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : a) 100x100x100x100 mm Sand cast iron S&S as per IS - 1729 BI01010001010000000000000515BI0100001138 10 each
22 17.2 b) 75x75x75x75 mm Sand cast iron S&S as per IS - 1729 BI01010001010000000000000515BI0100001139 20 each
23 18 Providing & fixing White vitreous china water closet squatting pan(Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in-charge. a) Orissa pattern W.C Pan of size 580x440 mm BI01010001010000000000000515BI0100001140 25 each
24 19 Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. BI01010001010000000000000515BI0100001141 25 each
25 20 Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in- charge. BI01010001010000000000000515BI0100001142 40 each
26 21 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fittings and the base support for tank. BI01010001010000000000000515BI0100001143 40000 per litre
27 22 Providing and fixing uplasticised PVC connection pipe with brass unions a) 30 cm length 115 mm nominal bore BI01010001010000000000000515BI0100001144 55 each
28 23 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : a) 100 mm diameter BI01010001010000000000000515BI0100001145 55 each
29 24 Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings a) Flat back wash basin of size 630x450 mm BI01010001010000000000000515BI0100001146 40 each
30 25 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink asper IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : a) Kitchen sink without drain board i) 610x510 mm bowl depth 200 mm BI01010001010000000000000515BI0100001147 25 each
31 26 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe a) 32 mm dia BI01010001010000000000000515BI0100001148 60 each
32 27 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. (a) Single socketed pipes 110 mm diameter BI01010001010000000000000515BI0100001149 158 metre
33 28 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. a) 10 litre capacity - White BI01010001010000000000000515BI0100001150 30 each
34 29 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. a) 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. BI01010001010000000000000515BI0100001151 55 each
35 30 Providing and fixing PTMT soap Dish Holder having length of 138mm,breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. BI01010001010000000000000515BI0100001152 55 each
36 31 Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. a) 15 mm nominal bore, 105 mm long, weighing not less than 138 gms BI01010001010000000000000515BI0100001153 30 each
37 32.1 Providing and fixing PTMT grating of approved quality and colour - Circular type. a)100 mm nominal dia BI01010001010000000000000515BI0100001154 60 each
38 32.2 b) 125 mm nominal dia with 25 mm waste hole BI01010001010000000000000515BI0100001155 40 each
39 33 Supplying and fixing C.I. cover without frame for manholes : a) 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg BI01010001010000000000000515BI0100001156 36 each
40 34 Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. BI01010001010000000000000515BI0100001157 360 kg
41 35 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. a) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. BI01010001010000000000000515BI0100001158 360 kg
42 36 Welding by gas or electric plant including transportation of plant at site etc. complete. BI01010001010000000000000515BI0100001159 5500 cm
43 37.1 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : a) 75 to 80 mm dia pipe BI01010001010000000000000515BI0100001160 36 metre
44 37.2 b) 100 mm dia pipe BI01010001010000000000000515BI0100001161 176 metre
45 38 Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. BI01010001010000000000000515BI0100001162 30 each
46 39 Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge. BI01010001010000000000000515BI0100001163 25 each
47 40 Day to day cleaning, sweeping, brooming of staircase and area between Building Blocks at DDA Staff Quarters by deploying of one no. of Environment Assistant at Mayur Vihar, Phase 1. BI01010001010000000000000515BI0100001164 365 each
48 41 Deploying one no. of 2nd class assistant Fitter to attend complaints of plumbing and sanitary fittings. BI01010001010000000000000515BI0100001165 80 each
49 42 Deploying one no carpenter to attend complaints of wooden fixing and fixtures Note: Twice a week BI01010001010000000000000515BI0100001166 104 each
50 43 Deploying one no. of Mason for minor repair/fixing works Note: Twice a week BI01010001010000000000000515BI0100001167 104 each
51 44 Supply of Portland Cement (OPC-43 Grade) BI01010001010000000000000515BI0100001168 3 tonne
52 45 Supply of Coarse sand (zone III) BI01010001010000000000000515BI0100001169 5 cum
53 46 Supply of stone aggregate 10mm single size. BI01010001010000000000000515BI0100001170 5 cum
54 47 Deploying one no. of beldar for assisting plumber, carpenter and other minor repair works BI01010001010000000000000515BI0100001171 104 each
55 48 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. BI01010001010000000000000515BI0100001172 124 cum
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2021 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail