Regarding Repair & Construction Work Of Old & New Line Under Full Deposit Work Scheme In The Area Of Edsd-I, Parikshitgarh Under Edd-Ii, Mawana, Mawana-Uttar Pradesh

Regarding Repair & Construction Work Of Old & New Line Under Full Deposit Work Scheme In The Area Of Edsd-I, Parikshitgarh Under Edd-Ii, Mawana-1 Cartage Of Following Material From Store Center Meerut To Je Store Including Loading & Unloading At Both Ends Maximum Distance Up To 40 Km. :– 2 A ) Pcc Pole 8.5 Mrt Long / St Pole 11 Mtr Long. 3 Cartage Of Line Material From Store Centre To Dump Site & Then Dump Site To Site Of Work On Day To Day Basis, Including Loading & Unloading At Both Ends Maximum Distance Up To 20 Km. ( 15 Qtl. ) 4 Cartage Of 10 Kva To 100 Kva Transformer From Store Centre To Site Of Work Including Loading & Unloading At Both Site 5 Cartage Of Following Material From Je Store To Site Of Work Including Loading & Unloading At Both Ends Maximum Distance Up To 40 Km. :– A ) Pcc Pole8.5 Mrt Long / St Pole 11 Mtr Long. 6 Safe Cartage Of Ct / Pt Of Diffrent Ratio From Store Centre Meerut To Site Of Work Including Loading And Unloading At Both Ends. 7 Dissmentling Of Damaged & Broken P.C.C. / S.T.Pole / R.S. Joist By Digging The Pits & Removel Of Complete H.T. / L.T. Line Accessories . 8 Eartingh Of Each 11 Kv Line Pople & T / F Properly After Drive Of Electrodes If Size 20Mmx250mm And Connection The Earthing Point With Gl Wire. 9 Erection Of Pcc Pole 8.5 Mtr Long / Stp Pole 11 Mrt Long After Digging A Pit Of Size 1.20 X 0.60 X 1.6 Mtr In All Type Of Soil Including Back Filling Of The Pole With Proper Ramming After Completion Of Work. 10 Fabrication And Fixing Of All 11 Kv H.T / L.T. Line Accessories. 11 Erection Of Double Pole On Pcc Pole 8.5 Mtr After Digging Of Pit Of Required Size Including Fabrication And Fixing Of Top Channel, Droper Channel & Base Channel Alongwith, Fixing All 11 Kv Accessories Tpmo, Fuse Set 11 Kv Pin Insulators And Making Connection Properly. 12 Mounting Of 10 To 100 Kva T / F With Proper Jumping Of Ht Side And Fixing Of Cable On Lt. Side Of T / F Making Connection Properly. 13 Making A Section Pole To Exist Pole After Fabrication & Fixing Of T Channel Fixing Of All 11 Kv Accessories. 14 Erection Of Stay Rod Complete After Digging A Pit Of Size 1.20 X 0.60 X 1.6 Mtr And Grouting The Same In Block Of Size 0.60 X 0.60 X 0.30 Mtr And Nuzzling At The Both Ends And Filling The Pit With Excavated Earth Soil With Proper Ramming. 15 Laying Lifting Stringing Of Proper Sagging Of Acsr Weasel Conductor For 3 Phase, 3 Wire 11 Kv Line Including Binding & Jumpering Properly. 16 Laying Lifting Stringing Of Proper Sagging Of Acsr Rabbit Conductor For 3 Phase, 3 Wire 11 Kv Line Including Binding & Jumpering Properly. 17 Laying Lifting & Sagging Of Lt Line With A.C.S.R. Weaseal / Rabbit Conductor Including Proper Binding & Jumpring:- Na ) 3 Phase 4 Wire Line. 18 B ) 2 Phase 3 Wire Line. 19 C ) 1 Phase 2 Wire Line 20 Guarding Of Line With G.I. Wire Having 2 No Horizontal Wire& 3 Mtr Distance Odf Laces Of Ten Swg G.I Wire After Fabrication Of Guard Cross Arms Of & Fixing The Same In Supports. 21 Cutting & Chopping Tree Branches Near Side Of Line For Making The Clearance Between Line And Tree ( Near About 100 Branches ) . 22 Fixing Of Lt Distribution Box Along With Providing Clamp Nut & Bolts 23 Providing And Fixing Stay Clamps . 24 Providing And Fixing Holding Clamps . 25 Providing And Fixing Lt Clamps . 26 Providing And Fixing Lt Insulator Clamps . 27 Providing And Fixing Bolt And Nuts . 28 Installation Of Ct / Pt & Making Connection Properly 29 Fixing Of 11 Kv Heat Shrinkable Cable Jointing Kits

INR 1180 /-

INR 2000.0 /-

Refer document