| 1 | 1 | Painting with aluminium paint of approved brand and manufacture to give an even shade: One or more coats on old work. | item1 | 1784.74 | SQM |
|---|
| 2 | 2 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One or more coats on old work. | item2 | 880.26 | SQM |
|---|
| 3 | 3 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade One or more coats on old work. | item3 | 1498.49 | SQM |
|---|
| 4 | 4 | Finishing walls with Acrylic Smooth exterior paint of required shade Old work (One or more coat applied @ 0.90 ltr/10 sqm). | item4 | 752.49 | SQM |
|---|
| 5 | 5 | 12 mm cement plaster of mix : cement mortar 1:4 (1 cement : 4 fine sand). | item5 | 47.4 | SQM |
|---|
| 6 | 6 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | item6 | 705.09 | SQM |
|---|
| 7 | 7 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complet | item7 | 299.7 | SQM |
|---|
| 8 | 8 | Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete.Kiln seasoned and chemically treated hollock wood. | item8 | 0.115 | CUM |
|---|
| 9 | 9 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position. sal wood. | item9 | 0.3168 | CUM |
|---|
| 10 | 10 | Providing and fixing plain lining with necessary screws/nuts & bolts/nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-incharge (Frame work shall be paid for separately).12mm thick commercial ply conforming to IS : 1328 BWR type | item10 | 140.8 | SQM |
|---|
| 11 | 11 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil. | item11 | 66 | SQM |
|---|
| 12 | 12 | Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. | item12 | 66 | SQM |
|---|
| 13 | 13 | Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM,D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/ 3 mm thick | item13 | 107.1 | SQM |
|---|
| 14 | 14 | Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete.With 12 mm mild steel U beading. | item14 | 42.3 | SQM |
|---|
| 15 | 15 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) | item15 | 33.12 | SQM |
|---|
| 16 | 16 | Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. | item16 | 8.2 | SQM |
|---|
| 17 | 17 | Providing and fixing water closet squatting pan (Indian type W.C pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. | item17 | 2 | Each |
|---|
| 18 | 18 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. | item18 | 2 | Each |
|---|
