Delhi University has published Replacement Of Damaged Ac Sheet Roofing And Painting Etc Of General Store At Sol ( North ) , University Of Delhi. Submission Date for this Tender is 25-02-2021. Shed Construction Tenders in SCHOOL OF OPEN LEARNING Delhi. Bidders can get complete Tender details and download the document.
Name of Work: Replacement of Damaged AC sheet roofing and painting etc of General Store at SOL (North), University of Delhi. | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1.01 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:\nA)\tAsbestos cement sheet | BI01010001010000000000000515BI0100001113 | 368 | Sqm |
2 | 1.02 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. \nA)\t Hot finished welded type tubes | BI01010001010000000000000515BI0100001114 | 858 | Kg |
3 | 1.03 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | BI01010001010000000000000515BI0100001115 | 368 | Sqm |
4 | 1.04 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | BI01010001010000000000000515BI0100001116 | 700 | Sqm |
5 | 1.05 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade \nA)\t Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface | BI01010001010000000000000515BI0100001117 | 200 | Sqm |
6 | 1.06 | 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001118 | 2 | Cum |
7 | 1.07 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. \nA) With cement mortar 1:4 (1 cement : 4 fine sand) | BI01010001010000000000000515BI0100001119 | 100 | Sqm |
8 | 1.08 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : \nA)\t One or more coats on old work | BI01010001010000000000000515BI0100001120 | 60 | Sqm |
9 | 1.09 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | BI01010001010000000000000515BI0100001121 | 25 | Cum |
10 | 1.1 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:\nA)\tFloat glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) | BI01010001010000000000000515BI0100001122 | 15 | Sqm |
11 | 1.2 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification.\n A ) Two or more coats on new work | BI01010001010000000000000515BI0100001123 | 700 | Sqm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail