| 1 | 1 | Description of items and specification of work to be excuted. | BI01010001010000000000000515BI0100001112 | | |
|---|
| 2 | 1.01 | Taking out of old /damaged /sunken Ramp / wall including collecting the R.R. Stone at Suitable Place for reuse & disposal of Malba lead up to 100 mtr. by head load etc complete. | BI01010001010000000000000515BI0100001113 | 8.68 | Cum. |
|---|
| 3 | 1.02 | Removal /taking out the dead weathered/ cracked / damaged Plaster of thickness (20 to 25 mm) mm average of wall very carefully disposal the unserviceable material lead up to 100 mtretc complete | BI01010001010000000000000515BI0100001114 | 104.14 | Sqm. |
|---|
| 4 | 1.03 | Removal / Taking out the cracked, dead and decayed lime concrete avg. thickness (10 cm) & disposal of malba by head load upto 100 & lift 4 mtretc complete. | BI01010001010000000000000515BI0100001115 | 4.66 | Cum. |
|---|
| 5 | 1.04 | Providing & laying (20 to 25 mm) average thick plaster of wall of Room in lime Surkhi mortar 1:1:1 (1 lime : 1 c.sand : 1 surkhi) mixed adhesive material with water proofing compound &moulding as per original etc. Complete | BI01010001010000000000000515BI0100001116 | 104.14 | Sqm. |
|---|
| 6 | 1.05 | Providing & laying 1:2 lime concreting of Roof terrace & floor portion with 50% (20 to 10) mm down size brick Agg. & 50% of lime Surkhi mortar 1:1:1 (1 lime : 1 surkhi : 1 c.sand)mixed with adhesive material with binding solution of belgarigud, methi& Jute and adhesive material beating with bamboo stick first & then with thaphi till the surface is harden maintain the proper slope & top smooth surface finishing etc. complete in all respect. | BI01010001010000000000000515BI0100001117 | 4.66 | Cum. |
|---|
| 7 | 1.06 | Providing & fixing the Red Sand Stone Flooring 20 mm thickness ( Bijoliya /BanshiPaharpur Quarry) fine chiselled dressed stone flooring over 20 mm thick of lime surkhimortor 1:1:1 ( 1Lime: 1 Surkhi:1 C.Sand) mixed with adhesive Material with joint finished etc complete. | BI01010001010000000000000515BI0100001118 | 46.61 | Sqm. |
|---|
| 8 | 1.07 | Provision for Providing Placing and fixing of Aluminium frame work for fixing of ACP in Position with the help of drilling & screwing the Aluminium section to the wall with help of plumb , & other equipmentsetc complete in all respect. | BI01010001010000000000000515BI0100001119 | 308.88 | KG |
|---|
| 9 | 1.08 | Provision for providing & fixing of ACP (3 mm thick) wall panelling over the Aluminium framed work ,using screws silicon & other firetures as & where required as per approved colour by the Superiors . | BI01010001010000000000000515BI0100001120 | 55.06 | Sqm |
|---|
| 10 | 1.09 | Taking out of old /damaged /sunken Ramp / wall including collecting the R.R. Stone at Suitable Place for reuse & disposal of Malba lead up to 100 mtr. by head load etc complete. | BI01010001010000000000000515BI0100001121 | 11.41 | Sqm |
|---|
| 11 | 1.1 | Provision for electrification work by mean of Condit pipe work ( Squire shape) Led Light, Power Switch etc complete pedestal fan 400 mm | BI01010001010000000000000515BI0100001122 | 1 | Nos |
|---|
| 12 | 1.11 | Led complete light 18 W Phillips | BI01010001010000000000000515BI0100001123 | 2 | Nos |
|---|
| 13 | 1.12 | Led tube light 20 W Phillips | BI01010001010000000000000515BI0100001124 | 2 | Nos |
|---|
| 14 | 1.13 | Ceiling Light Small 6 WtHavels | BI01010001010000000000000515BI0100001125 | 4 | Nos |
|---|
| 15 | 1.14 | Ceiling Light Center 12 WtHavels | BI01010001010000000000000515BI0100001126 | 1 | Nos |
|---|
| 16 | 1.15 | Exhoust Fan fiberHavels | BI01010001010000000000000515BI0100001127 | 1 | Nos |
|---|
| 17 | 1.16 | Copper wire 1 mm ( Polycab) | BI01010001010000000000000515BI0100001128 | 1 | Bdl |
|---|
| 18 | 1.17 | Copper wire 1.5 mm ( Polycab) | BI01010001010000000000000515BI0100001129 | 2 | Bdl |
|---|
| 19 | 1.18 | Copper wire 2.50 mm ( Polycab) | BI01010001010000000000000515BI0100001130 | 1 | Bdl |
|---|
| 20 | 1.19 | Switch 10 Amp.AncherPenta | BI01010001010000000000000515BI0100001131 | 12 | Nos |
|---|
| 21 | 1.2 | Switch 20 Amp.AncherPenta | BI01010001010000000000000515BI0100001132 | 3 | Nos |
|---|
| 22 | 1.21 | Socket 20 Amp.AncherPenta | BI01010001010000000000000515BI0100001133 | 4 | Nos |
|---|
| 23 | 1.22 | Casing Patti 50 mm -2 mtr Each | BI01010001010000000000000515BI0100001134 | 16 | Nos |
|---|
| 24 | 1.23 | joints | BI01010001010000000000000515BI0100001135 | 10 | Nos |
|---|
| 25 | 1.24 | Roma Switch Plate 3\"x 5 | BI01010001010000000000000515BI0100001136 | 1 | Nos |
|---|
| 26 | 1.25 | Roma Switch Plate 3\"x 8 | BI01010001010000000000000515BI0100001137 | 3 | Nos |
|---|
| 27 | 1.26 | PVC Box 3'x8' | BI01010001010000000000000515BI0100001138 | 3 | Nos |
|---|
| 28 | 1.27 | PVC Box 3'x 8' | BI01010001010000000000000515BI0100001139 | 1 | Nos |
|---|
| 29 | 1.28 | MCB 32 AMP | BI01010001010000000000000515BI0100001140 | 1 | Nos |
|---|
| 30 | 1.29 | Labour charges for electric fitting | BI01010001010000000000000515BI0100001141 | 1 | Job Work |
|---|
| 31 | 1.3 | Door mate of size 3’ x 1 ½ ‘ | BI01010001010000000000000515BI0100001142 | 1 | Nos |
|---|
| 32 | 1.31 | Cartage charges from market to working site | BI01010001010000000000000515BI0100001143 | 1 | Job Work |
|---|
| 33 | 1.32 | Provision of Material for baby care Room as per required. As the following (i) Diaper changing folding table for baby make with 19 mm board and finished with mica size of 2'x 2.50'including base | BI01010001010000000000000515BI0100001144 | 1 | Nos |
|---|
| 34 | 1.33 | long chair 52\"height with sofa design in back and seat make with 32 density foam covered with required color matting cloth | BI01010001010000000000000515BI0100001145 | 1 | Nos |
|---|
| 35 | 1.34 | Side table make with teak wood 13\"x 13 \" size and 8 mm thick glass top complete with polish | BI01010001010000000000000515BI0100001146 | 1 | Nos |
|---|
| 36 | 1.35 | PVC Dust bin 10 ltr capacity | BI01010001010000000000000515BI0100001147 | 1 | Nos |
|---|
| 37 | 1.36 | Steness steel Big Bed ( Round eges) Size 3'x 6 '\n\n | BI01010001010000000000000515BI0100001148 | 1 | Nos |
|---|
| 38 | 1.37 | Matress Size 3'x6 ' good quality | BI01010001010000000000000515BI0100001149 | 1 | Nos |
|---|
| 39 | 1.38 | Signages 5 mm thick ACP sheet Size 2x2x3 Fit= 12 Sqfit | BI01010001010000000000000515BI0100001150 | 12 | Fit |
|---|
| 40 | 1.39 | Cartage charges from markite to working site | BI01010001010000000000000515BI0100001151 | 1 | Lum Sum |
|---|
| 41 | 1.4 | Providing and fixing aluminium work for doors , window ,ventilation and partitions with extruded built up standard tubular section/ appropriate Z section and other section of approved make conforming to IS:733 And IS 1285 , fixing with dash fasteners of required dia and size including necessary filling up the gaps at junction i.e at top bottom and sides with required EPDM rubber/ neoprene gasket etc . Aluminium section shall be smooth ,rust free straight, metered and jointed mechanically wherever required including cleat angle , aluminium snap beading for glazing / panelling C.P brass/ stainless steel screws, all complete as per architectural drawing and fixed 5 mm thick ACP Sheet and 5 mm thick glass as per requirement as per the direction of engineer in charge.\n\n | BI01010001010000000000000515BI0100001152 | 11.41 | Sqm |
|---|
| 42 | 1.41 | \"Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with\" | BI01010001010000000000000515BI0100001153 | 11.41 | Sqm |
|---|
| 43 | 1.42 | Provision for errection wooden scaffolding working platform work upto height 3 mts.& its dismantling after completion of the work. | BI01010001010000000000000515BI0100001154 | 85.36 | Sqm |
|---|
