}

Construction Of The Assam Type Administrative Building At Industrial Park , Jabjabkuchi , Dist Nalbari , Assam, Jabjabkuchi, Dist Nalabri Assam-Assam

Assam Industrial Development Corporation Limited-AIDCLTD has published Construction Of The Assam Type Administrative Building At Industrial Park , Jabjabkuchi , Dist Nalbari , Assam. Submission Date for this Tender is 26-02-2021. Building Work Tenders in Jabjabkuchi, Dist Nalabri Assam Assam. Bidders can get complete Tender details and download the document.




Tender Notice

26877979
Construction Of The Assam Type Administrative Building At Industrial Park , Jabjabkuchi , Dist Nalbari , Assam
Open Tender
Indian
Assam
Jabjabkuchi, Dist Nalabri Assam
26-02-2021

Tender Details

Construction Of The Assam Type Administrative Building At Industrial Park , Jabjabkuchi , Dist Nalbari , Assam

Key Value

Document Fees
INR 3000 /-
EMD
INR 182000.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: Construction of the Assam Type Administrative Building at at Industrial Park, Jabjabkuchi, Dist: Nalbari, Assam.
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Civil Work
2 2 Earth work in excavation for foundation trenches of walls, retaining walls, footings of columns, steps, septic tank etc., including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in following classifications of soils including bailing out water where necessary as directed and specified.\n(b) In hard/ dense soil. \n(A) Upto a depth of 2m below the existing ground level. item2 150 Cum
3 3 Providing brick soling in foundation and under floor with stone/best quality picked Jhama brick, sand packed and laid to level and in panel after preparing the sub grade As directed including all lab our and materials and if necessary dewatering, complete.\n(a).Brick on flat soling. item3 547 Sq,M
4 4 Plain cement concrete works with coarse aggregate, of sizes 13mm to 32mm in foundation bed for footing, steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete(Shuttering where necesary shall be measured and paid separately) (a) In prop 1cement: 3 sand :6 coarse aggregate by volume item4 12 Cum
5 5 Plain cement concrete floor base in prop1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. c) 100mm thick item5 329 Cum
6 6 Providing and laying 25mm thick Damp proof coarse with cement concrete in prop. 1:1.5:3 with graded stone agg. Of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacture in cluding curing etc. complete as directed. item6 27 Sq.m.
7 7 (R.C.C.) Reinforced cement concrete work: (i) Using mixture machine. (A) In sub-structure upto plinth level. Foundation, footings, columns with base, tie and plinth beam, pile cap, base, slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. (N) Without using admixture, plasticiser,(b) M-20 or Proportion in 1:1.5:3 item7 69 Cum.
8 8 R.C.C.) Reinforced cement concrete work: (i) Using mixture machine.(B) In superstructure from plinth level to 1st floor level. (ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder,bressumer, cantilever, staircase (except spiral stair case and landing) including preparing the top surface and finishing of nosing. (N) Without using admixture, plasticiser. (b) M-20 or Proportion in 1:1.5:3 item8 28 Cum
9 9 Providing precast R.C.C slab over drain ,septic tank etc. in prop. 1:2:4 reinforced with 10mm M.S. bar @ 150mm centre both ways tying with 20 gauge black annealed wire with necessary shuttering , curing etc. complete including fixing in position as directed.a) 100mm thick slab item9 9 Sq.m.
10 10 Timber shuttering (Formwork). Providing formwork of formwork of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc. heigth of propping and centering below supporting floor to ceiling not exiding 4.0m and removal of the same for in situ reinforced concrete and plain concrete work in Foundation, footings, base ofcolumn, pile cap, raft and mass concrete works etc. (b) Using 25mm thick plank item10 91 Sq.m.
11 11 Timber shuttering (Formwork). Providing formwork of formwork of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc. heigth of propping and centering below supporting floor to ceiling not exiding 4.0m and removal of the same for in situ reinforced concrete and plain concrete work in Columns, pilars, pots & Strut of quare/rectangular/polygonal in plain or any shape like Tee/L etc. Having plain vertical face.. (b) Using 25mm thick plank item11 285 Sq.m.
12 12 Timber shuttering (Formwork). Providing formwork of formwork of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc. heigth of propping and centering below supporting floor to ceiling not exiding 4.0m and removal of the same for in situ reinforced concrete and plain concrete work in Sides of tie beams, grade beams etc. at or below ground level.. (b) Using 25mm thick plank item12 319 Sq.m.
13 13 Timber shuttering (Formwork). Providing formwork of formwork of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc. heigth of propping and centering below supporting floor to ceiling not exiding 4.0m and removal of the same for in situ reinforced concrete and plain concrete work Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties.. (b) Using 25mm thick plank item13 149 Sqm.
14 14 Timber shuttering (Formwork). Providing formwork of formwork of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc. heigth of propping and centering below supporting floor to ceiling not exiding 4.0m and removal of the same for in Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like. (b) Using 25mm thick plank item14 75 Sqm.
15 15 Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete (upto 1st floor level). (A) From primary produccer : TATA/SAIL/Jindal steel/Shyam steel/RINL. (i) TMT Corrosion resistant steel (CRS) reinforecment bar item15 85 Qtl.
16 16 230mm thick brick wall in cement morter with 1st class brick including racking out joints and curing complete as directed in structure. (i) In Sub-structure upto plinth level including dewatering if necessary. (b). In proportion 1:4. item16 141 Sq.m.
17 17 Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary. (b) In proportion 1:4. item17 3 Cum.
18 18 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately)\n(A) 112mm thick brick wall\n(a) In cement mortar in proportion 1:4. \n(1 cement:4 sand) item18 678 Sq.m.
19 19 Cement plastering:\n15 mm thick cement plaster in single coat on single or hulf bribkwall for interior plastering upto 1st floor level including arises, internal rounded angles, not exeeding 80 mm girth and finished event and smooth including curing completed as directed.\n(B) On fair side\nb) In cement mortar 1:4 item19 732 Sq.m.
20 20 20 mm thick cement plaster in two coats, on single or half brick wall for interior brick up to 1st floor leve including arisers, internal rounded angles, chamfers and / or rounded angles not exeeding 80 mm in girth and finishes even and smooth including curing completyed as directed.\n(A) On rough side (backing coat 15 mm and finishing coat 5mm thick)\na) In cement mortar 1:3 item20 726 Sq.m.
21 21 Extra over item above for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed. item21 57 Sq.m.
22 22 Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor. item22 47 Sq.m.
23 23 Extra over item above for providing and mixing water proofing materials in cement mortar in prop as recommended by the manufacturer including curing complete as directed.\nii) 15 mm thick plaster. b) In cement mortar 1:4 item23 1562 Sq.m.
24 24 HERITAGE FINISHING\nSupplying and laying of permanent wall finish for interior and exterior walls with surface coating of Heritage Surface Texture of Bakelite Hylam Limited for all types of buildings at all levels as specified and directed by the department.\n(l) Lineal Finish item24 115 Sqm.
25 25 Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department)\na) Normal range \nSomany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make\nii) Of size 600mmx600mm and above item25 232 Sq.m.
26 26 Providing Antiskid tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement : 3 coarse sand) approved make fix with Fix-A Tile (Choksey/Sika/Pedelite/Rouf) white cement complete at all leve as specificated and directed.\n(B) Vitrified\nii)Executive range-1 (Sizes 600 mm x 300mm and above)\na) Nitco made (Oak Wood) item26 73 Sq.m.
27 27 Providing polished granite slab of approved quality, size, shape and thickness not less than 18 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile Choksey/Sika/Pedelite/Rouf) /white cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of slab and as approved and directed by the Department). \n(iii) Deluxe Quality\n(ii) With White cement item27 5 Sq.m.
28 28 Providing polished vitrified wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/white cement slurry mixed with approved pigment to match shade of tilesc complete at all levels as specified and directed. (coloured pigment should be in conformity with colour of tiles and as approved and directed by the department).\niv) Of size300mmx900mm and above item28 119 Sq.m.
29 29 Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) suspended ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, grill diffusers etc. cut out to be made with the frame of perimeter channel supported suitably and measured and paid separately as and where necessary). (Glass wool to be measured and paid separately). \n(C ) M/F Frame Work with Acoustic Type Fissured Gypboard (Cratone) Tiles (NRC value 0.57 with 50mm glass wool mat backing) 12.5mm thick. item29 263 Sq.m.
30 30 Providing, fitting and fixing powder coated pressed steel door frame made of 1.25mm/ 1.6mm thick sheet of various sizes with necessary hinge jamb, lock jamb, head and steel base ties at the bottom of the frame. The whole frame shall be welded or rigidly fixed together by mechanical means with base ties of pressed mild steel angle of size 20x20x1.25mm thick. Frame to be filled up with 1:4:8 P.C.C. after fitting the frame with brick/ concrete works etc.complete as directed by the department for all levels. (P.C.C. to be measured and paid for seperately).\n(b) 1.60mm thick sheet\n(iii) Size 125mm x 60mm (Single rebate) item30 74 Rm.
31 31 Providing, fitting and fixing 40mm x 48mm wood reinforced PVC chowkhats fixed to the columns / stiffeners / walls with necessary holdfast / sleeves etc. as specified and directed at all levels. item31 35 Rm.
32 32 FRP PANNELED DOOR Supplying & fixing of factory made 30mm thick Fibreglass Reinforced Plastic (FRP) panneled door shutter of required colour of FIBREWAYS made with fire retardant grade unsatured polyster resin,moulded to 3mm thick FRP laminate for forming hollow rails and styles,with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings,cast monolithically with 5mm thick FRP laminate for panels and conforming to IS:14856-2000 including fixing to frames complete as per direction of Engineer-in charge. item32 5.5 Sqm.
33 33 BLOCK BOARD SHUTTERS\nProviding and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws. \na) Decorative type face panel and block board core.\n(ii) 35 mm thick . item33 32 Sqm.
34 34 Providing, fitting and fixing coloured anodised aluminium sliding glazed doors with anodised aluminium frames made of 100mm x 45mm x 2mm section of approved brand with door style of size 81mm x 45mm x 2mm, top rails 55mm x 45mm x 2mm, lock rails 81mm x 45mm x 2mm, fitted with glazing clip, special type rubber gasket complete including roller, tower bolt, aluminium door handle, lock, angles, cleat etc. complete as specified and directed by the department at all levels.\n(iv) Prelaminated Board item34 12 Sq.m.
35 35 WINDOWS / VENTILATORS\nProviding, fitting and fixing steel ventilators (openable) of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15mmx13mmx100mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device, handles, pegs, stays of 300mm long etc. complete including providing 2nos. of 12mmx12mm sq. bars (horizontal) duly welded to steel frame and applying a priming coat of red oxide paint etc. complete as per drawing. \na) Openable item35 33 Sq,M
36 36 Providing, fitting and fixing steel ventilators (openable) of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15mmx13mmx100mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device, handles, pegs, stays of 300mm long etc. complete including providing 2nos. of 12mmx12mm sq. bars (horizontal) duly welded to steel frame and applying a priming coat of red oxide paint etc. complete as per drawing. b) Fixed item36 1 Sqm.
37 37 Providing and fixing stainless steel (Grade 304) railing made of holle tubes, channel, plates etc. including welding, grinding, buffing, polishing nad making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i.c. fixing the ailing with necessary accessaries and stainless steel dash fasteners, stainless steel bolts etc. of required size on the top of the floor or the side of waist slab withsuitable arrangement as epr aproved of engineer incharge. (for payment only weight of stainless steel member is to be considerd. no extra for fixing accessoreis such as nuts, bolts, fasteners etc. will be considered). item37 59 Kg.
38 38 Grills\nProviding, fitting and fixing M.S Grill of required pattern for windows / clearstory windows / opening with M.S. flats at required spacing in frame all round, squre or round M.S bar with round headed bolts and nuts or screws.\n(ii) Ornamental grill.\n(a) Fixed to brick work / P.C.C / R.C.C. item38 234 Kg.
39 39 Roof truss( M.S)\nProviding welding, fitting, fixing, hoisting and fixing of Roof Trusses with purlin, bottom runner etc. fabricated out of combination of two or all of the following sections: (i) square hollow section (SHS) (II) Rectangular section(RHS) (iii) M.S. black tube conforming to relevant I.S. code 1161 - 1986 as per approved design and drawing including M.S, cleat, base plate, bolt and buts which ever reqired, including that required fixing the ceiling and one coat of red oxide Zinc chromate primer to all steel surface etc. completed as directed as per specifications.\na) Using TATA make RHS/SHS of Grade 310 conforming to relevant I.S. code 4923 : 1997 item39 85 Qtl.
40 40 Providing colour coated DURASHINE/TATA BLUESCOPE zinc-aluminium profile sheet (total coated thickness=0.45mm) of nominal 1015mm effective cover width and nominal 28mm deep ribs with subtle square fluting in the five pan at nominal 203mm centre-to-centre including fasteners class 2 SDS, fitting and fixing complete. (Roof trusses, purlins etc. to be measured and paid separately.) \n(C) DURASHINE TILE PROFILE (0.50mm(TCT) x 505mm) item40 338 Sq.m.
41 41 Providing colour coated DURASHINE/TATA BLUESCOPE zinc-aluminium roof , wall and tile profile sheet accessories (total coating thickness=0.45mm) including fasteners class 2 SDS, fitting and fixing complete. (Roof trusses, purlins etc. to be measured and paid separately.)\n(a ) (i) Plain Ridge item41 102 Rm.
42 42 Plaster of paris/wall putty:\nProviding two coats of birla white care wall putty (water resistant white based putty or concrete / mortar wall and ceiling both internal or external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistering the wall with sufficient quantity of clean water as specified and directed by the department. (total thickness of two coats is maximum 1.5mm)\n(ii)Thickness = 1.0mm thick item42 1500 Sq.m.
43 43 a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. item43 1500 Sq.m.
44 44 Wall painting (two coats) with Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth.\n(a).Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) item44 1233 Sq.m.
45 45 Extra over item no 13.4.7 above for every subsequent coat of wall painting with Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).\n(i).Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) item45 1233 Sqm
46 46 Finishing old/ new wall with water proofing weather coat smooth anti-fungal premium textured exterior finish of Sandex Matt brand of Snowcem India Ltd. of required shade after clering and clearing the surfaces etc.including scaffolding complete as directed at all levels (two coats). item46 296 Sqm
47 47 DOORS/ WINDOWS & FITTING
48 47.1 (i) Surfaces over 100mm in width or in girth.\n(a) Hiegh gloss (Assia paint / Berger paint / ICI paint/ J&K paint / Nerolac) item48 235 Sqm
49 47.2 (ii).Surfaces up to 100mm in width or girth.\n(a) Hiegh gloss (Assia paint / Berger paint / ICI paint/ J&K paint / Nerolac) item49 1500 Rm.
50 48 25 mm thick cement concrete topping 1:2:4 (1cement : 2 coarse sand : 4 coarse aggregate of 12 mm nominal size) finished with a floating coat of neat cement finish to be laid in panels including curing complete as directed. item50 46 Sqm.
51 49 B. Electrical Works
52 50 Wiring for light/fan/call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including 6 Amp flush type switch/ bell push (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover ,ceiling rose (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) etc. complete
53 50.1 Short point up to 3.00 metre. length. item53 30 Each
54 50.2 Medium point up to 6.00 metre. Length. item54 35 Each
55 50.3 Long point up to 10.00 metre. Length. item55 35 Each
56 51 Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed 2 mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. mark with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere.
57 51.1 Short point up to 3.00 metre. length. item57 30 Each
58 51.2 Medium point up to 6.00 metre. Length. item58 30 Each
59 51.3 Long point up to 10.00 metre. Length. item59 30 Each
60 52 Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch ( Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. mark with phenolic laminated sheet cover earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.)\n
61 52.1 Long point up to 10.00 metre. Length. item61 30 Each
62 53 Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system.
63 53.1 With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit. item63 180 Metre.
64 53.2 With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. cable in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit. item64 180 Metre.
65 54 Supplying with fitting fixing of 6 amp one way modular clip in bell push MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. item65 175 Each
66 55 Supplying with fitting fixing of 6 amp one way modular clip in bell push with LED, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. item66 175 Each
67 56 Supplying including installation of socket outlet 10/16 Amps 3/5 pin combine shuttered complete , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. item67 30 Each
68 57 Supplying and fixing of batten holder (Anchor Penta PC CHERRY /Gold medal /Kolor kany.kom/Havells or equivalent make as approved by the Deptt.) including connection as approved by the Deptt.)as required Without Lamp item68 30 Nos
69 58 Supplying, installation, testing and commissioning of ceiling fan (1400mm) size complete as per specifications and as directed . item69 30 Nos
70 59 Supplying, installation, testing and commissioning of Exhaust Fan (300mm) size highly duty complete as per specifications and as directed . item70 25 Nos
71 60 Supply, installation & testing of G.I. Plate earth station with 600 mmx600 mmx6 mm heavy duty G.I. earth plate with necessary 40 mm dia. G.I. watering pipe with G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement with 300 mmx300 mmx6 mm hinged cover C.I. cover plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt . item71 2 Nos
72 61 Supplying with fitting and fixing sheet steel, phosphatised, powder painted Single door surface mounting MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. \n 8 way SPN single door item72 2 Nos
73 62 Supplying including installation, commissioning of vermin and dust proof totally enclosed cubical indoor type floor/wall mounting compartmentalize panel board of size 1.25M X0.6MX 0.40M made of 16 SWG1.66 m thick C.R. sheet and 35mm X 35mm X 5mm size angle having 4 no legs at the bottom complete painting with 2 coats of Red Oxide metal primer and 2 coats of Enamel paint. The panel board is to be erected in 1 : 3 : 6 PCC foundation and brick soling / grouting etc. complete neatly Wiring done with provision for one no 125/160A 4pole MCCB or Switch Fuse Unit as incomer and provision for 2nos DP or TPN out going as specified and directed by the deptt. confirming to IP 43 protection comprising of the following electrical items:\n1. 20mm X 3mm 4 strip copper Bus-Bar 0.5M length each\n2. Digital 3 Phase Voltmeter Accuracy class 0.5 - 1 no\n3. Digital 3 Phase Ammeter Accuracy class 0.5 - 1 no\n4. Pilot Lamp with integral ckt LED 110- 230 V (Red, Yellow,& Blue - 3 no\n5. Voltmeter & Ammeter Selector Switch - 2 no\n6. 2 A Slide fuse unit - 3nos\n(Incoming & Outgoing Switch Gear of reqd. rating will be measured and paid separately) item73 1 Nos
74 63 Supplying, installation, testing and commissioning of Call Bell complete as per specifications and as directed . item74 1 Nos
75 64 Supplying, installation, testing and commissioning of wall mounting LT Control panel Board complete as per specifications and as directed .\n(a) 63 Amp. item75 2 Nos
76 65 Supplying, installation, testing and commissioning of bulk head fittings complete as per specifications and as directed . item76 15 Nos
77 66 Supplying, installation, testing and commissioning of BJIR 140 (Bajaj make) / or equivalent tube light complete as required as per specifications and as directed . item77 30 Nos
78 67 Supplying, fitting , fixing, testing and commissioning of 3 Phase single outgoing vertical double door MCBDBS with busbar, 63A TPN isolator, 6A to 16Amp SPMCB-12 Nos. complete as required as per specifications and as directed ( 4-way Type) . item78 2 Nos
79 68 Supplying, installation, testing and commissioning of Out let for Computer point including circuit wiring, earthing etc.as required complete as per specifications and as directed . item79 40 Points
80 69 TELEPHONE CABLING \nSupplying, installation / drawing , testing and commissioning of Telephone cable in recessed wiring system as required complete as per specifications and as directed (with outlet only ). item80 200 M
81 70 (C) EXTRA ITEM OF MAIN BUILDING CIVIL WORK
82 71 Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary forest royelty, sales tax, land compensation, municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantity) etc. complete as directed and specified.\n(b) Other than Guwahati city item82 1800 Cum.
83 72 Earth / sand filling in plinth in layers not more than 150 mm thick including nacessary carriage, watering, ramming,etc. complite as directed and specified including payment of land compensation, forest royalty, sale taxt and other duties and txes as may be nesnecessary.\n(b) With hill sand obtained by truck carriage loading and unloading and carriage to the site of work. item83 176 Cum.
84 73 Pre construction anti - termite treatment by applying in the entire levelled area after plinth filling and before laying floor by applying the emulsion @ 5 (five) litres per square meter of the surface to be spread with light rodding so as to ensure proper absorption by the filled up earth (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete.\na) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution. item84 21 Sq.m.
85 74 Providing drain with cement concrete (1:3:6) 10cm thick sides 10cm thick bed over brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified.\ni). 300mm wide and average 150mm deep with bed slope 1 in 150 with initial depth of 100mm. item85 80 Sq.m.
86 75 ROOF TREATMENT\nGrading roof for water proofing treatment with \n(a) Cement concrete 1:2:4 (cement: 2 coarse sand: 4 graded stone agg. 20 mm nominal size) finished with a floating coat of neat cement including rounding of junctions with floor. item86 3.5 Cum.
87 76 Providing scaffolding using L&T-Doka access scaffold system upto a height of 40m. supported by frames of bamboos/timber H-beams, bracings including suitable couplers, pins, tower spindles and 2nd class timber plank platforms complete as specified and directed by the department. (measurement to be taken on elevation area of the building/ structure). item87 283 Sqm.
88 77 (D) Sanitary and Water supply works
89 78 Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately)\nii) Hindware make\na) White\n(ii) Water closet MALIBU "P (Cat.No.20086) (inclusive of seat cover) item89 7 Each
90 79 Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately)\ni) Parryware make item90 7 Each
91 80 Providing fitting and fixing vitreous china flat back type lipped front urinal basin with standard flush pipe and CP brass spreader andbrass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required.\nA) Parryware make\na) White\n(i) New Magnum (Cat. No.C0575) item91 2 Each
92 81 Supplying fiting and fixing glass division plate of Jaquar make including fitting and fixing compete as directed and specified.\ni) Parryware make \na) White\n(i) Partion Magnum / Large (Cat. No.C0571/07) item92 2 Each
93 82 Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately)\n PEDESTAL BASIN (with pedestal)\n(A) Parryware Make\n(a) White\n(i) Duke 660 x 495 (Cat. No.C8416/27) (white/coloured) item93 9 Each
94 83 Providing fitting & fixing stainless steel kitchen sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including painting the fittings ,cutting &making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately\n(B) Nirali\n(i) Glister Jumbo (Bowl Size - 610 x 460 x 254) Glossy item94 1 Each
95 84 Providing fitting and fixing Decorative Mirror complete as directed and specified.\n(B) Jaquar Make \n(a) Double Arm Wall Mounted reversible plain / Magnifying (3X) Pivotal Mirror (Cat. No.ACN-1193N) item95 9 Each
96 85 Providing, fitting and fixing CP soap tray / soap dish complete as directed and specified.\n(iv) American Standard\n(a) Cubin (Cat. No.CB-00102) item96 9 Each
97 86 Providing, fitting and fixing Chrome Plated towel ring complete as directed and specified.\n(i) Jaquar Make\n(i) Continental towel ring square (Cat.No. ACN-1121) item97 9 Each
98 87 Providing, fitting and fixing Chrome Plated TOILET PAPER holder complete as directed and specified.\n(i) Jaquar Make\n(vii) Kubix toilet roll holder with cover (Cat.No.AKB-35753) item98 7 Each
99 88 Providing, fitting and fixing Chrome Plated waste coupling complete as directed and specified.\n(c) Cera make\n(iii) Waste coupling with pop-up item99 11 Each
100 89 Providing, fitting and fixing Chrome Plated bottle trap complete as directed and specified.\n(c) Cera make \n(ii) Bottle trap 228 mm (9”) (Cat.No.104A) item100 9 Each
101 90 Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. \na) In exposed surfaces or in trenches. \n(ii) 110mm dia. item101 60 Rm.
102 91 Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. (iv) 75mm dia. item102 24 Rm.
103 92 Supplying fiting and fixing PVC Plain single tee of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. \na) In exposed surfaces or in trenches. \n(ii) 110mm dia. item103 14 Each
104 93 Supplying fiting and fixing PVC single tee with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.\na) In exposed surfaces or in trenches. \n(ii) 110mm dia. item104 14 Each
105 94 Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified.\na) In exposed surfaces or in trenches. \n(ii) 110mm dia. item105 12 Each
106 95 Providing fitting and fixing PVC cowel of ISI make complete as directed and specified.\n(iv) 75mm dia. PVC cowel of ISI make item106 4 Each
107 96 Providing fiting & fixing C.I. Grating to the floors complete as directed and specified.\n(a) 110mm dia item107 11 Each
108 97 Construction of inspection pit inside measurement 450mm x450mm x450mm flush with 100mm diameter HCI/PVC pipes and cement concrete base in proportion 1:3:6 over flat brick soling, 12cm brick wall in cement mortar in proportion 1:4 finished with 13mm cement plaster in proportion 1:2 in side wall and floor. 450mm x450mm air tight C.I. inspection pit cover and frame complete including supplying of materials, necessary excavation of pit as directed. item108 2 Each
109 98 Providing fitting and fixing 450mm dia. 90mm thick C.I. Man hole cover and frame of 58 Kg. weight complete as directed and specified. item109 2 Each
110 99 Supplying and placing ferrocement water tanks of circular/rectengular shape over stagging with manhole cover with locking and clearing arrangement including providing pads of size as required for inlet and outlet pipes complete as directed.(Stagging should be measured and paid separately). \n1000 Lt capacity water tank item110 1 Each
111 100 Supplying fitting and fixing approved uPVC Pipes of different sizes, with all necessary 'R' brand or similar approved P.V.C. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, clamps etc. complete at all levels including below G.L. as directed and specified.\nSUPREME/ PRINCE / SFMC / FUSION BAND or other equvalent approved brand (High presure pipe Sch-40)
112 100.1 (B) Concealed by chieselling or breaking brick wall/ C.C. wall/ R.C.C. wall and making good to the damaged structure.
113 100.2 f)15 mm dia item113 60 Rm.
114 100.3 e)20 mm dia item114 250 Rm.
115 100.4 (A) Exposed or in trenches
116 100.5 d) 25 mm dia item116 110 Rm.
117 100.6 a) 50 mm dia item117 50 Rm.
118 101 Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) \n(II) Jaquare make\n(b)Queen's collection /The Stealth Rangers (For VIP use. Prior approval of Chief Engineer PWD (Bldg) must be taken before use)\nii) C.P. 2-way bibcock double handle with flange Cat No.21017 item118 7 Each
119 102 Supplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately) \n(I) Jaquare make \n(b) Queen's collection/ The Stealth Ranger (For VIP use. Prior approval of Chief Engineer PWD (Bldg) must be taken before use)\n(i) Angular stop cock with wall flange item119 18 Each
120 103 BASIN MIXER\nSupplying, fitting and fixing Chrome Plated (C.P.) basin mixer complete as directed. \n(III) Jaquar make (For VIP use. Prior approval of Chief Engineer PWD (Bldg) must be taken before use)\nviii) 3-Hole basin mixer with popup waste system Cat No.7191 item120 9 Each
121 104 WALL MIXER\nSupplying, fitting and fixing Chrome Plated (C.P.) wall mixer complete as directed. \n(V) Jaquar make \niii) Wall mixer 3 in 1 system with provision for both telephonic shower and overhead shower complete with wall flange with 115mm long bend pipe Cat No.7281 item121 2 Each
122 105 SINK MIXER\nSupplying, fitting and fixing Chrome Plated (C.P.) sink mixer complete as directed. \n(III) Jaquar make \nii) Sink mixer, single hole regular spout (table mounted model) with 450mm long copper pipes and brass nuts.Cat No.7319 item122 1 Each
123 106 SHOWER\nSupplying fitting and fixing overhead adjustable Chrome Plated (C.P.) spray shower 15mm dia. of Sona make with wall flange as directed and specified.(pipes will be measured and paid separately)\n(VI) Grohe make: Bau over head shower with arm 3 adjustable spreys with wall flenge Cat No- 27398000 Grohe make: Bau over head shower with arm 3 adjustable spreys with wall flenge Cat No- 27398000\n(i) Shower arm light casted with wall flange item123 2 Each
124 107 Supplying fitting and fixing Telephonic Chrome Plated (C.P.) shower of approved brand as directed and specified. (Pipes will be measured and paid separately)\nLauret make (Telephonic hand shower with 1.5 m PVC pipe with hook) item124 2 Each
125 108 Supplying and fitting gun metal country pit valve (full way valve) I.S.I. Make as specified and directed.c) 25 mm dia. item125 8 Each
126 109 Supplying and fitting gun metal country pit valve (full way valve) I.S.I. Make as specified and directed.a) 50mm dia item126 12 Each
127 110 SEPTIC TANK\nSupplying and placing ferrocement septic tanks of rectangular shape in to pit with manhole cover with cleaning arrangement over single brick flat soling and 75mm 1:3:6 P.C.C. Baffle wall, inlet and outlet etc are provided at suitable points complete as directed. \n50 Users item127 1 Each
128 111 (D) ULTRAVIOLET (UV) Water Purifiers\nTAURUS make UV water Purifiers with Stainless Steel UV Chamber, Quartz Glass, Imported UV lamp, complete with in-out threaded openings ½” onwards, with 10” Pre filter for dirt, iron, turbid removal. \n(IV)500 liters capacity item128 1 Each
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail