}

Construction Of Garage For Hospital Ambulance , Mobile Blood Bank Van , Mobile Dental Van And Bus , Rims , Imphal, As Per Tender Document-Manipur

Institute Of Medical Sciences-IOMS has published Construction Of Garage For Hospital Ambulance , Mobile Blood Bank Van , Mobile Dental Van And Bus , Rims , Imphal. Submission Date for this Tender is 08-02-2021. Building Work Tenders in As Per Tender Document Manipur. Bidders can get complete Tender details and download the document.




Tender Notice

26804950
Construction Of Garage For Hospital Ambulance , Mobile Blood Bank Van , Mobile Dental Van And Bus , Rims , Imphal
Open Tender
Indian
Manipur
As Per Tender Document
08-02-2021

Tender Details

Construction Of Garage For Hospital Ambulance , Mobile Blood Bank Van , Mobile Dental Van And Bus , Rims , Imphal

Key Value

Document Fees
INR 1000 /-
EMD
INR 116246.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: <Construction of garage for hospital ambulance, mobile blood bank van, mobile dental van and bus, RIMS, Imphal.>
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish lead upto 50 cm and lift upto 1.5 metres item1
2 1.1 Loose/Soft Soil item2 772.66 sqm
3 2 Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms lift upto 1.5 metres including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres item3
4 2.1 a) Loose/Soft Soil item4 138.51 cum
5 3 Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering lead upto 50 metres lift upto 1.5 metre. item5 46.17 cum
6 4 Filling in plinth with sandy soil under floors including watering, ramming, consolidation and dressing complete. item6 360 cum
7 5 Dry boulder pitching in floor item7 117 cum
8 6 Providing and laying cement concrete in foundation and plinth excluding the cost of centering and shuttering item8
9 6.1 i) 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) item9 85.66 cum
10 7 Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : item10
11 7.1 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size). item11 32.15 cum
12 8 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases up to floor five level excluding the cost of centering,shuttering, finishing and reinforcement, with item12
13 8.1 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size). item13 19.24 cum
14 9 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. up to floor five level excluding cost of centering,shuttering, finishing and reinforcement : item14
15 9.1 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size). item15 4.08 cum
16 10 Treatment of soil by boring, filling and compacting granular materials with the following specification i) boring by bailer with casing at required spacing and of required depth and stone column item16 810 Rm
17 11 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete item17
18 11.1 Thermo-Mechanically Treated bars item18 3870.33 kg
19 12 Providing form works i/c centering and shuttering so as to give a rough finish, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 m and removal of the same for in-situ reinforced concrete and plain concrete work in : [Using 12 mm shuttering ply] item19
20 12.1 a) Foundation, footings, bases of columns etc. and mass concrete. item20 32.4 sqm
21 12.2 b) Columns, pillars, posts and struts (square, rectangular or polygon in plan). item21 57.69 sqm
22 12.3 c)Sides or soffits of beams, beam haunchings, cantilevers, girders, bressumers and lintels not exceeding 1m in depth. item22 45.6 sqm
23 13 2nd class (local first class) brick work in foundation and plinth in c. m. 1 : 3 (1 cem : 3 fine sand). item23 26.74 cum
24 14 P/F 1 mm thick M.S. sheet garrage doors with frame of 40 X 40 X 6 mm, angle iron 3.15 mm M.S. gusset plate at the junction of corners with handles, stoppers of locking arrangement etc. i/c applying a priming coat of red lead paint. item24
25 14.1 Using M.S. angles 40 x 40 x 6mm for diagonal braces. item25 55.8 sqm
26 15 75 mm cement concrete flooring 1:2:4 (1 cement: 2 coarse sand:4 stone aggregate 20 mm & down gauge) finished with a floating coat of neat cement. item26 414 sqm
27 16 Steel glazed windows and ventilators of standard rolled steel section joints mitred and welded with 15 x 3 mm lugs 10 cm long with steel plugs embedded in cement concrete block 15 x 10 x 10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 stone aggregate 20 mm nominal size) or wooden plugs and screws of rawl plugs and screws or with fixing clips with bolts and nuts as required including providing and fixing of 4 mm thick glass panes with glazing clips complete including applying a priming coat of approved steel primer excluding cost of metal beadings and other fittings except necessary hinges or pivots as required. item27
28 16.1 Ready made steel windows (side hung) item28 6.75 sqm
29 17 Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a coat of approved steel primer red oxide zinc chrome primer conforming to IS:2074-1979) welded and bolted including special shape washer etc. complete. item29
30 17.1 Electric Resistant Welded tube (Conforming to IS:1611-1979) item30 10999.8 kg
31 18 Trapzoidal Pre-painted Profile Sheet roofing of approved brand DYNA Roof or equivalent with selt drilling screws of 68 mm long Xylon coated screws with PVC washer & caps complete, exclding the coat of purlinsr & trusses. item31
32 18.1 Pre painted Galvalume Sheet (PPGL) item32
33 18.2 i) Profile sheet 0.50 mm/4.2 kgs/sqm item33 783.98 sqm
34 19 Trapzoidal Pre-painted Profile Sheet for Ridges Gutter or Valley 610 mm wide of approved brand DYNA Roof or equivalent fixed with selt drilling screws of 68 mm long Xylon coated screws with PVC washer & caps completed, exclding the coat of purlins rafter & trusses. item34
35 19.1 Pre painted Galvanized Iron Sheet(PPGL) item35
36 19.2 Profile sheet 0.40 mm/3.2 kgs/sqm item36 24.15 Rm
37 20 15 mm cement plaster 1:3 (1cement: 3 fine sand) item37 24.5 sqm
38 21 Painting (two or more coats excluding priming coat) with superior ready mixed paint for steel work of approved quality in all shades on new steel work to give an even shade. item38 472.34 sqm
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail