Public Works Department-PWD has published Annual Repair And Maintenance Of To Delhi Judicial Academy Sec-14 , Dwarka Under Sub Div-Iii Of Swbmd M-121 ( N ) , New Delhi During 2020-21 . ( Sh- Strenthening Of Stone Wall Cladding By Providing Stainless Steel Fastener And Other Misc Works ) .. Submission Date for this Tender is 06-02-2021. Miscellaneous Fasteners Tenders in safdarjung enclave Delhi. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 02-Feb-2021 | change in name of work | Other | 06-02-2021 |
| Name of Work: - A/R & M/O to Delhi Judicial Academy Sec-14, Dwarka under Sub Div-III of SWBMD M-121(N), New Delhi during 2020-21. (SH:- Strenthening of stone wall cladding by providing stainless steel fastener and other misc works). | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. | 11 | cum | |
| 2 | 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size). | 2 | cum | |
| 3 | 3 | 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size). | 4 | cum | |
| 4 | 4 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) | 2 | cum | |
| 5 | 5 | Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : Red sand stone - Exposed face fine dressed with rough backing. 40 mm thick | 25 | sqm | |
| 6 | 6 | Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately). Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble. Area of slab over 0.50 sqm | 10 | sqm | |
| 7 | 7 | Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. i/c required scaffolding, ladder etc. upto all height as per direction of Engineer-in-charge.\nNote: Nothing extra shall be paid for any scaffolding, ladder etc. upto all height. 10 x 160 mm | 7851 | each | |
| 8 | 8 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) | 42 | sqm | |
| 9 | 9 | 15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand) | 42 | sqm | |
| 10 | 10 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | 25 | sqm | |
| 11 | 11 | Providing and laying water proofing treatment by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. | 12 | sqm | |
| 12 | 12 | Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose.(2) The payment will be made once only for execution of all items for such works. | 150 | sqm | |
| 13 | 13 | Providing and fixing manually operated Roller Blinds of vista (Vista screen classic 5% with head rail) non back out series, Aerolox vista, marvle decor or mac make as per manufacture specification in required colour or shades with other connect accessories for fixing and smooth functioning of the blinds as per direction of Engineer-in-charge). Control Unit:- The control unit is made of high strength reinforced plastic. The clutch is of warp spring. High carbon steel springs are provided to transmit motion from driving to driven member of mechanism clutch. Clutch is operated directlonally by the use of endless beaded chain. clutch never need any adjustment. Idler :- Idler is of high strength reinforces plastic, consisting of a center shaft. The idler is mounted on the bracket by using a plastic. Roller Tube:- It is a 32 mm (OD) (depending upon the size) aluminium extruded grooved tube made of alloy T6063 weighing 0.27 Kg/m control unit and idler are fixed to the either ends of the tube. The fabric of the blind is fitted to the tube with heavy duty adhesive tape. Bottom rail:- It is an aluminium extruded rail with groove for fixing the fabric and powder coated in white. It is fixed to the bottom of the fabric in tension and straight. The end caps of the tube are ABS. The Size of rail shall be 21 mm (OD) made of alloy HE 9 WP weighing 0.27 kg/m | 70 | sqm | |
| 14 | 14 | Providing and fixing laminated wooden flooring of Pergo, Vista, Bvg Krono, Kronotex (dynamic) or equivalent make design and shade consisting of interlockable panels of minimum thickness 8 mm having V grooves for interlocking and corresponding to abrasion class AC 3 over a base of 0.20 mm thick polyurethane foam complete as per the directions of Engineer-in-charge. | 10 | sqm | |
| 15 | 15 | Providing and fixing 8 mm thick toughed glass in table top including fixing with screw, beading, polishing etc all complete as per direction of Engineer-in-charge. | 6 | sqm | |
| 16 | 16 | Providing and supplying fibre based planter of size (14 inch x 14 inch x 15 inch) having weight not less than 3.5 kg/piece of approved sample and shape as per requirement of client department and as per direction of Engineer-in-charge. | 200 | each | |
| 17 | 17 | Providing and fixing good qualitity leathrite for uphostery of sofa as per approved sample, shade and design by the client department all complete as per direction of Engineer in charge. | 14 | seat | |
| 18 | 18 | Add CPWD Cost Index @15.69% (On DSR Items) | 1 | each | |
| 19 | 19 | Deduct PWD Cost Index @9.5% (On DSR Items) | 1 | each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
