Water Resources Department-WRD has published Repairs And Maintenance To Canal Cross Regulator Radial Gates Of Size 5.5 X 4.5 Mtr. -14 Nos And C.R.,H.R & Escape Vertical Gates Of Various Size-18 Nos (Total 32 Nos) With Allied Hoist Mechanism By Way Of Inspecting,Dismantling Damaged And Broken Rubber . Submission Date for this Tender is 05-02-2021. Seals Tenders in Aurangabad Maharashtra. Bidders can get complete Tender details and download the document.
Name of Work: OF Repairs and maintenance to Canal Cross Regulator Radial Gates of size 5.5 X 4.5 Mtr. -14 Nos and C.R.,H.R & Escape vertical gates of various size-18 Nos (Total 32 Nos) with allied Hoist Mechanism by way of inspecting,dismantling damaged and broken Rubber seal, wire rope and replacement with new one @ Right Bank Main Canal 0-70 KM Of Upper Penganga Project. Dist Hingoli. Complete job including cost of material, machining, labour, transportation, sundry and labour welfare cess etc. | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Dismantling of C.R & H.R and hoist assembly - 1 No. lifting of the same up-to Platform for Repair work and lowering on Sill Beam. | 1 | ||
2 | 2 | Dismantling of old damaged side rubber seal from gate leaf .Supplying & fitting new "L" Type side rubber seal confirming to IS 11855-1986 and G.I. Bolt with Double Washer of C. R. Gate of size 5.5x4.5 Mtr-1No. | 2 | 32 | Nos |
3 | 3 | Dismantling of old damaged bottom rubber seal from gate leaf. Supplying & fitting new Flat type bottom Rubber Seal confirming to IS 11855-1986 and G.I. Bolt With Double Washer of C. R. Gate of size 5.5x4.5 Mtr-1no | 3 | 14 | Nos |
4 | 4 | Draining out old oil (contaminated, soapy) from RGB 0:600 & Filling with new gear oil GX 90,Cleaning Gear train by removing old Grease and applying M.P.Grease to Gear Train, Pedestal, Drum Axel etc Hoist Parts of 10 T Capacity Rope Drum hoist and Trunion Pin for C. R. Gate of size 5.5x4.5 Mtr- 1 No. | 4 | 14 | Nos |
5 | 5 | Dismantling of old dammaged Wire rope of 10 T Capacity Rope Drum Hoist for Canal Cross Regulator Gate of size 5.5x4.5 Mtr -1 no, Fixing new Wire rope(I.P.G.I. with F.M.C. having 6x36 Regular Lay) in four falls confirming to IS 2266 into Wire Rope Socket Closed End Type Confirming to IS 2485.Applying Cardium Compound (Servo Coat 140) to Wire Rope With Satisfactory test & Trial . | 5 | 14 | Nos |
6 | 6 | Removing Old Cardium Compound of Wire rope by cleaning agent, for 10 Ton cap hoist of size 5.5x4.5 m - 1 No. and applying new Cardium Compound (Servocoat 140) - 10 Kg. | 6 | 6 | Nos |
7 | 7 | Replacement of worn out -24 No Rubber Bushes of R.G.B. Line Shaft Flange coupling a by new one of C.R.Gate 5.5x4.5 m-1No. | 7 | 8 | Nos |
8 | 8 | Dismantling bend line shaft -1 No of 10 ton cap hoist of C.R.Gate 5.5 x 4.5 Mtr -. Straightening Line Shaft by using Hydraulic Press machine and refitting with alignment etc. - 1 No. | 8 | 14 | Nos |
9 | 9 | Providing and Applying Anticorrosive Paint double coat to C.R. radial gate of size 5.5 x 4.5 mtr parts with surface preparation complete job including cost of material and labour.area 215sqm x 14 nos=3010 sqm | 9 | 14 | Nos |
10 | 10 | Manufacturing of Square Threaded Stem rod Dia 50 mm,4.5 mtr long including cost of material and machining etc complete job. | 10 | 3010 | Sqm |
11 | 11 | Manufacturing of C.I wheel with cost of material and machining | 11 | 7 | Nos |
12 | 12 | Manufacturing Stem nut for 5T hoist with cost of material & fabrication | 12 | 2 | Nos |
13 | 13 | Manufacturing Worm Shaft with cost of material & fabrication | 13 | 8 | Nos |
14 | 14 | Manufacturing Bearing Housing for Worm Shaft with cost of material & fabrication | 14 | 3 | Nos |
15 | 15 | Manufacturing Coupling Joint for Worm Shaft with cost of material & fabrication | 15 | 5 | Nos |
16 | 16 | Providing & Fitting of Thrust Bearing No.51217 | 16 | 5 | Nos |
17 | 17 | Bearing No.7208 | 17 | 22 | Nos |
18 | 18 | Repairs to gate leaf and embedment at various RD by removing old damaged brass flat and fitting new one with welding etc complete including cost of material and labour | 18 | 10 | Nos |
19 | 19 | Providing & Fitting of Brass flat for C.R gate size @ RD 13480 mtr | 19 | ||
20 | 20 | Providing & Fitting of Brass flat for C.R gate size @ RD 23900 | 20 | 1 | Nos |
21 | 21 | Providing & Fitting of Brass flat for C.R gate size @ RD 37000 | 21 | 1 | Nos |
22 | 22 | Providing & Fitting of Brass flat for C.R gate size @ RD 56630 | 22 | 1 | Nos |
23 | 23 | Provinding & Fitting of Brass flat for C.R gate size @ RD 66400 | 23 | 1 | Nos |
24 | 24 | Manufacturing of C.I wedges and fitting to gate | 24 | 1 | Nos |
25 | 25 | Providing and Applying Anticorrosive Paint double coat to gate parts with surface preparation | 25 | 20 | Nos |
26 | 26 | 1200x1200 | 26 | ||
27 | 27 | 1200x1500 | 27 | 5 | Nos |
28 | 28 | 1500x1500 | 28 | 6 | Nos |
29 | 29 | 2000x1500 | 29 | 5 | Nos |
30 | 30 | Sundry Material Nut Bolts and washer, bearing grease etc. | 30 | 2 | Nos |
31 | 31 | Cost of site Cleaning for Repair work | 31 | 18 | Nos |
32 | 32 | Mini Mobile workshop charges for Repairs and maintenance to Canal Cross Regulator Radial Gates of size 5.5 X 4.5 Mtr. -14 Nos and C.R.,H.R & Escape vertical gates of various size-50 Nos (Total 64 nos). Hire charges of various equipments in mini mobile workshop | 32 | 20 | Days |
33 | 33 | Brick work in C.M 1:5 mix using 2nd class ground moulded chamber burnt bricks with including cost and conveyance of all materials and including all labour charges etc complete | 33 | 20 | Days |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail