| 1 | 1 | M&L for Removing of plants including roots by dismantling of brick work / PCC / RCC including necessary scaffolding , any type , any location / height ( roof, parapet walls near pipes etc) and spraying the affected area with solution of 25 ml Glyphosphate (4% content) diluted with 1 litre of water or as per manufacturer's instructions after removing roots from wall slabs for preventing the regrowing and making good the disturbed portion with PCC 1:2:4 type B-0 mix using 12.5 mm graded stone aggregate and plaster in CM 1:3 (Size of the disturbed portion 150 X 150 X 150mm) etc complete all as specified and as directed. | | 100 | Each |
|---|
| 2 | 2 | Demolition of Reinforced cement Concrete of any description and in any position not otherwise specifically provided for RCC Tanks, chimneys etc complete all as specified and as directed. | | 5 | Cum |
|---|
| 3 | 3 | Demolition of Brick work or stone / boulder / PCC block masonry, built in cement mortar including all quons, arches, pillars, etc., but excluding ashlar facings, dressed stone-work and precase concrete articles etc complete all as specified and as directed. | | 15 | Cum |
|---|
| 4 | 4 | Demolition and removing of cement concrete or surkhi filling of any description and in any position not otherwise specifically provided etc complete all as specified and as directed. | | 190 | Cum |
|---|
| 5 | 5 | M&L for Brick work with subclass 'B' bricks, straight or curved on plan exc 6.0 mtr mean radius, built in CM (1:6), in damaged parapet, chamber and similar work of any description, complete all as specified and as directed. | | 5 | Cum |
|---|
| 6 | 6 | M&L for pre-cast cement concrete block masonry of type C1 PCC 1:3:6 (using 20 mm graded stone aggregate) with solid blocks exc 10 cm in width and setting in cement mortar 1:4 etc complete all as specified and as directed. | | 10 | Cum |
|---|
| 7 | 7 | M & L for Cement concrete type B-0 PCC 1:2:4 (using 12.5 mm graded stone aggregate) in haunching concrete etc complete all as specified and as directed | | 4 | Cum |
|---|
| 8 | 8 | M&L for Cement concrete type B-1 PCC 1:2:4 (using 20 mm graded stone aggregate) as in padding concerte of average 50 mm thick with using water proofing compound etc complete all as specified and as directed. (NOTE :- WPC will be measured and paid seperately) | | 2150 | Sqm |
|---|
| 9 | 9 | M&L for Rendering 10 mm thick in cm 1 : 4 mixed with water proofing compound as per manufacturers instructions on concrete / brick surfaces and rendering is to be finished even and smooth without using extra cement complete all as directed. (NOTE :- WPC will be measured and paid seperately) | | 2150 | Sqm |
|---|
| 10 | 10 | M&L for Cleaning the roof surfaces and applying oil bound bitumen primer @ 0.20 Kg per Sqm providing and laying 4 mm thick APP modified water proofing membrane weight not less than 4 Kg per Sqm reinforced with non woven polyster matt weight not less 160 gm per Sqm having softening point not less than 140 Degree centgrade, longitudinal tensile strength not less than 800 N per 5 cm teasing strenght of 180 N with minimum of 10 cm side laps and 15 cm end laps by application of torch. Applying a coat of blown grade hot bitumen over the membrane @ 1.20 kg / sqm as per manufacturer instructions complete all as specified and as directed | | 2150 | Sqm |
|---|
| 11 | 11 | M&L for 20 mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor tiles etc etc complete all as specified and as directed. | | 500 | Sqm |
|---|
| 12 | 12 | S&F cement concrete tiles of size 20-30 cm X 20-30 cm X 20 mm thick machine pressed set jointed and pointed in neat grey cement slurry as in floors etc complete all as specified and as directed. | | 500 | Sqm |
|---|
| 13 | 13 | M&L for applying one coat of solar reflective bituminous aluminium paint over a surfaces of APP water proofing membrane @ 0.1 Kg / Sqm complete all as specified and as directed. | | 1650 | Sqm |
|---|
| 14 | 14 | M&L for cleaning of surfaces thoroughly from dust projection and dirt by wire brushing and applying a coat of blown bitumen 85 / 25 @ 1.2 kg / sqm over a coat of bituminous primer over old existing APP membrane surfaces and in entrances of rain water pipes, over AC sheets etc, complete all as specified and as directed | | 200 | Sqm |
|---|
| 15 | 15 | M & L for Cleaning and sweeping the roof surfaces and spouts with brooms including removal of vegetation / shurbs over roofs, parapets and chajjas of inaccesible areas and making good the damaged parapets / chajjas and roofs in cement concrete PCC 1:2:4 of thickness not more than 25 mm as per requirement at site and removal of debris exceeding 500 mtr but not. exceeding 2.5 km in distance complete all as specified and as directed. | | 50 | Sqm |
|---|
| 16 | 16 | Taking down cement plaster on brick or stone walls,etc in sides of sunken portions., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed | | 505 | Sqm |
|---|
| 17 | 17 | M & L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces at any height with neccesary scafoldings, and rendering is to be finished even and smooth without using extra cement complete all as specified and as directed. | | 50 | Sqm |
|---|
| 18 | 18 | M & L for rendering 15 mm thick cement mortar 1:4 with WPC on fair faces of brick work or concrete surfaces at any height with neccesary scafoldings and rendering is to be finished even and smooth without using extra cement complete all as specified and as directed. (NOTE :- WPC will be measured and paid seperately) | | 300 | Sqm |
|---|
| 19 | 19 | M & L for rendering 10 mm thick in cement mortar 1:4 on ceilings and soffits of stair case waist slab of concrete surfaces at any height with neccesary scafoldings and rendering is to be finished even and smooth without using extra cement complete all as specified and as directed. | | 50 | Sqm |
|---|
| 20 | 20 | M & L for Raking out joints / pointing to random rubble or polygonal rubble uncoursed or brought up to courses in cement or cement lime mortar and providing raised pointing to random or polygonal rubble, uncoursed or brought upto courses in old stone wall surfaces of any description, with necessary scaffoldings by using cement mortar 1:4 complete all as specified and as directed. | | 10 | X Sqm |
|---|
| 21 | 21 | M&L for preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer, etc complete all as specified and as directed. | | 50 | Sqm |
|---|
| 22 | 22 | M & L for preparation of new plastered surfaces on walls and apply two coats of white wash complete all as specified and as directed. | | 75 | Sqm |
|---|
| 23 | 23 | M&L for preparing newly plastered surfaces of walls and applying two coats of cement based paint over a coat of cement base primer etc complete all as specified and as directed. | | 225 | Sqm |
|---|
| 24 | 24 | M & L for preparation of new plastered ceiling surfaces and applying two coats of white wash complete all as specified and as directed. | | 50 | Sqm |
|---|
| 25 | 25 | M&L for 25 mm thick PCC 1:2:4 type B-0 mix (using 12.5 mm graded stone aggregate) mixing with WPC as in bedding in sunken portions with smooth finish etc complete all as specified and directed.(NOTE :- WPC will be measured and paid separatly). | | 45 | Sqm |
|---|
| 26 | 26 | M & L for rendering 15 mm thick on brick or concrete surfaces in CM (1:4), mixing with water proofing admixture as per manufacture's instruction as in sunken portion complete all as specified and directed. (NOTE :- WPC will be measured and paid separatly). | | 105 | Sqm |
|---|
| 27 | 27 | M&L for cleaning of surface thoroughly from dust projection and dirt by wire brushing and applying a coat of blown bitumen 85 / 25 @ 1.2 kg / sqm over a coat of bituminous primer and ove that laying water proofing treatment of APP based polymeric membrane minimum 3 mm thick and weight 3 kg / sqm reinforced with polyster non wooven fabric weight not less than 150 gm / sqm laid by forced application in sunken portion complete all as specified and as directed | | 105 | Sqm |
|---|
| 28 | 28 | Supply only integral water proofing compound complete all as specified and as directed | | 700 | Kg |
|---|
| 29 | 29 | M & L for PCC 1:5:10 type E-2 mix using 40 mm graded brick aggregate as in filling of sunken portion etc complete all as specified and as directed. . | | 18 | Cum |
|---|
| 30 | 30 | S&F in repairs 40 mm High density polyethylene pipes (HDPE) of pressure rating 6 kgf / sqcm in spouts as in sunken floors or in simillar work etc complete all as specified and as directed. | | 5 | RM |
|---|
| 31 | 31 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) etc complete all as specified and as directed. | | 220 | Sqm |
|---|
| 32 | 32 | M&L for 15 mm thick screed bed or bedding layer of cement mortor 1:6 for laying floor finishes etc complete all as specified and as directed. | | 60 | Sqm |
|---|
| 33 | 33 | S&F joint free non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed. | | 60 | Sqm |
|---|
| 34 | 34 | M&L for rendering 10 mm thick C:M 1:4 on concrete surfaces or walls to receive backing of wall tiling etc complete all as specified and as directed. | | 160 | Sqm |
|---|
| 35 | 35 | S&F Joint free Glazed ceramic colour tiles in vertical surfaces 350 x 250 x 7 to 8 mm / 450 X 350 X 7 to 8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as specified and as directed. | | 160 | Sqm |
|---|
| 36 | 36 | M&L for Roughening the surfaces of old concrete floors by picking, hacking for keys, sweeping clean and washing down with water to remove dust etc. for preparation for tiling work complete all as specified and as directed | | 100 | Sqm |
|---|
| 37 | 37 | M&L for spreading of Cera Bond Chemical at 6.00 Kg per Sqm for fixing of floor tiles complete all as specified and as directed | | 100 | Sqm |
|---|
| 38 | 38 | M & L for Vitrified ceramic tiles 10 mm thick, light / dark coloured area of each tile not exceeding 0.36 sqm as in floors and in skirting, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match in floors etc complete all as specified and as directed | | 100 | Sqm |
|---|
| 39 | 39 | M&L for Granite (of any type) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigments to match the shade of granite stone including rubbing and polishing and provinde hole to Granite for gas pipe, laid over 20 mm thick Screed bed in CM 1:6 etc complete all as specified and as directed | | 7 | Sqm |
|---|
| 40 | 40 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed | | 15 | RM |
|---|
| 41 | 41 | Taking up or down GI tubing of 15 mm bore and connections etc complete all as specified and as directed. | | 150 | RM |
|---|
| 42 | 42 | Taking up or down GI tubing of 20 mm bore and connections etc complete all as specified and as directed. | | 200 | RM |
|---|
| 43 | 43 | Taking up or down GI tubing of 25 mm bore and connections etc complete all as specified and as directed. | | 30 | RM |
|---|
| 44 | 44 | S & F GI tubes of 15 mm dia medium grade with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed. | | 150 | RM |
|---|
| 45 | 45 | S & F GI tubes of 20 mm dia medium grade with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed. | | 200 | RM |
|---|
| 46 | 46 | S & F GI tubes of 25 mm dia medium grade with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed. | | 30 | RM |
|---|
| 47 | 47 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal (measured overall as fixed along the centre line over fitting and accessories) etc complete all as specified and as directed. | | 180 | RM |
|---|
| 48 | 48 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110 mm bore including fixing with PVC clamps etc complete all as specified and as directed. | | 130 | RM |
|---|
| 49 | 49 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 75 mm bore including fixing with PVC clamps etc complete all as specified and as directed. | | 50 | RM |
|---|
| 50 | 50 | S&F PVC (SWR) bends any radius 110 mm bore etc complete all as specified and as directed. | | 10 | Each |
|---|
| 51 | 51 | S&F PVC (SWR) bends any radius 75 mm bore etc complete all as specified and as directed. | | 8 | Each |
|---|
| 52 | 52 | S&F PVC (SWR) branch piece, 110 mm bore single (single 'Y') equal or unequal etc complete all as specified and as directed. | | 5 | Each |
|---|
| 53 | 53 | S&F PVC (SWR) branch piece, 110 mm bore Double (double 'Y') equal or unequal etc complete all as specified and as directed. | | 5 | Each |
|---|
| 54 | 54 | S&F PVC (SWR) reducers 110 mm bore etc complete all as specified and as directed. | | 5 | Each |
|---|
| 55 | 55 | S&F PVC (SWR) 'P’ trap110 mm bore etc complete all as specified and as directed. | | 2 | Each |
|---|
| 56 | 56 | S&F PVC (SWR) 'S' trap 110 mm bore etc complete all as specified and as directed. | | 2 | Each |
|---|
| 57 | 57 | S&F in repairs 75 mm dia PVC (SWR) floor / nahani trap plain with grating including jointing with solvent cement and jointing to waste pipe fixed in cement concrete type B-1 (PCC 1:2:4) etc complete all as specified and as directed. | | 5 | Each |
|---|
| 58 | 58 | Disconnecting existing tanks setting aside and hoisting of PVC water tank of capacity exc 250 but not exc 500 ltrs including cleaning and removing all scale and dirt, etc from tanks , required reconnecting with necessary GI fittings as per site requirements and re- fixing in same position and also writting date of cleaning and due date of cleaning using enamel paint etc complete all as specified and as directed. | | 32 | Each |
|---|
| 59 | 59 | Disconnecting existing tanks setting aside and hoisting of PVC water tank of capacity exc 500 but not exc 1000 ltrs including cleaning and removing all scale and dirt, etc from tanks , required reconnecting with necessary GI fittings as per site requirements and re- fixing in same position and also writting date of cleaning and due date of cleaning using enamel paint etc complete all as specified and as directed. | | 30 | Each |
|---|
| 60 | 60 | S & F 500 ltrs capacity Rotational moulded polyethylene water storage tanks with cover (cylindrical vertical with closed top) hoisted and fixed in position including dismantling existing tanks of capacity 500 litres etc complete all as specified in SSR Part- I and as directed. | | 15 | Each |
|---|
| 61 | 61 | S & F of 1000 ltrs capacity Rotational moulded polyethylene water storage tanks with cover (cylindrical vertical with closed top) hoisted and fixed in position including dismantling existing tanks of capacity 1000 litres etc complete all as specified in SSR Part - I and as directed. | | 9 | Each |
|---|
| 62 | 62 | S&F in repairs Gun-metal globe or gate valves 20 mm bore with iron wheel head, screwed both ends for iron pipes etc complete all as specified and as directed. | | 20 | Each |
|---|
| 63 | 63 | S&F in repair of Gun-metal globe or gate valves 25 mm bore dia with iron wheel head, screwed both ends for iron pipes etc complete all as specified and as directed. | | 10 | Each |
|---|
| 64 | 64 | S&F in repairs of Vitreous china squattig pan, Orissa pattern of size 580 x 440 mm,white with integral foot rest including connection to trap and to flushing pipe, anti-syphonage pipe, and with P or S trap, including making good to floor complete all as specified and directed. | | 15 | Each |
|---|
| 65 | 65 | S&F in repairs of Vitreous China wash down water closet pan (Pedestal pattern), white including connection to drain and to flushing pipe, and plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device etc complete all as specified and as directed. | | 10 | Each |
|---|
| 66 | 66 | S&F in repairs Plastic water closet seat cover, white, closed pattern with flat bottom. and cover and mild steel chromium plated or aluminium hinged device etc complete all as specified and as directed. | | 50 | Each |
|---|
| 67 | 67 | S&F in repairs PVC valveless, syphonic action type, flushing cistern, low level, 10 ltr capacity, white, with inlet, ball valve, float and handle including brackets and long flush band etc complete all as specified and directed. | | 40 | Each |
|---|
| 68 | 68 | S&F in repairs PVC connection 15 mm size with brass CP nuts of length 450 mm complete all as specified and as directed. | | 100 | Each |
|---|
| 69 | 69 | S&F in repairs Vitreous china wash basin, white flat back, size 550 mm x 400 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets etc complete all as specified and as directed. | | 10 | Each |
|---|
| 70 | 70 | S&F in repairs Waste coupling of 32 mm size chromium plated for glazed ware basins with long screwed shanks and fly-nuts etc complete all as specified and as directed. | | 20 | Each |
|---|
| 71 | 71 | S&F in repairs fancy type Bib taps standard of PTMT 15 mm dia high pressure screwed for iron pipe and fixed. (Minimum weight 15 mm- 105 gms) complete all as specified and as directed. | | 90 | Each |
|---|
| 72 | 72 | S&F in repairs CP Bib taps 15 mm bore cast copper alloy with capstan head fancy type screwed down screwed for iron pipe or for brass ferrule etc complete all as specified and as directed. | | 100 | Each |
|---|
| 73 | 73 | S&Fin repairs CP Bib taps two way, 15 mm cast copper alloy fancy type with capstan head screwed down screwed for iron pipe or for brass ferrule etc complete all as specified and as directed. | | 10 | Each |
|---|
| 74 | 74 | S&F in repairs of ABS body CP health faucet complete set including holder stand and one metre PVC pipe, 15 mm cast copper alloy screwed down screwed for iron pipe or for brass ferrule etc complete all as specified and as directed. (Make :- CERA Cat Part No 8030101 or equivalent approved make) | | 30 | Each |
|---|
| 75 | 75 | S&F in repairs Gun of health faucet ABS body, CP to be replaced to exixting health faucet etc complete all as specified and as directed. | | 30 | Each |
|---|
| 76 | 76 | S&F in repairs of holder stand of health faucet ABS body, CP to be replaced to exixting holder stand of health faucet etc complete all as specified and as directed. | | 30 | Each |
|---|
| 77 | 77 | S&F in repairs Angle cock of 15 mm dia cast copper alloy with capstan head fancy type chromium plated etc complete all as specified and as directed. | | 20 | Each |
|---|
| 78 | 78 | S&F in repairs stop valves 15 mm dia cast copper alloy fancy type CP and capstan heads screwed down high pressure screwed both ends for iron pipe or for unions, etc complete all as specified as and directed. | | 15 | Each |
|---|
| 79 | 79 | S&F in repairs concealed stop valves 15 mm dia cast copper alloy fancy type CP with long shank and cup and capstan heads screwed down high pressure screwed both ends for iron pipe or for unions, etc complete all as specified and as directed. | | 10 | Each |
|---|
| 80 | 80 | S&F in repairs Ball valves 20 mm dia high pressure PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (Minimum wt. 210 gms) etc complete all as specified and as directed. | | 100 | Each |
|---|
| 81 | 81 | S&F in repairs Ball valves 25 mm dia high pressure PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (Minimum wt. 455 gms) etc complete all as specified and as directed. | | 30 | Each |
|---|
| 82 | 82 | S&F in repairs ABS chromium plated shower rose LONG ARM with or without swivel joints any size including fixing to steel pipe or union, of size 125 mm complete all as specified and as directed. | | 20 | Each |
|---|
| 83 | 83 | S&F in repairs Lids for Rotational moulded PVC water storage tank of 250 to 2000 ltrs capacity fixed in position all as specified in SSR part – I. complete all as specified and as directed. | | 200 | Each |
|---|
| 84 | 84 | S&F in repairs Nipple / flange 20 mm suitable for HDPE water tank (Minimum weight 45 gms) complete all as specified and as directed. | | 20 | Each |
|---|
| 85 | 85 | S&F in repairs Nipple / flange 25 mm suitable for HDPE water tank (Minimum weight 65 gms) complete all as specified and as directed. | | 20 | Each |
|---|
| 86 | 86 | S&F in repairs Brass CP mixer 'hot' and cold water screwed down for iron pipe etc complete all as specified and as directed. | | 2 | Each |
|---|
| 87 | 87 | S&F in repairs Pillar taps 15 mm dia, cast copper alloy, Long nose , chromium plated fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and capston head, screwed for iron pipe of 15 mm bore etc complete all as specified and as directed. \n | | 40 | Each |
|---|
| 88 | 88 | S & F in repairs PVC waste pipe 32 mm bore, 900 mm long etc complete all as specified and as directed. | | 300 | Each |
|---|
| 89 | 89 | S&F in repairs brass chromium plated towel rail 600 mm long \"D\" type fixed with suitable steel screws etc complete all as specified and as directed. | | 30 | Each |
|---|
| 90 | 90 | S&F in repairs towel ring 150 mm dia type ABS body chromium plated fixed with and including Chromium plated brass screws complete all as specified and as directed. | | 10 | Each |
|---|
| 91 | 91 | S&F in repairs Soap dish, stainless steel and fixed to walls complete all as specified and directed. | | 10 | Each |
|---|
| 92 | 92 | S&F in repairs toilet paper holder ABS body chromium plated box type complete all as specified and as directed. | | 10 | Each |
|---|
| 93 | 93 | S & F in repairs Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated brackets guard and railing 60 cm long complete all as specified and as directed. | | 10 | Each |
|---|
| 94 | 94 | S & F in repairs 600 mm x 450 mm bevelled adge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial ply wood and fixed with wooden plugs with CP catch nuts etc complete all as specified and as directed. | | 20 | Each |
|---|
| 95 | 95 | S&F in repair stainless steel gratings fancy type 100 mm dia, hinge or openable type, fixed with suitable solvent cement etc complete all as specified and as directed. | | 100 | Each |
|---|
| 96 | 96 | S&F in repairs sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x160 mm etc complete all as specified and as directed. | | 10 | Each |
|---|
| 97 | 97 | Taking down and refixing of existing stainless steel sink of any size, after repairing with plugs, washers, waste coupling and waste pipe including cast iron cantilever brackets and connecting to union / pipe complete all as specified and as directed. | | 10 | Each |
|---|
| 98 | 98 | S&F in repairs cast iron floor trap 100 mm dia with grating including jointing to waste pipe fixed in cement concrete type B - 1 (PCC 1:2:4) etc complete all as specified and as directed. | | 5 | Each |
|---|
| 99 | 99 | S&F in repairs cast iron Nahani trap 100 mm dia with grating including jointing to waste pipe fixed in cement concrete type B - 1 (PCC 1:2:4) etc complete all as specified and as directed. | | 5 | Each |
|---|
| 100 | 100 | M & L for Cleaning and removing all scales and dirt, etc, from tanks or from mouths of circulating pipes, etc not exc 250 ltrs capacity and write date of cleaning and due date of cleaning on OHT complete complete all as specified and as directed. | | 10 | Each |
|---|
| 101 | 101 | M&L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc exc 250 but not exc 500 ltrs capacity and write date of cleaning and due date of cleaning on OHT complete all as specified and as directed. | | 50 | Each |
|---|
| 102 | 102 | M&L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc exc 500 but not exc 1000 ltrs capacity and write date of cleaning and due date of cleaning on OHT complete all as specified and as directed. | | 50 | Each |
|---|
| 103 | 103 | M&L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc exc 1000 but not exc 2000 ltrs capacity and write date of cleaning and due date of cleaning on OHT complete all as specified and as directed. | | 10 | Each |
|---|
| 104 | 104 | S&F in repairs glass corner / mirror shelves size 300 / 450 mm of each fixed with necessary screws, bolts , and supporting L type angles with drilling in walls complete all as specified and as directed. | | 10 | Each |
|---|
| 105 | 105 | S&F in repairs PVC Cabinet of size 600 mm x 450 mm with necessary fittings and hinges complete all as specified and as directed. | | 10 | Each |
|---|
| 106 | 106 | S&F Stainless Steel Dish / plate Display Rack of size 750 mm x 600 mm x 250 mm, made with 0.63mm thick stainless steel sheet, fixed to walls with rawal plugs amd brass screws at suitable places, etc complete all as specified and as directed. (Make:- Prayag or Silver shine or any equivalent make as approved by GE) | | 5 | Each |
|---|
| 107 | 107 | Description All as per Ser Item No: 106 above but size 900 mm x 750 mm x 250 mm, etc complete all as specified and as directed | | 5 | Each |
|---|
| 108 | 108 | Taking down chowkats or frames with shutters (without taking off shutters from frames) not exc 1.5 Sqm each complete all as specified and as directed. | | 45 | Each |
|---|
| 109 | 109 | Taking down chowkats or frames with shutters (without taking off shutters from frames) exc 1.5 Sqm but not exc 4 Sqm each complete all as specified and as directed. | | 40 | Each |
|---|
| 110 | 110 | Taking down shutters of any description area exc 1.0 sqm but not exc 2 sqm each complete all as specified and as directed. | | 40 | Each |
|---|
| 111 | 111 | Taking down shutters of any description exc 1.0 sqm but not exc 2.0 sqm and refixing the same in same openings after repairing, complete all as specified and as directed | | 100 | Each |
|---|
| 112 | 112 | Hacking out old broken glass (any thickness, size, quality or description) from wooden / metal frames including punching or drilling out old glazing pins / spring clips complete all as directed. | | 50 | Sqm |
|---|
| 113 | 113 | S&F 3 mm thick Sheet glass, ordinary quality, in squares not exc 0.5 sqm in each pane and glazing with oil putty and glazing clips in metal / wooden frames and second class hard wood beading in wooden frames complete all as specified and as directed. | | 40 | Sqm |
|---|
| 114 | 114 | S&F 3 mm thick figured glass, pin headed type, in squares not exc 0.5 sqm in each pane and glazing with oil putty and glazing clip in metal / wooden frames and second class hard wood beading in wooden frames complete all as specified and as directed. | | 10 | Sqm |
|---|
| 115 | 115 | S & F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and as directed. | | 1 | Cum |
|---|
| 116 | 116 | S & F 35 mm thick factory made flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete all as specified and as directed. | | 40 | Sqm |
|---|
| 117 | 117 | S & F 35 mm thick Plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm thick B.W.P commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces. The size of rail and style as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated etc complete all as specified and as directed. | | 20 | Sqm |
|---|
| 118 | 118 | Supply and fix 35 mm thick factory made second class hard wood glazed / gauzed and skeleton door shutters , open rebated and prepared to receive glass, gauze, mesh etc with sash bars divided into squares with plain chamfered or rounded mitred beads for securing glass , gauge etc, size of members of shutters as specified in SSR Part - I Section 8, clause 8.20 and fixed to chowkats complete all as specified and as directed.\n\n | | 60 | Sqm |
|---|
| 119 | 119 | S & F 35 mm thick (windows / ventilators) second class hardwood glazed and skeleton shutters divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers and prepared to receive glass, gauze, etc., edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze, etc complete all as specified and as directed. (NOTE :- windows and ventilators are provided with stiles and rails as specified in SSR Part -I) | | 20 | Sqm |
|---|
| 120 | 120 | Supply only Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples, etc complete all as specified and as directed | | 60 | Sqm |
|---|
| 121 | 121 | S&F in repairs, Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples, etc complete all as specified and as directed | | 200 | Sqm |
|---|
| 122 | 122 | S&F steel windows with side hung double shutters for fixing glass and wire mesh on either shutters, projecting type hinges with steel handles peg stays, complete with glazing bars complete all as specified and as directed | | 15 | Sqm |
|---|
| 123 | 123 | S&F steel ventilators with top hung shutters including hinges with steel peg stay, complete with glazing bars complete all as specified and as directed | | 5 | Sqm |
|---|
| 124 | 124 | S&F mild steel framed work such as grills and framed guard bars for windows / ventilators with ends of bars shouldered and / or riveted, or forget into spikes etc and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed | | 150 | Kg |
|---|
| 125 | 125 | S&F Solid PVC frame (Single Rebated) of size 60 mm x 30 mm made out of solid PVC foam with homogeneous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawings. (Note:- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) | | 100 | RM |
|---|
| 126 | 126 | S&F Factory made solid PVC profiled panel door shutter 28 mm thick with integral skin as frame and 3 mm thick high pressure compact laminate on both sides of approved colour as infill, with 'C' type GI or 40 x 20 x 19 of MS pipe as stiffner , supplying and fixing in frame at site as per specifications and drawings etc complete all as specified and as directed | | 40 | Sqm |
|---|
| 127 | 127 | M & L for providing cement concrete PCC 1:2:4 type B-1 mix using 20 mm graded stone aggregate as in bed blocks or hold fasts etc complete all as specified and as directed. | | 0.5 | Cum |
|---|
| 128 | 128 | Supply and fix butt hinges 100 mm size, medium weight cold rolled mild steel and fixed etc complete all as specified and as directed. | | 225 | Each |
|---|
| 129 | 129 | Supply and fix butt hinges of 75 mm size, medium weight cold rolled mild steel and fixed etc complete all as specified and as directed. | | 60 | Each |
|---|
| 130 | 130 | Supply and fix butt hinges of 100 mm size, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type C-21 complete all as specified and as directed. | | 90 | Each |
|---|
| 131 | 131 | Supply and fix 150 mm long extruded aluminium alloy handles, cast type anodised complete all as specified and as directed. | | 210 | Each |
|---|
| 132 | 132 | Supply and fix 100 mm long extruded aluminium alloy handles, cast type anodised complete all as specified and as directed. | | 30 | Each |
|---|
| 133 | 133 | Supply and fix tower bolt 150 mm long extruded aluminium anodised complete all as specified and as directed. | | 210 | Each |
|---|
| 134 | 134 | Supply and fix tower bolt 100 mm long, extruded aluminium anodised complete all as specified and as directed. | | 30 | Each |
|---|
| 135 | 135 | Supply and fix 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed. | | 60 | Each |
|---|
| 136 | 136 | Supply and fix 300 mm long mild steel ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and as directed. | | 45 | Each |
|---|
| 137 | 137 | S&F in repairs Aluminium anodised,barrel tower bolts of extruded section of size 150 mm long complete all as specified and as directed.. | | 20 | Each |
|---|
| 138 | 138 | S&F in repairs Aluminium anodised,barrel tower bolts of extruded section of size 200 mm long complete all as specified and as directed. | | 20 | Each |
|---|
| 139 | 139 | S&F in repairs 125 mm long Hasp and staple, safty type, aluminium hinge pin including bolt to hinge plate and fixed with screws etc complete all as specified and as directed. | | 20 | Each |
|---|
| 140 | 140 | S & F in repairs Door closer, hydraulically regulated, aluminium body designation No 2 universal type (ISI marked), suitable for shutters of weight between 36 to 60 Kg and fixed complete all as specified and as directed. | | 10 | Each |
|---|
| 141 | 141 | S&F 50 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed. | | 60 | Each |
|---|
| 142 | 142 | S & F Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours; articles not exc 200 cu. cm each complete all as specified and as directed. | | 60 | Each |
|---|
| 143 | 143 | S&F in repair Double action floor door spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. | | 2 | Each |
|---|
| 144 | 144 | M&L for preparation applying two coats of synthetic enamel paint over a coat of pink primer on new wood and wood based surfaces of any description, not otherwise described over 10 cm width or girth complete all as specified and as directed. | | 300 | Sqm |
|---|
| 145 | 145 | M&L for preparation and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on newly treated steel surfaces of any description, not otherwise described over 10 cm width or girth complete all as specified and as directed. | | 50 | Sqm |
|---|
| 146 | 146 | M&L for Repairs to rolling shutters of any type by greasing, operating for easy movment to safety levers, chain, wheel and ball bearings and replacement of clips and functional for smoothly closing and opening of any description etc each shutter exc 9.0 sq mtr but not exceeding 12.0 sq mtr complete all as specified and as directed | | 10 | Each |
|---|
| 147 | 147 | S&F in repairs, Rubber beading 6 mm thick 50 mm wide at the bottom of door / window to fill the gap complete all as specified and as directed | | 400 | RM |
|---|
| 148 | 148 | M&L for Running welding in repair thickness of metal not exc 6 mm complete all as specified and as directed. | | 10 | X CM |
|---|
| 149 | 149 | Resecuring or easing and adjusting shutters without taking of shutters from the frame of any description and in any size or position etc complete all as specified and as directed. | | 90 | Per Leaf |
|---|
| 150 | 150 | Dismantling boarding, shelves, partitions of any description, fixed in any position with nails, screws, clamps, etc complete all as specified and as directed. | | 20 | Sqm |
|---|
| 151 | 151 | S&F 18 mm thick Marine plywood of First Grade , fixed with screws as in cupboards, sides of shelves, partitions and in simillar works etc complete all as specified and as directed.. | | 50 | Sqm |
|---|
| 152 | 152 | S&F 12 mm thick Marine plywood of First Grade , fixed with screws as in cupboards, sides of shelves, partitions and in simillar works etc complete all as specified and as directed.. | | 20 | Sqm |
|---|
| 153 | 153 | S&F 0.9 mm thick Decorative laminated sheet type 1 of surface finish coloured and pattern as approved and fixed over plywood with approved adhesive complete all as specified and as directed.. | | 9 | Sqm |
|---|
| 154 | 154 | S&F brass Locks for cupboards, grade I, size 50 mm, 4 levers with 2 keys complete all as specified and as directed.. | | 10 | Each |
|---|
| 155 | 155 | S&F Continuous (piano) hinges, brass width of flap 30 mm bright finish or electrogalvanised complete all as specified and as directed.. | | 30 | RM |
|---|
| 156 | 156 | S&F 100 mm long extruded aluminium alloy handles, cast type anodised complete all as specified and as directed. | | 20 | Each |
|---|
| 157 | 157 | S&F tower bolts 100 mm long, extruded aluminium anodised complete all as specified and as directed. | | 20 | Each |
|---|
| 158 | 158 | S&F in repairs brass chromium plated tubular curtain rails 20 mm dia etc complete all as specified and as directed | | 200 | RM |
|---|
| 159 | 159 | S&F in repairs 20 mm dia fancy type brass chromium plated curtain end finials, etc complete all as specified and as directed | | 100 | Per Pair |
|---|
| 160 | 160 | S&F in repairs brass chromium plated brackets for curtain rails, etc complete all as specified and as directed | | 100 | Per Pair |
|---|
| 161 | 161 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / slabs / blankets, any thickness, including cover fillets complete all as directed | | 40 | Sqm |
|---|
| 162 | 162 | M&L for Providing and fixing in true horizontal level false ceiling grid system manufactured by M/S Armstrong world industries using hot dipped galvanised steel section exposed surface chemically cleaned capping, prefinished in baked polyester paint, main Tee of size 3000 x 32 x 15mm at every 1200 mm c/c, max and 1200 mm cross Tee of size 200 x 32 x 15 mm at every 6000 mm c/c, max and 6000 mm cross Tee of size 600 x 32 x 15 mm at every 600 mm c/c max and 3000 x 19 x 19 mm wall angle all around the wall to form grid size of 600 mm x 600 mm and suspending the grid using 2 mm dia pro-straightened GI wire and 6 mm nylon raw plug at every 1299 mm intervals at the main Tee and laying armstrong ultima RH99 micro look manufacture by Armstrong World Industries complete all as specified and as directed. | | 40 | Sqm |
|---|
| 163 | 163 | S&F in repairs False ceiling boards of size 600 mm x 600 mm, ultima RH99 micro look manufactured by Armstrong World Industries complete all as specified and as directed. | | 20 | Sqm |
|---|
| 164 | 164 | Cutting chases, pinning in brick / stone walls not exc 10 cm girth for concealed water tubing and making good to facings where required and plastering / pointing in cement mortar 1:3 etc complete all as specified and as directed. | | 100 | RM |
|---|
