Asansol Durgapur Development Authority -ADDA has published Construction Of Shed For Garveyard At Budha , Ward No 49 Under Amc . . Submission Date for this Tender is 02-03-2021. Shed Construction Tenders in ADDA OFFICE ASANSOL West Bengal. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 09-Feb-2021 | DATE02022021 | Date | 12-02-2021 |
2 | 13-Feb-2021 | DATE | Date | 20-02-2021 |
3 | 20-Feb-2021 | DATE123456 | Date | 02-03-2021 |
Name of Work: "Construction of Shed for Garveyard at Budha , ward no:- 49 under AMC." | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Earthwork in excavation of foundation trenches or drains in all sorts of soil (including mixed soil but excluding laterite or sand stone ) including removing spreading or stacking the spoils within a lead of 75 metre as per direction.The items includes necessary trimming the sides of trenches, levelling , dressing & ramming the bottom , bailing out water as required complete. | BI01010001010000000000000515BI0100001143 | ||
2 | 1.1 | Depth of excavation not exceeding 1500 mm | BI01010001010000000000000515BI0100001144 | 56 | cum |
3 | 2 | Earth work in filling in foundation trenches or plinth with goode earth , in layers not exceeding 150 mm. Including watering and ramming etc. layer by layer, complete. | BI01010001010000000000000515BI0100001145 | ||
4 | 2.1 | With earth obtained from excavation of foundation. | BI01010001010000000000000515BI0100001146 | 17 | cum |
5 | 3 | Flling in foundation or plinth by fine sand in layers not exceeding 150 mm as directed and consolidating same by through saturation with water and ramming complete including cost of sand. | BI01010001010000000000000515BI0100001147 | ||
6 | 3.1 | By Fine sand . | BI01010001010000000000000515BI0100001148 | 47 | cum |
7 | 4 | Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand . | BI01010001010000000000000515BI0100001149 | 161 | sqm |
8 | 5 | Ordinary Cement concrete [mix 1:2:4]with graded stone chips (20 mm down) excluding shuttering and reinforcement, If any as per IS 456 - 2000. With Panchami variety. | BI01010001010000000000000515BI0100001150 | 18 | cum |
9 | 6 | Brick work with 1st class bricks in cement mortar (1:6) | BI01010001010000000000000515BI0100001151 | ||
10 | 6.1 | In foundation and plinth | BI01010001010000000000000515BI0100001152 | 14 | cum |
11 | 6.2 | In superstructure / Ground floor | BI01010001010000000000000515BI0100001153 | 11 | cum |
12 | 7 | Controlled cement concrete with well graded stone chips ((20 mm graded nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS 456 & relevant special publication, submission of job mix formula after preliminirory mix design after testing of concrete cube as per direction of EIC. Consumption of cement will not be less than 300 Kg of cement with with super plasticiser per cum of controlled concrete but actual consumption will be determined on the basis of preliminary test & job mix formula . | BI01010001010000000000000515BI0100001154 | ||
13 | 7.1 | In Ground Floor & foundation with Concrete mixture [ M20 Grade] | BI01010001010000000000000515BI0100001155 | 15 | cum |
14 | 8 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with rewuired bracing for concrete slabs, beams, columns, lintels, curved or straight including fitting , fixing and stricking out after completion of works. | BI01010001010000000000000515BI0100001156 | ||
15 | 8.1 | 25 mm to 30 mm wooden shuttering | BI01010001010000000000000515BI0100001157 | ||
16 | 8.2 | Upto Ground floor roof level | BI01010001010000000000000515BI0100001158 | 71 | sqm |
17 | 8.3 | 25 mm to 30 mm shuttering without staging in foundation etc. | BI01010001010000000000000515BI0100001159 | 112 | sqm |
18 | 9 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, strips binders etc. including supplying of roads, initial straightening and removal of loose rust (if necessary) cutting to requisite length hooking and bending etc. complete as per drawing and direction. | BI01010001010000000000000515BI0100001160 | ||
19 | 9.1 | For M.S. / Tor steel.[SAIL / TATA / RINL] | BI01010001010000000000000515BI0100001161 | ||
20 | 9.2 | Upto Ground floor roof level. | BI01010001010000000000000515BI0100001162 | 1.6 | M.T. |
21 | 10 | Plaster (to wall, floor, etc.) with sand and cement mortar including rounding off or chamfering corners, as directed and racking out joints roughening of concrete surface including chipping and application of cement slurry where necessary etc. complete. | BI01010001010000000000000515BI0100001163 | ||
22 | 10.1 | With 6:1 cement mortar. | BI01010001010000000000000515BI0100001164 | ||
23 | 10.2 | 15 mm thick plaster (Out side) | BI01010001010000000000000515BI0100001165 | ||
24 | 10.3 | In ground floor. | BI01010001010000000000000515BI0100001166 | 92 | sqm |
25 | 10.4 | With 6:1 cement mortar. | BI01010001010000000000000515BI0100001167 | ||
26 | 10.5 | 20 mm thick plaster (Inside) | BI01010001010000000000000515BI0100001168 | ||
27 | 10.6 | In ground floor. | BI01010001010000000000000515BI0100001169 | 56 | sqm |
28 | 10.7 | 10 mm thick plaster in (1:4)(Celing) | BI01010001010000000000000515BI0100001170 | ||
29 | 10.8 | In ground floor. | BI01010001010000000000000515BI0100001171 | 67 | sqm |
30 | 11 | Neat cement punning about 1.5 mm thick in wall , dado, window sills, floor, drain etc. | BI01010001010000000000000515BI0100001172 | 41 | sqm |
31 | 12 | Supplying, fitting and fixing Marble Slab/tile of 15 to 18 mm thickness in floor, lobby, stair, landing & treads etc. over 20 mm (av.) thck base of Cement mortar (1:2) laid with white cement slurry @ 4.4 kg/Sq.m before placing marble & jointed with white cement slurry @ 2.0 kg/Sq.m with necessary pigments including grinding and Granite polishing as per direction of Engineering -in -Charge in Ground Floor. {White cement and Pigment to be supplied by the Agency | BI01010001010000000000000515BI0100001173 | ||
32 | 12.1 | With Makrana plain Pink/ Adranga Pink / Garbh Gulabi/ Udaypur Pink / Udaypur Green/Bhaslana | BI01010001010000000000000515BI0100001174 | ||
33 | 12.2 | Area of each Slab/tile exceeding 0.60 sq.m but not exceeding 1.00 sq.m. | BI01010001010000000000000515BI0100001175 | 11.904 | sqm |
34 | 13 | M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. | BI01010001010000000000000515BI0100001176 | 9 | Qntl |
35 | 14 | Priming one coat on steel or other metal surface with synthetic enamel/ oil bound primer of approved quality including smoothening surfaces by sand papering etc | BI01010001010000000000000515BI0100001177 | ||
36 | 14.1 | On steel surface | BI01010001010000000000000515BI0100001178 | 56 | sqm |
37 | 15 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary | BI01010001010000000000000515BI0100001179 | ||
38 | 15.1 | On Steel surface / hi- gloss | BI01010001010000000000000515BI0100001180 | ||
39 | 15.2 | Two coats (with any shade except white). | BI01010001010000000000000515BI0100001181 | 56 | sqm |
40 | 16 | Acrylic distemper to interior wall , celling with a coat of solvent based interior grade acrylic primer as per manufactures specification including cleaning and smoothing of surface. | BI01010001010000000000000515BI0100001182 | ||
41 | 16.1 | Two coats | BI01010001010000000000000515BI0100001183 | 123 | sqm |
42 | 17 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface thoroughly, complete as per manufacturer's specification and as per direction of the EIC. | BI01010001010000000000000515BI0100001184 | ||
43 | 17.1 | One Coat | BI01010001010000000000000515BI0100001185 | ||
44 | 17.2 | Ground floor | BI01010001010000000000000515BI0100001186 | 174 | sqm |
45 | 18 | Protective and Decorative Textured exterior high class matt finish paint of approved quality, composed of specia Tharmoplastic Resin containing fine crystalline additives derive from Granite as per manufacturer's specification anc as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost ol primer. | BI01010001010000000000000515BI0100001187 | ||
46 | 18.1 | Two Coat | BI01010001010000000000000515BI0100001188 | ||
47 | 18.2 | Ground floor | BI01010001010000000000000515BI0100001189 | 174 | sqm |
48 | 19 | Holding down bolt with nut including 100 x 100 x 6 mm plate washer at bottom fitted complete and packing the hole with cement concrete or cement grout as directed. | BI01010001010000000000000515BI0100001190 | ||
49 | 19.1 | 20 mm dia bolt. (600 mm long) | BI01010001010000000000000515BI0100001191 | 40 | nos |
50 | 20 | Supplying, fitting & fixing Industrial Troughed Aluminium sheet (excluding the supporting frame work) of approved make & brand in alloy 3105 conforming to IS: 1254-1991 fitted and fixed with 75 mm & 25 mm Self tapping screw , EPDM Washer 16 mm dia & 3 mm th washer etc complete with 150 mm. end lap and one corrugation minimum side lap.\n(Payment to be made on area of finished work) (Aluminium sheet to be supplied by contractor). | BI01010001010000000000000515BI0100001192 | ||
51 | 20.1 | With 0.65 mm thick sheet | BI01010001010000000000000515BI0100001193 | 132 | sqm |
52 | 21 | M.S. structural works with hollow sections ( square or rectangular shape) conforming to IS: 806-1957 & IS:1161-1958) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1956 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 1957, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. | BI01010001010000000000000515BI0100001194 | ||
53 | 21.01 | For roof ( Span up to 12 Mtr) | BI01010001010000000000000515BI0100001195 | 3 | M.T. |
54 | 22 | Galvanised iron sheet ridging fitted with necessary bolts, screws, washers etc complete.(225mm end lapping) | BI01010001010000000000000515BI0100001196 | ||
55 | 22.1 | 300 mm lapping each way with 0.63 mm sheet | BI01010001010000000000000515BI0100001197 | 16.5 | Mtr |
56 | 23 | Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. a) In ground floor including roof. | BI01010001010000000000000515BI0100001198 | 5 | cum |
57 | 24 | 125 mm. thick brick work with 1st class\nbricks in cement mortar (1:4) in ground floor. | BI01010001010000000000000515BI0100001199 | 56 | sqm |
58 | 25 | Supplying and laying Polythene sheet (150 gm / sqm ) over damp proof course or below flooring or in foundation trenches . | BI01010001010000000000000515BI0100001200 | 23 | sqm |
59 | 26 | Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbow, nipple, long screw, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accessories, specials. Payment for painting will be made separately) | BI01010001010000000000000515BI0100001201 | ||
60 | 26.1 | 15 mm. dia Medium Quality | BI01010001010000000000000515BI0100001202 | 5 | metre |
61 | 26.2 | 25 mm. dia Medium Quality | BI01010001010000000000000515BI0100001203 | 30 | metre |
62 | 27 | Supplying fitting and fixing brass ferrule including connection with G.I.Pipes of TATA make of following dia and upto 450 mm long with screw jamnut, sockets etc. compalete in all respect, including cutting trenches in all sorts of soil and filling up the trenches as per direction of the EIC.[25 mm dia] | BI01010001010000000000000515BI0100001204 | 1 | Each |
63 | 28 | Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only) | BI01010001010000000000000515BI0100001205 | ||
64 | 28.1 | 25 mm. | BI01010001010000000000000515BI0100001206 | 2 | each |
65 | 29 | Supplying, fitting and fixing Bib Cock CP short body (Equivalent to code no 512 & Model - Tropical of ESSCO or similar branch) 15 mm \n | BI01010001010000000000000515BI0100001207 | 2 | each |
66 | 30 | Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. Brackets on 75 mm. x 75 mm wood blocks,C.P. waste fittings of 32 mm dia, one approved quality brass C.P. pillar cock of 15 mm dia, C.P. chain with rubber plug of 30 mm dia, approved quality P.V.C. waste pipe with C.P. nut 32 mm dia, 900 mm long approved quality P.V.C. connecton pipe with heavy brass C.P nut including mending good all damages and painting the brackets with two coats of approved paint. | BI01010001010000000000000515BI0100001208 | ||
67 | 30.1 | 450 mm. x 300 mm. size | BI01010001010000000000000515BI0100001209 | 1 | each |
68 | 31 | Supplying fitting and fixing plaque made of Granite slabs ( single piece) of 15 mm to 18 mm thick with uniform texture and without decorative veins in facia etc fixing with using Cement slurry at back side of granite @4.4 kg/sq.m and white cement slurry for joint filling @1.8 kg/sq.m.including making lettering , sign marks etc as per direction in the granite slabs with fixed at brick wall (in 1:6) as directed including earth cutting , 75 mm thick sand filling , 75 mm thick Cement concrete (1:2:4) and plastering with 20 mm thick sand cement mortar (6:1) as specifed by the Department including wall putty , Acrylic primer & Super Protective 100% Acrylic Emulsion two coats including all incedential charges for labours , materials , machinaries & transportig charges complete in all respect as per direction of EIC. | BI01010001010000000000000515BI0100001210 | 1 | Each |
69 | 32 | Supplying PVC water storage tank of approved quality with closed top with lid (black-multi layer) 1000 lt. capacity. | BI01010001010000000000000515BI0100001211 | 1 | each |
70 | 32.01 | Labour for hoisting P.V.C water storage tank from G.L. to the roof upto 1500 lt. capacity. | BI01010001010000000000000515BI0100001212 | ||
71 | 32.02 | Upto 1st story from G.L | BI01010001010000000000000515BI0100001213 | 1 | each |
72 | 32.03 | Labour for punching hole upto 50 mm dia. | BI01010001010000000000000515BI0100001214 | 3 | each |
73 | 33 | Sub-Total | BI01010001010000000000000515BI0100001215 | 1 | nos |
74 | 34 | GST-12% (SGST=6% & CGST=6%)ADD | BI01010001010000000000000515BI0100001216 | 1 | nos |
75 | 35 | WEST BENGAL LABOUR WELFARE CESS =1% ADD | BI01010001010000000000000515BI0100001217 | 1 | nos |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail